Material X61s interrupt up to 40% of CPU resource

Hello, I have recently updated my hard drive of my x61s a seagate Momentus 7200.3 GForce - 320 GB 7200 RPM 16 MB ST9320421ASG. After that I did a fresh install with Windows XP Professional on the new drive twice! Every time when installation is finished, I'm starting to get an interruption in equipment wired with constantly consume up to 40% of my cpu, resource and cut my half battery life. I tried to disabled the component one after the other in order to locate the problem (what componet sends the interruption). But I found nothing. And the interruption does not start immediately when I boot XP. He sometimes starts later after login or start some programs like opera or Firefox browser. Anyone have an idea about this problem? BTW, I already use the system update to get all my drivers and bios to the old version. Thank you!


Tags: ThinkPad Notebooks

Similar Questions

  • material high interrupt CPU under Windows 2003

    Hi guys,.

    I have several virtual machines running windows 2003 and citrix presentation server 4.5 and I experience interruptions of cpu high on the virtual machine as 30 to 40% of the time cpu, so if the CPU is busy for 20%, it is almost 20% compared to that of the downtime.

    I created a new virtual machine from scratch, tried more vcpus, cloned a physics (I know that this is what may cause, but just to test) and several other things.

    The performance is very erratic, sometimes the graphic bellow is completely red. It must be a problem with a planner to UC or something. Could you guys please give me some advice? Thank you!

    Capture.JPG

    CPU usage increases when a system process requires more time or when several network packets are sent and received. The CPU becomes too busy when the CPU receives too many packets of the switch hardware or when a system process consumes too much time CPU. When one of these functions is using CPU resources, then it will be at the expense of the other, because the CPU is too busy.  For example, if the CPU gets number of packets due to a storm of broadcasting on the network, it is so busy processing all the packages that the other processes in the system do not have access to the resources of the processor.

    Just check if the CPU is busy processing network packets.

    HTH

  • com Apple.SBD drains cpu resources

    Need help please - since the installation of the last update of El Capitan, my CPU resources or memory are drained by the process of "com.apple.sbd".

    I run EtreCheck with the following results:

    EtreCheck version: 2.9.6 (256)

    Report generated 2016-02-23 09:55:47

    Download EtreCheck from http://etrecheck.com

    Time 02:42

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Click [delete] to remove the adware.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    16 GB expandable RAM - [Instructions]

    BANK 0/DIMM0

    OK 8 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 8 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 119

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    DELL E198WFP 1440 x 900 at 60 Hz

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - since the start time: about an hour

    Disc information:

    HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 499,25 go-go (407,74 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS31N)

    USB information:

    Western Digital My Passport 07 has 8 1 TB

    EFI (disk1s1) < not mounted >: 210 MB

    Time Machine-My Passport 2 (disk1s2) / Volumes/Time Machine - my Passport 2: 999.83 GB (479,82 GB free)

    TOSHIBA external USB 3.0 1 TB

    iTunes Tosh (disk2s1) / Volumes/iTunes Tosh: 1.00 TB (799,38 GB free)

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Adware:

    ~/Library/LaunchAgents/com.onlineapplicationnotice.AppNotice.plist

    An adware file found. [Remove]

    Kernel extensions:

    / Applications/MacX Video Converter Pro.app

    com.macxdvd.driver.goodSysAudioCapture [no charge] (1 - SDK 10.10 - 2015-05-15) [Support]

    /Applications/Duet.app

    com.kairos.driver.DuetDisplay [no charge] (1 - 10.11 SDK - 2015-12-22) [Support]

    / Library/Extensions

    [loading] com.karios.driver.DuetDisplay (1 - SDK 10.10 - 2016-01-30) [Support]

    / System/Library/Extensions

    com.Aliph.driver.jstub [no charge] (1.1.2 - SDK 10.7 - 2016-01-30) [Support]

    Launch system officers:

    [loading] 152 tasks Apple

    [operation] 84 tasks Apple

    Launch system demons:

    com.Apple.ifdreader.plist [killed]

    [killed] com.apple.periodic - daily.plist

    com.Apple.wdhelper.plist [killed]

    [loading] 197 tasks Apple

    [operation] 88 tasks Apple

    3 the process killed the lack of RAM

    Launch officers:

