Maritime transport group

Similar Questions

• ATG shippingGroupFormHandler

  Hello

  I use the CreateHardgoodShippingGroupFormHandler to retrieve the user's shipping address...

  and in the next page, I use the ShippingGroupFormHandler applyShippingGroups handle method...

  but it seems to be to get this pipelineError...

  PipelineError: key = ValidateShippingGroupsFailed; Error = following elements have not been fully attributed to shipping groups

  Adding the form exception: ValidateShippingGroupsFailed: the following have not been entirely attributed to groups of shipping.

  I want to know the reason for the error pipeline.

  I thank very you much in advance!

  Hello

  Shaik was correct, your commerceItems are not being assigned to your group of maritime transport.

  You initialized shippingGroups? You can do this by using Oracle ATG Web Commerce - ShippingGroupDroplet

  Please read this droplet and tries to use it to initialize the ShippingGroup set in the order.

  It will be useful.

• How to program the LPC2368 and the LPC2468 using microprocessor SDK?

  Hello

  where to start? I have not found on the site of the corresponding materials.

  Thanks for the help

  Hi knob.

  I suggest a look at the following: LabVIEW Embedded for ARM Porting Guide - Chapter 1: Introduction.  It is a generic document that will explain the process of porting to any microprocessor.

  If you have LabVIEW Embedded module for ARM, I suggest you take a look at one of the models of maritime transport.  There is a model already built for the LPC2468 you use.  And if you do not have the module, you must download the evaluation version to get the model and save yourself a lot of time.

  I hope this helps.

• Refurbished or used 70-200mm?

  Wandering between these two choices. Whitch is better? Anyone used lens refurbished?

  Used from merchant reputible is little different from a refurb. Items are often inspected like refurb, could be repaired if necessary, even only a refurb, and usually comes with a guarantee period moderate, although it is usually less than a refurb. Adorama, B & H, KEH are all dealers reputible and reliable of the gear used.

  Used by a private party is generally a little more risky, but prices are generally lower. As noted above, you should know what you buy and be able to quickly evaluate whether buying in person. Assume that it offers no guarantee, because you probably won't see the seller again.

  If the purchase of private offline - such as some auction sites - games you sometimes little recourse if something is not worth. Above on the auction site sellers in some cases offer modest right of return, although you may be the cost of maritime transport. And there is a way to challenge an obvious RIP-OFF.

  Over the years I bought new dealers, used dealers, used by private parties and refurb... usually not had any problems. Only had a rare problem or two.

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• XPS 8900

  Ordered mine Dec.4, with 2 days delivery.  Each week I get a further delay of the week of maritime transport, currently scheduled for 29, Yes!

  Given history and lack of notifications about that why, I do believe that they will ship it anytime in the near future, it's my last order from Dell.

  I agree!!! Put it in a sale and do not even have? It is simply not true!

