mass storage device not recognized

my computer does not recognize a storage device. How can I solve the problem.

I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

Tags: Windows

Similar Questions

  • BlackBerry Smartphones Mass Storage device not recognized...

    I am running Windows XP (Media Center Edition) and at the time where I was using a 8320, I didn't have this problem... but now that I have a 8330, my computer does not recognize the MicroSD card, I got plugged into my phone. It's literally the same card that was in the 8320, and otherwise everything else works perfectly.

    It is listed as an unknown in my Device Manager device, specifically as a "RIM Composite Device".

    * I already uninstalled the drivers of BB on my computer and reinstalled them.

    * I already uninstalled DM and reinstalled - not that I thought he would do anything, but it was worth it.

    * I went to the Microsoft support site and tried to use the drivers they have there.

    * I tried to disable the driver in my device manager and tried to force XP to recognize the device. No dice.

    UH... that's all! Any suggestions?

    Just an update to this issue.
     
    It is not really a solution, but I am sick of XP Media Center Edition, so I did a complete reformat of my laptop and installed XP Pro (as the words of God!) Long story short, my computer is recognizing the card support very well now. I can only assume there was some parameter of the register or glitch in my MCE that prevented the drivers to work as they should.
     
    Anyway, solved! Thanks for the help!

  • Dlink DNS-323 storage device not recognized by network

    Am a Toshiba Satellite C650 with windows 7 on a home network with a storage device Dell PC and DLink DNS-323 with router DLINK DIR - 815 Dualband operation. Installed the router a few weeks ago and no problems. Software Bitdefender also installed at that time as well, but had no problem. Now I can't get the files for the Dlink DNS-323 is displayed on my laptop in the network so that I can back up files on it. He occasionally appears him disappear. Network will recognize the PC and shows the DNS-323 it is does not display the icon that allows me to access the files. Any help will be appreciated.

    Hello

    I suggest that you try to look the link below and see if it helps.

     
     

    Hope this information is useful.

  • USB not installed correctly, print USB media, mass storage device USB Composite device

    I am running XP and I get these 3 messages peripheral USB Composite USB and USB Mass Storage Device not installed correctly print media. What should I do? Thanks for any help.

    Have youre pc hardware written info if necessary (chipset), & its mfg (intel, amd, etc.).

    go to the website mfg, downloads, get the chipset Chipset youre Installer and install it.

    This gets you drivers/software for sound, USB etc.

  • Mass storage device is not recognized in Windows 7 (x 86 and x 64)

    My mass storage device has been recognized in Windows 7 before with pilot USBSTOR. SYS (ver 6.1.7600.16385). However, it is not recognized more with the new driver USBSTOR. SYS (ver. 6.1.7601.17577)

    My mass storage device can be recognized by Windows Vista (x 86) as a removable disk (FAT file system).

    Y at - it a fix for this problem for Windows 7?

    Thank you.

    Allen

    Sorry I've updated my question that the current VER is 6.1.7601.17577 and it does not see my mass storage device which is a feature of WinCE 5.0 in charge of priming mode.

    The previous version 6.1.7600.16385 works well because I have a test PC Win7 did not install all updates.

  • GPS (global positioning) will not work. Lack of USB mass storage device

    When I plug my GPS device into the usb port and driver disk into a dvd, where both worked, the installation wizard gives me a notice of default. Reference to the Device Manager shows 2 yellow? mark. Use of the facility of re - install and update does not solve the problem. I get a message indicating that a usb mass storage device is missing. Insertion of other devices on the usb port in question, or any other, says there is nothing wrong with any. Does anyone have an answer

    Hello

    You are able to correctly use the other USB devices on your computer, I recommend you contact the manufacturer of the GPS (global positioning satellite) for assistance.

    Hope the helps of information.

  • Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

    I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

    Hello

    1. what happens when you plug the device to your computer, you get an error message?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1:

     Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

    Method 2: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 3: Also try to follow the steps from the link below.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

    Hope this information is useful.

  • USB 2 not detected mass storage devices

    Windows XP SP3 USB - 2 ports do not detect mass storage devices (reported as unknown device).  Same device is detected and works OK on the USB-1 ports.  Function USB - 2 ports for printers and mass storage OK no (no brightness, without removable hard disks).  Have tried all the simple fixes found on support.microsoft.com.  No success yet.

    Hi Lostcauseracing,
     
    Follow the steps in these articles and check if it helps in fixing the issue:
     
     

  • BlackBerry showing only not as mass storage device

    When I connect my blackberry to my Vista computer, it does recognize it as a storage device.

    Hi RodneyThomas,

    Do you get any error messages? What is the exact error message?

    ·         Find out which software and devices are and are not compatible with Windows Vista.

    ·         Look for links to drivers and upgrades that will make your compatible computer.

    Windows compatibility:

    http://www.Microsoft.com/Windows/compatibility

    Try to install the software by using compatibility mode:

    Run the program compatibility Wizard

    1. open the program compatibility Wizard the by clicking the Start button, click Control Panel, clicking programs, and then clicking on use an older with this version of Windows program.

    2. follow the directions in the wizard.