    [operation] com.carbonite.launchd.carbonitealerts.plist (2008-09-24) [Support]

    [operation] com.carbonite.launchd.carbonitestatus.plist (2009-09-28) [Support]

    [operation] com.hp.devicemonitor.plist (2012-05-26) [Support]

    [loading] com.hp.messagecenter.launcher.plist (2010-01-19) [Support]

    [operation] com.hp.productresearch.plist (2012-01-16) [Support]

    Launch demons:

    [loading] com.adobe.fpsaud.plist (2016-01-29) [Support]

    [operation] com.carbonite.launchd.carbonitedaemon.plist (2008-07-20) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    User launch officers:

    [operation] com.amazon.music.plist (02 / 02/2016) [Support]

    [loading] com.google.keystone.agent.plist (2016-01-28) [Support]

    [operation] com.onlineapplicationnotice.AppNotice.plist (2016-02-19) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Dropbox application (/ Applications/Dropbox.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    Backup Photos from Google application (/ Applications/Google Photos Backup.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    COPYCLIP application (/ Applications/CopyClip.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    SoundBunny application (/ Applications/SoundBunny.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    Amazon Cloud Drive App Application (/ Applications/Amazon Cloud Drive App.app)

    Other applications:

    [operation] com.amazon.clouddrive (2015-12-03)

    [operation] com.amazon.clouddrive.mac.41632 (2016-02-11)

    [operation] com.apple.xpc.launchd.oneshot.0x1000000b.SoundBunnyHelper (2015-07-28)

    [operation] com.apple.xpc.launchd.oneshot.0x10000010.EtreCheck (2016-02-20)

    [loading] com.fiplab.clipboardhelper (2016-01-20)

    [operation] com.fiplab.copyclip2.44192 (2016-01-20)

    [operation] com.getdropbox.dropbox.44512 (2016-02-19)

    [operation] com.google.gpautobackup.105632 (2016-01-29)

    [operation] com.prosofteng.SoundBunny.8672 (2015-07-28)

    Plug-ins Internet:

    npMotive: 1.0.0 - 10.7 SDK (2015-01-22) [Support]

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-01-28)

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    Default browser: 601 - SDK 10.11 (2016-01-28)

    SharePointBrowserPlugin: 14.6.1 - SDK 10.6 (2016-02-18) [Support]

    AmazonMP3DownloaderPlugin101750: unknown

    PepperFlashPlayer: 20.0.0.306 - SDK 10.6 (2016-02-10) [Support]

    Silverlight: 5.1.41105.0 - SDK 10.6 (2015-12-18) [Support]

    User Plug-ins internet:

    CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

    Safari extensions:

    1 - ClickWeather (2015-01-27)

    MLB.com Toolbar (2015-01-27)

    Audio Plug-ins:

    SoundBunny: 1.1.4 - SDK 10.10 (2015-08-10) [Support]

    3rd party preference panes:

    Carbonite (2013-08-11) [Support]

    Flash Player (2016-01-29) [Support]

    Time Machine:

    Skip system files: No.

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 499,25 GB disc used: 91,51 GB

    Destinations:

    My passport [Local]

    Total size: 999,83 GB

    Total number of backups: 118

    An older backup: 12/09/13, 20:59

    Last backup: 23/02/16, 09:49

    Size of backup drive: adequate

    Backup size 999,83 GB > (disc 91,51 GB X 3)

    Top of page process CPU:

    93% com.apple.sbd (2)

    36% CarboniteDaemon

    32% WindowServer

    20% launchd

    6% kernel_task

    Top of page process of memory:

    1.47 GB kernel_task

    Com.apple.WebKit.WebContent (3) 721 MB

    ITunes 459 MB

    Mds_stores 279 MB

    Mdworker (10) 115 MB

    Virtual memory information:

    6.83 Go free RAM

    9.17 used GB RAM (4.23 GB being cached)

    36 Mo used Swap

    Diagnostic information:

    February 23, 2016, 09:37:12 /Library/Logs/DiagnosticReports/CarboniteDaemon_2016-02-23-093712_[redacted].cp u_resource.diag [details]

    / Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon

    23 February 2016, 08:44:17 test - passed

    February 22, 2016, 16:55:07 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-02-22-165507_ [redacted] .crash

    System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

    February 22, 2016, 08:58:21 /Library/Logs/DiagnosticReports/com.apple.sbd_2016-02-22-085821_[redacted].cpu_ resource.diag [details]

    /System/Library/PrivateFrameworks/CloudServices.Framework/versions/A/XPCService s/com.apple.sbd.xpc/Contents/MacOS/com.apple.sbd

    Thanks for any help provided!

