Mask with shape

Anyone else having problems using this feature since the update? It remains greyed out little matter what I do.

Hi Gregory,

To be able to apply the mask to a shape, you need at least two selected objects: shape to hide and mask.

The simplest use case is to create two shapes that overlap, select the two of them, and 'Hide with the Shape' must be enabled.

The issue reproduces on this simple use case? If this isn't the case, could you describe the steps to reproduce?

Thank you

Mihai

Tags: Adobe XD

Similar Questions

  • How to calculate the mask with joker to ACL

    Dear,

    I know it may seem a question very bacis, but frankly I've searched the net, books & asked many friends and no one could help you.

    I want to create one or two access list to hit the following ip prefix.

    192.168.2.0

    192.168.6.0

    192.168.11.0

    192.168.15.0

    192.168.18.0

    may well want to explain to me in binary computing.

    concerning

    I think your question is asking questions about the means to have a single line in the list ACL correspond to more than one address, so that with one or two lines of ACL you could match to these 5 addresses. The way to start is to understand what these addresses have in common. they all 192.168 in the first two bytes and 0 in the last byte. So the third byte is the place where there is no variation. We must therefore start with the value of the third byte in binary:

    2 is 00000010

    6 is 00000110

    11 is 00001011

    15 is 00001111

    18 is 00010010

    If you examine the binary and see what numbers have many BITS in common that we see that 2 and 6 have in common the 7 of the 8 bits and could be grouped. We see that the 11 and 15 have in common the 7 of the 8 bits and could be combined.

    Then the Group 2 and six that we want a mask which says that bit positions 1, 2, 3, 4, 5, 7 and 8 must match and bit position 6 does not. The mask with 0 to 1, 2, 3, 4, 5, 7 and 8 is 00000100 (4 in decimal). The Group 11 and 15, we also have bits 1, 2, 3, 4, 5, 7 and 8 to match while we would use this mask still 00000100.

    There is not a way to combine 18 very well with the other addresses. So an ACL have 3 statements to match these 5 addresses.

    permit 192.168.2.0 0.0.4.0

    permit 192.168.11.0 0.0.4.0

    Allow 192.168.18.0 0.0.0.0

    HTH

    Rick

  • Create letters with shapes

    Hi, if hundreds of years ago I saw a video with a guy of creating text with shapes. So much as it creates one'm ' using the rectangles and circles. I have recently lost this video and that you do not. I was wondering if someone can show me how do? It sorta looked like this. I use illustrator for about 3 weeks, just try to do that and I can't just.

    Start with circles and lines - don't forget: you can align points so they correspond exactly

    Select these anchor and remove

    Select the tracks that touch and join

    Apply line thick and round caps

    Object > path > offset path and to use agin round caps

    Apply thin line

  • Mask with feathers recording does not correctly

    During a layer containing a standard chart, then by applying a mask and then apply a border said feathered mask - the estimated slope is not saved in my JPEG files.

    The gradient is completely absent and the whole graph is displayed.

    To make the mask with feathers.

    screenshot 2.jpg

    I then save this file to the standard jpeg format.

    When I open the JPEG in Photoshop:

    screenshot 3.jpg

    I find weird when you view the thumbnail in windows Explorer, I can see the gradient:

    screenshot 1.jpg

    If I flatten the image before saving, everything works fine.

    Is happening here?

    10 64-bit Windows

    Recent CC PS

    Standard 8-bit file - no funny stuff (I know)

    Tried to reinstall the Psalm

    Tried to restart.

    This procedure worked fine until today...

    Hello

    Greetings!

    This is an issue that already was reported and recorded as a bug will be fixed with the next update

    Concerning

    Jitendra

  • Effect of cropping - Image bleeding by mask with feathers?

    Hi all

    I am applying a form customized with the cropping effect mask. I've attached a picture showing the issue. The edge of the cropped image is bleeding in the mask as a result of the addition of a feather mask. I encountered this problem in several projects for the past few weeks. Anyone have any suggestions!

    Thank you!

    Screen Shot 2015-11-05 at 22.22.21.png

    Better is not not to use the mask with the cropping effect, but rather of opacity mask.

  • Problem with mask in mask with mode GPU on a HTC m8

    Hi, this could be an old bug, we see a problem with AIR 15 and 16 on only this phone HTC Android (4.2.2) newish special. Our app uses GPU renderMode. The problem occurs if you have a MovieClip that is hidden with children who have children who are also hidden, so only the first hidden child renders. Also, make all other objects that are not hidden but if one of them has a mask, then that has not been made. This problem will not occur on an older One X HTC and HTC Desire 610 running the same version of Android (4.2.2). He can't get on Google Nexus 4 or iOS.

    Thanks for your help!

    Hello

    There is a work around for this problem.  If we set cacheAsBitmap (this.cacheAsBitmap = true ;) property children hidden to true, then all children hidden will make correctly gpu mode.

    Determination of the sample application even with changing respective to solve the problem of Bug #3921039 - problem with mask mask with mode GPU on a HTC m8 . Inviting you to please publish the application with the method mentioned on your device for which this problem occurred.

