Mass storage device USB WD Passport 070 has

I recently bought a WD Passport 070 (1 to) a USB mass storage device... I went through all the appropriate channels to get it recognized on my windows vista computer, and all said that it works well. (I did the whole Device Manager/uninstall everything and then analyzed for new and checked and then in disk management and said it's very good)  My problem is... Where/how you get?  in fact it open and start to transfer things to my portable hard drive?  Thanks for your time

You have not said if the drive is formatted.

Hard drives, which are main storage on your computer, need to be formatted before using them. Formatting a disk means configuring the disk with a file system so that Windows can store information on the disk. Already the format of hard disks in new computers running Windows. If you buy an additional hard drive to increase the storage of your computer, you may need to format.

Formatting disks and drives
http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

I hope I could help

Tags: Windows

Similar Questions

  • Mass storage device USB cannot start. Why?

    When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

    It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
    [Window title]
    Installing the software driver
    [Main instruction]
    Device driver software was not successfully installed
    [Close] [Window title]
    Installing the software driver
    [Main instruction]
    Device driver software was not successfully installed
    [Close]
    Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
    "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
    Driver version: 6.1.7601.17577
    Driver date: 21/06/2006

    Hi Jessica,.

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    I suggest you follow the steps in the link given below which will help you solve this problem.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

  • What resources the mass storage device USB use?

    This device is disabled. (Code 22)

    Click Enable device to enable this device.
    I can not activate a USB mass storage device and reading that a resource conflict may have caused to be disabled, what resources use USB mass storage device?

    Hello

    You can check this link:
  • USB not installed correctly, print USB media, mass storage device USB Composite device

    I am running XP and I get these 3 messages peripheral USB Composite USB and USB Mass Storage Device not installed correctly print media. What should I do? Thanks for any help.

    Have youre pc hardware written info if necessary (chipset), & its mfg (intel, amd, etc.).

    go to the website mfg, downloads, get the chipset Chipset youre Installer and install it.

    This gets you drivers/software for sound, USB etc.

  • Mass storage device USB are most recognized

    Hello! I use Cavalry 1 TB drive external HARD for a year now.

    It was working fine until what a week ago it stopped working all of a sudden.

    I can see the lights are on on the device, I can hear the disc rotation, but my computer will not recognize it.

    I tried it on 5 different computers, and I'm sure that's not for lack of USB.

    When I try to give him a letter via using the tool administration and management of the computer, it says

    the disk2: is unknown, not initialized, when I try to boot, I get an error message saying Virtual Disk Manager: incorrect function.

    I tried to reinstall the drives USB and all the stuff that I met while I was looking for forums.

    Can someone help me with this problem please?

    At this point, I think it's rather physical HARD drive is defective... but guarantees that the data losses are not covered by the company if I'm afraid to use the solution from the manufacturer. If I can't make it work, it's good, but at least I need to know how to get

    the backup data.

    Thank you.

    Try this 1:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    If the Hd has failed, only we can advise you on the normal methods to retrieve data, and involving the system recognizing the HD in a box.

    Or using Knoppix as a possible solution:

    Knoppix Live CD to recover your data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Administrator has restricted this computer to access the USB/1394 mass storage devices

    This message just started showing unexpectedly. Sometimes windows load. It is not and has never been a business machine, so I am the administrator.

    He has blocked my external hard drive up and now won't let me even to read a memory stick. In this case, I get «the administrator has denied access to USB/1394 mass storage devices»

    I searched through everything, and everything seems ok. I ran several controls of virus and spyware checks, but all come clean.

    I hope someone can help me. Thank you.

    You use Acer computer?

    If so, then uninstall: Acer LanScope or update and see if that resolve the problem.

  • Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

    I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

    Hello

    1. what happens when you plug the device to your computer, you get an error message?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1:

     Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

    Method 2: Try running the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 3: Also try to follow the steps from the link below.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

    Hope this information is useful.

