Master sync hardware

Similar Questions

• I have the two Master Sync activated WITHOUT be asked for master password said at the start of the session and password?

  The basic question is that whenever I start Firefox, I am invited, a few seconds later, my master password, regardless of if I will actually connect a site for which I saved my credentials.
  This same number as well as a replica of his original poster chosen as the best answer has been published on the following link: https://support.mozilla.org/en-US/questions/1039575

  I'm in the same situation as this poster, but I don't want to turn off sync. I need the master password set to protect my passwords stored, and I need the Sync feature enabled to share my profile between different computers that I use.
  If I close the master password prompt at the start of the session and then I go to a page that I recorded the password, I should I get prompted again, and that's all I need. Also, I've installed Sync do NOT share my passwords stored, where the master password invite so that the effect is useless in my case.

  So the question is simply how can I turn off the prompt for password at startup, have it pop up when you access a site that needs a password stored (or ask if I want to save a) and keep the clock running without sharing passwords.

  Thanks in advance.

  No, this is not possible.
  Sync must retrieve the journal of authentication data in password manager and which requires to enter the password to unlock the password.

  The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.
  The chrome://FirefoxAccounts entry in the Password Manager stores (kA and kB) credentials in JSON format.
  Earlier versions of Firefox used to store these data in the signedInUser.json file in the profile folder, but the current version only stores the sessionToken in this file and must the Manager password for the credentials of the synchronization.

• How it synchronizes work? where is the master sync file?

  When I use sync, where the master synchronization file is? The last two times I used sync, none of my favorites, history etc. have been transferred to the new Firefox. You want a new version of Windows 10. The other was a version of PCLINUX. both are on the same computer. Do I have to import/export instead of synchronization?

  1 sync "synchronizes" all selected data so that it is the same on all devices.

  2. the 'master' file is on the server synchronization, insofar as each device data are sent to the server, where the data is merged. Once each device is connected to the sync server, the data must be the same on each device and the same as on the server.

  3. the export / import will work to transfer bookmarks on a device, adding the existing bookmarks on the device. Do that more than once and you end up with a lot of duplicate bookmarks and folders of bookmarks; Unlike synchronization where bookmarks duplicate as a group.

• The merged clips appear out-of-sync indicators while in sync

  So I have this weird problem with merged clips showing out-of-sync indicators while in fact, the audio is synchronized.

  Let me explain first the workflow for this feature;

  -Set of 6 K RED footage gets converted to 1080 p Prores Proxy

  -All the proxies and separate audio files are imported into a project file 'Master and Sync' (I use it to synchronize and merge clips as well as rename them)

  -When everything is synchronized, merged and renamed, they are placed in their corresponding scene number folder

  -J' I then open my project file 'Edit' and in the media browser, browse to the file "Master and Sync" project.

  -J' have drag and drop clips/merged records newly created the 'Master Sync' in the mediabrowser, in my project 'change '.

  -J' I change with them and everything works as expected.

  The issue comes in when I try to import a sequence edited of my Deputy Editor-in-Chief.

  -We work with the latest version of first

  -We are working on our own systems at home, but both have local access to all the images that we work with.

  -We have a record of sharing creative cloud where our editing projects are located and saved as well as the project "Master and Sync.

  -When my assistant has completed a first Assembly of a scene I navigate to his project to change the media browser when changing my own project is open.

  -J' I find the finished sequence and drag and drop it into my own project to change .

  And at that time there almost every single clip shows the out-of-sync indicator, but when I play the sequence everything is synchronized. I checked with my assistend maybe if its sequence shows also these indicators, but it is not. So it only seems to happen when I import its sequences. I tried ' display indicator out of sync clips unrelated " in the preferences, but without success.

  

  To add a comment to the audio to video synchronization. I had to make up for a lot of audio clips by a 1 or a couple of images manually because they turned with timecode jamming and not gen-lock. It is so true that technically the audio can be out of sync before their merger all but as you can see on the screenshot the indicators show a shift much larger than 1 or two images (I think the max lag that I got was 9 frames).

  All suggestions are welcome and I really hope I'm overlooking something rather than finding a bug!

  Thank you!

  So, I just got a phone call from Adobe. Technology Adobe told me that he had tested this configuration to confirm that it is seeing the same thing I am. Unfortunately, it has been. He also told me that it is a limitation instead of bug. Is because my assistant and I are working on two different systems and no access don't not on the same physical hard disk and so do not have access to the "exact" same media.

  It would be no problem if we worked on different systems, but to access media on the shared storage.

  The shame if this is considered to be a limitation rather than a bug. Seems to me it is repairable but, Hey! I'm just a simple editor and no programmer so it might be more difficult.

• Deploy with fpga after change of chassis.