    Note:

    The following documentation on the gpu rendering mode - http://help.adobe.com/en_US/as3/mobile/WS901d38e593cd1bac-3d719af412b2b394529-8000.html States that: "the GPU rendering is more restrictive in mobile AIR applications built with the packager for iPhone." The GPU is effective only for bitmaps, solid forms and display including the cacheAsBitmap property defined objects. "

    Please let us know in the case where you are still facing problems.

    Kind regards

    Adobe AIR Team

  • Masking with brush problem

    In the mask with white brush it is erased parts with black reappear, but especially the black value is not more black, looking more closely I see 'tiles' background... when I use the Lasso tool on the same area and "delete" having put in black color, black on the image is 'black' once again... is possible to get 'black' with brush too?

    Maybe I searched keywords wrong or don't know what to look for, but I have not found anyone asking about this problem.

    Thank you

    In fact he did not me to do this, I would have only the cursor to grayscale while working with a mask, BUT... as I tried it, I clicked on 'samples' just to see what for and there I found something like graduated colors, including as white with shades of gray, and when I clicked on "whitest whites. It worked just like I wanted, so now I can achieve "true black" when brushing mask back, so thank you for your help, without you I probably would never try this option, please

  • Create a mask with a transparent visor in Captivate?

    Hey everybody,

    I'm sure Captivate based on the readings of the forums, but I thought I'd ask.

    Can I create a mask with a transparent visor in Captivate?  I would like a text box to display in the center of my step just like the animation flash below:

    http://www.crystalgraphics.com/PowerPoint/slide-wheel-diagram-3D-animated-blue-3-process-m p - 115.asp

    If captivate can do, I'll post on the Flash forums to determine the best Flash tutorials to complete these steps.

    BTW - I just thought of a way to layers of "mask" in Captivate.  This isn't really masking, but cut an image into several parts and saw the new image should rule out behind a slice of the existing image.

    1. create a slide with an image.

    2. when the user clicks on a part of the image, direct the user to another slide.  It has the same picture, but it is cut into layers.  The new image move back 1/2 of the picture in front of the other 1/2 of the picture.  It would make it look like he wears a transparent mask, but it's really just browsing a 'slot' in the middle of the image.

    It is difficult to explain without Visual effects.  If I decide to use Captivate in this project, I'll post my work and some screenshots of the process.

  • Motion tween on mask with a black background

    Hi all

    I'm new to Flash with only two simple animations to my name.  I searched for the help documentation from Adobe and the Forums for an answer to my question, but I found nothing.  The closest answer you, I found was referring to CS3, but I didn't know if it was still applicable for CS5.

    I'm trying to set up a simple mask as a test.  I want to have an oval shape as the mask moving around a black background showing white below.  At the end of its tween, it falls on a stick figure.  (It's like the end of the James Bond opening sequence: the bland Cannon gun away from leaving a white circle in the middle of a black background.)  The white circle moves reveal part of the opening scene.)  I tried to create a black fill, on a separate layer, as a backdrop, but that did not work.  (Put the layer of black over the mask just covered the whole mask interpolation, placing just under the mask revealed the black under the mask.)  Of course).

    Anyone know how I can make the hidden part of the black mask instead of white?  Is it still possible?  I know it's annoying when newbies ask simple questions, but it drives me crazy, and I would like to know how to make because it seems so simple.  Can someone help me to stop being a noob?

    create a black shape in your lowest layer.  above this layer, create a while shape which covers you the black shape.  above this layer create your oval and tween there.  Finally, right-click the oval containing the layer and click on the mask.  test.

  • Masking with the pen tool creates unwanted cropping

    Adobe Premiere Pro CC - 2015.4 version 10.4.0 (30) build

    Operating system - OS X 10.11.6

    Sequence/images - images of reflex digital H.264 in a 1920 x 1080, 16:9, 29.97 FPS

    I'm adding a chart and try to hide a file HAVE with the pen tool. As soon as I click on the tool pen under the control of opacity effect, a small portion of the image is cropped on the right side. Even when I finished the mask, he trims still on the right side.

    Here is what the chart looks like no mask at all. http://i.imgur.com/CtKbvOD.PNG

    Once I click on the tool to start feather mask, it cultures immediately a small part on the right side. http://i.imgur.com/W5ICaJR.PNG

    Even when I change the mask to make sure the mask is not touching the graphic, it cultures still a small portion. http://i.imgur.com/zNTGQ60.PNG

    Here's a short video showing what I want my mask to do (with keyframes) and you can still see the cropped part. https://youtu.be/Sy-Fx4YUc1g

    I restarted the program, re-import the file, delete the chart out my calendar and it added on. Remove the mask and tried again.

    I am at a loss here, but feel like there is something simple that I'm missing. Did anyone had this problem? Does anyone have any suggestions?

    Thanks for your help.

    Is the file have identical to the sequence value.

    How the mask behaves if material MPE turned to the software.

