MAX crashes when you try to connect to the remote server in VISA

Similar Questions

• Error message when you try to connect to the remote desktop

  I got a set up for a while - Remote Desktop connection, but yesterday, my power is out, turn off my computer while I was on it.  Now, whenever I try to connect to my remote desktop I get the following error Message: "unable to load the ActiveX control terminal services."  Make sure that c:\windows\system32\mstscax.dll lies in the path"I use Windows Vista.  Any help would be GREATLY appreciated! :)

  Hi Kit_b25,

  Try to run the system ("sfc/scannow" command) File Checker. More info...

  Ramesh Srinivasan, Microsoft MVP

• Error 0 x 80004005 When you try to connect to a remote server

  We have a server everyone in our office who can connect remotely through wifi of office, but a member of the team keeps getting an error 0 x 80004005 When trying to access the server directly. I installed MicrosoftFixit50409, which was supposed to disable IPv6 and he was able to get on the server from the desktop again. Now he is back at the office a few days later, he once more can not access the server. Nobody else has this problem with their computers (a mix of Microsoft 7) and 8.

  When I run diagnostics on the connection error, he returned with the following text: "your computer seems to be configured correctly, but the device or resource (* our company server name *) does not."

  Any suggestions on a permanent difficulty on how I can get this computer to access the company's server without having to reinstall this Fixit program every time that he Vienna? It runs Microsoft 7 and connects to the wifi office, just not the shared server.

  Hi Leslie,.

  Because it is a connection problem, you should contact the forum TechNet, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverfiles#Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc&content=content

  I hope this helps.

• Error when you try to connect to the Essbase Server

  Apply after the patch 13904640 for EE 11.1.2.1 I can't connect with Essbase servers more. When I click on it I get the error message:
  
  Error 0: the database does not accept a connection
  
  
  All services have started without any error.
  
  Anyone know what is happening?
  
  Thank you

  I think it is useful to have a read of the following doc in Oracle Support - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" ' [1469492.1 ID].

  Basically, you will also need to patch the RTC Essbase a.103 so

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• HP 8660 hard crash when you try to set up the network

  So, the strangest thing happened to my all-in-One printer, apparently without me even not touching.

  We have changed our ISP and had to spend our routers/wireless modems in our apartment. It is - of course - our printer drop the connection to the network - no surprise.

  So the big weird thing is, when I now try to establish a connection to our new network, our hardcrashes printer and needs a reboot (ie. on / turn off the) to the same function again.

  When it crashes I get a brief error message VERY (less than one second - white letters on a BSOD background), after which all the LED lights on the printer starts flashing and the screen tells me that the printer must be powered on/off voltage.

  The code (I tried to catch in the less-than-per-second duration is shown) is: B8409490

  When the printer is connected by wire (LAN), everything works like a charm. Using the copy function works fine as well. But since a cable solution is exactly what we were looking for, any input as to what the problem could be is greatly appreciated!

  PS:

  I tried to reset the settings and the use of the factory through the hidden «menu factory» reset Problem persists.

  Hi Diojr,

  Thanks for your reply and information!

  I'm sorry to see that you receive the error message when you try to connect to your network. I see the wired connection works fine. I noticed that you have already tried a factory reset and the same problem persists.

  If you haven't already done so, I suggest updating the firmware, and then try to reconnect to your network (wireless).

  Please let me know how it works for you!

  Click this link for downloading the Firmware update, select first your operating system and then download:

  Officejet Pro 8600 Firmware update

  Good luck

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 6i form is disabled when you try to connect to the DB 11g

  Hi all

  When I try to connect to the local level of database 11g R2 from SQL * PLUS or SQL Developer. But by the form 6i using TNSNAMES connect identifier, shape gives an error and turned off!

  but when connecting to the remote database using the answer TNSNAMES connect identifier that it connects successfully.

  Why? and how to solve?

  Note:

  I formatted the server and reinstall Windows Server 2008 and then reinstall the 6i Forms, but that does not solve the problem!

