Mark this shortened Page keyboard no longer works

Similar Questions

• Satellite T130-16w shortened wireless keyboard no longer works

  Any advice would be much appreciated.

  Toshiba Satellite T130-16w Windows 7

  Several months ago, I deleted some of the bloatware factory on my laptop because of the downturn. I checked that all was not necessary before deleting, I think I might have made a mistake. Since then, I have used mobile internet. Today I came to turn on the wireless function + F8 key does is nothing more. The small menu without wireless/bluetooth does not appear. Without wire is currently disabled and I can't get it there.

  Wireless is enabled in the BIOS. In Device Manager, it appears under the name of work and active. The computer is by all means put in place to use it, I can't get the key to do something, so I can't activate it. Oddly, I turn bluetooth on and off separately, but not wireless.

  I updated the driver for the wireless, but the driver of the shortcut key is not anywhere on the site. I tried searching it elsewhere but he couldn't find for windows 7. Can I use the XP one, or the one of a different model of Toshiba? The T130 section just not return results.

  It sounds like the shortcut key is the question? Does anyone know where I could find the driver? Is it possible to turn on the wireless without using the function key (there is no switch)? As through windows? I have been trying to unravel for 4 hours and got nowhere.

  Thanks for reading.

  Post edited by: wl86

  Hello

  Win 7 requires Toshiba VAP (value added) installation for FN keys work.
  Visit the page of the Toshiba UE driver and you can find the VAP for Win 7 64 bit

  If you need the PPV for Win 7 32 bit, choose another series of the laptop and use the VAP released an another laptop.
  The VAP is not in the laptop series.

• Pad at the top of the keyboard no longer works after installing Windows 7

  I have a cl dv7-1273.  Just changed from Vista Home Premium 64 for Windows 7 64.   Win 7 installed OK.  After you install the pad at the top of the keyboard no longer works in the dialogs like this.  When I entered the numbers here I had to use the keypad.  Keys still work in Word, Excel, Evernote, etc..

  Someone on the forum had the same problem of pad during the upgrade to win 8.  They solved the problem by uninstalling Comcast constant guard.   I removed a constant guard and now my keypad work.  Is there something in constant guard that is in conflict with the keys from HP laptop during upgrade to Win 7 or 8 Win.

• BlackBerry Smartphones shortcut keyboard no longer works

  I've updated my OS to V4.5.0, and now my voice mail shortcut keyboard no longer works. I have now the message "assign a speed dial key w." can anyone confirm this shortcut no longer exists or if it has been replaced by something else.

  Sometimes, I saw a simple reboot of the device to correct this.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  If still not, and then assign your voicemail at this speed dial button.

• MacBookPro keyboard no longer works on VMware Fusion:

  Hello:

  I don't know where the problem lies - be it with VMware Fusion, Microsoft XP Pro or MacBookPro material.

  But I initially installed those and had no problems. But now the laptop keyboard no longer works since the

  Storefront Windows XP (it works fine on Mac OS (Leopard 10.5 X))

  Please don't tell me I have to get a Windows USB keyboard.

  Maybe I need to install a driver? However, XP doesn't have the driver.

  Thanks in advance:

  Michael Yanowitz

  VMware tools are installed...

  Concerning

  Anil

  Save the planet, go for green

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

  http://www.LinkedIn.com/pub/5/987/995

  http://Sky-v.blogspot.com/

• JETech 2010 keyboard no longer works correctly!

  Keyboard no longer works. At least remove them and T keys do nothing. I have blue tooth, forgotten unit redefined and networks... Any other ideas please? Thanks in advance X

  Try the keyboard on another Mac or PC. If it still fails, you know the keyboard is broken. You can also try the keyboard when it is started in recovery as a basic test mode. That will tell you if the keyboard works well when a single copy of the operating system is running without all your installed applications.

  OS X: on OS X Recovery - Apple Support

  Select the option to browse the web to try the keyboard in Safari in recovery mode.

  If the device is 2010, you should seek to buy a new device, otherwise if it is new & still in warranty, return it to the store or the manufacturer.

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• Some keys of laptop on wireless 1027 keyboard no longer works

  I have connected the keyboard 1027 wireless to my laptop.  Now I can't uninstall it. The problem is that my laptop keyboard types is no longer the correct characters, even when the wireless keyboard is disconnected.  How to remove the keyboard or get my laptop keyboard keys are working properly?

  Hi wnks2010,

  In addition, it could be a problem with the keyboard driver.  See the article following some information/troubleshooting for your question:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sculpt Microsoft comfort keyboard no longer works correctly

  Several times a day my keyboard no longer meets all the keystrokes or sometimes double on strikes. I can type a sentence and find only the occasional shows on the screen or more characters I typed (e.g. "character" indicates "cacter" or "ccchaaraccterr"). At first, I thought it was the batteries in the keyboard, but have lost a few sets of batteries, I found that out the receiver to the USB port and plug it into another port works for maybe an hour or two, and then it happens again.  Putting the receiver into the original USB port solved the problem again. Removal of the receiver and put it back in the same port do not solve the problem.  Any ideas gratefully received.

  Hello

  Thanks for posting in the Microsoft Community.

  Rest assured that we would do our best to help you.

  This problem can result from a software conflict drivers obsolete or third parties with the drivers.

  I suggest that you try the following and check if this solves the problem.