    P.S. I removed the adware, by EtreCheck, restarted and EtreCheck represented with the following results:

    EtreCheck version: 2.9.6 (256)

    Report generated 2016-02-23 10:15:08

    Download EtreCheck from http://etrecheck.com

    Time 06:35

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Computer is too slow

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    16 GB expandable RAM - [Instructions]

    BANK 0/DIMM0

    OK 8 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 8 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 119

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    DELL E198WFP 1440 x 900 at 60 Hz

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - since startup time: less than an hour

    Disc information:

    HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 499,25 (Go 409,95 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS31N)

    USB information:

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Western Digital My Passport 07 has 8 1 TB

    EFI (disk1s1) < not mounted >: 210 MB

    Time Machine-My Passport 2 (disk1s2) / Volumes/Time Machine - my Passport 2: 999.83 GB (479,82 GB free)

    TOSHIBA external USB 3.0 1 TB

    iTunes Tosh (disk2s1) / Volumes/iTunes Tosh: 1.00 TB (799,38 GB free)

    Apple Inc. FaceTime HD camera (built-in)

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Guardian:

    Mac App Store and identified developers

    Kernel extensions:

    / Applications/MacX Video Converter Pro.app

    com.macxdvd.driver.goodSysAudioCapture [no charge] (1 - SDK 10.10 - 2015-05-15) [Support]

    /Applications/Duet.app

    com.kairos.driver.DuetDisplay [no charge] (1 - 10.11 SDK - 2015-12-22) [Support]

    / Library/Extensions

    [loading] com.karios.driver.DuetDisplay (1 - SDK 10.10 - 2016-01-30) [Support]

    / System/Library/Extensions

    com.Aliph.driver.jstub [no charge] (1.1.2 - SDK 10.7 - 2016-01-30) [Support]

    Launch system officers:

    [loading] 157 tasks Apple

    [operation] 79 tasks Apple

    Launch system demons:

    [loading] 193 tasks Apple

    [operation] 95 tasks Apple

    Launch officers:

    com.Carbonite.launchd.carbonitealerts.plist [loading] (2008-09-24), [Support]

    [operation] com.carbonite.launchd.carbonitestatus.plist (2009-09-28) [Support]

    [operation] com.hp.devicemonitor.plist (2012-05-26) [Support]

    [loading] com.hp.messagecenter.launcher.plist (2010-01-19) [Support]

    [operation] com.hp.productresearch.plist (2012-01-16) [Support]

    Launch demons:

    [loading] com.adobe.fpsaud.plist (2016-01-29) [Support]

    [operation] com.carbonite.launchd.carbonitedaemon.plist (2008-07-20) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    User launch officers:

    [operation] com.amazon.music.plist (02 / 02/2016) [Support]

    [loading] com.google.keystone.agent.plist (2016-01-28) [Support]

    Items in user login:

    iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Dropbox application (/ Applications/Dropbox.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    Backup Photos from Google application (/ Applications/Google Photos Backup.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    COPYCLIP application (/ Applications/CopyClip.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    SoundBunny application (/ Applications/SoundBunny.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    SoundBunnyHelper Application (~/Library/Application Support/SoundBunny/SoundBunnyHelper.app)

    Amazon Cloud Drive App Application (/ Applications/Amazon Cloud Drive App.app)

    Other applications:

    [operation] com.amazon.clouddrive (2015-12-03)

    [operation] com.amazon.clouddrive.mac.41632 (2016-02-11)

    [operation] com.apple.xpc.launchd.oneshot.0x10000001.EtreCheck (2016-02-20)

    [operation] com.apple.xpc.launchd.oneshot.0x10000005.SoundBunny (2015-07-28)

    [operation] com.apple.xpc.launchd.oneshot.0x10000007.SoundBunnyHelper (2015-07-28)

    [loading] com.fiplab.clipboardhelper (2016-01-20)

