Similar Questions

• Map chart and power, can someone help me please?

  Hello everyone so I bought the new Dragon Age game: Inquisition for my pc and the computer is only around the age of 2 months, but the game is slow so my graphics card is not powerful enough, and I can't understand map of what chart or power supply for that will be compatible with my computer. I see I'm going to need them both.

  specifications of the PC

  "HP Pavilion 500-223w desktop PC (ENERGY STAR)
  Product number: F3D69AA

  8 GB ram

  150 mm x 140 mm x 86 mm (5.9 x 5.5 x 3.4 inches) power supply 300wat (I want to upgrade)

  Hello

  I ran a simulator for Dragon Age: Inquisition and the processor and the memory of your 500-223w HP meet or exceed the recommended requirements. However, the video on your PC does not meet the recommended level even at 1024 by 768 resolution.  The 750 NVIDIA also would not meet the recommended requirements even at 1024 by 768 resolution.

  The power supply should be replaced to support a graphics card that meets the recommended requirements.

  The Corsair CX600would be a great choice because it fits the HP power existing dimensions. $65

  TheAMD R9 270would exceed the recommended requirements for Dragon Age: Inquisition. They are on sale from $100.  Make a measure within yiour PC.  This Sapphire R9 270model would be a good choice for discount afer $130

• I3 4130 map graphics and Power supply

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  Andrew, welcome to the forum.

  andrewmorgan98 wrote:
  

  Hey guys, I have an i3 4130 with 8 GB of ram,

  http://support.HP.com/us-en/document/c04119419

  Of course, this processor and ram are good for the game, as I have seen online videos of people playing bf4 and crysis 3. I also want to play these games and cs: GB and dirty bomb and dragon age.  I don't really like playing high heat, the middle is fine for me.  I really want to get a r9 x 270 BC, they are in a large part to the best buy right now.  I will also buy a 650W power supply to go with it. My boyfriend is a geek and can install it for me. I took action, and I can fit such a graphics card or the gtx 660, in my case. [cards that are 10 x 4]

  However, I saw in another post that my motherboard has a connector 4-pin. Is this bad? The website says that my motherboard can support up to an i7 uprade!... So why not other new powerful pieces such as a GPU or a power supply.  I get that HP does not have computers for games. Why would they do a motherboard that can run an i7, but not an equally powerful GPU. I get that HP does not have the gaming PC, but those of office. However, it is the PC in my family study, so I'll try to make it work.

  Another way is for ma to get the GTX 750, because this card has a minimum required 300w power supply.

  http://www.Newegg.com/product/product.aspx?item=N82E16814487024

  A: I definitely recommend that you try the EVGA GTX 750 Ti.  I read a lot of good things about it.  It does not all the connectors extra power on the power supply.  Regarding the PSU in HP computers is lousy, the fact is that they install the power supply that is compatible with the OEM components.  Even if their computer can be upgraded, they design that enable out of the box.  You can try with the current 300W PSU, but if it does not work, I suggest you buy a power supply at least 500W; 600W would be even better for futute upgrades.

  However, a person in another forum said that HP uses cheap power supplies and will not have enough tension on the 12v rail. is this true?  If this way works, I definitely don't go this way as it is easy... also no need external with this map of power cord. However, if my power supply does not have enough Volts on the 12v rail, so I'll just take the graphics card I want and needed food.

  It's really frustrating me because I played some very old games [rtcw, and] with friends on teamspeak at night and my integrated graphics card could handle, but now they are turning on modern games that I can't play and I reallly want to understand this before you go and spend a lot of money. Thanks for any response.

  You can see my answers to your questions above in orange.  As suggested, the GTX 750 it should work for all the games you mentioned.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Update of map chart/PSU (power supply) for Lenovo Thinkcentre A70-7844C1U

  Specifications of the computer:

  Lenovo Thinkcentre A70-7844C1U

  Processor Intel Pentium Dual Core E5500 (2.80 GHz)

  4 GB of DDR3 RAM (upgrading to 2 GB)

  Intel GMA X 4500 (integrated graphics)

  180-watt power supply

  I decided my computer needed some activities if I wanted to play some games like Minecraft and Team Fortress 2.

  I wanted to change my original graphics to something like a Nvidia Geforce GT 220 (minimum 300-watt power supply)

  But then, I realized that my computer power supply was less than the minimum requirement for the new graphics card.

  I was wondering if it was OK to always install a dedicated video card or if I needed to upgrade my diet as well.

  If I need to upgrade my power supply, what do you recommend for me? (budget: $ 100 - $200)

  Thanks, Vguys!

  
  

• Map chart and PowerSupply Upgrade Plus a few questions

  Before you begin, my PC is HP Pavilion p7-1167 c desktop PC.

