manually start the diagnostic policy service 5 error: access denied

Cannot start manually diagnostic policy receive error 5: access is denied.  I can not connect to wireless internet or start my firewall.

Hi tankrum,

The article below describes the problem faced by you. Click on the tool of automated troubleshooting described in the article below to solve the problem.

Some services do not start in Windows Vista

The problem should be gone after running the troubleshooter.

Kind regards

Shinmila H - Microsoft Support

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • service or group of addiction was able to start; Cannot start the diagnostic policy service

    I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

    Hello, Lesley

    Thank you for using the Microsoft answers Forum!

    The following information is taken from:

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

    It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

    Let us know if that helps.

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The diagnostic policy service 5 error: registry will not accept permissions__

    A lot of my services will not work because they are dependent on the th diagnostic policy service. When I try to read the dependencies on the DDA, I get "critical error from WMI. I have spent many hours, as a result of many suggestions, but still cannot solve this problem. Lately, I've made the change Reg suggested in this forum, add TrustedInstaller to settings. I clicked to give total control, but when I clicked 'Apply', the check for permissions marks have been removed. I did it five times with reboots. The registry does not accept these amendments. Can you please specify?

    HI Joan,

    I recommend that you check your profile for corruption:

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The diagnostic policy Service 2 error

    So, recently, my PC was off, due to the fact that little milk poured on him, (drops) this has my PC down, on a style screen Popes starting cmd and begins to browse my PC and deleted files, it was not a virus because I had anti virus running 24/7 and would like to notify me if there is , but aparently it deleted a dossier on the service strategy diagnosis and I do not know how to retrieve, iv tried to do a system recovery PC but it does not, iv tried to download a file .reg for her and it didn't work, so is there any other way for me to retrieve the file Diagnostic Policy service?


    Thanks for the update.

    We can refer to the article below and check if that helps.

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • Error 5 in Services.I trying to start the Diagnostic Policy Service.

    Cannot start political diagnosis Service.ACCESS NIÉ window appears. I am trying to run Diagnos and Repair.I think I badly configured in the properties of the PERMISSION settings.

    Hi paulyalejo,

    The error means "access denied." This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Please follow the steps in the KB article below:

    For the service 'Service of diagnosis political', the problem may occur when the Trustedinstaller account is missing permissions for the key below:


    Is the necessary permission: full control, read. Follow the resolution given in the link above.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows could not start the diagnostic policy service error 5 access is denied

    This started happening when I accidentally turned off my computer while it was the starter.

    I tried sfc/scannow, I did the CMD (net localgroup administrator) thing and tried manually from politics, nothing helps.

    Here is a screenshot of what, in my view, seems to be the problem. I am the only administrator of my computer,

    Hi John,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    You made any hardware or software changes on your computer before the show?

    Thank you to provide detailed information on the issue and your efforts to resolve.

    This problem can occur for the following reasons:

    -Windows Firewall is not defined by default.
    -Windows Firewall does not start.
    -Windows could not start the Windows Firewall.

    I suggest you try following the steps provided in this Microsoft article knowledge based and check if it helps.
    Some services do not start in Windows Vista and Windows 7

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • How do you re - start the diagnostic policy Service that is not running now?

    I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

    I can't update windows 7. I can't use my laptop wireless because it won't work if it is directly plugged into the router because of this problem and I can not access several programs. How can I get the Service of Diagnostics policy to start running again. Please, help us!

    I finally found the answer to this and if you are looking for yet are simple, but you never know for making trouble.

    Start a command prompt, and then:

    net localgroup administrators / add networkservice

    and then press ENTER.
    Then type:

    net localgroup administrators / add localservice

    and then press ENTER.
    Then type:


    and then tap on enter, and then restart your computer.

    Open services and make sure that the service is started.

  • Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

    Windows cannot start the Diagnostic Policy on Local Computer Service?

    Original title: error 1079

    Hi Craig,.

    Thanks for posting your question in the Microsoft Community.

    From your post, it seems you are getting and error 1079.

    The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

    What service are you trying to start?

    We will follow the steps in this link and check if this solves the problem.

    Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

    Thanks for posting the result and let us know if you need help on Windows.

  • 'The diagnostic policy Service is not responding' after updating iTunes

    I received error message 'The diagnostic policy Service is not responding' since my wife click and ran an update to iTunes. I tried to remove iTunes and restarting, the system restore and sfc/scannow. Any other suggestions?


    I suggest that you follow the steps below and check if the problem persists.

    Step 1:

    a. Click Start, type "Services.msc" in the search box, and select 'Services '.
    b. search for 'Diagnostic policy Service' and right-click and select "Properties".
    c. now, restart the service as well as addiction services

    Step 2:

    Test the issue in a clean boot State, and check if the problem persists.

    Note: Follow step 7 to your computer as usual.

  • Restart the diagnostic policy service

    logged in as administrator. try restarting the diagnostic policy service. Get the system 5 - access denied error


    To restart the diagnostic policy Service click 'Start', type cmd , then right click on cmd and select "run as Administrator".

    After it opens type following commands

    net stop dps and press ENTER, and then type

    net start dps and press ENTER.