• My T7910 came with two bays of processor

  It appeared earlier and I looked inside and of course it has 16 bays of memory and 2 beautiful large bays of processor rather than one that told me to wait with my single purchase of an e5-2650 v3 and 32 GB DDR4 4x8chips XEON Proc. I know tells you all about the goal then I would be surprised and happy right EXTRA? :~) . (I choose to believe that).  :) I was right, because why a unique model number would mother many styles on board!  Different CHIPS maybe but not motherboard! They would just give different number model, 7900 7920 or, with a number of type 7911-has been revised. Otherwise, it would be a nightmare to replace a motherboard. Dell rocks...  More beautiful Machine. that I never set eyes.  I used to own a Convertible PC of Tabler by ASUS called a R1F, when it was released it was called "The LAMBORGHINI of Notebook computers" - well, I gave this Tablet PC to my little nephew to have a computer of his own in his room, and now I have re - claim this expression to invent a nickname for the T7910; my new computer switches! Didn't come with much else though...  None of the drives. (I hope that this optimization of Dell for Autodesk 3Ds Max software, they talked, is on the Dell.com site.  There is the Windows key, so all I need is a disc to install Windows $10...  I asked; a DVD of resources as well as the Energy Star AND one of the "change 5.25" to 2.5 "bays free install Kits. But I hope that if they send a Correct Power Supply, etc, the kit of disk resources and 2.5 "can come with it. (no idea if they are welcome?  up and down, they promised that the Energy Star Option would be included before shipping...  I don't want the "Chrism" bug - if he's out and about he will see this and answer, otherwise he is held in any case...   I'll give you tech a call now that I have a sticker (somewhere) that apparently allows me to get to them for the first time again.) (which should make a difference, I hope.). On the Energy Star 6 option... Maybe if I ask you once again, someone can answer and not tell me that I'm not allowed to know because all the information "are owners'., (so they said right before the last dark ages,..): what I'm now missing (in terms of Energy Star compliance), they said they would put in and didn't?  It IS JUST the power SUPPLY? or the whole of the machine that receives Energy Star treatment and I need this credit to return completely to start again for the sake of a 'unique' CHECKBOX. ' They ' (tech chat etc.) says that a power supply could be easily "cross-shipped. I hope that this is the case.  I have not really met someone at Dell that could actually change or fix anything, except the person who says they were my person point (and 100% ensure that my machine is a not ship without Energy Star compliance...)   Well...  Maybe the Tech Department are all the RockStars and everything will be Fine. Other than the relatively small omission of a disk, cables and energy star, OMG Wow its GREAT. The best research machine EVER! NOW, I just have to hope is not not a MANNEQUIN PROC PORT and 8 additional dummy DDR4 ports!  LOLOL (they don't put much more metal on a false port!)  I'm so tempted to look under the hood of protection proc to see if there is a badge or million.  (Maybe when I do a video Unboxing 3D tonight later, I'll do it!) OH Yes, I'll do a video UNBOXING to prove that it is amazing how and to help people in a situation like mine (for love or money) is not found on a SINGLE FACT REAL on this MEGA-MACHINE before, during or after the command!  All my * life I have always corrected and help tech departments and not once I don't call any Department tech, I was helped before so I can understand the problem myself and teach THEM the fix (no not that none of them ever ready attention or he wrote LOL) BUT I have NO experience with DELL technicians so far (as I just got my Service Code on my machine)?) so I quite keep out hope and suspend judgment (of course).  Maybe they are the very cool tech guys who are proud to be uber-nerds (like me!) and technicians and in love with their line of the professional tools like today already Fine am!  WHAT A MACHINE! Thanks to those who have tried to help. its perfection!  maritime transport (it is out of LAND anyway?)   I was so counting on him to come next year and I would have the time to make sure that they solve these problems, I've had with the selection of what I wanted in this control system crazy automated online that indicates what you can and can't buy (?)  and then the lack of assistance order placed on the 'tech' cat, which wasn't all that too...  Saying: I wasn't buying a computer at home (her sitting on my BED right away in its box) and they can not help me even if the offer 'click for instant help' dialogue popped up ON the order of T7910 page to halfway through ordering process. Any all this good things.   I can say that it is the best machine I've ever seen.  Surely, they want to go to the final. 01% more in order to make what I have planned and called for!

  Hi Robert3d,

  I am pleased to hear that the system has so far been to the height to your expectations.

  Good luck with the new PC!

• Successful exit

  Hello
  
  I have created a sales order got this booled and ran the liberation of levy. Successfully completes the list of generation of selection list, but in the maritime transport operation form says next does not apply.
  
  
  Not audited
  (1) checkeced the condition of the components and assets
  (2) periods are open
  (3) the inventory subinventory has balance
  
  
  Any guestimates... I have only checked well metalink but abosultely no info to go further... Has anyone in front of this before?
  Concerning
  Vinay

  See if the next note is a help.
  Unprocessed transactions shipping Diagnostic Techniques [262979.1 ID]

  Sandeep Gandhi

• Integration of custom

  Hello

  I am still deciding to convert in British Colombia or not, and this is my major stumbling block.