    [operation] com.fiplab.copyclip2.44192 (2016-01-20)

    [operation] com.getdropbox.dropbox.44512 (2016-02-19)

    [operation] com.google.gpautobackup.105632 (2016-01-29)

    [loading] com.prosofteng.SoundBunny.8672 (2015-07-28)

    Plug-ins Internet:

    npMotive: 1.0.0 - 10.7 SDK (2015-01-22) [Support]

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-01-28)

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    Default browser: 601 - SDK 10.11 (2016-01-28)

    SharePointBrowserPlugin: 14.6.1 - SDK 10.6 (2016-02-18) [Support]

    AmazonMP3DownloaderPlugin101750: unknown

    PepperFlashPlayer: 20.0.0.306 - SDK 10.6 (2016-02-10) [Support]

    Silverlight: 5.1.41105.0 - SDK 10.6 (2015-12-18) [Support]

    User Plug-ins internet:

    CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

    Safari extensions:

    1 - ClickWeather (2015-01-27)

    MLB.com Toolbar (2015-01-27)

    Audio Plug-ins:

    SoundBunny: 1.1.4 - SDK 10.10 (2015-08-10) [Support]

    3rd party preference panes:

    Carbonite (2013-08-11) [Support]

    Flash Player (2016-01-29) [Support]

    Time Machine:

    Skip system files: No.

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 499,25 GB disc used: 89,30 GB

    Destinations:

    My passport [Local]

    Total size: 999,83 GB

    Total number of backups: 118

    An older backup: 12/09/13, 20:59

    Last backup: 23/02/16, 09:49

    Size of backup drive: adequate

    Backup size 999,83 GB > (disc 89,30 GB X 3)

    Top of page process CPU:

    98% com.apple.sbd

    36% CarboniteDaemon

    5% mdworker (20)

    5% kernel_task

    2% hidd

    Top of page process of memory:

    1.08 GB kernel_task

    377 MB ocspd

    Mdworker (20) 328 MB

    ITunes 295 MB

    262 MB com.apple.WebKit.WebContent (3)

    Virtual memory information:

    10.00 GB of free RAM

    6.02 used GB RAM (2.51 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    February 23, 2016, 10:12:55 /Library/Logs/DiagnosticReports/com.apple.sbd_2016-02-23-101255_[redacted].cpu_ resource.diag [details]

    /System/Library/PrivateFrameworks/CloudServices.Framework/versions/A/XPCService s/com.apple.sbd.xpc/Contents/MacOS/com.apple.sbd

    February 23, 2016, 10:07:38 /Library/Logs/DiagnosticReports/CarboniteDaemon_2016-02-23-100738_[redacted].cp u_resource.diag [details]

    / Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon

    23 February 2016, 10:04:41 self-test - spent

    February 23, 2016, 09:37:12 /Library/Logs/DiagnosticReports/CarboniteDaemon_2016-02-23-093712_[redacted].cp u_resource.diag [details]

    February 22, 2016, 16:55:07 ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-02-22-165507_ [redacted] .crash

    System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

    February 22, 2016, 08:58:21 /Library/Logs/DiagnosticReports/com.apple.sbd_2016-02-22-085821_[redacted].cpu_ resource.diag [details]

    Once again, thank you for any help.

  • the Task Manager displays only the CPU resource monitor

    Using Ctrl-Alt-Del to bring up the Task Manager appears a little CPU resource monitor.

    .

    Can I fix without reinstalling Windows? Or should I just wait for Windows 8?

    Hello. Try to double-click the gray area (frame) in the resource monitor. Who could return to the version complete.

  • The Antimalware Service executable starts and I consume all CPU resources 70% →→ (El Antimalware Service executable is starts y consume me todos los recursos 70% CPU)

    English
    Hello someone can help me when I connect (Windows 8), takes a long throw, and when I see the programs running in the Task Manager windows observed that "Antimalware Service Executable" defender service, is running and consumes me all my resources machine and CPU 70% 90 MB, the antivirus memory starts and says that it takes security measures would have found viruses I turn to the history of the antivirus and trays of items found, quarantined, are allowed to empty and clean and take measures such as ccleaner, defragment disks and a comprehensive review of the antivirus (I do not detect anything).
    Thank you for all the help you can give me. Thank you
    Español