  • USB Mass Storage Device problem

    I have the HP Pavilion Elite E9120f desktop computer. Whenever I start the computer, it shows that I have USB mass storage drives, G, H, I and J. However, there is no attached USB mass storage device. No one knows why this happens? I just usually click on the removal of the safety equipment and remove false devices. I get the message "this device can now be deleted without the computer problem. This machine runs Vista and has a 1 terabyte of hard drive. Thank you

    Bart, have you checked in 'My Computer' when this happens to see if the drives are there?  Almost looks like you have a virtual drive on your computer program.  Check also in start/startup to see if he is there that nothing listed that could cause this to happen.  Four readers Ghost is really strange.

  • Installation question on Satellite M30 PSM30E USB mass storage device

    Hi people,

    I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

    "There was a problem installing this device:"

    USB mass storage device
    An error occurred during the installation of the device
    These data are incorrect

    What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

    Anyone has any ideas at all?

    See you soon

    Hello

    What series of notebook or laptop model do you have?
    Could you please put the whole number? It would be very useful for further study.

    All the installation driver Toshiba must be made in the right order.
    In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
    You must follow these instructions to ensure that all drivers would be executed correctly.

    Concerning

  • USB recognsied but mass storage devices won't allow drivers to be loaded "access denied."

    installing the drivers for them, but when I plug them in I get the message 'new hardware found, windows found driver software for your device but encountered an error while trying to install' access denied.

    I have renamed and deleted the infcache.1 but it does not work

    Hello

    Check here first:

    Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
    more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
    C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
    If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
    and if doesn't work does not correctly return to this step.

    Check again once you advance through them.

    2nd check these:

    Operating instructions: find 'lost' Windows Vista drivers when you add a new device
    http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    -------------------------------------------------------------

    If no joy:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    --------------------------------------------------------------------
    Check this box:

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
    drive letter assigned is not the one you used to see. This may show of course not the
    Road at all, it's just a check.

    -------------------------------------------------------------------
    http://www.Uwe-Sieber.de/usbdlm_e.html
    Its complex however, the site has a lot of help.

    And all this?

    See also this thread and those it refers too.
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • It lacks a computer on my new USB mass storage device.

    When I plug my two sticks of SanDisk U3 into my computer, my brand new computer does not recognize them. I passed to the Device Manager and looked under controller universal serial bus, while it is in my USB and the mass storage deivce is not displayed. I have windows vista on this computer and my laptop. These work on my laptop very well, but not on this computer. I bought the full version of Windows Vista and have the disk. I have this installed on 1 computer.

    Hello

    Check with SanDisk support because they have excellent online support, including live Chat and documentation.

    SanDisk - Support
    http://KB.SanDisk.com/app/home

    See also the appropriate bodies of SanDisk:

    SanDisk - Forums
    http://forums.SanDisk.com/

    http://www.SanDisk.com/SanDisk-support/forums

    ===================================

    Added troubleshooting:

    Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
    more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
    C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
    If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
    and if doesn't work does not correctly return to this step.

    Check again once you advance through them.

    2nd check these:

    Operating instructions: find 'lost' Windows Vista drivers when you add a new device
    http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    -------------------------------------------------------------

    If no joy:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
    USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
    Try to remove all instances and restart then plug the drive.
    http://www.NirSoft.NET/utils/usb_devices_view.html

    --------------------------------------------------------------------
    Check this box:

    Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
    Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
    drive letter assigned is not the one you used to see. This may show of course not the
    Road at all, it's just a check.

    -------------------------------------------------------------------
    http://www.Uwe-Sieber.de/usbdlm_e.html
    Its complex however, the site has a lot of help.

    And all this?

    See also this thread and those it refers too.
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

    Original title: problem ejecting USB Mass Storage Device

    When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

    Hi a. Cook,

    (1) how long have you been faced with this problem?

    (2) is limited to any specific USB device?

