Mass USB storage does not work on the Satellite a series

Similar Questions

• Pad touch and function Fn + F5 does not work on the Satellite a series

  Hello

  I just install a windows Vista & I have install the driver after download it from the net, but I found this;

  1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)

  2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work

  So please tell me the solution if it is a problem of driver or program.
  Please give me the direct link

  thinku

  Hello

  What cell phone do you have?

  I imagine that your laptop comes with XP and now want to use it with Vista OS.
  Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
  Very important is the pilot of common components and the TOSHIBA Flash Cards.
  The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
  Please reinstall!

  The additional touchpad functionality must be configured first.
  This can be done in the control panel-> mouse

  Here, you should look for the touchpad settings and able to configure touchpad again scroll areas.

  Good bye

• Touchpad does not work on the Satellite a series

  Greetings!

  I have Toshiba Satellite and I have a touchpad issue.
  My touchpad does not work. I downloaded the drivers for it, and it still does not.

  Is someone can you please help me solve this problem?

  Thank you.

  What do you exactly mean with it s not working do not?

  What cell phone do you have? Have what the touchpad driver you installed?

  Have you checked if the touchpad was not disabled?
  Using the FN + F9 key combination, you can disable and enable the touchpad feature!

• DVD/CD drive does not work on the Satellite L series

  My dvd player was working fine now, it is not on my computer.
  I can not restore from the product disc, such that he won read any type of dvd or cd disc.
  Can you help me?

  Hello

  At first try this please: http://support.microsoft.com/kb/270008

  If this does not please write again.

  By the way: put a recovery media in the DVD drive and try to start the recovery procedure. You will see that it will work. I guess described issue is only a problem of BONE and drive should work if you want to install the new OS.

• DVD drive does not work on the Satellite a series

  This is the second time that my dvd player did not work
  He is coming like theres a problem with code 39 what I do!
  I started to follow someone other advice when you remove the
  drive and then reboot computer laptop but I do not know how
  to restart the laptop because I don't know what it is!
  Can anyone please help me I need to use the DVD player!
  I already deleted the drive until I do now!
  Help, please?
  Thank you

  Rhian
  x

  Hello

  Please can you give a more detailed description of your problem? What do you mean by "but I don't know how to restart the laptop because I don't know what it is!

  Do you mean Don t you know is that a laptop? A laptop means that the mobile computer in front of you. Other terms may be ", computer, laptop ', quite simply, that thing that contains your dvd player and your windows...

  Would be acknowledging honestly comment ggod from you.

  See you soon

• MASS USB STORAGE DOES NOT WORK

  I use Windows XP Edition family, recently computer reprogrammed and somehow, the computer can not detect my USB when I inserted into the USB... I checked my computer hardware and drivers and seems that their isn't USB drivers in the list... How do I remedy this ad where I can get the USB mass storage that compatible with my Windows XP Home Edition?

  After you install an operating system, you must then install the drivers for all your hardware. Installation of the motherboard (chipset) drivers should do the work for you even if you also install all missing drivers. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows
  MS - MVP - Elephant Boy computers - don't panic!

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• 2.60 BIOS does not work on the Satellite A200 - 22 c

  Hi all

  I made the mistake to Flash my old bios Satellite A200 - 22 c (PSAE6E) to the new version 2.60.

  As I did this, the keyboard does not work on the bios screen, so I am unable to manage anything in the BIOS.

  When Windows Vista 32B starts the first time, the keyboard does not work. If I close the session and then I it again, it works correctly.

  The touchpad is lost and I need to use a USB mouse. Is not a pilot cause problem, all the drivers are updated and are working properly.

  The question is: why Toshiba didn't allow users to download the old version of the BIOS? ¿WHERE or who do I contact to get the original BIOS? Why do the flashing utility make a backup of the OLD BIOS and then does not give you the ability to recover it?

  Please, help me to recover the original BIOS to retrieve my keyboard and my touchpad because I can´t find any message or anything like that to get in touch with the technical support of this web site.

  Thank you!

  Which version was old BIOS?

  By the way: you can contact Toshiba. They have access to the Archives of BIOS and they can provide you with older version of BIOS.

• Nokia PC Suite does not work on the Satellite A100-234

  I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.

  Please send your valuable suggestions.

  Hello

  Could you please be more specific?
  Did you get the error messages or something else?

  Maybe something is wrong during the installation procedure
  So I recommend removing this Nokia program and try to install it again.

  In addition, I would recommend checking the PC Suite FAQ on the website

• Driver Chicony webcam does not work on the Satellite A200-13O

  After the misfortune that occurred to my webcam, I tried to fix it by uninstalling the driver and then put it back in place (by the toshiba Web site).
  I did this twice and it does not work,
  allthought the pc installed the driver, the camera was not working because a file was for win95 and my pc has vista.

  After several reboots, I made the following
  -Start
  -all programs
  -camera assistant software
  -Right click
  -options (the last button in the right click menu...)
  -compatibility
  -Select work in win95 compatibility
  -ok
  Sorry for my English, I am Greek and my menu vista also... :))
  If anyone wants more details please to contact me.
  I hope this could help those in despair...

  Hello

  Yes I would like some details;).

  For example: manufacturer who is the camera, it is built, made, he has worked previously, and so on...

  So there is a lot to say, have you ever said to the second part, but I'm missing a few things as I've described above. By the way: you can try to recover your machine, if you really need on your camera, but it is really the LAST RESORT.

  Good bye
  John

• USB loader does not work with the Defy

  Hey people,

  I myself built a USB socket for installation in my car (in a plug for one of the slots to spare for switches). Technically, it's really simple with a voltage of 5V regulator which limits the 12V battery voltage to 5V for USB. Because I want to only use the sockets to recharge USB devices

  (iPod, phone, GPS,...) in the car, I left the data open pins. Today, I hung my little gadget up to a power supply of 12V, measured at the exit of the catch USB for correct voltage and polarity and then hung my Defy. Unfortunately, it does not work. I was pretty well clueless, what could be the issue so I asked some of my colleagues to hang their phone (HTC Desire, HTC Hero and HTC Desire HD), and each of them has worked well.

  Someone has any idea of what I need to do to get this working? He wants to talk to the USB to determine what port it is connected to a Motorola phone (for some reason any)?

  Thank you very much!

  Jan

  For your application, simply short-circuit the data pins.

• Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

  The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

  It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

  It is very disturbing. Thank you.

  Hello

  have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

  If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use