Map of the AREA-6229

I have the PCI-6229 of data acquisition card. I want to work with the card without LabView or Measurement Studio but with Visual Studio Express 2010 - c# and... What do I need other

and how to get it?

When you installed the DAQmx driver, do you really watch what has been installed to support code or simply leave it by default? Do a repair on installation and I think you should be able to explicitly select to install the .NET support.

Tags: NI Hardware

Similar Questions

  • Animation of zoom/dolly in the map of the world, the best workflow?

    Hi all, I'm animating maps for a travel agency and they want me to zoom to a vision of the world in smaller places, like Costa Rica for example. Then animate a few lines and icons on the map in 3D. I've attached a video link of a that I already have. I work with an illustrator maptorian of the world card and import the illustrator file in AE. Can I use a camera to dolly in and making all the moves. My problem is that AE runs VERY slowly when you work with such a giant illustrator file (there must be millions of vectors). I tried to work with PNG files exported, but resolutions should be too big for them not to Pixelize (200 million pixels is not enough!) and then I met the same problems of slowness.

    A second problem I have is with the shadows. because my illustrator file imports as 2800 x 1600 when I Zoom so far (although I am rastoring) my elements are only 1 pixel above the map (or at least this is the unit of measure AE uses even with the base vector files) so as you can see in the video the shadows move around annoyingly.

    Can someone advise me on a path that I could work with a low card-based pixel resolution of the whole world and then zoom in on a small card vector space, that I need to work. Or any other ideas are welcome.

    I'm using a Mac pro running 10.11.6 with 6 core and 16 GB of ram and AMD graphics cards.

    AE is 13.8.1

    Thank you

    The illustrator file is highly textured and takes too much time to calculate, you should cut your chart into segments. I made maps of the world for many years of news and documentaries, to show the world to zoom in on a country and a city. You should separate you graphic into segments. map of the world say 4000 x 4000 pixels for example. and costa rica to 4000 x 4000. now composite costa rica on your map of the world. My guess is that you have a few places to zoom in on so just make these large sizes and place them on your map. If you have a high resolution on a large file low resolution.

    For example, this card I did. I have to get all the way zoomed between the Morocco and the Spain, then completely out to part of the Middle East.

    So I have this model master 1605x905px

    You can see the limits of layers. I carefully place one above the other and resize it down. so I have a map of the area I zoom in to 1313x922px reduced to 60%. now, because I had yet another card on top of these 2 and he had to be reduced to very low values that are more difficult to place, I created a precomp with collapse and inside, there is another card to 2356x1493px 7% nationally.

    This way I can cover on the other and do not have too many pixels at the same time.

    Another example more complex because it contains more elements which must be organized differently to support a fine composition on both zoomed in and zoomed in on the map.

    same idea. This type of card is dissolved in as I crash zoom

    This guy a precomp with many items I can carefully place if the composition does not suit me perfectly.

    Fun, right?

  • I would like to know how to redownload the area of map imed on my computer, I got to it before that I had to restore my computer but now he tells me he is not compapable, why is this?

    my computer won't let me download the area of map Sanchez or Captain 10 print since I had to restore my computer to magf settings and I got here before that and had no problem with it, can someone please explian why or help me solve the problem that I really love both the progams and used them both much thanks.

    Hello bashfulunicorn,

    You should check with the manufacturer of the software if it is compatible with Windows Vista. My research I found that the PrintMaster 10 is designed to work with Microsoft Windows 95/98/NT/2000, so in order to to use with Vista, you should try to install iwn compatibility mode.

    Run the program compatibility Wizard

    1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

    2. follow the directions in the wizard.

    See the bottom of the article for more information on this:

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

    I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

    I have not tested, but it should work with Lightroom:

    http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

    Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

  • Updated to 39.0 curser now do not show marker titles in the API Google maps unlike the previous version, what has changed?

    If you open this link http://edwardfrey.com/map/2015.html a map with markers. When my cursor hovers over the mark a title appears. If you click on the marker of a pop up will show newspaper when you click will opens a page of newspaper on the date indicated in the pop - and there will be a map included in Scripture upwards to this day here.