  I want set shipping options to set correctly the shipment prices depend on postal code UK is entered and the weight of the product. (but not using built-in such as UPS companies presets)

  It took instructions BC:

  The following steps describe the order process, the customer must take when using the built-in navigation:

  • When your customer adds product to cart and goes to the basket, the system will look at the product and display options shipping that apply to this product.
  • * Your customer will be, and then select the delivery option and if the system that the delivery option is an integrated delivery option will be to render the postal code field / postal code.
  • Your customer then enters the zip code of destination and the system will then contact the provider of maritime transport and extract the shipping options available for this destination. ** The delivery option is displayed as a radio button and the customer must select the radio button to apply shipping charges to the order. Note that if the transport provider supports the option of all Services, such as FedEx, we retrieve all options for this destination and customer can then select the appropriate radio button.
  • Customer can then check and complete the purchase.

  Issues related to the:

  1) * is not possible to make this zip in shipping field is "user-defined" and not only when a shipping company integreated is chosen?

  2) * can we not link to a custom external file which would return the price according to the entered postcode (I have already a php page based on a previous Web site that returns Zone1, Zone or area 3 - this combined with the shipping weight is equal to the shipping price).

  (3) BC is planning on integration with Royal Mail (UK postal service)?

  (4) am I stupid? Is there an obvious way to use the existing settings?

  Any help or advice would be greatly appreciated. (Or bite me more than I can chew?)

  It is possible to make your own integrations using jsonp and an external service.

  I made one on ladders4u.com.au for another partner.

  It is not easy, but it is possible. We are currently using our software SimplaCRM to help this cause, it uses the API.

  It does not work for galleries of big product cause the API is broken for products and catalogues when you have bigger catalogs of products (more than 200 products)

• Shipping options

  We intend to launch a donation site and I was wondering if the void shipping options are possible.  For example, we have two shipping options I) next ii) the same day. When the customer selects the 'same day' option, we want to show a list of postal code, where we can delivery and selection takes place zip code, we show the shipping cost?

  Thank you very much

  Hello

  At the moment we have no plans for the integration of all new service of maritime transport in British Colombia. New plans in this direction may appear the end of next year or even later.

  Thank you.

• I want to make a checkbox control that duplicates the data

  You know these forms online, you click "mark as shipped" and when you do, it copies the data from the shipping info to the billing fields... I want to do... is this a custom script?

  Fields of shipping

  "stname' (name)

  "stadd" (address)

  "stcsz" (city province postal code)

  CheckBox name = "even".

  Fields of billing

  'stname1 '.

  'stadd1 '.

  'stcsz1 '.

  Yes, you will need to use JavaScript. For example, in the event MouseUp the checkbox you can use:

  (function () {}

  If (event.target.value! == 'Off') {}

  getField("stname1").value = getField("stname").valueAsString;

  getField("stadd1").value = getField("stadd").valueAsString;

  getField("stcsz1").value = getField("stcsz").valueAsString;

  }

  })();

  This will copy the values in the field of shipping to the fields of billing, but if there is a change in all areas of maritime transport, the values not automatically updated.

• REDO LOG STOP TRANSPORT MARITIMES TO THE BACKUP SITE

  Hi guru,.

  After physical creation Eve redologs are shipped and applied to standby mode. But suddenly stopped shipping redo log. I checked the main site from the log file it log archiving generates here but that is not delivered to the backup site. As I checked the pwd file is same on both sites, so I am able to connect to the db of the main site backup site.

  Can any of clarify you why it happens so.

