Matrix of pixel intensity, success or failure

Similar Questions

• How to check for in the subsequence has the subsequence success or failure?

  Hello

  I need quick help:

  At the end of the subsequence in cleaning the section I want to check has this subsequence success or failure?

  How to do this?

  K.

  I think you're looking at Rustate.SequenceFailed.

• Could not get the matrix of pixels per 'ImageToArray' VI...

  I have run the 'ImageToArray' example, but you see, I can't get the matrix of pixels in the image.

  could someone help me?

  Thank you very much!

  

  I deal with problems, thank you!

• Custom messages of success and failure on quiz results slide

  I'm trying to create a custom message of success and failure on the quiz results slide, using certain colors in the text caption to reflect the brand of our company. I've added a tip action entering the slide, so that if the percentage of quiz is 80% or more, shows message of success and failure message leathers. It seems like it should work, but for some reason, only the fault message views, no matter if I fail or pass. Anyone tried this with any success?

  Thanks for your help!

  This button is very important: clicking on it will launch the actions that you define in Quiz preferences, success/failure. Think that it is also mentioned in my blog, when I talk about the score slide. Maybe that you were lucky, but I especially advice to add a line short slide after this slide score, certainly everything is transferred correctly, especially when launched by LMS and many users will do the test at the same time (I have used in a college for some exams). In this case you can set the actions of pass/fail on the issue level «Go to next page»

  This thread is marked still unanswered, so I guess it isn't completely resolved?

• I've added Edit > Preferences > Quiz > success or failure > if Grade by the way > to go to the next slide

  Unfortunately, it does not work. The reading frame is rest on the declaration page quiz. Please, can someone tell me what I do wrong?

  Should be a continue button on the Quiz results slide.  The actions of success or failure for the general quiz performed only AFTER that the button is clicked.  If you go to the next slide when they should be at least a slide AFTER the Quiz results slide.

• Replace the legends of success or failure with images.

  Hello
  
  Can I use legends of success and failure for clickboxes or buttons.
  
  Is it possible to display an image of success or failure in place?
  
  Brian

  Hi Brian

  I saw your post earlier today. Unfortunately (actually fortunately in this case) I was unable to answer, because I was in the middle of the realization of a class of Captivate. At that time, I probably would have advised that it is simply not possible.

  Tonight, after reviewing things again and passing through the messages of today, I almost responded again with a resounding no. Then I suspended and figured it out. That thought, was how these subtitles are really just still images. Where the text is superimposed background images. Then, I remembered that when you select the image used for the background of a legend, a choice appears on the list that allows you to navigate to a desired image. So I tested and here's the deal.

  Double-click the legend of feedback
  Select the text that has been provided and delete
  Click the type of legend drop-down and scroll the selection to the end. You should see .
  Select the item and dialogue should appear immediately. It should contain 'Open' in the title bar.
  Note that this dialog box is programmed so that the images in list in. In BMP format. Don't let this discourage you if your image is in a different format. Perhaps. GIF or. JPG. All you need to do is navigate to the location where your image is, and then in the file name field, type *. GIF or *. JPG and press ENTER to display images of this type.
  Click to select your image and click on the OK button.
  Now, your image must be pulled in the slide, but it seems rather odd. This is because it has been extended to the size of the legend. Do not alarm you. All you have to do is to adjust the size so the image seems appropriate. It is enough to click on one of the corner resize handles and try to make the image as small as possible. You will notice that you cannot resize the tiny image what she really is.

  And there you have it!

  Sincerely, I hope that's what you're looking for and it helps out you. Rick

• HP Probook 4520 s memory 8 GB (2x4gb) Corsair pass without success and failure

  OK, here's the story

  My laptop is HP Probook 4520 s

  with Windows Windows 8.1 (6.3) 64-bit (Build 9600)

  Please see the end of this post for CPU - Z report of specs.

  Currently I have 3 GB of memory installed - had to install their return after failed upgrade.

  Please check back the CPU - Z report for the memory module specifications.