    Hola alguien me can help cuando inicio sesion (Windows 8), to demora mucho iniciar y cuando veo los programas ejecutandoce in el administrator of tasks seen as 'Antimalware Service Executable"el servicio windows defender, is esta ejecutando y me esta consumiendo todoslos mi Máquina 70% CPU resources y Memoria 90 MB, el antivirus is starts there as esta seguridad por supposedly measures taking a virus found , I've al Historia del antivirus las bandejas Elementos en cuarentena, found there, allowed to encuentran vacias, is volume measures of limpieza como el ccleaner, discos desframentacion y UN completo del antivirus review (not me detecto nada).
    The agradesco toda the colaboracion that I can offer. Gracias

    I'm not a fan of programs like Ccleaner, if they are used in an aggressive manner, they can corrupt a Windows system and cause all sorts of problems.

    How the machine does not start mode safe?

    How to start Windows 8 in Mode safe
    http://www.bleepingcomputer.com/tutorials/start-Windows-8-in-safe-mode/

    See if you can isolate any cause of your problems.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/default.aspx/KB/929135

    I see a lot of recommendations here for programs such as -

    Malwarebytes' Anti-Malware
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntispyware
    http://SUPERAntiSpyware.com/

    If you see that Windows Defender is the problem, because it is integrated with Windows 8, you can try to fix it through the System File Checker tool, or by using the system back restore before any problem.  You can also disable and get another free Anti Virus scan.

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (7 or 8).
    http://support.Microsoft.com/kb/936212/#appliesTo

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
    http://support.Microsoft.com/kb/928228#appliesTo

    You can try other things are.

    Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking / control.  He will tell you immediately if there are any problems with your hard drive.  If she says there are errors then run the scan and let chkdsk to correct them.

    Test with another Windows user in case the current user profile is damaged.

  • Reservation of CPU Resource Pool

    Hello everyone

    I need feedback on pools of resources, and in particular for the CPU share uses.

    I read the "Mastering Vmware vSphere 5.5" and I understand how Vmware works for the share of the CPU.

    I have the a customer who want to buy me a resource pools for this virtual machine management. He will buy vCPU 26 and 64 GB of RAM.

    I know how to set up the RAM, but I did not how to do for the CPU.

    I started by 26 multiples by the clock of the CPU, but the value is higher or lower than 1 ESXi. So I think I made a mistack.

    Can someone help me to understand how do for the CPU resource pool.

    Thanks in advance for your help.

    Best regards

    Matt

    Hi Matt,

    Personally, I put a limit of 2 GHz by heart. CPU host have 3.0 GHz. On this way a big vm as you can 'kill' the host and other virtual machines on it.

    When you use the same limit, you will need to set the limit at 52000 MHz (26 x 2000 MHz Cores).

    Kind regards

    Patrick

  • [Solved] VCenter SQL query eat CPU resources

    Does anyone else have a problem with an SQL query in the database of Vcenter eat lots of CPU resources?

    We noticed that most of the time a core processor is 100% used by the SQL Server, dig deeper, we found that it is always the same query runs over and over again:

    SELECT DISTINCT 
                             VPX_SCSI_LUN.UUID AS lunUuid, CASE VPX_HOST_BUS_ADAPTER.VPX_TYPE WHEN N'vim.host.BlockHba' THEN CAST(VPX_PSA_PATH.HOST_ID AS VARCHAR(255)) 
                             + '-' + VPX_SCSI_LUN.UUID WHEN N'vim.host.ParallelScsiHba' THEN CAST(VPX_PSA_PATH.HOST_ID AS VARCHAR(255)) + '-' + VPX_SCSI_LUN.UUID ELSE VPX_SCSI_LUN.UUID END AS scsiVolumeEntityId, 
                             VPX_DATASTORE.NAME AS datastore, VPXV_DS_LUN_INFO.DATASTORE_ID AS datastoreEntityId
    FROM            VPX_DATASTORE INNER JOIN
                             VPXV_DS_LUN_INFO INNER JOIN
                             VPX_PSA_ADAPTER INNER JOIN
                             VPX_PSA_PATH ON VPX_PSA_ADAPTER.HOST_ID = VPX_PSA_PATH.HOST_ID AND VPX_PSA_ADAPTER.KEY_VAL = VPX_PSA_PATH.ADAPTER_LINK_KEY INNER JOIN
                             VPX_PSA_DEVICE ON VPX_PSA_PATH.LUN_LINK_KEY = VPX_PSA_DEVICE.KEY_VAL AND VPX_PSA_PATH.HOST_ID = VPX_PSA_DEVICE.HOST_ID INNER JOIN
                             VPX_HOST_BUS_ADAPTER ON VPX_PSA_ADAPTER.HOST_ID = VPX_HOST_BUS_ADAPTER.HOST_ID AND VPX_PSA_ADAPTER.LINK_KEY = VPX_HOST_BUS_ADAPTER.KEY_VAL INNER JOIN
                             VPX_SCSI_LUN ON VPX_PSA_DEVICE.HOST_ID = VPX_SCSI_LUN.HOST_ID AND VPX_PSA_DEVICE.LINK_KEY = VPX_SCSI_LUN.KEY_VAL ON VPXV_DS_LUN_INFO.UUID = VPX_SCSI_LUN.UUID AND 
                             VPXV_DS_LUN_INFO.HOST_ID = VPX_PSA_PATH.HOST_ID ON VPX_DATASTORE.ID = VPXV_DS_LUN_INFO.DATASTORE_ID
    WHERE        (VPXV_DS_LUN_INFO.DATASTORE_ID IS NOT NULL)

    sp_who2
    SPID     Status     Login     HostName     BlkBy     DBName     Command     CPUTime     DiskIO     LastBatch     ProgramName     SPID     REQUESTID
    52        RUNNABLE                           NT AUTHORITY\SYSTEM     NIF-VCENTER02       .     nif-vcenter02_vcdb     SELECT               20273570     1436     10/20 12:38:26     Microsoft SQL Server JDBC Driver                   52        0

    Everyone has noticed this problem with Vcenter 5.5 Build 2183111 (update 2) and MSSQL 2012 SP2 + CU2?

    Who like a lot of information storage, perhaps associated refresh "Views of storage" in the vSphere client.

    For the mentioned tables, can you update the statistics on them and see if that helps?

  • script which gives the hostname with more CPU resources and memory available

    Hello

    Anyone have a script which gives the hostname with more CPU resources and memory available in the cluster?

    Concerning

    Vickie

    Hello, VicMware-

    You can get the host with the free CPU, or with the most free memory resources, using the following:

    ## get the host with the most free CPU cyclesGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="CpuMhzFree"; e={$_.CpuTotalMhz - $_.CpuUsageMhz}} | Sort-Object -Property CpuMhzFree -Descending | Select -First 1
    
    ## get the host with the most free memoryGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="MemGBFree"; e={$_.MemoryTotalGB - $_.MemoryUsageGB}} | Sort-Object -Property MemGBFree -Descending | Select -First 1
    

    The first would have produced something like:

    Name          CpuMhzFree
    ----          ----------
    myVMHost0          25384
    

    And the latter didn't would be out:

    Name           MemGBFree
    ----           ---------
    myVMHost4        122.323
    

    .. .or each of these host computers are those with the most free memory/CPU cluster, respectively.  What to do the things for which you are looking?

  • limit of cpu resource manager problem

    Hello world

    I'm testing the resource limit of resource manager. in all the documents I read, after you create groups of consumers, if I gave a resource limit in terms of resources, it is said, this group of consumers won't be able to consume more cpu than that. for ex, 2 consumer group I have one of them gave 90% of cpu and the other (let's call it test_group) 5%, but when I connect with a user who is located in the test_group consumer group. After the execution of some sql/plsql, I noticed that it uses all the cpu.

    EDIT: to the fifth message there is all the code samples and the test results with screenshots.

    for ex in this page: http://pic.dhe.ibm.com/infocenter/mdm/v10r0m0/index.jsp?topic=%2Fcom.ibm.mdmhs.smpl.gd.doc%2Fr_oracle_db_resource_manager_working_example.html

    There is a code example that explain the plan. It is said REPORTING_GROUP is not being able to occupy more than 5% of CPU times in total. I used this code, but reporting_group always be able to consume all the cpu. I tested this code (also I have created a new group and the plan of Enterprise manager) on windows 7 64-bit, intel i7 cpu with 4 core and on the same machine, using the virtual machine oralinux. as database, Enterprise edition 11.2.0.1

    also resources plan is active and working, active session limit or cancel hen size for example, works when I tested it, but CPU limit is not. for testing I used the plsql code.

