Mapping to a Windows 7 disc from a XP platform, it creates the connection but it says "share: denied \Access.»
Original title: mapping to a Windows 7 disc for XP platform
Hi all is there anyone who can help me with the mapping a drive of windows 7 from my xp machine? I shared the drive on the computer 7 and everyone has permissions with full game. I can map other machines windows 7 itself but not some xp machines. I can ping the machine 7 machine xp with the address and the name of the computer. Now when I map the drive to create the connection but it says "share: denied \Access.»
Any help is greatly appreciated.
Update Windows 10 removed my printer software. I downloaded the drivers, but my PC won't will not install because the security certificate for the HP software says windows Defender is not closed or not properly closed. What should I do?
Hi @MixawixaSpoiler (Highlight to read)
What browser do you use? Edge?
Can you try IE or Chrome and see if the problem still exists?
Original title: connection problem
Hello! I recently did a clean installation of Windows 7 Professional 64 bit and I use a wireless USB adapter. Windows says I am connected to the router, but I have no internet access, and I have this yellow on trinagle. Work of all my other Windows 7 PCs, but this one. Could someone help me? Thank you!
Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you are unable to connect to the wireless network after you perform a new installation.
I suggest you to consult the steps described in the article:
You can try the steps in the link and check.
You can update the driver of windows 7 on the manufacturer's Web site.
You can remove and re-create the wireless network connection, follow these steps:a. Click Start, type ncpa.cpl , and then press on Enter.
b. right click on your wireless network connection and then click Properties.
c. click the wireless networks tab.
d. under preferred networks, click your Wireless
network and then click on remove. e. click on view Wireless networks.
f. under management of the network, click refresh the network list.
g. under Choose a wireless network, click the wireless network to which you want to connect, and then click Connect.
If the steps above don't you can uninstall and reinstall the NIC drivers and check with the question.
a. click on Start menu, in the Search tab type devmgmt.msc and press ENTER.
b. right click on network adapters and click Uninstall and restart the computer.
c. after rebooting, install network cards and check with the question.
You can temporarily disable the antivirus and firewall on the computer and see if it helps:Enable or disable Windows FirewallNOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
You can see the following link to disable the Antivirus installed on your computer software.Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareNOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacksPlease follow these recommended steps and post if you still experience the problem. I'd be happy to help you further.
My images from various sources are fine in the library, but when I do develop they are converted into negative.
Go to Preferences, click the performance tab, and then clear the check box
I just want to know if I can make a record of my laptop and restore my desktop computer
I have a compaq laptop with windows 7 on it. I have a desktop computer with Vista on it. He now tells me that Bootmgr is missing. I tried restoring the system nothing happens. I want to just make a record on my laptop to restore my desktop computer that is possible. Computer is not even 2 years old
original title: Bootmgr is missing
Please click the link and download the recovery on your windows machine disc 7
burn iso downloaded to a dvd (using the windows 7 image burn utility) and then follow the steps as indicated in the post above by André.
Nightmare; perfectly working windows 7 64-bit configuration I upgraded (stupidly) to Windows 8 (it seems installing a 32-bit version for my troubles). I installed a driver for a having previously worked USB WiFi adapter (that is, it was working fine before the upgrade) and now it does not start. It says "irql less than equal", says his collection of information and restarts to a kind of repair mode, none of the options which work because he complains that the hard drive is locked. Any attempt to start in SafeMode (SHIFT + F8) fails, with mnode security options panel shows ever in service options. Really, a very incomplete piece of software - I should know better than to install version #1 what whatsoever.
Suggestions for moving forward? No, I don't have a record of victory 8 because I updated my installation of windows 7 perfectly work in updating online.
Simple repair that has worked for me.
If you have a windows install disc (if you borrow 1 from a friend)
run the disk at startup, press on f9 to choose cd rom as boot, press a key when it asks you,
Let the disc to the refreshment of startup repair section, choose Advanced & go to the command prompt and type.
When all this is over, it will show that your o/s and the reader don't worry if it shows as D instead of C, it is because the system resource use C at this point, it will ask you if you want to add this player to your startup type Y and your good to go, your old win 8 will draw upward as it did before spread the word.
I get an error message when the computer attempts to enter the mode 'sleep', after the time runs out of screensaver. It will not allow the pc go to the "sleep mode" and if I try all options listed... it starts then the mode "standby". Sometimes, it appears immediately and I can ignore it by continuing the work at hand.
The message is this: Windows - No disk
Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c
Options: Cancel try again continue
Thank you... Joan
It would be interesting to know what your system brand and model is and what your version XP and the Service Pack, but it's just a fantasy of mine that the Microsoft Answers forum would actually make for such things when a new issue is created. This shortfall in crude in the development of MS Answers forums unnecessarily prolongs solving simple problems.
