Map chart and power, can someone help me please?
Hello everyone so I bought the new Dragon Age game: Inquisition for my pc and the computer is only around the age of 2 months, but the game is slow so my graphics card is not powerful enough, and I can't understand map of what chart or power supply for that will be compatible with my computer. I see I'm going to need them both.
specifications of the PC
"HP Pavilion 500-223w desktop PC (ENERGY STAR)
Product number: F3D69AA
8 GB ram
150 mm x 140 mm x 86 mm (5.9 x 5.5 x 3.4 inches) power supply 300wat (I want to upgrade)
Hello
I ran a simulator for Dragon Age: Inquisition and the processor and the memory of your 500-223w HP meet or exceed the recommended requirements. However, the video on your PC does not meet the recommended level even at 1024 by 768 resolution. The 750 NVIDIA also would not meet the recommended requirements even at 1024 by 768 resolution.
The power supply should be replaced to support a graphics card that meets the recommended requirements.
The Corsair CX600would be a great choice because it fits the HP power existing dimensions. $65
TheAMD R9 270would exceed the recommended requirements for Dragon Age: Inquisition. They are on sale from $100. Make a measure within yiour PC. This Sapphire R9 270model would be a good choice for discount afer $130
Tags: HP Desktops
Similar Questions
-
I lost all the photos, files and programs, can someone help me please?
I did a system restore (I think) and lost all the photos, files and programs. Can someone tell me please how do I get back them?
LillieLooks like your user profile has been corrupted in some way and XP connected to a new profile. This means that when you connect, you see one of your stuff and can be also lack all the other programs you may have installed previously.
Note that the system restore do not know or care about the personal files on your system.
Unless there's a disaster or instead of a system restore you done a system recovery files would be still on your system somewhere - you just find them... and when you find them, you can correct what happened. If you have made a recovery of the system instead of a system restore, then all is lost and you need to recover from a backup.
Have you performed a search of Windows to see if you can find some of these photos and files? For example, you could search for something like "Resume.doc" or a file name that you remember exactly to see if it is anywhere on your system and where it is.
Why don't you get in Windows Explorer and (assuming that XP is installed on your C drive), navigate to this folder:
C:\Documents and Settings
Below, you will see that each user on your system has their own folder for their personal belongings. You will see also some folders listed user that you do not recognize, but that's normal.
Under the folder of each user, there is another folder, as "Documents of Jose" and under this 'Jose music' and «De Jose Pictures» Dig a little and check them all to see if you can find your missing stuff.
Just take a look in the Control Panel, add/remove programs to see if "missing" programs are still installed, but all not available when you are logged in (you don't have to 'do' something - just look at).
Assuming that you can find your missing stuff, determine where we (which will make feel you better knowing that it is not really gone), then report back and someone can help you straighten things.
-
I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?
To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/
-
I downloaded 4 FF and now 5 and nor with my screen looks nothing like it says on the page of FF. For example, I don't have the orange FF tab in the upper left corner, I have no "PIN as app" option, nor do I view. Can someone help me please?
To get the orange FF tab, go to view > toolbars > menu bar. This should uncheck the menu bar giving you the orange button.
Panorama is a box made of 4 gray rectangles which should be on the far right, if not once you activate the orange FF tab, right click anywhere on a toolbar that doesn't has nothing to this topic, and you should get a menu with a list of your toolbars that you can check and uncheck the box. Come on down to personalize everything down and it will open a window with all your buttons. Find groups of panorama/tab button and drag it to the toolbar of your choice.
to pin a tab as an app, right-click on it; It is an option in the context menu.
-
Can someone help me please? my email has been hacked and my password was changed, I don't know what to do, please help someone
Hello
If you are referring to the problems of hotmail please repost in hotmail forums
http://www.windowslivehelp.com/product.aspx?ProductID=1
Consult with Microsoft Certified SolutionsClick on the links to go directly through your chemical below problem -
Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer. I made attempts at veveral to install it and I lose connection every time. Since I was on a package of data plan with at & t, I have buy the data each month. I consume ALL my data. To be a better way. Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer. I made attempts at veveral to install it and I lose connection every time. Since I was on a package of data plan with at & t, I have buy the data each month. I consume ALL my data. To be a better way.
I am well aware I could you bought the disc version. I bought the software Officemax in Vicksburg, MS I thought that the disc was included in the box.
-
l accidentally changed the info in the upper left corner of my pic in Lightroom to display the parameters of the camera and prefer would be - it to show pixels. Can someone help me please change it back? l have no idea what l knocked on
to change to the 1st place.
Hi VickeyD,
Please 'I' on your keyboard again.
