Market not SD reader does on Satellite M30

Similar Questions

• DVD - RAM drive does not appear in my computer (Satellite M30)

  Hello
  I have a rug * a DVD-RAM UJ 820 in a Satellite M30
  It seems that the driver does not work and the DVD unit is not showing in my computer - the device however seems to work - I was told a solution may be to download the driver and re-install again. Any idea where I can get that? You have any other suggestions on how to fix this?

  Thank you

  Hello

  drivers are located on the download site for the driver from Toshiba:
  https://EU.computers.Toshiba-Europe.com
  under Support & downloads, download drivers

  If this does not help, look around this forum. I saw some other threads on this DVD player.

  Good bye

• Can not find the drivers for Satellite M30 842

  Hello

  I'm a repair technician, and I'm repairing a European model Satellite with Windows corrupted; I reformatted and I install Windows with my generic Windows XP Home CD. I have had no luck finding the drivers for (as listed in the Device Manager):

  -Network controller (wireless, wired ethernet works)
  -Controller Audio multimedia
  -Modem PCI
  -Unknown device

  Windows Update has been able to find the video and the USB drivers, but I can't find information on this model on the Toshiba support sites.

  Thanks in advance,
  Tim Allix
  Whistler, British Colombia. Canada.

  I put t know where is the problem?
  Satellite M30-842 contains the number PSM30E.
  Visit the page of the Toshiba driver and select just this laptop

  You also, you should find on the same page Check installation instructions and follow the guide of the lines in the text file

• Satellite M30-841 - large hard drive not recognized

  HY guys,.

  First of all, I want to say hello, because this is my first post in this forum. Merry Christmas as well!

  I am writing because I bought a 160 GB 2hard disk to replace my old 60 GB. When I troed to install it, I saw that it recognizes just 128 GB which, according to my research, is due to the LBA 48 bit not supported on my laptop (Satellite M30-841).

  I tried to everythingmentioned:
  -J' have flash Bios o update the 1.70 (last available driver toshiba Web site)
  -J' changed the downloaded XP SP3 and I changed the registry to install a key DWORD EnableBigLba.

  However, she still recognizes only 128 GB. I'm losing hope to install the new hard drive. Anyone of you has a suggestion that I should try?

  I realized that I should update the driver of my motherboard, but I don't know where they are, if there is (I don't even know the name of it, despite the use of everest - which shows DMI.

  Am I missing something?

  Thank you very much

  Icemaster

  Look, man.
  The HARD disk controller seems to support the 28-bit LBA.
  The disk controllers HARD supporting the 28-bit LBA address max 128 GB HDD.
  Controllers HDD support 48-bit LBA address bigger hard drives.
  But this is a physical limitation and you will not resolve this update anything.

  In your case, there is nothing to see

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite M30-604 does not start after upgrading RAM

  I have exactly the same problem with a Satellite M30 604! I have 2x1GB sticks and screen stays black. It works if I use one of the 1 GB sticks and one the old 256 KB stick but not the 2x1GB sticks as it should be (according to the specifications of my model manual).

  Boths glue work perfectly, I tried to the sepparately.

  In addition, computer does not work with the single 1x1Gb stick, mandatory I have to combine a new (1 GB) with an old (256Kb), or just stay on the two old sticks...

  What can I do? PLEASE, I BEG YOU!

  Hello

  Satellite M30 can be upgraded up to 2 GB of RAM, but you must use compatible RAM modules.
  As far as I know, you can use the modules of PC2700 and PC - 2100 DDR SODIMM 200 pin.

  I think that you problem is certainly linked to a not entirely compatible RAM modules

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Satellite M30: Does not start XP

  My Tosh Satellite M30 laptop (with 2 HD discs) does not work after I have updated with the MS security updates, it does not start XP.

  The laptop makes a clicking sound and gives me the message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  Operating system not found.

  I changed the boot order in the BIOS to: CDROM. And select Exit and save changes.
  Inserted my Toshiba Recovery windows XP version that allows me the option of
  "1. the recovery disc" or "2. Expert recovery mode"or also"Exit ".
  I chose "1. Recovery disc"as I'm not an expert (as you can tell!)

  I then get a load of diagnostic checks run by laptop and it shows then finally on the screen:
  X:\\ no disk fixed

  Ideally, I would like to repair and keep things I have on my drive D: HD.

  I'm pretty sure the XP starts on my drive C: HD.

  Your help is very appreciated!

  Suraj

  Hello

  The PXE message means that the device is trying to boot from the network. I put t understand you a lot with C and D HD. I assume you mean that you have two partitions on a single HARD disk. C partition for the operating system and the D partition for your data.

  If I understood you as soon as you cannot boot operating system at all. On this path, it is not easy to say what may be the problem but obviously you a problem with the HARD drive. It is probably defective. If the recovery DVDs is not able to detect one that there may be a serious problem.

  I put t know how contact the partner old Service your unit is but if the warranty is still valid and let check the device.

  Good luck!

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Satellite M30: Mat * a UJ - 820 s read DVD but not CD

  I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

  I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
  I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

  I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

  Any help please!

  Hello

  tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

  http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

  So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

  Welcome them

• Satellite M30, Intel pro WLAN 2100 3B mini PCI adapt does not

  Hello
  I bought a satellite M30 a week ago. I used the wirless lan a few times. Now I rebooted the computer after that the wireless network adapter no longer works. In the properties of the device, there is error code 10: impossible to activate the device.
  I tried to uninstall the device and installing again, but it did not work.
  Do you have any suggestions?
  Thanks in advance

  Alberto

  Hi, congratulations on your Satellite M30!

  Cold machine. Well I'd keep it very simple. Redefine your laptop to factory settings (Simple recover using the CD or the DVD delivered).

  If the won´t still card Wifi works, there will be a material damage on your laptop.

  Please let the dealer take a look on your machine.

  Good bye

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• Satellite M60 - 104 - memory card reader does not read the MemoryStick pro duo

  Hi guys,.

  built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?
  I know it must read MemoryStick pro, but not sure about pro duo.

  Can you help me please?

  Hello

  > the built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?

  Of course, this could be a normal behavior as not all cards are compatible and taken in charge.
  I would recommend look in the user manual because you can find there information cards can be used in the portable card reader!

• Satellite M30 does not show the connection of the battery after 5 min of use

  Hello

  My Satellite M30 recognize the battery when placed first in and for 5-10 minutes.
  After that the power meter shows I'm on sector without battery. Any advice?

  Anyone know if it is an issue that could be fixed with a new battery, or if it might have something to do with the connection between the battery and the laptop?

  Thank you very much
  g

  Hello

  If the AC adapter is plugged into the laptop that Toshiba Power saver should show a connected adapter. In this case the laptop must not run on battery!
  If you you unplug the adapter icon which appears in the taskbar should move from adapter to battery.

  One question; How old is your battery?
  Usually after several times the battery loses performance and it possible s you will be able to use the battery only for a few minutes. After this period, the battery is empty and needs to be recharged.

  Maybe your battery performance isn't the best right now and it should be replaced. ?:|
  This should be checked permanently.

  Good bye

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?