    The roadmap also has markers with titles. Before 39.0 I could hover and see the title, now I can't. When I move the pointer to the marker cursor turns into a hand, in the previous 2015 map the cursor turns to a pointing finger.

    Example: Click on the marker - 0 - then log. This web page http://edwardfrey.com/peregrinating/period61.html#11
    December 11, 2015 with a map showing the three markers that all have the title but I can't see them.

    I fixed my problem FireFox 39.0 title of marker. I started using Internet Explorer 11 for all of my web site work and evidence/change what I did. About a third of the visits to my site, use FireFox although I don't know how use the 39.0 version. The problem of the title existed before it got worse and there are probably few of these FireFox users each glance at my cards yet less hover over the marker to see the title. Problem solved!

  • Because I downloaded 29 FF, it comes with a map of the world continually and wants me to complete a survey.

    When I log on FF29 web home page gives me a map of the world which then requires me to respond to a survey that I did once, but he continues to repeat. I had to go to Google Chrome because of the nuisance and the loss of time.

    Also FF29 does not seem to recognize PDF forms for printing when they are attachments to emails that I want to print.

    You can also set the browser.aboutHomeSnippets.updateUrl pref (topic: config) an empty string to prevent Firefox to new excerpts from loading from the server and the default code snippets is displayed. That's what I usually do.

  • Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

    Why I always get direction is not available when you use maps for the iPhone 6 more?

    Currently I live in the Qatar.

    Hi Alison, Sameh

    The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
    Take a look at the link below for more details on what features are available in the Qatar.

    iOS 9 feature availability
    http://www.Apple.com/iOS/feature-availability/

    Nice day

  • TomTom map is wrong in vietnam, pls use google map for the ios update, thank you

    Map of Tomtom is very bad in vietnam, please use Google map for the ios update, thank you

    We are fellow users on these forums, not support nor Apple iTunes.

    TomTom are responsible for their own data to the card, if you have problems with their app and/or cards that you have tried to contact them?

  • Measurement of the temperature with the PCI-6229

    I was announced in an old thread and do not receive and answer, so I thought I try a new.

    Link to the old thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=14920&view=by_date_ascending&page=1

    I'm trying to measure temperatures using thermocouples using the PCI-6229 and I use two SBC-68LPR to make the connection.  They are not reference on them joints.

    After moving down from enugh to careful reading of the old thread I mentioned above and I think I knew what I should do.  Here's what I do now:

    Create a task - DAQmxCreateTask

    Create a channel for this task - DAQmxCreateAIThrmstrChanVex thermistor

    Create a number of channels of thermocouple for this task (DAQmxCreateAIThrmcplChan) using the cjcsource DAQmx_Val_Chan option and specifying the string thermistor as the source channel

    Start this task - DAQmxStartTask

    Get the temperatures - DAQmxReadAnalogF64

    Stop the task - DAQmxStopTask

    Disable the task - DAQmxClearTask

    I have not yet hooked, but I doubt that it is the cause of the error.

    A few more details (pardon my Delphi):

    Create the channel of the thermistor

    TmPcName: = ' Dev1/IA.19 ";

    Secret: = DAQmxCreateAIThrmstrChanVex)
    TcTaskHandle, / / task handle
    @TmPcName, / / physical channel name
    @TmChName, / / name of channel
    -80,                                   // Min range
    80,                                    // Max range
    DAQmx_Val_DegC, / / units, ° C
    DAQmx_Val_ResistanceConfiguration_4Wire, / / 2-wire, 4-wire, etc.
    DAQmx_Val_ExcitationSource_External, / / source of excitement, external
    1, / / value of excitement
    9.376e-4,                         // a
    2.208e-4,                         // b
    1.276e-7,                         // c
    30000);                            Resistance of reference

    Creation of the channel of thermocouple:

    TcPcName: = ' Dev1/ai23;

    Secret: = DAQmxCreateAIThrmcplChan)
    TcTaskHandle, / / task handle
    @TcPcName, / / physical channel name
    '',                                     // Channel name
    0,                                    // Min range
    1000, / / Max range
    DAQmx_Val_DegC, / / units
    DAQmx_Val_DegC, / / type of Thermocouple
    DAQmx_Val_Chan, / / source CJC
    25, / / value of CYC, so DAQxm_Val_ConstVal
    @TmPcName);             CJC channel, so DAQxm_Val_Chan

    It looks like 4 scales is required for voltage excitement thermistor measurements.