  Dear Sir

  That we met the same problem to our customer. Follow these steps.

  sqlplus /nolog
  connect / as sysdba
  shutdown immediate
  startup restrict
  alter database character set internal_use UTF8;
  shutdown
  startup
  

  Manu.

• hp officejet 6210 rattling when you try to connect to the laptop

  Trying to connect my hp office jet 6210 to laptop. The printer was initially linked to my computer HP destop, but who is dead and you need to connect the printer to my laptop > when I try to connect to my laptop on receive a clashing of offece jet. I have downloaded the print driver for my laptop, but still no luck. I don't have any original software of the printer as it previously belonged to my father. Any help would be appreciated.

  Hi alisoviejogirl,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you can not install the printer on the laptop and get a clicking sound when you connect the printer to the laptop.

  I'll be happy to help you.

  I have provided a URL how to get to the Device Manager and check the conflicts.

  How to make in the Windows Device Manager? Then click on the link below the identification problems in the Windows Device Manager. You may need to right click to update the driver.

  Check the printer port is using by going to start, devices and printers, right click on the printer, go to the printer properties, select ports tab should be audited on USB.

  If you need more help, please provide the following information.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  What happens when you install the printer software? (error, crashes)

  Show the printer entry in the Device Manager?

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• Receive dns error message when you try to connect to the internet.

  I'm trying to access the internet but I can't and I am connected but whenever I try to open a web page to his not to come but keeps on saying dns server responds not... How to solve this

  I can't access any web page either and I am connected but cannot access web... troubleshooting report indicates that the dns server is not responding.

  Hi sandyrb,

  1. What is the error message when you try to access the internet?
  2. You use Internet explorer to access the internet?
  3. Did you the latest changes on the computer?
  4. What is the type of internet connection you use?
  5. You have security software installed on the computer?
  6. How do you know that the computer is connected to the internet?

  Method 1

  Check if the problem persists in mode safe mode with network mode and post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in the safe mode with network, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then reset TCP/IP on the computer and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  How to troubleshoot connectivity TCP/IP with Windows XP

  http://support.Microsoft.com/kb/314067

• RAS error when you try to connect to the connection broadband cricket how can I solve this

  error message

  Hi r stars.

  To focus in the right direction, we need the following information:

  (a) what is you receive the exact error message?

  (b) if it works well before?

  (c) edition of windows vista you run on the computer?

  Please provide more details about the issue you are experiencing for understand us to better the issue and help you solve this problem.

  Please see the link below

  List of Error Codes may appear when you try to establish a dial-up connection or a VPN connection in Windows Vista

  http://support.Microsoft.com/kb/923944

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to connect to the XP user account, it starts to load then said end the session but don't connect

  When I try to log on my account, he begins to say load my settings personal, but immediately after it is said to end the session once your settings and brings me back to the same screen and I'm stuck. I tried to do this in safe mode and the same thing is happening even with the account admin I also tried using last good known Configuration and not luck. How can I fix it?

  Hey ashok patelTM,.

  1. you remember to make changes to the computer, after which the issue started?

  Try these steps and see if it helps:

  Step 1:

  Unplug all devices (except keyboard and mouse) external connected to the computer and then try to boot to the desktop and check if it helps. Let us know the results.

  Step 2:

  Try the steps from the link to the following article and see if it helps:

  How do I recover from a corrupted registry that prevents Windows XP startup

  I hope this helps.

• WRV200 - "404 not found" when you try to connect to the admin

  After updating the firmware to 1.0.39 - ETSI.img the router is coming fine. (the WRV200 is a European model) The unit seems to work fine. Wireless works with the SSID I set up. My devices can connect to the WLAN using WPA key that I had before.

  BUT: when I try to access the router admin pages returns 404 not found

  Security in my browser is set correctly. I registered a https:// access exception.

  The page that I said:

  404 not found

  File not found.

  Hello!

  Try the following:

  1. check the IP address on the computer. Make sure that your gateway is accessible. You can disable the firewall on the PC as well.

  2 remove THE LAN settings.

  3. use of different browser (e.g. Firefox) will help isolate the problem.

  4. try different computer also.

  5. If still does not work, you can reset the router and reconfigure.

  Thank you!