  Method 1: Safe Mode

  I suggest you to start the computer in safe mode. If the keyboard works fine in safe mode, and then try to start the computer in a clean boot.

  See the link to start in safe mode:

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Method 2: Clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 3: Run devices and devices Troubleshooter

  Follow these steps to run the hardware and devices Troubleshooter:

  1. Press the Windows key + W and type Troubleshooting.
  2. Select Troubleshooting.
  3. Select show all in the upper left corner.
  4. Click hardware and devices.
  5. Follow the on-screen instructions for running the troubleshooter.

  Also install the latest windows update. See the Microsoft Help article below for installing the Windows updates:

  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this will solve the problem, if not let us know with the updated status and we will be happy to help you further.

• Is this Message that Firefox no longer works on my authentic MacBook?

  This message received this week also Firefox icon has disappeared from the dock.

  Yes, it's a true information - there will be updates of firefox on mac osx 10.5 in the future
  Firefox no longer works under Mac OS X 10.5

• Wireless keyboard no longer works with Bootcamp that run under El Capitan

  I have an iMac 21.5 mid-2011 "2.7 Ghz, 12 GB with a Bootcamp with Windows 8 partition is installed.

  Everything that used to work very well.

  End of September / beginning of October, I installed El Capitan, but never checked Bootcamp as only a few client projects require me to switch platforms.

  A recurring job that needs to be updated with Windows apps landed on my desk today.

  So I started Bootcamp/Wiindows and everything seemed normal.

  My Apple Wireless Mouse mouse works but found, when I got to the Windows account login screen, that my Apple Wireless keyboard does not work with Windows more.

  I have read several threads on this discussion forum and tried the suggestions made by different people: the VMRAM reset, turn off the iMac and unplug the power supply, the keyboard in Mac OS X Bluetooth pairing. But no joy.

  Several responses seem to indicate that there is a software which can be downloaded in Windows that allow the keyboard is working again.

  However I can't sent the newspaper on the screen to reach the Windows desktop, because I need to enter my password or security number using my wireless keyboard.

  If I seem to be stuck between the hammer and the anvil :-(

  Are there bright and sensible ideas I can try to fix this?

  You have a wired keyboard and mouse that can be connected to the iMac?

• Since upgrading to 9.2 this morning, Touch ID no longer works. I reset everything and now cannot even enter with fingerprints. It's all clean, but nothing happens. Grrrrr... Ideas?

  Touch is no longer works after upgrade to 9.2 this morning. I reset all the settings and can not get readmitted prints. Ideas? THX

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Keyboard no longer works

  I have a Mac Mini with OSX 10.11.1 2011 environment. I use an IOGear KVM with an aluminum full USB Apple keyboard. When I upgraded to El Capitan I had to manually set the keyboard type to a 101-102 keyboard because when I hit the button to the right of the left SHIFT key it showed that it was unknown to the keyboard. It worked fine for a month. I had been running Parallels v10 with Windows 8. I installed the version of Windows to Windows 10. Now for some strange reason the number keys in the numeric keypad do not work. Press 'clear', 'is', ' * ', -', and '+' more to do. " Initially, I thought that maybe they are translated into cursor keys, but after trying to use them as cursor keys in a spreadsheet, I found that this is not the case.  I read somewhere that the NUMLOCK combination on some keyboards is shift + delete I tried but it does not solve the problem. I have to use the KVM because my job requires me to run tests on Windows systems. A complementary, all on the keyboard note worked except the keystrokes to start. If I need to start and use a startup sequence I need to plug the keyboard directly on the Mini. And Yes, I tried to plug the keyboard directly into the Mini and the keys still don't work. ARGH!

  any help would be appreciated,

  John

  Well, I found the keyboard moves the cursor. I also found that the option + F5 command can change back to numbers.

  I just had to do a little more research.

  Thank you

• Mouse and keyboard no longer works in Windows XP Media Center edition

  I moved my Gigabyte Media Center and start the keyboard and mouse are are suddenly stopped working. Works very well to access the BIOS key and F8 for safe mode - has also no feature mouse keybpard or. So with any form of Windows I have no input control. It is not a problem with the keyboard because it works in start mode. Tried other mouse USB and keyboards all to nothing does not. There are no PS2 port on the machine. I found a few examples of this anomaly on the web, but no real answers. It looks like windows for mouse and keyboard drivers are corrupt? But how can I get reinstall - machine is defunct Evesham, I don't have a recovery disk or a serial number. Any help would be accepted with gratitude!

  Hi Keith,

  Thank you for your response and keep us updated.

  I suggest you run the fix from the link next and if it helps.

  USB devices stop working in Windows XP Media Center Edition

  http://support.Microsoft.com/kb/890546

  If the problem persists, feel free to let us know. We will be happy to help you.

• wireless keyboard no longer works when I changed the batteries

  my keyboard microsoft keyboard elite 1002 says she is low on battery.  I changed the batteries.  The keyboard was not working so I searched on bluetooth, did not find it and re - he added.  I let him choose the password.  I typed on the keyboard and press enter on the keyboard.  The unit now looks like being there.  But it does not work.  I tried to do these steps (remove and add the keyboard) 3 times.  What could be wrong?  The power of the battery shows as "good" when I checked in the properties of the keyboard.

  Hi ckcinc,

  You can follow this link & check if it helps.

  Resolve the failure of mouse or a Bluetooth keyboard to function

  You can also contact the Microsoft Hardware support for assistance.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.