  Thanks in advance

  From point 1 to 3, I check that all are defined

  But for pt 4 when I run the above command is as below:

  STATE ERROR

  -------------------               ---------------------------------------------------------------------

  VALID

  DISABLED ORA - 16057:DGID OF THE SERVER NOT IN THE CONFIG OF DATA HOLD

  OK, I got the error where is is LOG_ARCHIVE_CONFIG check box enabled on db primary

  I correct and now delivery is correct, but one thing which still confuse me, is that when I run the command to check the archiev applied

  SEQUENCE # FIRST_TIME NEXT_TIME APP

  APP COLUMN ALWAYS SHOWS NO standby, as well as on the primary, but before it shows why Yes

• Computer Windows XP cannot share the public folder or access, it is own to share files through the working group.

  Every time error message:

  \\BOX A\ShareDoc is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.  Not enough server storage is available to process this command.

  I went through the forum after forum and I can not always win.

  I tried
  

  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa restrictanonymous.  The value data is 0.
  • -> Panel-> network connections-> area connection-> properties-> Advanced-> Windows Firewall settings
  • Panel->-> LAN-> properties-> Internet Protocol (TCP/IP)-> Advanced-> WINS-> enable NetBios over TCP/IP, network connections
  • Network connections-> Wireless connetion-> properties-> install-> protocal-> add-> microsoft tcp/ipversion6 and then add Protocol->-> NWLink IPX/S/NetBIOS compatible transport protocol
  • -> Panel-> administrative tools-> local security settings denied access to the computer from the network = remove all users
  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 18

  We'll call the problem BOX computer and the computer in the network of ZONE B.

  Computer configuration:
  All firewall disabled, Windows and McAfee on all computers on the network.
  All VIRUS Protection disabled on all PCs
  BOX A sharing the shared Docs
  Sharing Docs user = everyone
  Everyone has a FULL ACCESS.
  NetBios is enabled.

  Configuration of the Working Group:
  Workgroup = AREA A = ZONE B = MSHOME
  I can successfully Ping BOX A go BOX B and vice versa.

  Measures to control the error:
  I have Open View Workgroup Computers and BOX A and BOX B see each other and to themselves.
  The BOX can access files of the shared BOX B.
  BOX B cannot access the shared files A BOX.
  BOX B can access its own files shared over the network.
  BOX A cannot NOT ACCESS its own files shared over the network.

  I try next? Why can't display BOX A there own shared via the network, the documents?

  I'm still not win... any suggestions?

  Thanks for the tips. I found the problem.

  • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 21

  I had to climb higher I guess. This fixes the problem described above, but now he has opened a new WIndows 7 PC interfacing program with the Windows XP working group.

  I have more reading to do.

• M175nw three groups of dots of color in all pages

  Hi today I installed a new HP LaserJet M175nw, all was fine until shows a user a line of four points in black, cyan, magenta and yellow a color after the other. the line is vertical. This group of points appears three times on the page.

  I had al of the suggestions in the support of hp. Is your help please or I need to transport the printer the seller.

  http://support.HP.com/us-en/document/c02623210

  Thank you

  Hello jquinteros,

  Welcome to the HP Forums!

  I understand that you receive a print quality problem with your Laserjet M175nw. I will do my best to help you! This phenomenon occurs when you print a document in a particular program on your computer?

  In the "Print quality" document you provided, how the "diagnostic" Page to print? You receive all the missing colors?

  I would make sure that the printer is connected to a live wall, not a surge protector. Additionally, make sure that you have updated the firmware on your printer. If you are not sure, please click on here. Please choose your appropriate operating system.

  Impatience on your part have a beautiful day!

• L2TP - impossible to find a group valid tunnel

  Hello

  I'm sure this is a simple solution, but I don't see what I'm missing.

  Any help please?

  Get the following errors in debugging.

  [IKEv1]: invalid tunnel, leaving group = 95.83.254.91, IP = 95.x.x.x, impossible to find a group...!
  23 September 14:26:05 [IKEv1]: IP = 95.x.x.x, invalid header, lack of payload SA! (next payload = 4)

  Group of tunnel I want to use is Remote-L2TP

  Attached config.