  Hello

  I'm running a project Veristand 2011 with an NI PXI-8109RT controller, a jury of NI PXI-7852R fpga and analog outputs 5 NI PXI-6733.

  For development, I used a chassis PXI-1000 b.

  Now, I have moved the system to a PXI-1045 chassis, and I can't deploy the project more.

  It gets stuck the "start of the deployment group 1", and after a while, I get a timeout error (-307672).

  The only way I deploy the project is to remove the FPGA of the nivssdf and remove the NI PXI-7852R of the chassis.

  Of course I need to map FPGA, then... why the project will not deploy with it?

  Thank you

  Matteo

  Hello Matteo,.

  The chassis of 1045 (and other PXI chassis with a large number of slots) have several segments of independent PCI bus along the bottom of basket.  By default, triggers are not shared between the segments.

  So, if you want to synchronize all your cards, one solution is to put all cards in the same bus segment.  If this is not possible, you will need to go to MAX and manually map PXI Trig 0 away from your card master sync everywhere for other bus segments.  For more information on how to do this, see the following document:

  Routing see PXI trigger in the bus chassis PXI crossover

  Kind regards

  Devin

• BSOD, c:\windows\system32\drivers\mrxdav.sys error?

  I am a veterinary technician, not a computer tech, so I'm out of my depth on this and need help, because these computers are essential for the work I do.

  I work with two laptops, Dell Latitude D600 (I know, I know - they're old.) New ones have been approved as soon as budget free of the order).  Specifications are the following:

  1.60 Ghz processor; 27 GB hard drive; 599 Mhz, 256 MB of RAM, running Windows XP Pro w/Service Pk 3

  We use one of the cell phones as our main unit and the other is our backup.  About 3 weeks, our main unit suddenly came with the BSOD on boot-up top, with the following error message:

  C:\windows\system32\drivers\mrxdav.sys

  The driver unloaded without cancelling pending operations.

  We had not added anything to the extent of the software or hardware is concerned and had not changed anything except for the addition of new text files through an application that we run.  A opted for our backup laptop and who ran very well for the last few weeks, but now we get the same BSOD and error on this unit as well.  I was able to get the machine backup at startup and function normally after about 100 restarts the other day, and he ran all day with no problems once that it loaded everything.

  How do we get this straightened out? We do not have a computer scientist - just a couple of people who know a little more to turn on a computer/turn off.  I ran a clean-up/management application (I-Obit AdvancedCare) for cleaning the registry errors, etc., but that has not solved the problem.

  The error message indicates an infection, but because you have scanned, it is more likely that the portable master knows hardware problems and/or the operating system is corrupt. If you are Imaging for the second laptop, that explains why you see the same questions about this. Best free now part of budget money.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Start with the RAM and then make the hard drive.

  If good test material, back up your data if necessary and do a clean install of Windows.

  MS - MVP - Elephant Boy computers - don't panic!

• How can I configure an unalterable, through synchronization, master device? I just had 1 computer really mess up 9 other becaue of sync.

  A device driver has been installed on a satellite computer that changed several key areas of Firefox without even a confirmation screen asking if she was okay. One of the things that he has changed has the homepage. 10 computers are sync'd, the homepages of all computers was changed to a questionable search engine (something Babylon). I need a way to have a master device where when something is changed on a computer that is not the master, I wonder if I want to change to occur on all computers. The synchronization is very good for establishing a new computer from scratch here, but not when one of these computers changes something without our knowledge.

  Sorry, that the synchronization service is not a method of making a device the "master" unit The synchronization server is the 'master' and any device with a change in the data will send the change on the server almost immediately. While the other devices on this sync account contact synchronization server these changes will be sent to other devices. Hell, if all your devices are on and Firefox is running, the change may have been sent to all your devices before you realize yet something changed on the 1st device.

  The only way I can think to work around the problem you have encountered is to turn off (loosen this device) in Options > Sync before you make changes to a new PC or install anything again. Sync to have a method of synchronization to keep disabled on Firefox, start, allowing the user to launch the flash sync at will. This preference has been removed last summer (iirc) and now all you can do is to 'untie '.

  IMO, you should file a Bug report on this issue - https://bugzilla.mozilla.org/ - Mozilla services - Sync. Should be some sort of "lock" against specific preferences being modified by malware installed secretly on a PC and that spreads via synchronization of all devices on this sync account.

• CAN grasp the material master Timebase rate returns an error with new hardware OR XNET

  Hi all

  I have a project that communicates on a CAN bus. It has always worked well with a PCI-CAN/2 card, but when I tried to use it in combination with an NI PCI-8512 (NOR-XNET) newly purchased card, it returns the following error:

  "1074388560 error has occurred CAN set material master Timebase Rate.vi

  NI-CAN: (Hex0xBFF621B0) the specified feature has a drawing or model under the NI_CAN which can be made compatible with the hardware, NI - XNET CAN. »

  Yes, I have installed the NOR-XNET for NI-CAN compatibility library.

