MAX Database corruption error

Similar Questions

• MAX 14.0 broken and database corrupted after installing the latest drivers of device and LV2014

  I have LV2012 and 2013 (both 32-bit) installed on my system Win8.1 64-bit and you used without problem.  I recently went through the agony of installation LV2014 32 - bit Dev Suite 2014 DS2 and the latest device drivers from the August 2014 DVD, and now MAX (v14.0) does not work.  First of all, it is slow to fill the display of system information, then when I try to develop a tree I get a MAX database connection error (see table) and there is no software listed at all.  Third, devices are not listed correctly even if appearing in Device Manager (eg. a CAN interface is no longer lists CAN0 but shows the device but no configuration, even for devices USB DAQ I(see attached), and I CAN installed 14.0), and there is nothing in the data area.

  The first attempts to install LV2014 were prevented by the mDNS NOR answering machine and without stopping when required by Setup of services.  This also affected attempts to fix the MAX.

  All 3 versions of LabVIEW run OK, but projects include more distance or RIO/FPGA hardware - perhaps because of uninstalled software - but without the list of software to MAX, I can't say what is and is not installed.

  I did a reset Configuration data, fixed MAX several times, uninstalled (all the all dependencies), activated the firewall and antivirus and completely reinstalled LV2012, LV2013, LV2014 and device drivers, but without touching the problem.  I have now lost 2 whole days and I start to desperate for a solution.  Surely this can not be the only case of this in the world.

  Mike

  CLD & Alliance member, UK

  Hi Mike,.

  The link below is what you will need to follow to remove the Corruption of database of MAX. It is a removal tool 'automate' the data removal process. . The second document below are the steps for the traverse removal tool.

  MAX Database Corruption removal tool
  https://decibel.NI.com/content/docs/doc-12805

  What is the process of removing MAX Database Corruption
  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  I highly recommend using the removal tool, as it will do this process for you, you will just need to follow the guests who come to the process.

  Concerning

  Mark

• PS CS4 Extended DB corrupt error message

  When you run the Setup program for PS CS4 Extended, an error message that says that the DB is corrupted, and communicate with Adobe.  I can't find a way to get a specific support on this issue with Adobe.  Ideas?

  Hi drt3684,

  Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html .

  Kind regards

  Romit SInha

• "Database corrupt installation" when installing CS4

  I chatted with online support, and they were not able to help me.

  They asked me fo 'caps' directory, but there isn't. (C:\Program Files\Common Files\Adobe).

  Help, please.

  Hi hammerkp,

  You might want to refer to the following KB Doc: http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html

• my cd/dvd drive is corrupt error code 39. My computer is vista syatem. I can't download any software. Help, please

  Hello please help retorw my Cd / Dvd drive because it is corrupt and the error code is 39. Now, I can not download any software from a disc. What should I do?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/driver-is-missing-or-corrupted-error-code-39-USB/6aeba33e-07fb-446e-9602-2fcc4b8103a9

  It will be useful.

• Format XP Microsoft JET Database Engine error 80004005 unrecognized database would be...-

  XP Microsoft JET Database Engine error '80004005' Unrecognized database format would be... -Is a message I get. Don't know how to fix it?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. He would be grateful if you could answer a few questions to refine the question.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  3. you use ActiveX Data Objects (ADO) or ODBC to connect to a Microsoft Access database?

  4. This error occurs when you run a specific program or out of order?

  5 are logged as administrator?

  "Your question contains all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help. »
   
  See this link for more information on:
   
  http://support.Microsoft.com/kb/555375

  Provide more information about the issue so that we can help you.

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• Database does not start... ALTER database open; change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

  HI during startup of the database of the following errors is. Please help solve the problem.

  SQL > alter database open;

  change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

  ============================================================

  Please see the alerts log entries

  --------------------------------------------------------------------------------------------------------------------------------

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA

  Parameters of the system with default values:

  process = 400

  sessions = 624

  memory_target = 4G

  control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.

  control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  log_archive_format = "ARC%S_%R.%T."

  db_create_file_dest = 'D:\oracle\oradata. '

  db_create_online_log_dest_1 = "D:\oracle\oradata".

  db_create_online_log_dest_2 = "C:\oracle\oradata".

  db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '

  db_recovery_file_dest_size = 8G

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = «»

  dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "

  audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".

  AUDIT_TRAIL = 'DB '.

  db_name = "ATTNDPRD".

  open_cursors = 300

  diagnostic_dest = "D:\APP\ADMINISTRATOR".