  ASA Version 8.2 (5)
  !
  ciscoasa hostname
  domain xxxxx.local
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  name 192.168.1.40 description CCTV system CCTV_System
  name x.x.x.x outside outside interface description
  description of the SERVER name server 192.168.1.1
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  switchport access vlan 12
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  192.168.1.222 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address outside 255.255.255.252
  !
  passive FTP mode
  clock timezone GMT/IST 0
  summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  Server name 89.191.34.249
  domain xxxxx.local
  object-group service CCTV tcp
  port-object eq 9010
  object-group service CCTV_NEW tcp - udp
  port-object eq 9091
  object-group service BlackBerry tcp - udp
  port-object eq 3101
  object-group service NSM tcp - udp
  port-object eq 886
  object-group service RDP tcp - udp
  EQ port 3389 object
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 9091
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 886
  outside_access_in list extended access allowed object-group TCPUDP any host outside eq 3101
  outside_access_in list extended access permit tcp any host outside eq https
  outside_access_in list extended access permit tcp any interface outside eq pptp
  outside_access_in list extended access allowed esp any external interface
  outside_access_in list extended access permit udp any interface outside isakmp eq
  outside_access_in list extended access permit udp any interface outside eq 4500
  outside_access_in list extended access permit udp any interface outside eq 1701
  standard access list for distance-VPN-Gp_splitTunnelAcl permit 192.168.1.0 255.255.255.0
  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.25.0 255.255.255.192
  RemoteVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  VPN-GP_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0
  standard L2TP_splitTunnelAcl-Remote Access-list allowed 192.168.1.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  mask of local pool Remote-DHCP-POOL 192.168.25.10 - 192.168.25.50 IP 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  public static 9091 9091 CCTV_System netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static 886 886 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static 3101 3101 SERVER netmask 255.255.255.255 interface tcp (indoor, outdoor)
  public static tcp (indoor, outdoor) interface https SERVER https netmask 255.255.255.255
  public static tcp (indoor, outdoor) pptp pptp netmask 255.255.255.255 SERVER interface
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 89.191.53.17 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication http LOCAL console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac trans
  Crypto ipsec transform-set trans transport mode
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  Crypto-map Dynamics dyno 20 transform-set trans
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  card crypto 20-isakmp ipsec vpn Dynamics dyno
  vpn outside crypto map interface
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = ciscoasa
  Configure CRL
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  string encryption ca ASDM_TrustPoint0 certificates
  certificate 5eb57b56
  3082016a 30820201 a0030201 0202045e b57b5630 0d06092a 864886f7 0d 010105
