Mast of Qosmio G20 * a DVD-RAM UJ-846

Similar Questions

• I want to replace the DVD-RAM UJ-846 for Qosmio G20-127

  Hello

  I want to replace my carpet * a DVD-RAM UJ-846 of the G20-127.
  Someone knows his apare part # and any sugestion wich RAM is compactables for my machine and better plase to get?

  Hello!

  If you want to replace your CD/DVD drive, you should look in your user manual. It should be a list of compatible drives that work with Notepad. Check it!

  The new RAM should be a SO-DIMM DDR2-533. The part number for 1 GB is PA3411U-1M1G.

  Finally and most importantly the best place for spare parts is the authorized service provider. They order all the original parts of Toshiba and the Toshiba site, you can search for the closest.

  Good bye

• Qosmio G20-139: update firmware UJ - 846 - target drive is not connected

  When I try to update the firmware of my DVD Ram [uj - 846 s] on my g20-139. I doubleclick on the exe.prog and I get the message "target drive is not connected.

  I click on ok, then nothing more! There should be another box popping up for the prog run!

  Help

  Ogilvie

  Hello Ogilvie

  Where did you get the firmware for the drive? Is there a particular reason why you want to do this?

  Please be careful about this. If you use non-Toshiba warranty for the drive firmware will be canceld.

• Qosmio G35-av600 - DVD - RAM problem

  Hello

  the drive from DVD-ram to my Qosmio G35-av600 died suddenly, he would not read something, so I went to come in and buy a replacement (the model is UJ-856-C), but when I changed the drive and starting the pc, I get an error saying error of CD-rom (I saw in another forum it takes with master-slave config), could someone please help me?

  Thank you very much, any help would be appreciated.

  I think you're an IDE #1 error message. Am I wrong?
  This error message is displayed due to bad settings master/slave/c-salt.

  The parameters of slim-line CD/DVD players is not editable using a jumper.
  The settings are controlled by the software, and to my knowledge it of not possible to change the settings.
  Therefore, not all CD/DVD drives are compatible!

  Before buy you a portable player, you must contact the authorized service provider and ask that compatible!

  Good bye

• Qosmio G20 - CD/DVD is dead - where to get a new?

  Hello!!!

  I have a Qosmio G20 and my DVD player cd's stopped working!
  I have to search again, but can not find!
  If someone can help me model witch is better to buy to replace!

  Thank you

  According to the News user s manual of your Qosmio laptop comes with Mat * un DVD Super Multi UJ-846.
  The drive can be controlled by Toshiba service provider or you can buy it online.
  This is the easiest part. Replacing the drive can be more complicated and it should be done by authorized personnel.

• Qosmio G20 - CD/DVD drive does not burn

  Please can someone help?
  I rebuilt my qosmio g20 and the thing what it is great except my cd dvd player that plays audio and video but simply will not register.

  When the folder now, he says no. RECORDER and when I click on check for other readers of anything.
  Select record is selected. Before the reconstruction, it all worked but did not.

  I have nero has always worked well even with the sound stuff installed. So I reinstalled nero and nothing.
  I tried to delete the upper and lower entrances in regedit, which is a common difficulty that offered among various forums but nothing again.

  Sick as a parrot, so glad of any help here... Thank you

  Hello

  It's very strange
  Have you tried to reinstall the OS again?
  Try this.

  I recommend also to remove the CD/DVD drive Device Manager, then restart the laptop.
  Usually the operating system should recognize the drive of the CD/DVD device correctly and must reload the driver again.

  I see you are using Nero burning ROM. I know sometimes the BONE can be confusing upward if several burning applications are installed.
  So remove the sonic software and use only one. Nero.

  Best regards

• Qosmio G20 CD/DVD burning is very slow at max 4 x

  I've used philips CD and DVD, but they are slow, burning DVD, but the CD only. can I use another brand of discs as TDK. I can't speed up the record either.

  Is my CARPET * A DVD-RAM UJ-845 s DAMAGED, do I need to replace? I looked on the internet and many people have the same problem with the same drive.

  Hello

  Wait you can burn DVDs but it s not possible to burn the CD?
  OK, it sounds like a hardware malfunction, but before you need to replace the device you should try to burn different CDs. Test the different manufacturers of CD s shape.

  You suggested using TDK?
  I use TDK CD and DVD and my drive burns all successfully.