  Sun 24 May 13:43:09 2015

  PMON started with pid = 2, OS id = 5792

  Sun 24 May 13:43:09 2015

  VKTM started with pid = 3, OS id = 6500 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  Sun 24 May 13:43:09 2015

  GEN0 started with pid = 4, OS id = 13072

  Sun 24 May 13:43:09 2015

  DIAG started with pid = 5, OS id = 1424

  Sun 24 May 13:43:09 2015

  DBRM started with pid = 6, OS id = 8240

  Sun 24 May 13:43:09 2015

  PSP0 started with pid = 7, OS id = 2980

  Sun 24 May 13:43:09 2015

  DIA0 started with pid = 8, OS id = 12956

  Sun 24 May 13:43:09 2015

  MA started with pid = 9, OS id = 13356

  Sun 24 May 13:43:09 2015

  DBW0 started with pid = 10, OS id = 14248

  Sun 24 May 13:43:09 2015

  DBW1 started with pid = 11, OS id = 17900

  Sun 24 May 13:43:09 2015

  LGWR started with pid = 12, OS id = 5564

  Sun 24 May 13:43:09 2015

  CKPT started with pid = 13, OS id = 16736

  Sun 24 May 13:43:09 2015

  SMON started with pid = 14, OS id = 14068

  Sun 24 May 13:43:09 2015

  RECCE has started with pid = 15, OS id = 16288

  Sun 24 May 13:43:09 2015

  MMON started with pid = 16, OS id = 10884

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  commissioning or shared server 1...

  Environment ORACLE_BASE = D:\app\Administrator

  Sun 24 May 13:43:09 2015

  ALTER DATABASE MOUNT

  Sun 24 May 13:43:09 2015

  MMNL started with pid = 17, OS id = 16128

  Mount of redo thread 1, with mount id 3325657453

  Database mounted in exclusive Mode

  Disabled lost write protect

  Completed: ALTER DATABASE MOUNT

  Sun 24 May 13:43:23 2015

  change the database open

  Sun 24 May 13:43:23 2015

  LGWR: FROM PROCESS ARCH

  Sun 24 May 13:43:23 2015

  Arc0 started with pid = 21, OS id = 10084

  Arc0: Started archiving

  LGWR: FROM PROCESS ARCH COMPLETE

  ARC0: FROM PROCESS ARCH

  Sun 24 May 13:43:24 2015

  Arc1 started with pid = 22, OS id = 18400

  Sun 24 May 13:43:24 2015

  ARC2 started with pid = 23, OS id = 17280

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  Arc1: become the "no SRL" ARCH

  ARC2: Become the heartbeat ARCH

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space

  ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-16038: log 2 # 10343 sequence can be archived

  ORA-19809: limit exceeded for file recovery

  ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"

  ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"

  USER (ospid: 10400): put an end to litigation because of the error 16038

  Sun 24 May 13:43:24 2015

  ARC3 started with pid = 24, OS id = 2188

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:

  ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Instance of stopped by USER, pid = 10400

  --------------------------------------------------------------------------------------------------------------------------

  Regarding

  Ngoyi

  Hello

  Now it works very well... with following

  --------------------------------------------------

  using sqlplus

  • Startup mount
  • ALTER database noarchivelog;
  • ALTER database open;

  -------------------------------------------------------------------------------

  Concerning

  Ngoyi

  -------------------------------------------------

• Is it common to get 'corruption' errors using Winzip for transfer/queue to Compress / decompress VMs?

  When I SCP files vm on W2K3 server via FastSCP, compressed by Winzip, transferring files via Filezilla to another W2K3 server and try to unzip with Winzip... I get "file corrupt" errors Is this common? Is there a more reliable way to compress/transfer computers virtual site to site?

  2.5 U5 vCenter / ESX 3.5 U4 / W2K3 VMs

  All points will be awarded.

  Hello

  No, this is not normal. What version of Winzip are you using?

  IIRC, nothing, until Winzip version 9 (Patchlevel 1?) cannot you create zipfiles to/use more than 2 GB in size.

  Your archives are larger than that?

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

• 8.1.1.5 Siebel database configuration error.

  Hello people,
  
  Any that have faced this error. I am in the middle of Installation, performed the installation of all servers and got into the configuration step. Now with gateway and started the configuration DB.
  
  I'm stuck at one of the stages of the DB Server Setup Wizard to install the new database. It stops at the step after collecting information ODBC & password from the related screens in the wizard.
  