If you don't see a message like this:
No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c
Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.
Before making changes to the registry, back up your registry with this free and easy to use tool popular:
Click Start, run and enter in the box:
Click OK to open the registry editor, navigate to the following key:
In the right pane, check the value of the ErrorMode setting.
If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).
Click OK to save the changes, and then click file, exit to close the registry editor.
Any error will always be displayed in case view the log, but you won't see any popups
Reboot your system and check the things now.
I'm running OS X 10.11.2.
I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.
So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w
"Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »
I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.
I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!
EDIT: I unfortunately do not back to the time Machine.
Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .
Please after the release of
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.
However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.
Any ideas? Thank you!!
If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I have 2 desktop computers Dell Inspiron 530 s. We're Home Basic and the other is Home Premium. Can I install the award-winning family OS install disc on computer Basic. The base OS has Intel (R) Celeron (R) CPU * address email is removed from the privacy * with 1.00 GB memory. Is it possible to do without having to buy an upgrade of the enuff premium and which would be to support the BONES of premium if it is possible to do?
The recovery discs are for the particular computer, they came with.
If your computer is pre-installed with Vista, it is classified as an OEM license and is not transferable.
The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
You cannot transfer it to another computer/laptop
See you soon. Mick Murphy - Microsoft partner
This happens when I have several tabs. I go to another tab and a window in mosaic appears with a single window of the tab page and the other tab next to him. He became quite annoying.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
I moved the files in Lightroom 5 from one drive to another (created the new folder and dragged). Now I see warning of metadata. What has caused this? Can I import or rewrite the difficulty catalogue?
I am reorganizing lots of photos in Lightroom 5. Some who were on my hard drive, I moved to an external drive. I did all this in Lightroom. I created a new folder on the hard drive, external, selected all the images in the folder on the hard disk, trained to the new folder. Made sure they were there. Then deleted the folder on the hard drive. When I looked in Windows Explorer, the (empty) folder was still on the hard drive, so I deleted it there too. Now, I get the warning on the images in the new folder metadata were changed in Lightroom and an external program. The options are to import from disk or rewrite from the catalog. I would like to know what caused this and how to fix it.
Thanks for the clarification of Nancy.
The warning of "metadata conflicts" is an indication that Lightroom "sees" a discrepancy between the data in its catalog and the data in the image file (or in the xmp file) on the real situation which could be due to permissions at the new location.
You should choose the option to replace the parameters, that is, rewrite in the Lightroom Catalog can write changes to metadata of the catalog itself.
(Import of the disc would cancel the metadata changes that you did until now)
I have my computer to another, here my specs:Intel Core 2 DuoHard drive 500 GB2 GB OF RAMDVD playerFloppy DiskThe operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?
1 did you change on your computer before this problem?
2. What is the blue stop screen error message?
3. When you receive a blue screen during the upgrade?
You can follow the suggestions and then check.
Disconnect external devices connected to the computer?
You can read the article and then check.
Upgrade Windows XP to Windows 7
Windows 7 Upgrade and Migration Guide
I called the customer service. I called the support to businesses. whatever i can I I did but I don't get any solution, right away that these people say that support is not provided for windows 2003 as its being obsolete.
My question is whether the product activation. I bought the license for windows 2003 std ed. At least I need solution for activation, it should be default but nobody is bothered.
Please I ask you people to get a confirmation code to activate my windows server 2003 standard edition.
I enclose some of the screenshots for your information.
We do not work for Microsoft; We are mainly volunteers here.
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
See you soon.
Windows Update keep indicating that there are no available updates but it was 12 days. Isn't this strange?
Check out now!
Microsoft Security Bulletin Summary for October 2010
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
I HATE the idea that ADOBE ME about saving my computer information - they shyness to ask and when NONE they told INSIST upon request ALL THE TIME!I HATE THIS.Is there another program I can set it to play tube you videos? I want everyone to write to a
Right now im having iphone 5s, will I get a new iphone by exchanging this iphone 5s? will I get a discount for the Exchange... ? do I have to pay extra for the new iphone? Please give me some details on this exchange of plans... any advice.
I took on the laptop's DVD-ROM drive and replaced it with the DVD - RW but the laptop it will accept only before the start of WXP. Power gets through to open the drive, but then comes with error # 1 IDE error message. I know from reading some of the
Icant get any sound E-mail address is removed from the privacy *.
Original title: uninstall a program How to uninstall a program that tries to install when I start up my laptop? The program is Roxio Media Manager, it tries to install, however, "Can't find a c ESTAMP file" appears. He continues his attempts to inst