Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

Hi Rahmansherif,

·         Did you do changes on the computer before the show?

Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

(a) click Start, run.

(b) type msconfigand click OK.

(c) the System Configuration Utility dialog box appears.

(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

(e) when you are prompted, click restart to restart the computer.

Tags: Windows

Similar Questions

  • I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

    original tittle:msetg.161

    I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

    Hello Salim'sMailbox,.

    ·         When exactly do you receive the error message?

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 2: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Response with more information to help you further.

  • Half-life 2 says failed to load the Launcher DLL specified module could not be found

    Failed to load the Launcher DLL:

    the specified module could not be found

    Hi Madoo17,

    Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

    1. Once you get this error message?

    2. it worked before?

    3 did you changes to the computer before the show?

    Perform the steps:

    Method 1:

    Put the computer in a State of boot is a way to know which application is causing this problem.

    To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Step 1:

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    Follow the steps in the link below to do the same thing:

    How to configure Windows XP to start in a "clean boot" State

    Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

    Step 2: To configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    a. Click Start and then click Run.

    b. type msconfig and click OK. The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

    d. When you are prompted, click on restart to restart the computer.

    Method 2: Use the (SFC) System File Checker tool.

    SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

    Check out this link to do the same thing:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    Hope this information helps. Please reply back with the State so that we can help you.

  • LoadLibrary failed with error 126 that the specified module could not be found

    Hello, I receive this error randomly when am using oracle sql developer, sometimes, it happens just after the start and sometimes after 5 minutes.

    the error closes the program

    Help, please

    Looking for "loadlibrary failed with the 126 java error" seems to indicate problems with OpenGL and some video drivers and/or environments with multiple monitors. Here are several discussions...

    https://NetBeans.org/bugzilla/show_bug.cgi?id=243153

    Error "LoadLibrary failed with error 126: the module could not - Microsoft Community.

    [SOLVED] Problem with Launcher Technic: load library failed with error 126 - Technic Launcher - Technic Forums

    Therefore, it seems that this issue is not specific to SQL Developer. The last discussion includes a video link in his last message saying that ".dll" is sought instead of "atioglxx.dll' on 32 - bit or systems 'atio6axx.dll' on 64 bit (in the C:\Windows\system32 folder) system, so a workaround is to copy one of those to".dll ".

  • Error message when starting. C:\WINDOWS\system32\gijsgkuj.DLL specified module could not be found.

    This error message has appeared for some time now, but it does not seem to harm my pc, other than very slowly.  What is the feature of this module?  Do I need for normal use?

    johnedr1,
    You can check that you spelled the file correctly?  I wasn't able to find that everything about this DLL.  If you have any specialized software it can be part of that.  But something during startup tries to call this file and find do not.
    You can make troubleshooting by performing a clean boot.  Here are the links that will explain the process in detail.  Short of this, you disable the elements of all Microsoft and if the error Stops, then add points back until you find the program\process which is the cause.

    Follow the steps in this article to resolve problems with a clean boot.

    http://support.Microsoft.com/kb/310353

    Boot advanced troubleshooting: http://support.microsoft.com/kb/316434

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

    The PC boot-to top every morning, I get this message. Can I please ask for some advice on how I can solve this problem, thank you.

    Hello LewBut,

    I'd say go throught he link below and try the suggestions of the SpiritX MS MVP.  How long have you encountered this message when you start your computer?

    Error loading C:\...".dll" the specified module is not found.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-loading-CDLL-the-specified-module-could-not/c21f0647-98EA-4170-9fca-90b5fcc5273a

    In addition,

    DLL of enforcement, error loading

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/run-dll-error-loading/02dbc0c6-fed0-4B7E-97ab-1245e9f43939

    Thank you

    James

  • C:\windows\system32\nvcpl.dll the specified module could not be found at the beginning upward

    Original title: starts: error

    At the start of the get dialog box a big X 32\NvCpl.dLL C:\WINDOWS\System loading error RUNDLL

    The specified module could not be found.

    What this mean and how can it be fixed

    Yahneev

    Hello

    The system was recently infected by malware?

    C:\windows\system32\nvcpl.dll is NVidea graphics driver

    Restart and start typing the F8 key

    Select Mode safe mode with networking

    Download the following tool and run a scan complete to rule out malware

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Open the Device Manager and uninstall the NVidea graphics driver

    Reboot and Windows will reload the driver

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • What is this error? Error loading c:windows\mcycol40.dll the specified module could not be found

    Windows XP is giving the following error message and there is NOTHING to be found anywhere on this subject.  Help

    RUNDLL

    Error loading c:windows\mcycol40.dll

    the specified module could not be found.