  3111300f 05003045 06035504 03130863 6973636f 61736131 30302e06 092 has 8648
  09021621 63697363 6f617361 2e627574 6 c 657274 6563686e 6f6c6f67 86f70d01
  6965732e 6c6f6361 6c301e17 313630 39313931 33303732 395a170d 32363039 0d
  a 31373133 30373239 5 304531 11300f06 03550403 13086369 73636f61 73613130
  2a 864886 f70d0109 6973636f 02162163 6173612e 6275746c 65727465 302e0609
  63686e6f 6c6f6769 65732e6c 6f63616c 30819f30 0d06092a 864886f7 0d 010101
  8 D 003081 89028181 05000381 008e76a6 2ad8e079 15814471 df2c3309 abdc0ae7
  1c665f5f bb09154b 1ac3fd81 930b29cb 6da29338 738c 9373 a0b30f61 a1d08aa9
  f5ef926b 11ef1e22 e8beeb5f c6606090 7a71b367 cad571c5 56331678 d83d4bb4
  9f98a565 577cccd6 dc20e190 c7128cf2 e38d3ad1 37807440 3da501c2 14bbbe02
  45abf677 89248633 d 05589d 4886f70d 01010505 55 75020301 0001300 06092a 86
  000a7b9d 00038181 3e29b1d9 8459309b 5e24606a cae0710e b9e264f4 a61125b9
  2f431f3a 5c4a9485 fe9bc0b0 9f9f7072 13abd978 243e0542 e34642d6 ae33028d
  be03b9e9 56c693ab b082932d b44ab014 9366c0d4 529a7ff5 818f7293 2026521b
  52fcf5c7 d623f7fa 54019c 86 e64a4212 08444c 58 8ccd11d8 4297d18a c4b2de33
  2003eaf5 e2
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 192.168.1.0 255.255.255.0 inside
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 30
  SSH version 2
  Console timeout 0
  dhcpd outside auto_config
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  NTP 79.125.112.210 Server
  NTP server 193.1.193.157 prefer external source
  WebVPN
  port 8443
  allow outside
  DTLS port 8443
  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
  SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
  Picture disk0:/sslclient-win-1.1.4.176.pkg 3 SVC
  enable SVC
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  WebVPN
  SVC request enable
  internal RemoteVPN group strategy
  attributes of Group Policy RemoteVPN
  value of server DNS 192.168.1.1 192.168.1.2
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteVPN_splitTunnelAcl
  XXXX.local value by default-field
  internal strategy group at distance-VPN-GP
  remote control-VPN-GP group policy attributes
  value of 192.168.1.1 DNS server
  Protocol-tunnel-VPN IPSec
  XXXXX.local value by default-field
  internal strategy group to distance-L2TP
  L2TP remote group policy attributes
  value of server DNS 192.168.1.1 192.168.1.2
  VPN-tunnel-Protocol webvpn
  username privilege 15 encrypted v5FJjvsPy8PsIOtZ xxxxpassword
  attributes of username xxxx
  VPN-group-policy RemoteVPN
  xxxxx YeC9t79Bj2E5FxxV username encrypted password
  attributes of username xxxxx
  Strategy-Group-VPN Remote - L2TP
  2KXeP2Ggcoa6BTsozucgAA password xxxxx user name is nt encrypted
  remote access of type tunnel-group to distance-VPN-GP
  distance-VPN-GP-global attributes tunnel-group
  Remote control-DHCP-POOL-pool of addresses
  Group Policy - by default-remote control-VPN-GP
  tunnel-group GP-remote control-VPN ipsec-attributes
  pre-shared key *.
  type tunnel-group Remote-L2TP remote access
  attributes global-tunnel-group Remote-L2TP
  Remote control-DHCP-POOL-pool of addresses
  Group Policy - by default-remote-L2TP
  tunnel-group Remote-L2TP ipsec-attributes
  pre-shared key *.
  tunnel-group Remote-L2TP ppp-attributes
  ms-chap-v2 authentication
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the pptp
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:c4b7c39420a91e2f7bb4adc5e5a8539b
  : end
  ciscoasa (config) #.