  I bought the memory pack 2 x 4 GB Corsair following

  Corsair CMSO8GX3M2A1333C9 8 GB (2x4gb) 1333 MHz DDR3 SODIMM

  http://www.scorptec.com.au/product/memory/SODIMM/43657-CMSO8GX3M2A1333C9

  Plug new modules:

  Lifetime warranty
  Size 8 GB (2 x 4 GB) Kit
  Performance profile none
  Fan included no.
  Heat spreader-
  Configuration memory dual channel
  Type of DDR3 memory
  Package - memory Pin 204
  Package - Format memory SODIMM
  Tested voltage 1.5
  SPD tension 1.5
  PC3-10600 (1333 MHz) memo speed
  SPD speed 1333 MHz
  Tested speed 1333 Mhz
  Tested latency 9-9-9-24
  SPD 9-9-9-24 latency

  When I installed the memory module on the laptop, I couldn't go essentially exceed the stage of the POST. Is the HP logo appears on the screen and what is it... That's all... nothing beyond this point.

  When I went to the BIOS settings, memory read 81xxMB successfully, it is essentially 8 GB of RAM.

  I tried to reset the BIOS settings, has not yet.

  I removed the 2 x 4 GB modules, put back the two original modules of 1 GB and 2 GB - those who came with the laptop-, everything worked again.

  What was not right here... ?

  PS please don't answer not with lame answers "it's weird", "that's strange", I know it's weird and strange. I want clear and specific suggestions.

  Report of CPU - Z below:

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 1.69.0.x64

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 4

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Thread 1 1
  -Core 2
  -0-4 wire
  -Wire 5 1

  Timers
  -------------------------------------------------------------------------

  Timer ACPI 3,580 MHz
  Timer HPET 14,318 MHz
  Timer perf 2,208 MHz
  Sys 1,000 KHz timer
  Timer 133,02 MHz BCLK

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25 Watts
  Basic speed 2527,3 MHz
  Multiplier x Bus 19.0 x 133.0 MHz speed
  2394,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT - x
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Turbo Mode supported, enabled
  2533 MHz Max turbo frequency
  Max-non-Turbo report 17 x
  Max turbo report 19 x
  Rate of return max 9 x
  TDC limited 21 amps
  Basic NT 21 Watts
  Uncore PDT 4 Watts
  Power @ 9 x 7 Watts
  Power @ 10 x 8 Watts
  Power @ 11 x 9 Watts
  Power @ 12 x 11 Watts
  Power @ 13 x 13 Watts
  Power @ 14 x 15 Watts
  Power @ 15 x 18 Watts
  Power @ 16 x 21 Watts
  Power @ 17 x 25 Watts
  Number of bus max 255
  PCI peripheral device connected to the 255 bus, device 2, function 1

  Chipset
  -------------------------------------------------------------------------

  Northbridge Intel Havendale/Clarkdale Host Rev. Bridge. 12
  Southbridge Intel HM57 Rev. 06
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 3 GB
  Double channels (symmetrical)
  Frequency 532,1 MHz memory (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096
  MCHBAR records

  DMI
  -------------------------------------------------------------------------

  DMI BIOS
  vendor Hewlett-Packard
  version 68AZZ version F.0F
  Day 18/02/2011
  ROM size 2560 KB

  System DMI information
  Manufacturer Hewlett-Packard
  product HP ProBook 4520 s
  Unknown version
  series 2CE0211M4C
  UUID {1520830E-6A57-11DF-8C36-42C05900004D}
  SKU WS879EA #ABV
  family 103C_5336AN

  DMI Baseboard
  vendor Hewlett-Packard
  model 1411
  review of KBC Version 57,34
  series 2CE0211M4C

  DMI system box
  Manufacturer Hewlett-Packard
  chassis type Notebook
  2CE0211M4C series chassis

  DMI processor
  Manufacturer Intel(r) Corporation
  model Intel (r) Core i5 CPU M 430 2.27 GHz
  clock speed 2264,0 MHz
  The FSB 133.0 MHz speed
  multiplier x 17.0

  DMI Extension slot
  PCI SLOT1 designation
  type of PCI
  32-bit width
  No. populated

  DMI OEM channels
  String [0] 70/71 79 7 ABS has 7 b 7 c
  v01.4A CSM chain [1]
  chain [2] www.hp.com