    In addition, it seems that external excitation is necessary in my case, PCI-6229.

    Everything works if I use a CJCConstant.  When I do this I use the same code to create channels of thermocouple, but I spend creating the channel of the thermistor.  When I try to use a CJCChannel I get an error saying "value required is not supported for this property value," which occurs when I call DAQmxStartTask.  I don't have no idea of what this message refers to and the best I can tell the properties that I've specified sense.  The constant termistor are from actual thermistor, that I found on travailleursduweb.com.

    I could also use some help to know how to connect the thermistor.  Looks like I need to fab, a thermistor circuit myself, with a stable voltage to power the termistor and use a double-ended analog and reference to the channel.

    Thank you

    Mike

    The error of thermocouple type was a type-o in the post.   Thanks for catching it.

    I think I found the problem.

    I wrote a small program to test for Thermistors and I went to using the routine exctation of tension for a common routine of excitement (... IEX instead of... Vex).  I had been by specifying a minimum value less than 0.  I changed it from-80 to 0, and it works now.  However, I got an error in division by zero, intermittently, when you read a thermistor channel.  The error is not in my code.  It occurs when you call DAQmxReadAnalogF64 for the first time and I'm not all mathematical related to this call.  I'm still looking into it.

  • I have a drive mapped to the network, but the icon is located in a folder. I get access denied when I click on the drive.

    I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp

    original title: mapped drive error.

    Hello

    Make sure that the mapped drive is configured to share and works on part.

    Auto-mappage will not work if there is a problem with sharing.

    Maybe this can help.

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted

    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

    In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

    http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  • How to disable the automatic mapping of the network on the windows xp computer drives

    I have a win xp computer, where it has been installed a drive mapped automatically connect after logon.

    How can I stop it automatic mapping of the network after restarting the computer drive?

    At a command prompt:

    NET use / persistent: no
    NET use * / delete/y

    Removes the persistence of the connection and delete all network resources.

    You can be selective with this:

    NET use / persistent: no
    NET use x:/delete

    where x: is the drive letter of map you want to remove.

    Persistent readers are recorded to the:

    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Network\Persistent connections

    John

  • Home folders mapping on the old server and do not synchronize

    Original title: problem individuals file

    Hello world!

    We recently changed files private from the old server to a new users but the problem is that offline files are always mapping on the old server, therefore the synchronization failed.

    Best regards.

    Hello

    The question you have posted will be well suited in the TechNet forums. Click on the link below.

    http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  • How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

    How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

    Hello

    It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

    If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

    PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

    Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

    Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

    -------------------------------
    My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  • Add to contacts to work the perimeter, also citing maps in the scope of work

    I have a native app for BlackBerry 10 for the container/perimter of work.

    I would call add to contacts and also able to summon cards in container/scope of work.

    If I have an application in the work bowl, all invoke applications will happen in the container to work alone? When I make the call, his phone calls in the container to work. Now I need to access email, calendar, cards, add to contacts, and let me know that everything an application in the perimeter of work container will call PIM functions within the perimeter of work only.

    I want examples of code to add to contact and invoking maps in the perimeter of work scope app...

    Really, any help would be apprciated.

    Invocation framework is restricted within the perimeter you call. Therefore, if your application is in the scope of work, you can only call call targets that are also available in the scope of work.

    For contacts and calling card, please refer to this page:

    https://developer.BlackBerry.com/native/documentation/Cascades/device_platform/invocation/invoking_c...

    Shadid

  • BlackBerry Smartphones Blackberry Maps and the India and Google maps and COD 907 error

    Hey! so are blackberry maps available in India yet? do not appear on my curve 9360...
    You can also im unable to download google aps it says Error 907 something on an invalid COD
    any idea anyone?

    Finally, I read, no BlackBerry Maps is not available in India

    And the data source is in fact TomTom, not Google Maps.

    I recommend that you use Google Maps, personally, they are a bit softer and richer than BBMaps.

Maybe you are looking for