  
  
  SQLTraceAll SQLTraceAll 4 000000034e3c0768:0          No found DNS
  
  GenericLog GenericInfo 3 000000034e3c0768:0      Can not connect to the database.
  00000:
  
  SQLTraceAll SQLTraceAll 4 000000034e3c0768:0          (SQLDisconnect): Conn 290823880, time: 0 s
  
  SQLConnectOptions disconnect 000000034e3c0768:0 4 (SQLDisconnect): Conn 290823880, time: 0 s
  
  GenericError 1 000000034e3c0768:0 GenericLog          Validation failed: C102: the username / password Combination.00000: cannot be validated at this time.
  
  GenericError 1 000000034e3c0768:0 GenericLog          ValidateFailed database password, error: C102: the username / password Combination.00000: cannot be validated at this time.
  
  
  In SQL server, I have created a database called siebeldb and gave enough space and ran grantuser.sql. So that it can start to create the index and table of siebel. I have an ODBC can connect using windows and server for this DB. (90 compatibility mode)
  
  SQL Server mixed mode authentication.
  
  This is a demo env, have some App, DB (SQL Server 2008 R2) on the same machine, running on OS Windows 2008 server 64-bit
  
  Any help is great!
  
  Thank you
  Kumar

  Kumar,

  I did a quick test and got the same errors when you give a name incorrect odbc for db server config wizard:

  SQLTraceAll SQLTraceAll 4 000000034e3c3f5c:0     2011-08-05 14:25:34 found no DNS
  GenericLog GenericInfo 3 000000034e3c3f5c:0     2011-08-05 14:25:34 cannot connect to the database.
  00000:
  SQLTraceAll SQLTraceAll 4 000000034e3c3f5c:0     2011-08-05 14:25:34 (SQLDisconnect) handful of Conn: 300421960, duration: 0s
  SQLConnectOptions disconnect 000000034e3c3f5c:0 4 2011-08-05 14:25:34 (SQLDisconnect) handful of Conn: 300421960, duration: 0s

  Check the odbc name assistant is the name of odbc created in the start menu > administrative tools > Data Sources (ODBC) > tab system DSN.

  As I did this test in windows2003/sql server 2005, you can make sure you are using Microsoft SQL native connectivity Client 9.0 in addition to compatibility mode set to 9 as indicated in the guide of the SRSP:

  http://download.Oracle.com/docs/CD/E11886_01/V8/core/SRSP_81/SRSP_81_DBPlatforms2.html#wp1019620

  Thank you

  Wilson

• during the startup of the database, this error

  Hi guru
  
  yesterday I had this error and I got the solution also, once I get after restarting my machine.
  
  
  

  SQL> alter database open;
  alter database open
  *
  ERROR at line 1:
  ORA-16014: log 2 sequence# 573 not archived, no available destinations
  ORA-00312: online log 2 thread 1:
  'D:\ORACLE\PRODUCT\10.2.0\ORADATA\HRM\REDO02.LOG' {code }
  
  i solve this issue by following command 

  change the database clear no archived logfile Group 2;

  In addition to save or delete the old newspaper archives of the recovery area flash then

  rman target /
  crosscheck archivelog all;
  delete expired archivelog all;
  

• JET '80004005' Microsoft database engine error

  Hello
  
  I hope you can help me solve a situation.
  
  When I try to run a page I get this error.
  
  

  Quote:
  JET '80004005' Microsoft database engine error
  
  Could not use "; file already in use.
  
  / assignment3/resales2.asp, line 9

• Run database query error; Help, please

  I had trouble getting this recording to publish on my DB, I have the same shape, put in place to modify an existing record, as well as the addition of a new record. I have 2 errors, can someone help me see what I'm doing wrong? I write the code that I have a problem with and two errors. I'm sorry, this is probably simple. But I looked at this code too long and miss me the problem.
  
  Code:
  < cfelseif ParameterExists (Form.btnEdit_OK) >
  
  < ParameterExists (Form.RecordID) cfif >
  < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  UPDATE SEEevents
  SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #
  WHERE RecordID = #form. RecordID #.
  < / cfquery >
  < cflocation url = "events_RecordView.cfm? RecordID = #Form.RecordID # ">"
  < cfelse >
  < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  VALUES (' #form.display # "," #form.title # "," # #eDate # "," #form.eventTime # "," #form.location # "," #form.contact # "," #form.phone # "," #form.fax # "," #form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')
  < / cfquery >
  < cflocation url = "events_RecordView.cfm? RecordID = #GetNewRecord.ID_Field # ">"
  < / cfif >
  
  Here are the two errors:
  error when editing an existing record:
  
  Run database query error.
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Too few parameters. 1 expected.
  