  DMI physical memory matrix
  location motherboard
  use system memory
  correction no
  Max 8192 MB capacity
  Max # of devices 2

  DMI memory device
  name high-Slot 1 (top)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  Size 2048 MB

  DMI memory device
  name high-Slot 2 (under)
  format SODIMM
  unknown type
  width total 64-bit
  64-bit data width
  size 1024 MB

  Storage
  -------------------------------------------------------------------------

  Drive 0
  Device path \\?\scsi#disk&ven_&prod_st9320423as#4&1f4bc32b&0&000000#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
  Type set
  Name ST9320423AS
  Capacity GB 298,1
  SMART Support Yes

  USB devices
  -------------------------------------------------------------------------

  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB device USB Composite class = '0xEF' subclass = 0 x 02, seller = 0 x 0461, product = 0x4DB6
  Generic USB hub USB Device class = '0 x 09' subclass = 0 x 00, seller = 0 x 8087, product = 0 x 0020
  Peripheral USB Microsoft mouse and detection (USB) keyboard driver, class = "0x00" subclass = 0 x 00, vendor = 0x045E, product = 0 x 0745

  Graphics
  -------------------------------------------------------------------------

  Number of cards 1

  API chart
  -------------------------------------------------------------------------

  ATI I/O API

  Graphics cards
  -------------------------------------------------------------------------

  Display adapter 0
  Name ATI Mobility Radeon HD 4500 Series (Microsoft Corporation - WDDM v1.1)
  Manufacturer 0x103C (0 x 1411)
  512 MB memory size
  Bus device PCI 1 (0x1), device 0 (0x0), function 0 (0x0)
  Vendor ID 0 x 1002 (0x103C)
  The model 0 ID 9555 x (0 x 1411)
  Performance level 0

  Win32_VideoController AdapterRAM = 0x20000000 (536870912)
  Win32_VideoController DriverVersion = 8.97.10.6
  Win32_VideoController DriverDate = 20/06/2012

  Software
  -------------------------------------------------------------------------

  Windows Version Microsoft Windows 8.1 (6.3) 64-bit (Build 9600)
  Version of DirectX 11.0

  Clear and precise. Your laptop uses the memory of 1.35 volts and that you have installed 1.5 volt.

  This is the crucial page for memory you need:

  http://www.crucial.com/store/listparts.aspx?model=ProBook%204520s

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Display success or failure in report based on the return value

  Hello

  I try to incorporate TestStand to TestComplete by using the ActiveX/COM server adapter  I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete to return a string value (true | false) to TestStand.

  Now I need to get the TestStand report to view 'pass' or 'fail' text for this call sequence, by the return of TestComplete string.

  Is there a place in Expressions or Actions Post I can say and how:

  Returns 'True' = pass

  Returns ' false ' = failure

  Thank you.

  Hello

  (Option 1). Use a string value Test.   The Limits.String would be 'True '.  It would be the easiest because you already channels return of your ActiveX call.   You could do your ActiveX calls a test of a string value.

  (Option 2). Use a step of success/failure.   You can set the string returned in a local variable and then create another step of success/failure that would pass/fail criteria as Locals.StringReturned is 'True '.

  Here are the two options that we hope can help you get started...

  Thank you

  PH

• calculate pixel intensity in an image in black and white

  Hi all

  First of all, im new to labview. Now, this question may have been asked before, but I'm not quite sure. OK, so I have an avi video that can be allocated by 50 images. I used imaq threshold and a loop for to put a threshold in each image, which makes them black and white. What I want to do is to calculate the percentage of area which is highlightened as white. I thought that I can do by calculating the total number of pixels that have an intensity of 1. I know the black pixels are 0 intensity and I also know the total number of pixels in each image. I tried to use the function to quantify but I couldn't get the desired effect. Then, I tried to use imaq light meter, but still I could not the exact number of pixels with an intensity of 1, only the mean value and the standard deviation of the pixel. I can probably calculate the area that is intense using these two values (mean, st.dev) and simple statistics, I think, but I need more detailed results. Is there a way to get the total number of pixels with intensity of 1 in a black and white setting? Sorry if this question has been asked before, I could not find that a related. Sorry for my bad English as well. Waiting for your answers.

  Thank you very much.