    create or replace function sf_test(p number) return number as
      x number;
    begin
      select 1 into x from sh.sales where prod_id = p and rownum = 1;
      return 1;
    exception
      when no_data_found then
        return 0;
    end;
    /
    
    
    declare
      x number;
    begin
      for i in 1..50 loop
        for i in 1..10000 loop
          x := sf_Test(i);
        end loop;
      end loop;
    end;
    
    

    I created four session of the Report1 user (in the link I mentioned before) and run this code plsql, at most 5% of cpu if they had but my CPU is overloaded almost every time.

    I missed something here or I got all wrong concept?

    PS: setting resource_limit is true and resouce_plan is the plan that I created. as I said before the plan is active and functional, I know, but may not limit the cpu. I would appreciate it if you help. Thank you very much.

    Looks like the resource manager behave correctly.

    If the session manager are not ask for 95 percent of the CPU resources, what remains will be the users of the report.  Oracle will not starve the UC report sessions if there are a bunch of CPU idle.

    If there are 8 Virtual cores and a bunch of single threaded sessions, you need at least 8 sessions before Manager the Manager could use 95% of the available CPU.  Most likely, you would need 9 or 10.

    If you have only a 6-wire Manager, these discussions could consume at least 6/8 = 75% of the available CPU but probably more than 67% (to pick a number that facilitates the calculation).  There is 33% of the CPU for the report.  There are 4 sessions of report in your screenshot with a little more than 2 cores available and each one seems to spend slightly more than 50% of their time on the CPU, which looks all right.

    Justin

  • Determination of CPU resource advice needed

    Hello-

    Environment = ESXi 4.0

    Group 1 = 13/55 guests invited

    Group 2 = 7/38 guests invited

    Group 1 to 2 pools of resources created, 1 on the resource pools contains 2 guests who constantly suffer from hunger for more of CPU, tips several times a day and stays spiked for 30 minutes.

    Both of the guests are running on CPU 1.  How can I determine if I should add a CPU to the guest or change resource pool settings?

    Currently, the CPU resources in the resource pool settings are:

    Actions: Normal (4000)

    Reservation: 0 MHz

    Expandable reservation is verified

    Limit: 60000 MHz

    Unlimited is not checked.

    The resource pool is home to 13 guests in addition to these 2 who constantly alarm as to who need more CPU (on average between 70000-90000).  The other guests very rarely and if so, spike and then descends, is complaining about needing more.

    My first inclination is to raise the reserve to 80000 however I noticed that the systems are only on a single processor and thought maybe add a second would help more.  The guests are cyclists of the document, so they are sent in batches across the whole of the hundreds / thousands of documents and the Server sorts documents and places them in specific functional areas for the community users.

    Any advice would be greatly appreciated since I was still very green on how work resource Pools.  Thank you in advance.

    I would recommend that you read the Guide of VMware here www resources management. VMware.com/pdf/vsphere4/r40/vsp_40_resource_mgmt.pdf

    It is important to thorougly understand these settings and how it works and limitation is effective.  If you do not know and implemented of resource pool, you will be finished chopping down your foot, but remember that the allocation of the resources of reservation of memory is not shareable and non-recoverable.

    After the great http://frankdenneman.nl/2010/05/Resource-Pools-Memory-reservations/ and explanation.

  • Since the update to 3.1 (Windows XP virtual) CPU resources at 100% all the time

    I had the latest version works perfectly, and since I have updated to version 3.1 my Windows XP SP3 is too slow with 100% of CPU resources during the first 3-5 minutes. After this time, there is a 'system' of the process of the SYSTEM user that starts in almost 40% of resources.

    In summary, the worse performance than the previous version...

    Hello

    It is not quite normal.

    Your description makes me think that there is something wrong with your vmware-tools Setup program.

    I suggest you completely remove the VMware tools, reboot and then re-install vmware tools.