  • I need help creating a vector mask with an adjustable edge or fade, can anyone help?

    I need help creating a vector with an adjustable edge mask or disappear so that I can surround a hand drawn - isolate the background so that I can black out around the hand, the hand a hair above, so I can not just pen tool, can anyone help?

    hand4.jpg

    hand.jpg

    I recommend starting with a layer mask based on the green channel, edition that with the curves to get a decent contrast and then paint in the areas needed.

  • Use an image jpg as mask with transparency

    Hello

    I use photoshop CS6. I have two images like this:

    initial.pngalpha.png

    I would like to use the second as a mask for the first. Also, I would need the final image to have transparent background:

    final.png

    From now on, I couldn't have the last image with white or black background, having the first two images in the form of layers and work with color inversion and layer blend modes, but I can't figure out how to set a transparent background.

    Since there is a gradient there, not going to magic wand.

    Is it possible to get? Thank you.

    Copy & paste the mask directly in the channel mask after you have created an empty mask.

    Mylenium

  • Creating a mask with a visible effect 'discover and stay '.

    Hello

    I searched for a solution to a problem that may seem easy enough for you. I want to create a "magnifying glass" (unconvering an image with a mask after the cursor) - the problem is, I want to let the parties already discovered of the visible image.

    It's like the erasing of the upper layer and discovering the lower layer. I would be grateful if you could give me a helping hand. I've got Flash CS3 Professional

    Image: http://www.fotodruk.com.pl/Miller/

    see you soon

    Use the draw method of the bitmapdata class to add several times your circle to your mask.

  • cannot make the mask with a transparent visor

    Hello.

    I have a footage1 with a screen showing numbers, etc and I footage2 showing a football game.

    I want the screen to display the football game

    I created rectangular layer mask and is a relative of footage2, also tried all options of cache on the layer of footage2 but the mask remains white Uni.

    How can I make this white triangle to show the football game?screen football.jpg

    A matte always uses the layer just above. I guess your "5 solid white" is the hidden layer you want to use as a matte. I suppose also that you want to lock this matte for the layer 'Motion Tracking'. Do the "white 5 solids ' parent layer of the" Brazil... mp4 ' layer means that the layer of "Brazil"... "move with the"5 solid white "layer". I don't know what's on the layer "Brazil"... "but I don't think you want to move it. I do not see a "white triangle", so I guess you mean the White Rectangle.

    Let's start with what I think I know.

    1. You have a layer with numbers and other things. Name this layer "numbers."
    2. You have a layer with images of a football that you have followed. Name this layer "football".
    3. I see what I think, this is a null value in your computer. I think that is where the info of follow-up for the layer of "football". Name this layer "footbalTrackNull".
    4. You have created a solid with a rectangular mask that you want to use as a matte. Name this layer matte

    I think that. If I'm right, then I guess you want to hide the layer numbers, do follow football. I see a few problems. Your "Matt" layer looks like you have drawn the outline of something of no room for the camera. If this is the case, you will have to tell us.

    Set up your layers of composition like this:

    1. mat - footballTrackNull set as parent
    2. numbers - set to follow mat - define footballTrackNull as a parent.
    3. Football
    4. footballTrackNull

    The visibility of layer 1 will be off as soon as you apply the matte. Place the cover on the football. The visibility of the layer 4 can also be set to off, but it does not matter because this is a null value.

    This will move the numbers and the layer mate together because they follow the footballTrackNull

    I hope this helps. The screenshot has us in the right direction, but a better understanding of what you're trying to achieve would also help.

  • Masking with a form

    In the attached picture, I would like to hide everything in the photo outside this form. How do I do that? The form is currently an object Dynamics btw. Do I need to change it to something else first?

    Thank you!

    guy_stretching.jpg

    First of all, fill your white shape in, and then select it. Keep the selection, choose the other layer and click 'make the layer mask. You can then remove your shape.

Maybe you are looking for

  • Thunderbird works with android?

    intend to buy an android tablet, has also taken to use it on my Samsung smartphone

  • HP Elitepad 900 mobile broadband

    Hello I need to set up the mobile broadband on my G1 900 elitepad.  It is running Windows pro 8.1 and all the firmware is up to date. I have install a 3gSIM (Orange), but it is not detected. When I check against the list of devices, I see mobile broa

  • Support for XP being is gradually removed?

    I noticed that my VMWare- base XP 32-bit was slow-to-stop mode when you access Windows Update. So, I went online [IE8] here MS Fixit and went through the usual menu. He came to my version of WINDOWS is not supported. So, I downloaded the Fixit Portab

  • Common handler stopped working displayed every time and guard appearing during the use of the computer

    My computer shows the message box ' common event handler has stopped working ' that appears when using the computer even when left repeatly or reduced to a minimum

  • CC of multiple devices

    Hello I am interested in purchasing your software and would like to know how many devices can I install it on, I have a desktop computer, 2 laptops (1 laptop & a show), a Tablet and a phone and would like to know if I have to buy a subscription to ea