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

    Original title: sbdbrbs

    When my computer starts up it gives the following error message: error loading C:\Windows\sbdbrbs.dll - the specified module could not be found.

    Can anyone offer any assistance?  Could not find this particular dll through search engines file.

    Thank you

    Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

    When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

    First of all, download, install, update and run full scans with two of these free analytical tools:

    MalwareBytes AntiMalware
    SUPERAntiSpyware

    Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

    If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

    Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

  • Error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

    When I boot, the following message is displayed: error loading C:WINDOWS\opetafuzacan.dll the specified module could not be found

    Anyone know what it is? I have not noticed a difference in the way the computer runs

    Looks like it is or was part of the malware. Download ccleaner install then run it. Go to tools / startup highlighted / delete

  • MSG for error in Windows 7: "unable to load DLL 'Gpib - 32.dll': the specified module could not be found."

    Hi people, I have a project in VB. NET (VS2010 specifically), which has been updated from an old VB6 project. The old project

    use Niglobal.bas and Vbib - 32.bas to communicate with the GPIB plugged into one of our litters.
    Now in the 64-bit Win7 with the Niglobal.bas and the Vbib - 32.bas converted to Niglobal.vb and Vbib - 32.vb,.

    I get an error when debugging to

    Public void RegisterGPIBGlobals()

    in the Vbib - 32.vb, the error msg says:

    Unable to load DLL 'Gpib - 32.dll': the specified module could not be found. (Exception from HRESULT: 0x8007007E)

    It seems like this Gpib - 32.dll, that I found under SysWOW64 on my Win7 is not designed for a 64-bit application and when I copy this dll file on

    C:\Windows\System32, the msg of error becomes:

    An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)

    So I think my question is double: 1. the drafting of my own app in VB. NET can I still use Gpib - 32.dll (including the Niglobal.vb and Vbib - 32.vb)?

    2 Will the application I am writing with .NET work in x 64 Windows 7?

    The Almighty gurus and Mods please help. Thank you!

    Hi Joel, thanks for the answer! I have the 3.0.2 driver.

    I was looking around for a while after I posted here and further in the use of NI4882 manual, page 4-4, I found this:

    «To bring an application in an environment 64-bit requires the application to migrate the NI4882 API and be recompiled.»

    So I'm ditching the gpib - 32.dll (vbib - 32 & niglobal) and currently I am using NI4882.dll and restructuring of my project.

  • RUNDLL error loading c:\windows\icstlt2.dll the specified module could not be found

    This happens every time I start my computer. I can't do anything with the computer until I click the OK box. Then everything is generally well, but sometimes the computer just hangs. What is this and how do I get rid of him?

    It's just a dll name random belonging to some malware that had removed your antivirus programs or security.

    The error is because the point of loading in the registry is still present and it is trying to load the module that no longer exist where the "load error".

    You can uncheck the corresponding item in msconfig > startup, or if you scan from HijackThis, you can run it and difficulty of the relevant start pointing to icstlt2.dllentry.

    Similar to the example of an entry from Hijackthis below.
    "Rundll error loading c:\windows\ksexyn.dll. The specified module could not be found.

    Fixing the entry in HijackThis stopped at the error.
    O4 - HKCU\... \Run: [Pzemowukatiy] rundll32.exe "C:\WINDOWS\ksexyn.dll",Startup"
    http://free.antivirus.com/HijackThis/

    Let us know if you need more assistance.

  • Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

    RUNDLL error

    The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

    Error loading c: | windows | izameweb.dll the specified module could not be found

    Kind regards

    Anne-Marie

    Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

  • Startup DLL error - error loading C:\Windows\onedidak.dll the specified module could not be found.

    Whenever I start my windows xp, I always got the error

    RUNDLL

    Error loading C:\Windows\onedidak.dll

    The specified module could not be found.

    I google, would be Bing and yahoo looked everywhere for the use of the onedidak.dll and could not find answers.

    Help, please!

    I'd take a peek at this recent activity in this other thread where there is a happy ending, and it makes sense (only the name of the DLL is different).
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/get-error-message-regarding-ccncolmsdll-file/5770d2f6-805e-E011-8dfc-68b599b31bf5

Maybe you are looking for