masking of addresses with Vista winmail

Similar Questions

• Sync of Smartphones blackBerry with vista calendar and address book

  Hi, I am new to the Blackberry curve 8310 and Windows Vista.  I can't get my info from my Blackberry to engage contacts and the timing of Vista because it is not recognized by Blackberry.  Any suggestions are appreciated!

  Hello. I am afraid that I did not understand all options regarding the synchronization of my 8310 with Vista calendar still; However, I had success sync my Blackberry with Contacts in Windows Vista, the other day.  After you load the Blackberry Desktop Software, go and click on synchronize, and then click the Configuration tab.  On this tab, click on the button "configure Synch... ».  This brings you to a screen that allows you to choose which office program you want to use to synchronize your info.  Select address book and then click on the "Settings" button... ».  Select Microsoft Outlook Express and click on "next >".  Select what kind of synchronization that you want to perform (if you want a clock 2 channels or just for the synchronization from your phone to the computer or the computer to the phone) and click on "next >", and then finish.  Go out and return to the Configuration tab, click the Sync tab and tap sync now.  Even if you have selected Microsoft Outlook Express for synchronization, to synchronize automatically with Windows Contacts for Vista.  (Or at least mine did).  I hope this helps!

• Issue with Vista wireless

  Computing:   I have a Dell XPS 420 Desktop Computer with wireless capability with a Broadcom 802.11 network adapter g. operating system is Windows Vista Home Premium 32-bit with Service Pack 1

  History: I had my computer since December 2007 and used to access wireless internet with Bellsouth DSL and a Linksys router, and then for the past year, I got paired with a Linksys WRT150N router comcast. I have had no problems to connect to the internet until Verizon Fios has been installed on the Sunday, August 30, 2009.
  That said, I tried with a Dell laptop in windows XP and it is connected. I also tried with a mini computer dell laptop running XP and it is also connected. Yet once again, I say that all three of these computers connected to the internet using Linksys and two different ISPS, it was with the switch to verizon that it has lost its ability to connect.

  Verizon has installed a router wireless Actiontec MI424WR Rev E.
  Firmware version: 20.9.0 (this is the most to date version)

  I can't connect my Dell XPS 420 desktop using a wired LAN connection to the router and establish an internet connection. I'm not able to establish a wireless internet connection. When I try to go wireless, it is said:
  Public Network - unidentified network - Local access only.
  IPv4 connectivity: Local
  IPv6 connectivity: Local
  Media state: enabled
  SSID: FWLK5
  Speed: 54 Mbps
  Number of employees: (all 5 bars)
  Bytes received is always 0

  On the connection tab:
  Name and SSID: FWLK5
  Network type: Access Point
  Network availability: all users
  The checkmarks are: connect automatically in case of beach, connect to a more preferred network if available.

  On the Security tab:
  Security type: no authentication (Open)
  Encryption type: WEP
  Password: (wrong password is in the box)
  Key index: 1

  The properties of the wireless connection:
  Networking
  Connect with: map of network Broadcom 802.11 g
  This connection uses the following items:
  Client for Microsoft networks
  QoS Packet Scheduler
  File and sharing printers for microsoft networks
  IP version 6
  Internet version 4 Protocol
  Link layer topology discovery map i/o driver
  Link Layer topology discovery responder

  Sharing:
  The two boxes are checked:
  Allow other users to connect through this computer network
  Allow the other network users to control or disable the shared connection
  
  What I've tried so far based on reading previous forums discussing this issue.

  1. completely uninstalled Norton 360, including using the Norton removal tool and by calling the customer service of Norton who has accessed the computer and verified the complete removal.

  2 turned off the windows firewall.

  3 make sure the Broadcom network adapter driver has been the most up to date.

  4. people with disabilities and reinstalled the card network Broadcom.

  5 update Windows Vista Service Pack 1 and all other updates installed today.

  6 call Verizon Online support - they reset the modem and tried several things like change the "channel". Nothing has worked. They said to contact the computer manufacturer. They have pointed the finger to be a problem with Vista from the computers Windows XP work.

  7. called Dell: they tried several things with access to remote and says that it is the problem of the router/ISP.

  8. unplug the router several times, waited 5 minutes and plugged in. Has made several rounds of power on the computer as well.