  I was planning on upgrading my graphics card to a MSI GeForce GTX 760 2 GB Twin Frozr Gaming OC graphics card.

  And either a Corsair CMPSU-600CXV2 600W PSU or a Corsair HX650 650 Watt power supply.

  in any case, on the issues.

  (1) these are compatible with my PC?

  (2) the graphics card will fit in my case?

  (3) this will void my warranty?

  Thank you.

  (1) number and YES... Your computer has a slot of PCIe x 16 v2.0 and the card you have chosen is v3.0 PCIe x 16. This can be retro-compatible. The Corsair CX600 will fit in the case, but you can opt for the CX600M. The CX600M is modular and will help in the management of cables and better air circulation.

  (2) the 760 GTX is a beast, and you may need to get a smaller (shorter map). Open the box and measure along the crack of PCIe x 16 from the back of the housing to the front until you reach an obstruction.  Just below that is the longest card desired.

  (3) No, unless your computer is damaged by installing these accessories.

  Please send BRAVO

• Map chart and Adobe AE and Pr problem

  Hi Folk, I have a big big problem with adobe after effects cc v12.1.0 and first cs6 6.0.5

  I have intel i7 4770 k

  16 GB of ram

  and nvidia gtx 780 latest driver version 335.23 64 bit whql

  Information report by NVIDIA system created the: 16/04/2014-16:33:01

  Name of the system: HOME

  [Display]

  Operating system: Windows 8.1 company N, 64-bit

  DirectX version: 11.0

  Processor GPU: GeForce GTX 780

  Driver version: 335.23

  The Direct3D API version: 11.1

  Level of functionality of Direct3D: 11_0

  CUDA cores: 2304

  Base clock: 1006 MHz

  Memory data rate: 6208 MHz

  Memory interface: 384 bits

  Band memory bandwidth: 297.98 Gbps

  Total available graphics memory: 11013 MB

  Dedicated video memory: 3072 MB GDDR5

  Video memory: 0 MB

  Shared system memory: 7941 MB

  Video BIOS version: 80.80.21.00.42

  IRQ: 16

  Bus: PCI Express x 16 Gen3

  Device ID: 10DE 1004 325519DA

  Part number: 2083 0021

  [Components]

  NvGFTrayPluginr.dll 12.4.55.0 NVIDIA GeForce experience

  NvGFTrayPlugin.dll 12.4.55.0 NVIDIA GeForce experience

  nvui.dll 8.17.13.3523 component of user experience NVIDIA driver

  nvxdsync.exe 8.17.13.3523 component of user experience NVIDIA driver

  nvxdplcy.dll 8.17.13.3523 component of user experience NVIDIA driver

  nvxdbat.dll 8.17.13.3523 component of user experience NVIDIA driver

  nvxdapix.dll 8.17.13.3523 component of user experience NVIDIA driver

  NVCPL. DLL component of user experience NVIDIA driver 8.17.13.3523

  nvCplUIR.dll 7.6.740.0 NVIDIA Control Panel

  nvCplUI.exe 7.6.740.0 NVIDIA Control Panel

  nvWSSR.dll 6.14.13.3523 NVIDIA Workstation Server

  nvWSS.dll 6.14.13.3523 NVIDIA Workstation Server

  nvViTvSR.dll 6.14.13.3523 NVIDIA video server

  nvViTvS.dll 6.14.13.3523 NVIDIA video server

  NVSTVIEW. EXE 7.17.13.3523 NVIDIA 3D Vision Photo Viewer

  NVSTTEST. EXE 7.17.13.3523 NVIDIA 3D Vision Test Application

  NVSTRES. DLL 7.17.13.3523 NVIDIA 3D Vision Module

  nvDispSR.dll 6.14.13.3523 NVIDIA display server

  NVMCTRAY. DLL 8.17.13.3523 NVIDIA Media Center Library

  nvDispS.dll 6.14.13.3523 NVIDIA display server

  PhysX NVIDIA PhysX 09.13.1220

  NVCUDA. DLL 8.17.13.3523 driver NVIDIA CUDA 6.0.1

  8.1 operating system windows x 64

  any other application works very well just those two make up my head from blowing.

  so now the problem itself is

  If I go to c: Program files > adobe > adobe after effects cc > support files and run GPUsniffer

  BUT HIS SUPPORT in raytracer supported cards list

  When I opened after effects cc and I go to prefrences it shows like this

  And when I go to Adobe cs6 first that it does not play back video wenn 'reading acceleration GPU (cuda) mercury engine' is on its in black only and I mean just the sound of the video in the project, so I have to change it to read only software engine mercury.

  the name of the graphics card is also listed in cuda supported cards in the installation of adobe cs6 first directory

  So why please help.

