MAX do not detect the installed PCI devices

Similar Questions

• Qosmio G50 does not detect the connected Bluetooth devices

  The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
  Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

  I did a test to see if it could depend on the PC or the mouse.

  I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
  And the phone does not detect the qosmio via bluetooth.

  What checks can I make on the qosmio while ' I detect devices via bluetooth?

  Tank you

  Hello

  BT has been successfully activated on tis G50?
  Have you used the FN + F8 key secret to switch on the BlueTooth?

  Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

• MAX does not detect the module

  I am part of a team of the FRC and putting in place a Board very easy test to use to test the components.

  I try to use a cDAQ-9171 therefor, with the modules normal FRC - 9201 analog, 9403 for digital and 9472 solenoid.

  When I connect the cDAQ to the computer, MAX detects it and displays it in the tree view on the left. However, when I insert a module (9403), it does not detect it.

  I can do a device simulated, and a simulated inside that module and which works very well. But of course that accomplishes nothing.

  Any ideas? I tried Googling this problem, but I guess that my research skills need work because I found nothing.

  Hi NeatNit

  You're right, DSM is irrelevant in this case.

  I forgot to ask - it's just 9403 module which is not detected or none of them are actually?

  Kind regards

• HP Photosmart 5520 does not detect the installed cartridges

  Hello world

  My operating system is Windows Vista

  The error message for all cartridges installed even when installation and matching color on the printer, it is "the following cartridges appear to be missing.

  This is a new printer and I never got past this stage on this printer.

  Thanks in advance

  Craig Baker

  Hello Craig,.
  
  
  
  I noticed your message on the error message you see on your Photosmart 5520. I'm not sure if you have solved your problem yet, otherwise, I would like to post a link below for you to solve this problem.
  
  
  
  If you are still having the same problem when you have completed the steps, I recommend you call HP Technical Support to inquire about a replacement printer.
  
  
  
  
  
  http://support.HP.com/us-en/document/c03262515
  
  
  
  
  
  Contact information for HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  
  
  
  
  Good luck

• Windows 7 does not detect the GPS Garmin device.

  Original title: the hardware detection.

  I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded new drivers from Garmin website, but nothing helped.  My old machine ran to 64-bit the more recent short 128 bit if it's any help

  My Magellan 5236 T wouldn't connect to Win 7 Premium. Began to look for someone with XP. Duhh!
  And that's this worked on my Compaq Mini Win 7 Starter Edition (in french!).
  Go figure. There are 32 bit vs 64.  It may be useful

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion g6: I get the message "PCI device has not a driver" I don't know what to do.

  EHEN I run the trouble Shooter, I get the message "PCI device has not a driver" I don't know what to do. Can I get a link to load down even. This problem has prompted after a system restore.

  Hello

  Most as it is the PCIe card reader drivers. Please try:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_133237_1 & swEnvOid = 4158

  Otherwise after return what its hardware id.

  Kind regards.

• MAX does not see the devices and interfaces

  Hello

  Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?

  Kind regards

  Kaspar

  Dennis, as usual, is correct.  Please check if you have installed NI-VISA.  There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed.  The link to this article is below.

  http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• NIC is not in the list of devices Win

  Hi all

  I have a Pavillion Elite 9300 Z running Win 7 (64). It is now about 2 1/2 years. I only rarely use it now since I built a more recent/fast PC last year. When I turned on the Pavilion this morning, I discovered that my internet was not
  work. He had been in the past & I have not changed anything.

  Later, after having checked my connections, I found that my NETWORK card is not in the list of devices Win. At this point, I didn't know what to do. So, I tried to 'Add' a new feature, but way of Win 7 wouldn't let me add a device directly, rather it wanted to 'look' for the devices 'detectable '. After more than 15 minutes of searching without results, I abandoned it.

  I decided to install a driver from HP site. Since this is a .exe file, I thought, it will probably work. But, he didn't, even after reboot, still no NETWORK card in Device Manager.

  Can someone help me solve this problem?

  Hi PieLam. If your NETWORK adapter is not displayed in Device Manager, it has very probably been disabled in the BIOS.
  Here is a link showing how to enter the BIOS. Take a look at the screen shot under 'Advanced menu settings' and note the Onboard LAN option. If you have integrated NETWORK interface, then you need to set the "Enabled".
  http://support.HP.com/us-en/document/c01997718

• IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

  I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800.  I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons.  I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device.  The software installed with no problem, but it will not detect the mouse and I can't program the buttons.  On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID).  The mouse works with the basic functionality, but I need to program the buttons

  Hi John,.

  If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.

  For confirmation, this is the link for the latest driver:
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000

  If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Please let us know if you have more queries on Windows.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• SRM 5.1 does not detect the existing unit of vSphere 5.1 independent replication

  Installation guide 5.1 SRM said that RS can operate the vSphere replication stand-alone version:

  " If you installed the stand-alone version of vSphere replication 5.1 then installRS 5.1, all existing twinning and replicas are immediately accessible thanks to the SRM user interface"

  http://pubs.VMware.com/SRM-51/index.jsp?topic=%2Fcom.VMware.SRM.install_config.doc%2FGUID-E8859207-0D9D-414e-8A2A-CEAC0FCA76A3.html

  However, MRS. 5.1 does not detect it.  When I go to the page of replication vSphere in SRM, it seems that if no VR device has been deployed, as if she still wants deploy me them to SRM.

  
  

  How do you get SRM 5.1 to detect the existing VR device and all of its repetitions?  Thank you.

  
  

  Hi Mike,.

  SRM 5.1 requires a separate VRMS and VRS. If you deploy VR 5.1 5.1 SRM and do not use an existing independent RV unit, you always deploy a single device (which contains a VRMS and a VRS) which is ready to use without any additional configuration. MRS allows you to deploy one or more additional VRS for load balancing purposes, but it is completely optional.

  So, normally, it shouldn't matter if you have installed VR 5.1 as stand-alone unit or if you have installed since SRM 5.1. For all purposes, that's exactly the same device. Have you tried you are looking for RV in vSphere Web Client rather than in MRS. interface? If vSphere replication does not appear in the Web Client, then it could be that the VR device is is not registered with vCenter Server or RV service does not, which could be due to a network problem.

  If RV is displayed in the Web Client vSphere then VR runs correctly and the problem is indeed with the connection with MRS.

  Thank you

  Stuart

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.