    If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    Similar problem applies please, check out the links below:

    http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

    http://www.BlackBerryForums.com/General-BlackBerry-discussion/6764-USB-device-not-recognized.html

  • My Celler mass storage device will not work on Windows 7

    I have a storage device mass of Celler that has always worked with several computers, now on Windows7 home premium 64-bit, that it says it can't find the drivers. I had Windows search for drivers, but the attempt failed. All solutions? It's most basic 2.0 mass storage device.

    Contact the manufacturer of the device on the drivers for it.

    The manufacturer has written drivers for their products, not Microsoft.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 Hardware/Software Compatibility Center.

    http://www.SevenForums.com/tutorials/316-compatibility-mode.html

    How to run a program in Compatibility Mode in Windows 7 is at the link above.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forums.

    There is a list of the Windows 7 Forums at the link above to help you.

    You get the help you need there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Message "USB Mass Storage Device does not work properly"

    Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

    I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

    Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

    Hate to be chatty but I wanted to present all the facts.

    Can someone please help me get this figured out? Thank you in advance.

    Hello Sammy,.

    Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

    Microsoft does not recommend using third party software melody. That running these software can damage records.

    For the problem with the error code 10, I would ask you to try the steps below:

    A Code 10 error is generated in the Device Manager in one of the following situations:

    1. Device Manager cannot start the device.
    2. One of the pilots who needs the unit does not start.
    3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

    Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

    Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

    I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • Peripheral mass storage USB is recognized as DVD player while the original disc is missing

    Hello

    I use windows vista Home premium (32 bit) on my HP pavilllion laptop. After getting updated for service pack 2 for vista my dvd player was absent. I was using Microsoft fixit to solve the problem and the use of the internet by wireless USB reliance data card and my laptop has recognized this usb mass storage device, dvd player and I have uninstalled this usb device several times as I tried to restore to their original factory condition, but my problem has not been resolved. Help, please

    Hi ss_gour,

    Please see an additional post that resembles your problem with a possible fix:

    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/d416cfcd-366B-4B50-B976-29b5edc169c1/

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • USB recognsied but mass storage devices won't allow drivers to be loaded "access denied."

    installing the drivers for them, but when I plug them in I get the message 'new hardware found, windows found driver software for your device but encountered an error while trying to install' access denied.

    I have renamed and deleted the infcache.1 but it does not work

    Hello

    Check here first:

    Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
    more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
    C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
    If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
    and if doesn't work does not correctly return to this step.

    Check again once you advance through them.

    2nd check these:

    Operating instructions: find 'lost' Windows Vista drivers when you add a new device
    http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    -------------------------------------------------------------

    If no joy:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    --------------------------------------------------------------------
    Check this box:

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
    drive letter assigned is not the one you used to see. This may show of course not the
    Road at all, it's just a check.

    -------------------------------------------------------------------
    http://www.Uwe-Sieber.de/usbdlm_e.html
    Its complex however, the site has a lot of help.

    And all this?

    See also this thread and those it refers too.
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Mass storage device USB WD Passport 070 has

    I recently bought a WD Passport 070 (1 to) a USB mass storage device... I went through all the appropriate channels to get it recognized on my windows vista computer, and all said that it works well. (I did the whole Device Manager/uninstall everything and then analyzed for new and checked and then in disk management and said it's very good)  My problem is... Where/how you get?  in fact it open and start to transfer things to my portable hard drive?  Thanks for your time

    You have not said if the drive is formatted.

    Hard drives, which are main storage on your computer, need to be formatted before using them. Formatting a disk means configuring the disk with a file system so that Windows can store information on the disk. Already the format of hard disks in new computers running Windows. If you buy an additional hard drive to increase the storage of your computer, you may need to format.

    Formatting disks and drives
    http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

    I hope I could help

  • It lacks a computer on my new USB mass storage device.

    When I plug my two sticks of SanDisk U3 into my computer, my brand new computer does not recognize them. I passed to the Device Manager and looked under controller universal serial bus, while it is in my USB and the mass storage deivce is not displayed. I have windows vista on this computer and my laptop. These work on my laptop very well, but not on this computer. I bought the full version of Windows Vista and have the disk. I have this installed on 1 computer.

    Hello

    Check with SanDisk support because they have excellent online support, including live Chat and documentation.

    SanDisk - Support
    http://KB.SanDisk.com/app/home

    See also the appropriate bodies of SanDisk:

    SanDisk - Forums
    http://forums.SanDisk.com/

    http://www.SanDisk.com/SanDisk-support/forums

    ===================================

    Added troubleshooting:

    Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
    more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
    C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
    If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
    and if doesn't work does not correctly return to this step.

    Check again once you advance through them.

    2nd check these:

    Operating instructions: find 'lost' Windows Vista drivers when you add a new device
    http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    -------------------------------------------------------------

    If no joy:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    --------------------------------------------------------------------
    Check this box:

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
    drive letter assigned is not the one you used to see. This may show of course not the
    Road at all, it's just a check.

    -------------------------------------------------------------------
    http://www.Uwe-Sieber.de/usbdlm_e.html
    Its complex however, the site has a lot of help.

    And all this?

    See also this thread and those it refers too.
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for