  9. changing a registry key according to Microsoft technical support to disable the DHCP Broadcast flag in windows vista (I'm not entirely sure I did correct it because I didn't know what was the GUID) http://support.microsoft.com/kb/928233

  10 disabling IPv6 (by unchecking it)

  11 disabling IPv4 (by unchecking it)

  12 Ran IPConfig to confirm I have a valid IP address (starts with 192 and is valid I don't know if I should post the full address)

  13 fact MSCONFIG with reset winsock

  14 changed the settings TCP/IP by netsh int ip reset at the command prompt, and out, and then uupon done restart ncpa.cpl in the start menu and unchecked the tcp/ip v6 Protocol restarted the computer.

  15. don't attempt to ping a website - no Exchange packets, error message cannot find the Web site. I tried www.google.com and www.verizon.com

  I am at a loss of what I can do to get my computer back operational wireless. Due to the entire office to the top of our House, I would really like this computer on another level and the only way to accomplish that without drilling the holes through the walls that it it works wireless.

  Any other advice would be greatly appreciated, thank you.

  Here are my stats from config IP:
  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\Summer>ipconfig

  Windows IP configuration

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Home

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Home
  Link-local IPv6 Address...: fe80::ad73:7 has 47: 8938:68e7% 12
  IPv4 address...: 192.168.1.5.
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : fe80::7d25:2521:81 d 1: c3ca % 12

  192.168.1.1

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 15:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Home

  PING data:
  Microsoft Windows [Version 6.0.6001]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Users\Summer>ping www.google.com
  Ping request could not find host www.google.com . Please check the name and try one
  gain.

  UPDATE:   I rented the "Geek Squad" to come look at my system. The poor guy spent 3 hours going through all stages. Finally a last ditch effort he has installed a new NIC card. Bingo that fixed for some reason any. Apparently, the old NIC card was bad, even if the system was saying that it was good. The old NIC card was allowing him to connect to the router but no internet. He said it was weird, but the problem is SOLVED!

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Problem with Vista and XP computers Internet connection sharing.

  I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wireless connection. I'm sharing the Broadband2Go internet connection by using Internet connection sharing. I enabled sharing on the network, on the host computer connection. But the laptop does not connect to the internet. I can ping the host of the laptop, but cannot ping the laptop computer from the host. I have tried everything I can think of, to get the job of network. He worked, until Thursday. Thursday, there is some automatic updates installed on the host computer. They have been updated for security. I don't know if updates of security would have affected the network or not. All helkp would be appreciated.

  Thank you

  Oscar

  It is a facility that is complicated, because the host computer and the MN-700 can act as routers and DHCP servers, making it uncertain given the laptop its TCP/IP configuration.  Here are two ways to make it work:

  • Use the MN-700 as a router: connect the host computer to the "Modem" port of the MN-700.  To do this, interface LAN of the MN - 700 must have an IP address in a different subnet from the 192.168.0.x subnet that uses ICS.  The laptop will be able to ping on the host, but the host will not be able to ping from the laptop.

  or:

  • Use the MN-700 as a point of access only, not as a router: connect to the host computer to one of the MN-700 Ethernet ports and disable the DHCP server integrated of the MN-700.  Both computers should be able to ping each other.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.

• Unable to connect to a wireless network with Dell Inspiron 1525 with Vista

  I set up a wireless about a week ago and have done with the following security features: WEP, activate only certain MAC address to connect and disabled to broadcast the SSID.  I was able to use it very well with my Mac computer using the airport, but when I tried to connect my roommates, a dell inspiron 1525 with vista computer, it can not connect.  I can locate the network but when I try to connect to the network, I get a message saying that for a Windows cannot connect to the network and that the wireless link has failed for unknown reasons.  He then said to contact your administrator, but it's me.  I have a basic knowledge of computers just enough to be dangerous and basically know what I'm going along.  If anyone has any advice for me, my roommate and I'll be very grateful.

  Thank you

  -Jill

  Too bad.  Apparently, I got the wrong MAC address.  I am now connected.

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  My laptop with Vista travels continuously by a "not connected" to "limited connectivity" to "connected." What should I do?

  Hello

  Try Microsoft fix it in the next article

  "Windows Vista cannot obtain an IP address from certain routers or some non Microsoft DHCP servers": http://support.microsoft.com/kb/928233

• Copy and paste into Vista Winmail.

  Hello

  How can I copy and paste a complete email, text, AND images in Vista Winmail? When I try, I highlight text and images and copy all the t5he highlighted text and images, but when I paste into Word or Notebook, the text has been copied, with empty spaces where the photos were.

  Happy to help you!

  Steve

• iMic compatibility with Vista?

  IMic compatibility with Vista is?

  If this isn't it:

  http://www.griffintechnology.com/products/iMic/

  to learn more.  If it is, the site says no.