  The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 70
  
  68: < cfif ParameterExists (Form.RecordID) >
  69: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "70: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  71: UPDATE SEEevents
  72: SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #
  
  
  
  --------------------------------------------------------------------------------
  
  SQL UPDATE SEEevents SET SEEevents.display = '0', SEEevents.title = 'VIP dinner', SEEevents.eventDate='04/13/2007', SEEevents.eventTime =' 8:30 pm - 23:00 ', SEEevents.location = 'person Restaurant', SEEevents.contact = 'person', SEEevents.phone ='(000) 000.6262', SEEevents.fax = ", SEEevents.email ="[email protected]", SEEevents.URL =' http://www.person.com', SEEevents.sponsor =", SEEevents.Body =' < font size = "2" face = "Verdana, Arial, Helvetica, sans serif" > < strong > Notes: facilities > bookings must be confirmed with a great Cardinal < br > < strong credit > price : < Facilities > Advance: $125. per person (including drinks and tips) at the door: $150. per person, < i > Limited places available < /i > < / police > ' WHERE RecordID = 13
  DATASOURCE ETUCE
  VENDORERRORCODE-3010
  SQLSTATE 07002
  
  This is the error when publishing a new record:
  
  Run database query error.
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.
  
  The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 78
  
  76: < cfelse >
  77: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "78: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  79: INSERT IN SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  80: VALUES ("#form.display #", "#form.title #", "# #eDate #", "#form.eventTime #", "#form.location #", "#form.contact #", "#form.phone #", "#form.fax #", "#form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')
  
  
  
  --------------------------------------------------------------------------------
  
  SQL INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body) VALUES ('0 ', 'test', ' # #03/25/2007 ", 12:47 ', 'Home', 'CJD', '' 000-000-0000,", '[email protected]', 'www.saratogaexpo.com', ' ', ' ')
  DATASOURCE ETUCE
  VENDORERRORCODE-3030
  SQLSTATE 22018
  
  Can someone help me tweek this code? I see double at this stage. Thank you.
  
  Phoenix
  
  

  I thought about it. It's a java tag used by my editor throwing the error in the backup / update of the function.

  Thanks a lot for all the help everyone!
  If I can ever help anyone in any way, feel free to ask.

• Inconsistent database query error

  I get an error for a simple display query. I use MS Access and CF8. The error is as follows:-
  
  Run database query error.
  ''
  
  And to clarify that two single quotes.
  
  The query I use is as follows: -.
  
  SELECT *.
  OF tbl_positionRequest
  WHERE position = ' #URL. Position #'
  ORDER BY Position CAD
  
  He said that the error occurs in the line WHERE.
  The variable is passed correctly, I the debugged in the origin and home page. The funny this is that the output in the debug information is correct when I run it in access and the same query works for another data base (with different domain names).
  
  In CF Admin I use access Unicode driver and I think that might be the problem.
  
  Any help would be appreciated.
  See you soon
  David

  Run the query with just the select and from clauses. Do not display the data, just look at the recordcount. I guess a word reserved with position problem.

• database driver error

  Hi friends,
  When you run a package, see cases like;
  
  
  ORA-20000: pkg_di_calls.open_queue (): ORA-02068: following a serious error of PG4MQC92
  ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=procede02) (PORT = 1522))) (CONNECT_DATA = (SID = pg4mqc92)))
  ORA-06512: at "HCDCNV. PKG_DI_CALLS', line 54
  ORA-06512: at "HCDCNV. PKG_DI_CALLS', line 73
  ORA-06512: at "HCDCNV. PKG_DI_CALLS', line 403
  ORA-06512: at "HCDCNV. PKG_DI_CALLS', line 1445
  ORA-06512: at line 2
  
  Database driver error...
  Function name: ExecuteSP
  
  
  a toad, schema = > packages, we have seen that PKG_DI_CALLS is not valid, recompile, even as invalid.
  
  (I think that the package should be good, it's from the seller)
  
  so the only thing that I think that I may driver problem?
  
  If any friend can show some light?
  
  Thank you very much
  Jerry

  On the host procede02
  check the earpiece of your heterogeneous connection.

  Make sure that the remote database is running. Check the transparent gateway log file.