  Anyway, if you be still not able to burn CDs I guess the lens can not calibrate and that's why the drive can't write to the CD.
  In this case, the disk must be replaced ;(

• Qosmio G20 - CD/DVD drive does not read disks

  Hello world

  I use the G20, which is not able to read DVD/CD other than Moose
  the DVD I burned using the same player is not able to read again when I insert it.

  Can someone help me solve the problem?
  If any other question for the brief ing the question can be posted to will answer.

  Thanks in advance

  Hello

  The problem looks like a compatibility problems between the CD/DVD player and the discs used
  I had this problem several times, but since using the disc TDK R questions is never appeared again.
  So I agree with Luke and recommend that you try other discs.

  In addition you must remove the Upperfilters and Lowerfilters completely from the following registry key values: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Good bye

• Qosmio G20: 1 x recording speed 16 x DVD - R Datasafe

  OK, I normally buy Verbatim and have never had a problem. At lucky on a tub cheap DATASAFE 16 x speed DVD-R and can only write speed 1 x. Manufacturer ID: CMC MAG. AM3.
  The drive is a carpet * a DVD-RAM UJ - 846 Firmware F101, serial number BD027ED1. The date of the firmware is 21/09/05 so almost a year. Of course I don't expect you to write at 16 x speed, but 8 x speed would be fantastic. Qosmio G20 material.

  Yes.
  You should know that not all readers to support all of the media and are not compatible with all CD and DVD.
  As suggested in the above display, you will find tested and compatible media information in the user manual.

• Qosmio G20-139 - Ram upgrade question

  Hi my name is m.k.ash

  My equation on my Qosmio G20-139 PC Ram upgrade
  In prouction specifications said maximum extension 2048MB

  I can upgradeed 4 g or not? or only 2048 max.
  Thank you very much

  Hello

  If the manual indicates that only 2 GB are possible then you can move the RAM only to 2 GB (2 x 1 GB module)

  I thing the laptop supports the Intel 915 PM chipset and it supports 2 GB of RAM.

  See you soon

• Qosmio F30 - CD/DVD player can't read

  Hello
  any body can help me? A few months ago, I upgraded my Qosmio F30-112 from win XP to Win 7 Home premium, it's working prity good everything works fine. A few days ago I tried to play a movie but my Player cannot read the
  I tried to change another disc, but completely impossible to read a DVD disc. I heard the disc inside works, then I'm trying to trouble shoot using the tools DIFFICULTY was the messages:

  Playing and burning CDs, DVDs and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  UT message has been reading and burning CD, DVD and Blu - ray Discs editor details

  Problems found
  The disk in drive [E:] is not detected or is not supportedThe disk in drive [E:] is not detected or is not supported
  The drive is empty, or the format of the disc is not supported. Not fixed
  Insert a CD, DVD or BD completed support

  The player could face a problem player could face a problem
  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn any CDs, DVDs or BDS Detected.
  Potential problems that have been verified
  The drive is a Plug and Play drive of Problemel device has a problem of Plug-and-Play device
  Windows has detected a device with this drive state error and will keep control of problems. There is no question
  A CD, DVD or BD player was not CD, DVD or BD Detecteeun player is not found.
  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected. There is no question
  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device]
  The drive is not accessible without a drive letter assigned. There is no question

  Problems found details

  6 disc in drive [E:] is not detected or is not supported is not fixed

  The drive is empty, or the format of the disc is not supported.
  Insert a CD, DVD or BD completed support

  Invites to insert a CD, DVD or BD supported in the player.

  The player could face a detected problem

  The status of the device is OK. Windows will keep checking for possible problems during the use of optical drives to read or burn CDs, DVDs or BDs.

  Potential problems that have been verified detection details

  The drive has a problem of device Plug-and-Play is no issue

  Windows has detected a device with this drive state error and will keep control of problems.

  A CD, DVD or BD player was not detected issue not present

  Windows does not detect a CD, DVD or BD player. It can be unplugged or disconnected.

  The drive is not assigned a drive letter [MAST * A DVD-RAM UJ-846 ATA Device] question does not exist

  The drive is not accessible without a drive letter assigned.

  Details of detection

  A CD/DVD/BD drive is selected
  IDE\CDROMMAT***A_DVD-RAM_UJ-846S___F103___\5&3796F2E5&0&0.0.0

  The type of inserted media and other information.
  The drive is not recognized by the reader. The disc could be damaged, inserted backwards or have a format not supported.

