Master of IO card blue LED flashing

Similar Questions

• Back to single drive - blue led flashing for more than 5 hours now

  After trying a second drive, I wanted to go back to your hard drive 1 TB (nhm410) original.

  So I clicked on the "back to the single disk.

  The Web interface gave me 15 minutes to several hours warning. clicked ok and the mht410 restarted (I assume that was the case).

  The LCD screen is out and the powerbutton flashing in blue.

  He does this now for 5 hours.

  Think it's fake. Several hours is 2-3 hours... not 5 or more...

  Is it save to reset the device?

  Don't think it can do anything harmful to the drive as it should also be possible to change the primary hard drive...

  What do you think guys?

  Yes, it should be safe to reset and turn the unit off. Just make sure that you upgrade the firmware again after resetting it.

  Keep we have no progress!

• BlackBerry Smartphones blue LED makes Me crazy!

  Hello and first of a UK based 8820 newbie.

  My BlackBerry is connected via bluetooth to my car hands free kit blue LED flashes constantly which is a bit annoying during the day (it is mounted in a Windows support mounted in my line of sight), but at night, it's just too much. What I can't work is how to disable the blue LED.

  I hope someone can help me otherwise that looks like some black ribbon will be glued on it and I don't want to do that.

  Thanks in advance!

  Neil.

  You can disable the Bluetooth led by going to Options > Bluetooth. Press the Menu key, and select Options. Set the connection seeing on Off option.

  Note: I heard that the setting of this option off can sometimes cause Bluetooth connection problems. So, if your connection has problems after disabling this then try put back on.

• Satellite A200-1UQ will not be on the way, power supply cable LED flashing

  Hello

  My A - 200 satellite 1UQ turns off suddenly when you are connected to the power. Now, he will not be in service.
  When I plug the cable LED (blue) - power cable on the laptop flashes quickly with no difference in speed or make a pause between flashes (so a balanced pace).
  I tried removing the battery and tried another adapter and power cable.

  So my question is: what does the flashing blue LED mean? And, possibly, what can I do to fix this?

  Thanks in advance,

  Matt Bloem

  Hello

  Check it please this Toshiba document as a first step and send a few comments - http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

• The blue led speakers do not work on my new Satellite P100-487

  Hello

  Just bought this laptop and have a little problem. Everything works fine, but I think the blue led next to the speakers should work also.
  I don't know why they are not function...

  Could someone tell me how to light their? Or I'm not able to influence the led?
  I would be very happy if someone could help me quickly...

  Greetings

  Atunc

  Quick response, the blue leds are only available on books with nVidia graphics cards.

• HP Jet 11: 11 flow does not illuminate. Power led flashes 3 x

  I am trying to fix a 11 HP flow for someone and I'm running into some issues here.  Basically, the computer does not light and the power led blinks three times.  I did all the options to reset that I could find online, and the power brick works.  The person said that she may have fallen, so I think this has something to do with that don't turn only not on.  No idea what the three blinking lights could mean in this case?  Thank you.

  Hello

  Flashing codes mean.

  1 blink = CPU does not

  2 flashes

  -L' laptop can load if given enough time.

  -If the laptop starts to load, try to start the BIOS of several times the ESC key until the Start Menu appears. Press the F10 key to enter in BIOS

  > Started the laptop?

  -Yes. The laptop started

  -No, the laptop is not started. At the moment, it seems that the BIOS is damaged.

  3 flashes = Module of Ram error

  4 flashes = failure of the graphics card

  5 flashes = hardware failure

  6 flashes = BIOS authentication failure

  I hope this helps.

• SimpleSave 1 TB Drive Blue LED

  Hello

  I have the SimpleSave 1 TB drive and working with VISTA 64-bit.

  If the computer is proven, the drive blinks all the time with the blue LED.

  It bothers me if I'm sitting on the desk. What kind of error messages if the flashing indicate?

  See the response of support...

  Your computer can send signals to the drive when it is turned off. Try to disconnect the USB cable from the computer to see if the light still flashes. Additionally, make sure that you are not connect the player to a USB hub.

  It is true. On another port, the led does not Flash. Looks like I can on certain ports, even the computer is turned off.

• HP Pavilion m9066 green led flashes

  Hello!