    This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

    Method 1:

    (a) Download Process Explorer from the link below

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

    (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

    (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

    (d) find the process and its PID (process identifier) in the following box.

    (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

    (f) press Ctrl + H to display the handles in the view in the lower pane.

    (g) find the file according to the drive letter and right click, choose Manage close.

    Reference:


    Problem ejecting USB mass storage device
    http://support.Microsoft.com/kb/555665

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2: You can see the steps in the link below by Diana d.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

    Method 3: A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

  • Problem ejecting USB Mass Storage Device [Unlocker doesn't work]

    Hey everybody,

    Just like everyone else, I get a pop-up message when trying to eject my external hard drive WD: "problem ejecting USB Mass Storage Device. Windows can't stop... "and so on." This does not work when I've only sailed on the disk, but it does, for example, when I made a mistake - check or make a backup. I already checked the forums, but unlike everyone else, third-party programs do not work for me.
    I did the following:

    -closed open task

    -disabled virus scanner

    -used Unlocker and Process Explorer, but he can't find any process that locks my drive. What happens here?

    -rebooted in safe mode

    -disabled indexing

    It makes me crazy that I have to restart whenever I want my drive to eject.

    Oh, and I use Windows 7.

    Can someone help me solve this problem?

    Hello

    (1) is limited to any specific USB device?

    (2) did you try to connect the device to a different USB port and check if you are facing a similar question?

    This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program. Follow these methods and check if that helps.

    Method 1:

    I suggest you run the hardware and devices Troubleshooter to check if it helps.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    I suggest you to check and clean the boot if any third-party program is causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/929135

     

    Warning: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

     

    Connecting and disconnecting USB devices:

     

    Most USB devices can be removed and disconnected at will. When you unplug the devices of storage, such as USB flash drives, you should be sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

    If you see the icon remove the device safely in to the far right of the taskbar notification area, you can use this to ensure that devices have finished all operations in progress and are ready to remove. Click the icon and you will see a list of devices. Click the device you want to remove.

    You can use any USB port when you plug in a device you have installed beforehand. However, the first time you connect a device to a particular port, Windows will install the driver for this device again.

  • Message "USB Mass Storage Device does not work properly"

    Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

    I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

    Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

    Hate to be chatty but I wanted to present all the facts.

    Can someone please help me get this figured out? Thank you in advance.

    Hello Sammy,.

    Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

    Microsoft does not recommend using third party software melody. That running these software can damage records.

    For the problem with the error code 10, I would ask you to try the steps below:

    A Code 10 error is generated in the Device Manager in one of the following situations:

    1. Device Manager cannot start the device.
    2. One of the pilots who needs the unit does not start.
    3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

    Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

    Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

    I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • USB mass storage device driver problem

    I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

    I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

Maybe you are looking for

  • iPad Pro cover/Stand for movies in bed

    Hello I got my mom a Pro iPad mainly so that she can watch movies and tv shows on netflix. And usually, she likes to watch in bed. It allows to use his Macbook, which she lay on the mattress or uneven rugs and just look. Now, with the iPad pro, it's

  • Repair XP

    I am running XP Pro.  System Restore never worked since I used it first and my trash has become corrupt, useless.  Is it possible to restore or repair otherwise these features without a complete reinstallation of the operating system?  System Restore

  • JSP_EXECUTION_FAILED on a few sites.

    I get this error on a few sites and my friend is notIs there some update of software I need?Java?

  • Unable to empty trash

    I have not been able to empty my trash for a while. I am slot that Win7 Ultimate 64-bit.Through this forum I see that others have had the same problem, but not "Found this helpful" or "Solved" assignments. I tried various solutions proposed, but in v

  • Union all with addistional field

    HelloMaybe this is a stupid question.I have two tables with 22 columns.Another table with 23 columnsI want to combine these two tables using union all.In the first picture, I want back "NA" as the last field.In the second table, last column is varcha