  The problemwith gregoryj code is that it converts to a table of Boolean number, not a number, the value of this number depends strongly the position of values in the table that are True.

  Once you have the array of pixels in the black and white image (all the values 1 or 0), just use Array Sum to get the number of 1.

  Lynn

• Get the image pixel intensity vs. wavelength in LABVIEW

  Hi guys,.

  Can you please tell me how can I get a chart of any image intensity vs. wavelength in Labview? I only have the pixels vs intensity chart.

  Thank you very much for your help

  It's not trivial. To pass a hue at a wavelength (assuming you want a kind of precision) you need to calibrate the camera - by measuring the spectral response for a number of known wavelengths.

• Success and failure with Drag 'n Drop

  Drag n Drop works quite well, but I cannot understand how "Display success - failure - index" in this interaction

  Drop n Drag - Actions - I checked the legend of failure that works well. Also cancel and reset buttons work well.

  Impossible to get a button of success who says well done continue.

  The best I've done is 'Success here Type text' box appear in the presentation when you click on the page - to any random combination.

  Anyone had success or advice how to combine the button quiz success in drag n drop?

  appreciate advice

  Captivate 8 (new user)

  Check: advice & glide - Captivate blog

• Drag and drop with audio for the success or failure for each object

  Captivate 7

  I saw Pooja video on at least 20 times, literally, but I can't yet find the complete instructions anywhere. Not even in things, I spent a lot of money on. Ouch.

  

  I want to drag "ed" & "and" and get a snap sound as they settle. I got it work. But when he moves the words in the wrong location, I want a sound alert, allowing them to know that it is a mistake and do not want the box to accept the term.

  Sometimes video of Pooja, but it does not show how. I'm pulling out my hair. Soon it will get ugly around here.

  Sorry for that, I always use advanced actions and sometimes forget (late in the evening) that everyone knows with them.

  If you want to only play an audio clip when an object is moved and don't need a legend to appear or are happy with a legend of single failure (you can check that a new that), you can replace the command execute measures advanced in the screenshot of the other thread in "Play Audio"... »

  

  I've used here a clip audio, available with Captivate in the Gallery\Sounds

  Lilybiri

  PS: Since the CP6 I use the word "container" instead of legend because the text can be inserted, not only in the text captions, but also in the forms (my favorite)

• Message of success or failure only, after Submit form page

  Hello
  
  I have a setup form/report on a table, but I don't want the form creates a branch to the table after the submission. Instead, I want that he stay on the page form and displays a message 'Success' or 'error '. I started by removing the automatic connection has been set in place, but how to display the message of success/fail now me?
  
  
  Thank you

  create a branch to the same page and check the box "include the success of process message."

  If you want you can give the condition of your click on the submit button.

  Thank you
  Tauceef

  Published by: Tauceef on May 11, 2011 21:59

• Quiz results - not only success or failure but several possibilities of result

  I want to develop a quiz where the result is not only pass, or in case of failure, but four different options.

  For example results:

  0-25 points - quiz taker Gets the url/comments 1

  26 - 50 points - quiz taker Gets the url/comments 2

  51 - 75 points - quiz taker Gets the url/comments 3

  76 - 100 points - quiz taker Gets the url/comments 4

  Is this possible with Adobe Presenter Quizmaker, and if so, how?

  Thanks for your help!

  This is not possible in Adobe Presenter, but you should be able to do this with Adobe Captivate by using advanced Actions.

• Master - detail relatively successful and failure!

  Hi all
  I did a master relationship / detail between two data block to aid Assistant of data including property (copy the value of the point) block, he worked successfully at a time and doesn't have a lot of time!
  When I insert a record in the database block value is copied to the block of data in detail, but when I did the same thing for another time value don't copy!
  to resolve this problem, I did a trigger in the detail data block (pre insert):
  : Master.Item - Value: =: detail. Value of the element
  This a successful for the first time and then he didn't!
  I don't know what the problem
  
  Note:
  I have connected to a database on another server PC and working and keep my forms to this PC.
  
  Published by: dev. Men on October 5, 2008 03:54

  Sorry, I said, but it's very strange, you can try

  (1) assistant lunch again

  (2) re - compile FMB