  I found the problem.i am on 2 monitors. 1. connected to gtx 780 and 2. is connected to the motherboard.and, the motherboard uses the separate graphic driver (chart intel) that the nvidia gtx 780 first, I tried to swich intel graphics hd in bios.and it worked then was Gpusniffer able to find the 780 gtx, but I couldn't use one of the monitors cause it was disable to bios.then he came an idea to turn it on again but change the settings in windows.

  so I did a right click on desktop > screen resolution > and select the monitor that was connected to the Nvidia card > make my main screen

  and finally here

  graphics card is the latest driver again and no more problem.

  stupid problem

• Pavilion Elite E9180F new map graphics and power HELP

  Here is my PC: http://support.hp.com/us-en/document/c01752634

  I need to know if these two things would hold inside and the possible side effects of their own being in there.

  MSi GTX 470 (this card is 0.5 inches more upright than the GTS 250): http://ncix.com/products/?sku=51927&vpn=N470GTX%20M2D12-B&manufacture=MSI%2FMicroStar

  Cooler Master 600W PSU: http://ncix.com/products/?sku=52419&vpn=RS-600-AMBA-D3&manufacture=COOLERMASTER

  PLEASE RESPOND QUICKLY! Thank you!

  Everything will be probably, but it's going to be very tight because the size of your cabinet is a small Tower.  The 470 from NVIDIA will put a lot of heat.  You may encounter some problems of movement of heat and air because of the size of your wardrobe.  Open it and take a look and see for yourself.  If you update you have to flow with the side panel or install another fan of the firm.

  Food you mentioned is evaluated to 40 amps on the 12 volt bus.  EVGA GTX 470 recommends eating at least 38 amps on the bus + 12 volts.

• Map chart and PP CS6

  Is the

  ASUS GeForce GTX 660 DirectCU II OC 2 GB graphics card

  compatible with Premiere Pro CS6? I can't find any information on their site or from Adobe.

  Hi Krasney1,

  Please find the link: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#Ad obe Premiere Pro CS6 requirements of information about graphic cards supported for GPU acceleration.

  Kind regards

  Romit Sinha

• Possibility to get a new video card and power supply

  Hey everyone just curious if someone could lend a hand with some questions I have.

  I currently have a HP Pavilion Elite

  Model number: HPE-171f

  OS: Windows 7 64-bit

  
  

  Recently, I was looking around in my computer and I realized that I only have a 460w power supply. From the beginning, I knew I had to get a new power supply if I wanted to update my video card.

  But then I realized that there are a few constraints of size with the case. I was curious if one of the most recent as the GTX 670 Nvidia cards or 660 (when it releases) would fit in this case. With a power supply.

  I know it's an older case so with this question, I was wondering if its even possible/chip just to upgrade the card video and PS.

  Thanks for the help

  
  

  Yes, you can update your map graphics and power for something bigger. The CX500, CX600 Corsair are highly recommended, are favorites of the forum and are known to adapt to most cases of HP. With a length of about 9.5 inches, the graphics card GTX 670 can be tight but feasible in your case... measure along the x 16 PCIe slot and look for potential problems. For more helpful advice, read Guide of Big_Dave of a discrete video card selection .

  Frank

• S1800 - cannot install SP2 as "power required".

  Hello

  S1800-712 Windows XP
  I wonder if someone can help me. I tried to install SP2 and the message "Power" required for this upgrade but the laptop is plugged in, so it is not relying on the battery?
  I tried to take on the battery and installation, same message.
  I have a feeling that the problem is related to the fact that every time I turn on the laptop, on his boots upwards then before the login screen windows appears that he goes into hibernation, I can press the power and then button sparks in life and go to the login screen. The battery should replace - I ordered an and will try to reinstall sp2
  Do you think my power settings are corrupt?
  Thank you

  Hi Richard,

  You use the utility Toshiba Powere management rather than the Microsoft option?

  If yes I will try to re-install the Toshiba utility, then goping through various power options to ensure that you are running on current alternative.

  You can also get back to you the options of Microsoft Power even if they lack the flexibility of the version of Toshiba.

  HTH

• Looking for an AC adapter and power cord for a HP Pavilion 2 p-1105, PN:QW819AA. Parts order fiasco.

  Not my computer, but my father, apparently he has lost the power adapter and power cord before he surrendered.

  I have never had a difficult experience find a part, it's like the HP support site is this circular black hole. I understand that this isn't a standard power supply, but HP power cord... Seriously, why the specifications list and the list is not part numbers.

  Call the customer support isn't much better, was routed from the line parts store to the HP Shopping, back to the parts store channel. Each single representative that I spoke too cannot identify this part.

  a guy tried to tell me everything that I needed was a rope, according to the installation instructions, is not correct.

  At this point, I'm extremely frustrated and very unlikely never recommend or buy an HP product again.