    You can take a snapshot of your VM current before that (and he commit after you complete the procedure)

    --
    Wil
    _____________________________________________________
    VI Toolkit & scripts wiki at http://www.vi-toolkit.com

    Writer to the blog www.planetvm.net

    Twitter: @wilva

  • Thunderbird uses 50% of CPU resource

    Hello
    IMac 24 ", OS10.8, Thunderbird 31.6. I have 3 boxes letters, 1 IMAP and POP 2
    Mailboxes are synchronize every 10 minutes.
    Nothing to Thunderbird asking locally, it uses 50% of CPU. This problem has appeared recently.
    Can you help me to fix it?

    you have an anti virus program. This is the common cause under windows.

  • callservicesd eating all CPU resources

    Hello

    Anyone know the same problem?

    A process call "callservicesd" always take my whole cpu. Even stop it, after a while, he will run again.

    I use MacBook pro 13 retina. 2014 mid, OS X 10.11.3.

    How to solve it? Thank you!

    Please, open the pane Internet accounts in system preferences and disable all Google accounts. The data will remain on Google's servers. See if there is an improvement. If there is, see below.

    Delete Google contact account. Still, you will not be delete anything from Google.

    Scroll to the bottom of the list of the types of accounts (facebook, Linkedin, etc.), and then click Add another account...

    Click on CalDAV account.

    Select Manual from the account Type menu.

    Enter your Gmail address as user name.

    If you have enabled the validation in 2 steps, generate a password specific to the application in your Google account and enter the rather than the connection password you use on the Web site.

    Enter "google.com" (without the quotes) as the server address.

    Click on connect.

    Credit for this solution to BrianBaughn on logicielmac.com.

  • Consumption of CPU resources with several EtherCAT devices

    I use a cRIO 9074 as EtherCAT master and see extremely high CPU usage with only a handful of the deployed devices, nevertheless does not apparently works task from the CPU.

    Installation: I use a simple loop of 100 Hz timed synchronized with the analytical engine that prints a message to the debug console each cycle and samples once CPU usage every 100 cycles. That I added several discs (3rd party engine Copley), I see the CPU load increase as follows:

    Disks / use of the CPU

    0 / 43%

    1 / 67%

    2 / 74%

    3 / 81%

    4 / 89%

    5 / 95%

    6 / 99%

    7 / 100%

    Keeping in mind that I'm not perform a different operation, including the AOP/SDO reads/writes, I would expect much better performance. Reportedly, EtherCAT is able to communicate with dozens of devices at rates of up to 1 khz. Is this a limitation of the controller I use, or I need to run another action for the consumption of resources under control?

    Thank you

    Patrick

    I have discovered a solution to this problem.

    I used digital I/O blocks of read/write, but is not connected to the terminals of the error. When I connected to the terminals of all serial error I see a massive reduction of the CPU and can reach loop rates of > 500 Hz... He also seems to have helped that I removed the foreign software modules which lowers the consumption of resources of reference on the cRIO.

  • Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

    Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

    In addition, the fan works almost all the time that was not the case with Win 8.

    Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

    SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

    I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

    The fan is now more or less normal speed.

    Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

Maybe you are looking for

  • RAM upgradation

    I have HP G62 Notebook PC Product number: XT795PA #ACJ Serial number: [edited by Moderator serial number] OS: Windows 7 Home Basic 64 - bit Service Pack 1 Processor: Intel (r) Core i3 CPU M 370 @ 2.40 GHz motherboard: 1426 54,57 System BIOS: F.37 Gra

  • Formula of currency

    Hello I would create a form of currency to the dollar to sterling. If Column1 is in dollars I column 2 be converted automatically in the correct conversion. Any help much appreciated Subkool

  • Card data scope of device to the TDMS file buffer

    How transfer brought data card device buffer to TDMS file directly bye passing buffers LabVIEW and Windows. In the same way as DAQmx configure logging (VI) do we have any function scope?

  • Need help with the Convolution

    I don't understand exactly what is happening with my convolution. I am trying to convolution my data with one {+ 1, -1} by wavelets, downsample by 2 and convolution again. The problem I have is that if the values of N data go in, he goes out with N +

  • Samsung Note 4: Cannot print to my HPJ4680 to my new phone Galaxy Note 4

    As suggested, I downloaded the App tp my rating 4 ePrint and tried printing on my HP J4680 all-in-One.  Blurtooth is turned on the printer but the print app still says "cannot find the printer. I also got an activation code and activate ePrint, but s