  "kittylizmom" wrote in the new message: * e-mail address is removed from the privacy... *

  IMic compatibility with Vista is?

• I have a disk with win 98 and I would like to know how to install it on top of a tower with vista home premium on it.

  My lap top has vista home and I tried to install Win 98 on a drive. I get messages saying that it can not be installed.  The installer on the disc advises to install using MS-DOS. However, the file of course dosen't address install on a computer with vista home. I am not able in the BACK. I'd like some simple instructions to install it if it is possible.

  You need to do using a Virtual Machine (Finally, there are other ways, but this is the simplest and the best option). http://www.dnncreative.com/Tutorials/DNNTutorialsforAdvancedUsers/VirtualPC/tabid/394/Default.aspx.

  Once the virtual machine is configured, see the follwng on how to install Windows 98 on it:http://www.vistax64.com/virtual-pc/174999-re-installing-windows-98-a.html.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Centro cannot perform an initial synchronization with vista 64

  Well, I have this centro to verizon and a bluetooth adapter and the last access of Palm software. Everything is installed. Everything sees the other. But when I start the synchronization between the centro and the vista, it hangs on the Agenda second on the list of things that it syncs. It never advanced past this point and believe me, I HAV left "synchronization" for 45 minutes without change. Then I open the Task Manager and end task in frustration. BTW, the centro can synchronize with my XP and my palm TX bluetooth sync with vista. I have uninstalled and reinstalled software Acess and synchronizations of TX, but not the centro.

  What you're suggesting?

  Oh, I'm a simple girl, I need advice. Where can I find the book date leads to uncheck? I know that I found in the synchronization of verizon software and unchecked on the Agenda, addresses, media one and left only email. Which is probably stupid too since I use versamail and not their e-mail. But I'm not clear on how to proceed by unchecking the agenda and with which machine to do this and to place the dbfixt to run check the agenda. I guess it all must happen on the centro since it has alleged corruption? And a sidebar which is today, I could not cable sync on my XP work with the centro... with the same problem, I got on the vista home. So I tend to believe the Agenda corrupted on the theory of centro. Just not clear on how to proceed with the fixing. Thanks for your help.

  Message relates to: Centro (Verizon)

• I have currently 2 Email addresses with Mozella, I am wanting to get rid of one, but I want to keep some of the emails to the email address. How can I keep t

  I currently have 2 Email addresses with Mozella, but I am wanting to get rid of one as my main one, but I want to keep some of the emails to that Email address.
  How can I keep these emails but still not got rid of the email address and does not lose the one I want to keep?

  I currently have 2 Email addresses with Mozella

  Or, you have an e-mail with "Mozella" or Mozilla. Mozilla is not an e-mail provider.
  You do not have an account with your e-mail provider, and you access this account via Mozilla Thunderbird.

  How can I keep these emails but still not got rid of the email address and does not lose the one I want to keep?

  Move all the messages you want to keep your local folders account. You can create subfolders under "Local folders" to replicate a folder hierarchy, you can have for the account to be deleted.

  Manually create folders, do not try to move entire folders.
  Then copy the messages in a folder at a time.
  Do this by selecting the messages can be completely copied to the source folder. Then a selected message - copy, right-click and choose the destination folder.
  Once the messages have been copied successfully, you can delete them in the source folder.
  Once all messages to be kept have been copied to local folders, safely, you can delete the account.

• I have 2 email addresses with iCloud

  Can I have 2 "separated" with iCloud email addresses?

  For many years, I use 2 accounts POP from Verizon.   I am now looking to switch to a provider that I can use with the Mail of Apple Mac program that would be IMAP.

  I read about setting up email aliases iCloud accounts. But I've read that when an e-mail is sent to the alias email account, it is sent to the email account primary iCloud.  That wouldn't do me any good. I have 2 email addresses with 2 inboxes and 2 boxes of feel, (which I have now with Verizon).

  Thank you!

  Yes, you can set up as iCloud (or other types of) e-mail accounts as you want. When you open the app on Mac Mail, click mail accounts in the menu bar.

  Then click the iCloud in the pop up box, and you will see the following text:

  

  Click on the "Create Apple ID" option and then set up a new email iCloud.com address.

  You can then view your primary e-mail address and your secondary email address in your mailbox separately:

  

  Now in my Email application:

  

  You can see that each of my mailbox has two entrances. One for iCloud (which is my primary email in iCloud account) and one for my second address iCloud. The mail for each of them is separate, and I don't extend the Inbox to view, then click on the one that I want to see the mail on.

  See you soon,.

  GB