  The error occurs during the initialization of the RTSI connections for synchronization, that VI is attached.

  I guess that this code is based on an example found in LabView.

  When I remove the BOX: block Set (material master time base rate) property, there is no error and the rest of the application seems to work very well.

  Can someone explain what is / was some timebase setting the internal clock of 10 MHz before connecting a RTSI line for her?

  Are there side effects caused by the elimination of this step?

  Should I still include if I run the application in combination with the old card PCI-CAN/2?

  Thanks in advance.

  Hello Pianne,

  Based on our discussion in class, it seems indeed as part of your existing code is written in a very specific way which is not entirely compatible with the XNET approach.

  Indeed, it would be useful to have 2 separate versions of this init VI (and other CAN-code) of your code and allow you to decide which one to run your top-level application, depending on the setting used.
  A HAL as approach could still be used in this case.

• Gray lines in the address bar, bookmarks and tabs bar. Disabling hardware acceleration solve but then vertical sync does not work in the browser. Solution?

  The drivers are up to date! ATI Radeon HD 5850.

  If there are problems with hardware acceleration off then try disabling OMTC and set this pref to false on the topic: config page.

  • topic: config page: layers.offmainthreadcomposition.enabled = false

• I need to reinstall the LinuxO.S. on the master computer sync, how to protect the data and transfer it to the new facility?

  Simply, I need to reinstall the operating system Linux on the mainframe of FIrefox Sync, changing the distro.

  I would like if it is possible to recreate the same configuration of the hand on the new installation of Firefox without losing any stored data synchronization and always synced all other PCs.

  How can I do?

  Thank you
  Marinerdrums

  Yes, Firefox SYNC keeps your data in Firefox server and copy your system

  To learn more

  • https://support.Mozilla.org/en-us/KB/how-do-i-manage-my-Firefox-sync-account
  • https://support.Mozilla.org/en-us/KB/Firefox-sync-take-your-bookmarks-and-tabs-with-you
  • https://support.Mozilla.org/en-us/KB/how-do-i-set-up-Firefox-sync

• Replace the master VCS counterpart cluster (hardware failure)

  We need to replace a faulty Cisco VCS in a cluster. The peer was the master before failing.

  I if I understand cluster documentation we need to remove the VCs of the cluster and add it back in.

  My question is this will incur any interruption of on-line service on the cluster itself? Must the existing direct VCs or replacement be restarted etc.?

  the cluster is running X7.1

  Thank you

  David

  Hi David,

  No, the cluster will be always operational, just with a less VCS in its composition.

  Obviously, all calls that are active on the VCS that you delete will be affected, but the whole of the activities of the VCS will not (the other but many other you have in the cluster devices will be continuous without any required restart).

  Check out creation of Cluster VCS and service guide for complete instructions.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• A - master fonts do not sync on publish

  I have a site created in Muse - fonts that I used in the header and footer have stopped synchronization when I write the site. The site is www.stmaryredcliffe.co.uk if you compare the headers on different pages, you should be able to see the difference. The strange thing is that the home page is based on the A-master similarly that the other pages and even fonts synchronize on it, but not on the other pages. Can you help me please?

  Hi Rhys,

  I checked out your site and found that the header changes when we click on the menu 'development', as it is bound to a different website that is - http://www.stmaryredcliffedevelopment.com/ and therefore your current site is redirected to a new site.

  So, in order to solve this problem, you will need to design your new site - http://www.stmaryredcliffedevelopment.com/ even header as you have designed it in your www.stmaryredcliffe.co.ukof the site.

• Hardware requirements for CS4 Master Collection

  I gave a proc dual powermac G5 to a group non-profit organizations for the education of children, and I need help to determine if my Adobe CS4 Master Collection installation disks will work on this machine. If so, I would like to join the donation. I was not able to get an answer online to date. Someone at - it a useful entry? Well thank you for your time.

  Hello

  Please visit the following link to learn more about system requirements: system requirements | CS4 Point product

  Kind regards

  Shipti

• Long RepQuoteExample: Replica do not sync with master

  Hello
  
  I extended the example RepQuoteExample (in Java), mainly to work with DBXML and use transactions. This seems to have had the unfortunate side effect that my replica does not synchronize with the master. The journal clearly indicates that updates to the master are the acknowledgment of the replica, but requests to the replica do not return results. Closing the master (Env1) down results in the replica (Env2) to become a master and a reboot later from Env1 results be a replica, I can read my original updates. Repeat this procedure gives similar results for Env2, i.e. updates are not synchronized with Env1. SetTxnNoSync definition (false) did not help.
  