  Here are the specifications of the desktop HP Pavilion p2-1105. According to the specifications of the computer, this model requires an external power supply with the following features;

  External 90W power supply (100V-240V)

  Total wattage: 90W

  Input voltage:

  100-127V/3A (50-60 Hz)

  200-240 v/2A (50-60 Hz)

  Output voltage: 19V

  Based on the HP part Surfer parts list for the product number: QW819AA - model name: desktop HP PAVILION P2 - 1105, the following seem to be what you are looking for.

  HP P/N 213349-001 - cord (black) - three sons, 3.0 m (9.8 ft) long - right taken C5 (F) (Canada and United States)
  HP P/N 619752-001 - food - Ext AC Adpt Lolonis-r RT Angle Connector 90W

  HP P/N 695835-001 - 90W square EPS (Domino) 3 p (which seems to be an alternative to the HP P/N 619752-001)

  Please send Bravo

• How much input power required for MX700 with two cameras.

  Hello team

  Can you please give me a detail on the number of power supply input required for a MX700 with dual screen and two cameras. Is - this device is delivered with a POE injector, integrated for the touch-10?

  Concerning

  Nicolas

  You can check the Cisco TelePresence MX700 & MX800 datasheet for detailed information on power requirements.

  I think that the CTS-PWR-AIR-INJ5 power injector - delivered with the system default when ordered.

  See the diagram below. The power injector is supplied with the device to touch 10 and installed as shown below.

  7 png

  

  Kind regards

  Acevirgil

• try to update the card graphics and power

  Hello. I'm trying to upgrade my hp pavilion p6310f and supply is low for most video cards and I would like to know how I can get that will fit the motherboard, I forgot how different motherboards are the other and ended up buying a diet that would not work with my pc. So just trying to get some info on what might work and others. Also upgraded the video card of the 9100 that comes with it a GForce 210 because it had only 300w to run, but wish to go higher for a 550.

  Hello
  Welcome to the HP Forum!

  Kerzin wrote:

  Hello. I'm trying to upgrade my hp pavilion p6310f and supply is low for most video cards and I would like to know how I can get that will fit the motherboard, I forgot how different motherboards are the other and ended up buying a diet that would not work with my pc. So just trying to get some info on what might work and others. Also upgraded the video card of the 9100 that comes with it a GForce 210 because it had only 300w to run, but wish to go higher for a 550.

  The motherboard of your PC has a standard connector for ATX 24-pin and an ATX connector four.  A Corsair 550 (series of manufacturers) must be exactly what need you. It will have all the capabilities of power required and connectors for your mother and peripheral card. ATX 12V v2.3 specification is the latest standard.

  Kind regards
  Eric

• Need to move virtual machines and power over the other ESXi HA and issues of Configuration of power

  Dears

  Need to move virtual machines and power on ESXi others using the HA and Power Options

  So what are the Options I need activate and deactivate:

  Turn on Vsphere HA

  Activate the tracking host

  Admission control (disabled)

  VM Machine Options

  VM restart priority (medium)

  Response from the host of off the power isolation

  VM monitoring (people with disabilities)

  Monitoring of (high) sensitivity

  Heartbeat of data store (select one of cluster data warehouses taking into account my preferences) of the data store is checked

  On each:

  Start/stop of the virtual machine is turned off

  Please indicate the required Options and on virtual machines, we are not turning on?

  Just to be clear, that VMware HA will only restart the VMS if ESXi hosts fails - or surveillance of the VM is turned on which will be monitors VMs will they crash or suspend and restart the virtual machine affected.

  and just to be clear, that the response of insulation parameter has nothing to do whther THAT HA will work or not - it does come into play if the ESXi host is isolated of the HA - Cluster

  xMotion works only between active ESXi hosts that can communicate with the server vCenter - and if the ESXi host broke down or became isolated and vMotion may not work.

  vMotion is automated with DRS that vMotion will a VM who need more resources to an ESXi host with enough reosurces.

• Cannot convert a virtual machine while it is powere on or suspended. Shut down and power off the virtual machine before the conversion.

  Hi all

  I am currently using preinstalled VMware 7.1 and I try to import a virtual machine, I used to work on my windows XP. Recently, I am using windows VISTA and I am trying to import my VM (.vmx) and I get this error "cannot convert a virtual machine, although it is powere on or suspended. "Shut down and power off the virtual machine before the conversion.

  This virtual machine worked very well under windows XP and VMware 6.5, but now I am not able to import it. Please suggest how I can make this virtual machine running in my VISTA and vmware 7.1.

  I am also attaching the converter file logs and .vmx vmware.

  Thank you...

  Is there a problem with this backup?

  It is possible. How big is she?

  Right-click on the vmdk file in Solution Explorer, then select «Map virtual disk...» "Does it work?

  André