  Hello

  I see same Phase 2 is completed in the newspapers, so more than a customer issue.

  On the Security tab in the connection on the client profile, check if you have allowed the correct password and security protocols:

  https://www.SoftEther.org/4-docs/2-HOWTO/9.L2TPIPsec_Setup_Guide_for_Sof...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• IPSEC in Transport mode: what don't understand me?

  Hello world

  Please, consider the following example:

  R1-F1/0(12.12.12.1)---(12.12.12.2) R2 f1/0

  R1 has loopback1: 1.1.1.1, R2 has loopback:2.2.2.2

  Interesting traffic is between 1.1.1.1 and 2.2.2.2. We must use ipsec in transport mode. But for some reason, no matter how many times I typed transport mode under ipsec encryption, traffic get transferred via IPSEC tunnel in tunnel mode.

  R1 config:

  crypto ISAKMP policy 10
  BA aes 256
  preshared authentication
  Group 2
  address key crypto isakmp 12.12.12.1 CISCO

  Crypto ipsec transform-set ESP-AES-192-SHA-384-esp - aes 192 esp-sha-hmac
  transport mode

  ZEE 10 ipsec-isakmp crypto map
  defined by peer 12.12.12.1
  transformation-ESP-AES-192-SHA-384 game
  match address ZEE

  interface FastEthernet1/0
  IP 12.12.12.2 255.255.255.0
  automatic duplex
  automatic speed
  card crypto ZEE

  Route IP 1.1.1.1 255.255.255.255 12.12.12.1

  ZEE extended IP access list
  permit ip host 2.2.2.2 1.1.1.1

  R2 config

  crypto ISAKMP policy 10
  BA aes 256
  preshared authentication
  Group 2
  address key crypto isakmp 12.12.12.1 CISCO
  !
  !
  Crypto ipsec transform-set ESP-AES-192-SHA-384-esp - aes 192 esp-sha-hmac
  transport mode

  ZEE 10 ipsec-isakmp crypto map
  defined by peer 12.12.12.1
  transformation-ESP-AES-192-SHA-384 game
  match address ZEE

  interface FastEthernet1/0
  IP 12.12.12.2 255.255.255.0
  automatic duplex
  automatic speed
  card crypto ZEE

  Route IP 1.1.1.1 255.255.255.255 12.12.12.1

  ZEE extended IP access list
  permit ip host 2.2.2.2 1.1.1.1

  #########################

  Then I delete the SA on R1/R2:

  R2 #clear crypto isa
  R2 #clear isakmp crypto
  R2 #show crypto isakmp his
  status of DST CBC State conn-id slot
  12.12.12.1 12.12.12.2 MM_NO_STATE 1 0 ACTIVE (deleted)

  R2 #show crypto ipsec his

  Interface: FastEthernet1/0
  Tag crypto map: ZEE, local addr 12.12.12.2

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (2.2.2.2/255.255.255.255/0/0)
  Remote ident (addr, mask, prot, port): (1.1.1.1/255.255.255.255/0/0)
  current_peer 12.12.12.1 port 500

  Truncated!

  local crypto endpt. : 12.12.12.2, remote Start crypto. : 12.12.12.1
  Path mtu 1500, mtu 1500 ip, ip mtu IDB FastEthernet1/0
  current outbound SPI: 0x0 (0)

  SAS of the esp on arrival:

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  outgoing ah sas:

  outgoing CFP sas:

  R1 #show crypto isakmp his
  status of DST CBC State conn-id slot

  R1 ipsec crypto #show her

  Interface: FastEthernet1/0
  Tag crypto map: ZEE, local addr 12.12.12.1

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (1.1.1.1/255.255.255.255/0/0)
  Remote ident (addr, mask, prot, port): (2.2.2.2/255.255.255.255/0/0)
  current_peer 12.12.12.2 port 500

  Truncated!

  local crypto endpt. : 12.12.12.1, remote Start crypto. : 12.12.12.2
  Path mtu 1500, mtu 1500 ip, ip mtu IDB FastEthernet1/0
  current outbound SPI: 0x0 (0)

  SAS of the esp on arrival:

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:

  outgoing ah sas:

  outgoing CFP sas:

  ###############

  Then, I have ping to 1.1.1. source 2.2.2.2 on R2:

  capture23.PNG

  

  Above, we see the traffic between 1.1.1.1/2.2.2.2 is sent in tunnel mode, even though I configured IPSEC transport mode.

  It seems that it does not matter if we have configured ipsec for the mode of transport or not, when using the crypto traffic map is transmitted using tunnel mode.

  Thoughts?

  Thank you

  You cannot use the mode of transport in this situation. You need two-heads IP here: one for end tp (1.1.1.1 to 2.2.2.2) communication and one for transport of IPsec (12.12.12.1 to 12.12.12.2). This is the reason that your router automatically in tunnel mode.