  Log on to master when you add an XML document:
  
  [13061:109000] [5540/3916] MASTER: wait for the acknowledgement of receipt: need 1
  [13061:156000] [5540/4912] MASTER: got ack [1] [3550800] (16) 8092 site
  
  The environment is initialized as follows:
  

       EnvironmentConfig envConfig = new EnvironmentConfig();
          envConfig.setErrorStream(System.err);
          envConfig.setErrorPrefix("someprefix");
          envConfig.setReplicationManagerLocalSite(appConfig.getThisHost());
          for (RepRemoteHost host = appConfig.getFirstOtherHost();
              host != null; host = appConfig.getNextOtherHost()){
              envConfig.replicationManagerAddRemoteSite(
                  host.getAddress(), host.isPeer());
          }
          if (appConfig.totalSites > 0)
              envConfig.setReplicationNumSites(appConfig.totalSites);
          envConfig.setReplicationPriority(appConfig.priority);
          envConfig.setCacheSize(RepConfig.CACHESIZE);
  //        envConfig.setTxnNoSync(true);
          envConfig.setEventHandler(new RepQuoteEventHandler());
          envConfig.setReplicationManagerAckPolicy(appConfig.ackPolicy);
          envConfig.setReplicationRequestMin(20000);
          envConfig.setReplicationRequestMax(500000);
          envConfig.setLockDetectMode(LockDetectMode.DEFAULT);
  //        envConfig.setDsyncDatabases(true);
  //        envConfig.setDsyncLog(true);
  //        envConfig.setDirectDatabaseIO(true);
  //        envConfig.setDirectLogIO(true);
          envConfig.setLogAutoRemove(true);
          envConfig.setAllowCreate(true);
          envConfig.setRunRecovery(true);
          envConfig.setThreaded(true);
          envConfig.setInitializeReplication(true);
          envConfig.setInitializeLocking(true);
          envConfig.setInitializeLogging(true);
          envConfig.setInitializeCache(true);
          envConfig.setTransactional(true);
          envConfig.setVerbose(VerboseConfig.REPLICATION_ELECTION, appConfig.verbose);
          envConfig.setVerbose(VerboseConfig.REPMGR_CONNFAIL, appConfig.verbose);
          envConfig.setVerbose(VerboseConfig.REPMGR_MISC, appConfig.verbose);
          envConfig.setVerbose(VerboseConfig.REPLICATION_LEASE, appConfig.verbose);
          envConfig.setVerbose(VerboseConfig.REPLICATION_TEST, appConfig.verbose);
       try {
            dbenv = new ReqQuoteEnvironment(appConfig.getHome(), envConfig);
            xmlMgr = new XmlManager(dbenv, new XmlManagerConfig());
       } catch (FileNotFoundException e) {
            System.err.println("FileNotFound exception: " + e);
            System.err.println("Ensure that the environment directory is pre-created.");
       }
  
       if (appConfig.bulk)
            dbenv.setReplicationConfig(ReplicationConfig.BULK, true);
  
       dbenv.setReplicationTimeout(ReplicationTimeoutType.HEARTBEAT_SEND,
            5000000);
       dbenv.setReplicationTimeout(ReplicationTimeoutType.HEARTBEAT_MONITOR,
            10000000);
  
       ckpThr = new CheckpointThread(dbenv);
       ckpThr.start();
       dlrThr = new DeadlockResolverThread(dbenv, appConfig);
       dlrThr.start();
       dbenv.replicationManagerStart(3, appConfig.startPolicy);

  Commented lines were attempts to solve my problem. I'm not sure of this as any other information that you need, so I'll save space for now.
  
  Thank you
  Rade
  
  Published by: user13112097 on 20.05.2010 04:46
  
  Published by: user13112097 on 20.05.2010 05:13

  Hello Bay,

  You are right.

  In the Berkeley DB reference Guide, on the page titled "strengthening of".
  replicated applications", it is said:

  For implementation reasons, all replicated databases must reside
  in the directories of data, the value of DB_ENV-> set_data_dir() (or in the)
  Directory default environment, if not using
  DB_ENV-> set_data_dir()), rather than in a subdirectory below the
  specified directory.

  I highly recommend reading the chapter of the replication of the
  Reference guide.

  Alan Bram
  Oracle

• Does does detail form table link/sync or to your master?

  In addition to slide / move, if I manually add a form or a table that corresponds to the detail VO (for example children) to a JSF which already has a master form of VO (parent, for example), how can I synchronize the newly added long-form or table to the master?
  
  I read on a blog when you add master/detail as a table/table, it's on the trigger definition partial on the secondary table to the ID of the main table. If the master is a form, however, I can't understand how this synchronization is performed.
  
  Ideas?

  Yes, code. of a PanelFormLayout