Map Microsoft Tun Miniport

Similar Questions

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• #2 Microsoft Tun Miniport Adapter? Error code 10

  Hello guys! I couldn't connect to internet from my desktop computer. I found this error message for the Microsoft Tun Miniport «»

  Adapter 2 # "describing that the driver could not start. (Error code 10)

  I tried uninstalling the driver and then update but failed...

  I have a Windows Vista 32 bit and the model is SR5703WM

  Any help would be really appreciated :D

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  If the steps above fail I would say that you uninstall the network card and later visit the network adapter manufacturer's Web site and download and install the latest drivers for it and check that it works.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Or Gloria solution try found here

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/trouble-with-Microsoft-Tun-miniport-adapter-2/6d6698df-2b0d-4963-91b3-6f7d86044d64

• Somehow E changed Teredo Tunneling Pseudo Interface Microsoft Tun Miniport map2, how to change it back please?

  Hi all, I tried to figure out why I got with the Teredo Tunneling Pseudo Interface 10 exclamation point error code and the error code 2 adapter 6to4 31, tried to update driver and somehow changed Teredo to Tun Miniport, can someone help me change to Teredo please?  32-bit Pavilion HP running Vista.

  Is something that does not? These errors can usually be ignored.

  http://support.Microsoft.com/kb/932520/en-us

• Problems with Microsoft Tun Miniport Adapter #2 error (code 10)

  The difficulty to stay connected to internet connected then disconnected tried to download the new driver still having problem cant hook up directly to the modem. Don't know much about computers. Under the Advanced tab under ownership of what he says in virtue in white value network address. Is there something that belongs to it? And if so what happens at the end I put there. Under the general tab where it says place: unknown that is what belongs to it? I disabled it for now. Now I get the error code 22. He drives me to drink with all the problems I had. It's my laptop frist, it's one and a half years. What should I do? Help, please! Thank you. P.S. I am running VISTA HOME PREMIUM SERVICE PACK 2.

  OJ1007,
  Thank you for visiting the Microsoft Answers community forum.

  Disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack.  To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.»  Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Let us know if this does not solve your problem.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where are the drivers for "Microsoft Tun Miniport Adapter" (named by the System Diagnostics report), also known as "Teredo Tunneling Pseuso-Interface" (as he is called by Device Manager)?

  Microsoft Corp. has made an extremely simple task almost impossible. All MS don't research drivers, software, etc. for this show no results found. There are dozens and dozens of forums discuss many problems thereby, but not links to downloads for the drivers. Despite the many discussions that say it can't be uninstalled, they are wrong...
  After all appropriate measures in the right order without result, I did as directed and diagnosis. Archbishop of the device with the plan to reinstall later uninstalled...  Now, it is not found on my computer or on MS research.
  I have Vista Home Premium on a Compaq CQ50 Notebook, w / 160 G hd, 2 GB RAM, 1YR & 1 Mo. old.

  ALL I want is a link to download the drivers & or whatever is needed to reinstall this device in good working condition. If this is not possible, please let me know what other options I might have.
  I thank very you much for your kind consideration of this request.

  Hello danjams,

  This is no fault of Microsoft, that a driver problem to the hardware of your system. Microsoft did not make these drivers for your computer. You must visit the site Web of HP/Compaq download all the drivers/software for your make and model of system. Also never leave windows utility updated your computer's hardware. Once you have downloaded them, record them onto a cd for him come in handy should need you the in the future. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Map Microsoft virtual miniport not there windows 8

  Hey guyz.
  I have a samsung laptop with windows 8 pro with wmc 64 bit and want to make it an access point but can't because there is no card miniport virual in my network settings... I used to have when I used windows 7 pro... I used intel my wifi dashboard... I tried to use some software, but the can not share the net... even tried the command prompt. any suggestion would be appreciated

  Thanks in advance

  Hey sharief,.

  Thanks for your reply... I tried the not you, but it didn't work... but I use connectify and it works like magic... where my problem is solved... where my problem is solved. Thanks for your precious time

  Bravo!

• Unable to activate: map Tun Miniport, Microsoft

  I get this message... what to do?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Microsoft-Tun-miniport-adapter-problem/b2afbb50-1dbc-44a2-b549-a36dc300697e

  can help

• Impossible to uninstall Microsoft #2 miniport card

  I have a computer that is running Windows XP.

  I can't connect to the internet from my desktop computer.   My laptop connects via the same DSL modum directly or wireless.  When I open design under network adapters on the desk top manager it shows card no. 2 Microsoft Tun Miniport and a Linksys LNE 100TX (5) Fast Ethernet Adapter.  #2 Microsoft Tun Miniport Adapter has a yellow exclamation mark over it.  When I click on the device or the following message appears "this device cannot start. (Code 10) »

  The troubleshooting guidelines suggest I have uninstall and then reinstall the Microsoft Tun Miniport adapt #2 to fix the problem, but when I try to uninstall the calculation won't and says that the device may be required to boot the computer.

  Can you tell me how can I uninstall this device or do you have another suggestion on how to solve the problem.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Map Microsoft Isatap does not installing driver

  I get a message saying that I have new hardware to install - when I try to install I get a message saying "a driver routine was found, but could not be installed - Map Microsoft ISATAP - a device attached to the computer does not work - search for routine of readers on the suppliers Web site.» (the message is in Swedish).

  http://support.Microsoft.com/kb/932520

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Help, please

  Map Microsoft 6to4, ISATAP Adapter #2, #3, Teredo Tunneling Pseudo Interface, PCI Device do not work in my ASUS k55VM laptop. Code 31 for others and for the PCI device is code 28.

  Hi Amit,

  Thanks for the reply.

  Step 1: Check out the link: http://www.microsoft.com/en-us/download/details.aspx?id=8957

  Step 2: See the articles for the problems of driver on the computer:

  Update drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Note: The article applies to Windows Vista too

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Step 3: Run the hardware troubleshooter

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  To solve the problems of slow computer performance:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=97QYdW2XfTc

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-CA/Windows7/ways-to-improve-your-computers-performance

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=HVhJmdoAiKy

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please let us know the result. If the problem is still not fixed, we will be happy to help you further.

• card uninstall microsoft virtual miniport?

  Comment by permanently uninstall 'card microsoft virtual miniport' pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaase :(

  no way to connect by wifi

  Thank you

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I get Tun Miniport, Microsoft card to work properly.

  There is an exclamation on it in Device Manager, but windows declare that it does not work correctly

  I'm on hp Pavilion dv6000

  Hello

  ·         You are able to go online?

  ·         You receive all code or an error message when you try to connect to the Internet?

  Method 1:

  I suggest you to reset the TCP/IP stack and check if it helps solve the issue.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Method 2: Turn off IPv6

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE:

  You should do this for each network connection.

  Method 3: Disable the DHCP Broadcast Flag

  Follow the link below to disable the DHCP broadcast flag

  http://support.Microsoft.com/default.aspx/KB/928233

  Important:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  You can also try the following items on the advice on common network problems.

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  http://windowshelp.Microsoft.com/Windows/en-us/help/fc58605e-A2be-470C-95b3-6808a76347991033.mspx

  Hope the information will help. Please go back and let us know.