  Collection information
  Computer name: QOSMIO-PC
  Windows Version: 6.1
  Architecture: x 86
  Time: Sunday, May 30, 2010 20:07:10

  Publisher details

  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Reading and burning CDs, DVDs and Blu - ray discs
  Resolve problems that prevent playback or burning CD, DVD or BDs.
  Package Version: 1.0
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  Hardware and devices
  Use equipment and access devices connected to your computer.
  Package Version: 1.1
  Publisher: Microsoft Corporation
  I tried all these things but I can't solve it, an organization can help me on this things

  Thank you
  rtmasagca

  Hello

  Try to remove the UpperFilters and LowerFilters.

  Here are the instructions:
  http://support.Microsoft.com/kb/982116

• Qosmio G20 recovery process hangs

  Hi everyone, I recently ran the Qosmio G20 recovery DVD and it wiped the hard drive, and when he did the installation program did not continue further. I then decided to launch the installation of Windows Media Center disc and it does not recognize the hard drives, then, I had a look around the internet and found a site that (http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1192841) gave me a drive to run, if you look at the link I ran this method and it didn't work If anyone knows where ive that went wrong, it would be good to know how to fix it.

  Hello

  That your laptop has a RAID?
  In my opinion Yes, there. In this case, you don't need a SATA driver but the RAID driver.

  Please visit this site and download the RAID driver.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• Qosmio G20 156 - code 39 CD player driver problem

  While trying to install a new version of Norton Internet Security, the drive started making a louder than normal noise and then I was told I should I uninstall all previous anti-virus software before continuing.

  After you have uninstalled the previous version of Norton 360, (Mat * un DVD - Ram UJ-846) CD/DVD drive has stopped working.
  No CD/DVD will run; "D:\ refers to a location that is not available" and I get the error message Code 39 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».

  Have tried uninstalling the driver but after resettlement, the same error message.
  Oddly, Itunes released the error message that ITunes is not properly installed and if I want to import/burn CD, I need to reinstall the software.
  I'm really not sure whether if it is a hardware problem software.

  Help, please!

  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/270008/en-us

  You must first remove the CD/DVD drive device manager.
  Then you will need to access the registry and have completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  This will help for sure.

• Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

  I'm a big supporter of Toshiba product.

  Please help me

  Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
  My * DVD UJ-845 s * do not read any CD or DVD.
  Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

  The system to recognize it. The driver is installed and working properly.

  After I installed supports DVDRAM of Toshiba.
  The same thing occurs when playing a CD, the system tells me:

  * E: / not accessible *.
  * incorrectness function *.

  I try with a program on the net but no way.

  I was well able to put the original firmware, but I could not find.
  If someone can do a dump of the original Firmware for me it will be a miracle for me.

  Help, please.
  My great respect.

  I think I can help you:

  Go to my computer right click on the CD/DVD drive.
  Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
  Now click on apply and restart the laptop.

  Check of workaround and post comments

• Qosmio F10 - DVD RAM mast * a UJ - 830 s firmware 1.0

  Hi all.

  My work takes me to travel regularly in several countries and therefore, my DVD drive is running out of parts.
  I thought the point of having a laptop to use it everywhere.
  Well well, not in this case.
  The irony is that it affects only DVD legal copies of inferior quality are region free anyway.
  I have 2 solutions: make the DVD in my final area, or buy disappointing copies.
  A research on carpet * a DVD RAM XX-8XXX came back many messages but no response.
  Change the disc completely work?
  I think that the film industry has completely missed the point, and I gave you a lot of money to get a product that is limited.
  Any idea?

  Hello Chris

  You are absolutely right about the mobility and I agree with you, but the problem is that the laptop manufacturers have no influence on this. Film companies are responsible for this circus. Cell phone manufacturers offer equipment for each region. For the European market, they must offer a driver of DVD that can read the code 2 and so on.

  Qosmio F10 is known to me and on this laptop is not so easy to exchange the ODD. For me it will be stupid to run around the world with laptop and four sides in the bag. What you can do is make your code free WEIRD but it is not legal and without a doubt, you will lose the warranty.

  Sorry, but buddy is a stupid situation. If you want to read interesting comments for this theme please use the search option on this forum and free region as search terms.

  Good luck!