You can change these settings in view > view options
Concerning
Assani
-
When I try to install Adobe Creative Cloud stops, stops at halfway of the installation point and closes. (The download is also very slow) can someone help me please? Thank you!
Please, try the following steps:
- Uninstall Adobe CC (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
Guinot
-
I tried to open my creative cloud and he said, it has been updated, but there was no progress. Then I tried singing and signing in and there is still no progress. Can someone help me please?
After the closure of these processes you can restart your machine and try to install creative cloud.
Waiting for your response.
-
Its me took 3 days to the presenter bought, I finally got it
After that there's now work I talked to 3 people online support person can help
It sounds like a joke at this stage
Can someone help me please
His request than me for the serial numbers, but I buy per month
Hello
This could be due to a host file incorrectly configured as hosts of operating system files map the hostnames to IP addresses. A misconfigured hosts file can affect the ability of your computer to connect to the Adobe activation servers.
Follow these steps to see if there is a problem with your hosts file and if necessary
Please follow the steps below:
- Click Start > run, type % systemroot % \system32\drivers\etcand press enter.
- Right-click on the hosts file, and then select Open. Select the application Notepad open the hosts file.
- Save the hosts file: choose file > record under, save the file as hosts.backup, and then click OK.
- Look for the hosts file for entries that refer to adobe (for example, 127.0.0.1 activate.adobe.com, or 127.0.0.1 lm.licensing.adobe.com) and delete these entries.
- Save and close the file.
- Restart your computer and try to turn it on again.
Kind regards
Sharad
-
I need to uninstall the iTunes 12.2.0.145 in Windows 7-32 bit, but I don't have the installation of this version files. Can someone help me, please?
The problem lies in a PC with Windows 7 32 bit
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.
More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.
Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.
TT2
-
Unavailable Windows Firewall...
I need to reinstall it on a Windows XP Professional (SP3) but cannot find how - can someone help me pleaseTo install the Windows Firewall, follow these steps:
- Click Start, click run, type cmd, and then click OK.
- At the command prompt, type the following command and press ENTER:Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
- Restart Windows,
- Click Start, click run, type cmd, and then click OK.
- At the command prompt, type the following command and press ENTER:Netsh firewall reset
- Click Start, click run, type firewall.cpl, and then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.
-
I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
Can someone help me, please?Hi JohnMcLarnon,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.
1. what happens when you try to install, summers - get you any error message or error code?
2 is the issue limited only during installation AutoCAD?
3. have you made changes on the computer before this problem?
I suggest you to see the steps in the following Microsoft article and check if it helps.
Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0
Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
I just bought an update of Windows Starter7 Windows Home PREMIUM 7 I can't find the upgrade button. Can someone help me please
If you have purchased the upgrade using Express upgrade, the product key should have emailed to your account you used to register for the upgrade.
Also:
Find your key product if your purchase of Microsoft Store:
http://store.Microsoft.com/Help/FAQ?Err=T2#AT2Contact the Microsoft store:
US: http://www.store.microsoft.com/Help/Contact-Us
1-877-696-7786
Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-UsMicrosoft:
Why should I use my Windows Live account or create a new one?
Using your existing Windows Live account, or create a new account will give you access to your key product at any time online in the future. It is important to use an account and a password which you are familiar with to allow you to get easy access to your information and to receive the confirmation e-mail which will include your product key.
Will send me you a confirmation email with my product key?
Yes. An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
What happens if I lose my product key?
If you lose your product key, you can return to
www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
-
Hi team, I have a question about Ad lightroom, can someone help me please?
Hi team, I have a question about Ad lightroom, can someone help me please?
I'm sure that you need to access the original to "Edit in photoshop" NEF files Smart insights are not good enough for that.
If you do just adjustment and cropping, you don't need photoshop.
Maybe you are looking for
-
How to open a project in FCPX 10.2.3 of the one who was created in 10.1.4?
-
HP Officejet 7612: Printer reached its connection limit to the computer.
Install us the printer HP Officejet 7612 for 20 computers. And we get the problem with the error: Please, help us, is there a limitation of this printer on the network?
-
What is the syntax to create segments?
Hellosegment can be created manually as table space? If Yes, what is the syntax to create the segment?Concerning
-
audio in my sony vaio laptop off – "no speakers or head phones are connected.
the sound icon shows a cross-reading. When I keep the cursor on the audio icon, a message appears saying: "no speakers or head phones are connected. Please help me to fix this. Response to the merger: http://answers.microsoft.com/en-us/windows/forum/
-
Cs6 Adobe install problem, can not the initials
I try to reinstall it on another PC but get errror:Installation program could not be initialized. Get Adobe support Advisor for registry problems. »That does not