    Hope this helps,

  • Sims3-message-cannot start the game 0x039e8474 service initialization error

    someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

    [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]


    Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

    I suggest you follow the steps mentioned in this article about this.

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    If the problem persists, you can post the question in the Sims3 community forums.

    Hope this information helps. Response with status so that we can help you.
  • Windows cannot start the Diagnostic Policy on the local computer service

    Error 1079: The account specified for this service is different from the account specified for other services running in the same process.

    Not sure, but sounds similar to this old post -

    who can help or give some advice in the right direction at least. Good reading (Handbook for your service) and see what you think.

    If you change whatever it is, try to note what change you or save your PC first, so you can change it if it does not help.

    OR, if it has recently started to happen, try a restore point to a date just before that the problem started.

    If this isn't the case, I hope that someone else will offer you something to try soon.

  • Wireless not working and from "diagnostic policy service" gives error 1053


    I have a problem with the connection to wireless internet. The router is working because I can get online to other computer and iphone. The question seems to be from my laptop.

    Laptop: Sony Vaio VPCEA
    Windows 7 Home Premium

    I was able to connect to the wireless using this laptop last night, but today in some sort it has stopped working. When I try to connect it says "restricted access". I have tried rebooting, removing the memory and of course Google wireless network, but nothing seems to work.

    When I tried to solve the problem, it says "diagnostic policy service does not work. So I went into Services and tried to turn it on (START) "Political diagnosis Service" but it gives me "error 1053: the service has failed to demand launch or control in a timely. I read online to install .net Framework 1.1 service Pack1 to get rid of this problem. But which is not supported by Windows 7, the more I installed 4.0 Framework, which should have taken care of this problem.

    Another suggestion is to disable the firewall and I noticed that my firewall is already turned off and I can't turn it on. I had the external anti-virus software, which I removed for this problem, but nothing works! When I tried to turn on the Firewall Services' Windows I get an error 1068: the dependency service or group could start. Dependence are: Base filtering engine and Windows Firewall authorization driver. Who do not start.

    I tried fixing the registry using the Wise Registry Cleaner. Clean something, she has not fixed any problems yet.

    Help, please. I'M FRUSTRATED!

    Thanks in advance!

    Hi bberringer,

    The original message has been able to resolve error 1053 by reinstalling Windows. If you have not reinstalled Windows, I would say the following steps before you spend money on the circuit board. If you already try reinstall Windows and always have failed, I suggest the internet search (or the site of the manufacturer if your computer is a Dell, Acer, HP, etc.) for the same or a Platinum compatible as prices can vary according to your computer brand and model.

  • Windows 8 - unable to connect to the internet - the diagnostic policy service is not running

    Have new laptop acer with windows 8 installed - purchase - I could conntect to the internet.  I can no longer connect to the internet - I get the error msg - diagnostics policy service does not work - how to fix this? Thank you

    go to start, search, type :-cmd, right-click on cmd.exe returned and select "run as Administrator" at the prompt, type: -.

    net localgroup administrators / add networkservice
    Press enter, and then type:
    net localgroup administrators / add localservice
    Press enter, and then type:
    Press enter, and then restart your computer

  • Whenever I want to connect to a wireless connection, I have to manually start the automatic configuration service every time.

    always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?

    My OS: windows xp sp3 and I use Dell Vostro1520

    original title: wireless connection problem


    1. right-click on my wireless connection click on -> status
    2. in the window on the general tab, I click on the -> properties button
    3. in the open window in the general tab I click the button -> Configure...
    4. in the open window, I go to the tab Advanced to->
    5. in the ->property: box, I select the element -> WZC managed Ethernet
    6. in the box -> value I selects the item -> Enabled
    7. I click the button OK to-> .


Maybe you are looking for

  • Satellite L10-114 graphics memory

    I have the l10-114, which, according to the specifications on the tosh site should support shared memory up to 64 MB video memory. However, I can only choose a maximum of 32 MB in the bios. I have the latest available bios version. is it a typing mis

  • Satellite L300-1CU / problem with the start-up of the machine

    Hi people, Today, when I turned on my computer, I met a message: * "Could not start Windows. A recent hardware or software change might be the cause.* * Launch Startup Repair *.Start Windows normally " Now, when I choose launch start up repair, he sa

  • "Setup error!... LiteHtml.dll dynamic link library.

    Can someone please help with this error massage that appears after trying to install the Autodesk software from a USB... "the product entry point? "SetComboBoxLocAndDropDownHeight@CtrUtil@@TAHAAV?$CComboBoxT@VCWindow@ATL@@@WTL@@IHH@Z found in the Lit

  • Failure to reinstall Vista, now my laptop will not boot.

    Hi, first off thanks for any help, it is greatly appreciated. I have a Dell Inspiron 1720, which I've tried to reinstall Vista, installation seemed to go fine until what seemed the last step where it says "installation complete" how it seemed to make

  • How to hide the keyboard by programming in storm 9500?

    Hello I noticed that in 9500 storm (which has touch screen) when the application to start some kind of EditField or Manager, and then when I want to run it, the application window takes only half the screen device. the other half is taken by the keyb