  I have HP Pavilion m6099 and nothing happens when I press on at the power switch. At the back of the power supply the Green led flashes when the power cord is connected. When I take off the motherboad main supply cable stops flashing and led a continuous green light. When I connect MB power cable flashes again begins.

  Can I determine this behavior that PSU is ok and the problem is in the MB, CPU, memory, etc. I tried to remove all of the cards memory one by one, but still flashing continues. I have no tools to test the PSU.

  It flashes continuously, without interruption, etc..

  Do you have any other suggestions how to proceed?

  BR

  Laakspen

  laakspen,

  This is a normal situation. There is a discussion. Read through all of the first page. The discussion involves the diagnosis of the PSU and a hair dryer.

• HP Officejet 6500 a Plus: printer claims to reboot and LED flashing (unusable)

  Hello

  I have a printer problem, which causes the software printer crashing.

  When I run the printer the printer's startup, welcomes me with the menu and after 1 second, he says: problem with downloading, gerts a blue screen with error b814A382 , then it jumps to a screen where it says "turn the printer power on and off" and "Power switch of the device" and all the buttons/LED flash.

  You cannot print, scan, enter menue or anything.

  restart, turn off, unplug the power outlet, does not help.

  I'd be happy to get a tip.

  Kind regards

  Joe

  Hello

  Please click HERE to access the procedure to download and install the printer business.

• Blue light flashing on printer

  I have a HP6700 printer.  The little blue light flashes.  Anyone know what this means?  IHAVE watch and watch and can not find the solution.

  Hi BettyT

  I understand that you would like to know why the blue led will blink.

  When the blue light is solid while the printer is on the wireless network.

  When it flashes, then the printer is not setup on the wireless network.

  Here's a url for the manual for the 6700 Officejey that could be useful. 14 page explains all the icons.

  http://h10032.www1.HP.com/CTG/manual/c03227497.PDF

  I hope this helps.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• Qosmio G20 - Blue LED for the volume does not work on Windows 7

  Hello

  I have a minor problem. Yesterday, I update my Qosmio G20 on 2 GB of RAM and I have install Windows 7. Everything works fine even better than XP, but I notice that my blue led lights for volume no longer works.

  Is there a driver I need to install or any solution that these blue lights for the volume can function again?

  Hi Gabriel,

  I m not Qosmio G20 owner but I m asking you to install Windows 7. I think XP would be the best choice for this portable little plu

  Normally the lighting on Toshiba laptop to install the package of added value. It s is only not for this model, so I put t know if it will work. You should try to download from another model of laptop that is Windows 7 supported.

  In addition also check the BIOS if lighting is enabled.

• Toshiba 22L1334G - green LED flashing and TV does nothing

  Hello, I have a 22L1334G and I had my tv problem is that every time he has cycled from st - by situation is that the first tuning has been activated that he had just bought. Do you want to download the latest version of the software on the web that corresponds to the version V3, 6 3 and now my camera is left with the Green LED flashes and does nothing. Could someone help me.
  A welcome message

  Same problem with 32L1334DG

• HP Envy 5540: blue light flashing

  the printer that is connected directly to the laptop. Works very well. Now, all of a sudden, blue light flashing and will print still but at a snail's pace. What's wrong? Nothing has changed. Paper in the tray.

  Hello @sleuther,

  Thank you for your response.

  I understand that the laptop is connected to the wireless network. It is quite well turn off the wireless feature. Follow the steps and check them out below:

  • In the printer control panel, press on icon (Wireless). Wireless summary appears.
  • Touch icon (settings) and then touch wireless settings.
  • In the wireless settings screen, select "Disabled" for the wireless option.

  Let me know if it helps.

• Satellite M105-S3074 - blue light flashes when the power supply cord plugged

  I have a Satellite M105-S3074 that when I plug in the power cord the blue left flashes just light and unit will not feed. When I unplug it from the laptop all lights go out and it is will not help here please

  Thank you

  Hello

  This means that your mobile doesn t boot with AC/DC adapter and AC/DC adapter too?
  Really strange what s

  Have you tried to remove the battery and the AC adapter? If you remove the two you should an hour and then reconnect the two. Maybe it will work.

  If this isn't the case, it seems to be a hardware problem. You must contact an authorized service provider, you can give them a call to speak to a technician.