MAX does not recognize NOR-DAQ traditional (old) devices * HELP

Similar Questions

• NOR-DAQ traditional (old) devices of measurement and automation explore 4.7 with LabView2010 under Windows 7.

  In measurement and Automation Explorer 4.7, with LabView2010 in Windows 7, peripheral OR-DAQ traditional (old) appears under devices and Interfaces and it allows me to create a chassis SCXI-1000, and she agrees "Reset for NOR-traditional DAQ.  However, it does not search the modules in the SCXI1000, and when I ask 'trial', he says 'Impossible to test the chassis at this time.'  The entrance of NOR-DAQmx devices for the SCXI-1000 chassis has no problem and detects the modules very well.  I need the Legacy DAQ to a popular former teaching tool that has no equivalent in NOR-DAQmx.

  Unfortunately, NEITHER-DQA traditional (old) for Windows Vista and 7 functions of the only driver on Windows 7 32-bit, as seen on the page of the driver at the end of paragraph 1 Solution. I recommend you move your program to DAQmx.

• HP 5600 Envy: I had to get a new laptop - it has Windows 7 and does not recognize my HP Envy 5600. Help!

  I just use the indications given on the support forum.  Error message was: "Printer not installed."  Not much to do!  My old laptop fell and broke, I got another one with Windows 7 too.  But it does not recognize my HP Envy 5600.  I have a wireless connection and a WiFi network in my house.  1 thing: it installs it as a scanner, but not a printer.  Please help me - it ' for 3 weeks and I can not print!

  Thanks in advance to anyone who can help you with this!

  Thank you.  In fact, I did a download of the printer driver for the HP Envy 5660 and let him take his time.  It installed perfectly and now I am running, printing, scanning and copying everything on Pinterest to get my house and my world a more beautiful place!  Thank you very much for your help!

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• does not recognize my 7 asus nexus device.

  my computer does not recognize my Nexus 7 Android Tablet Asus when connected.

  trying to transfer photos from the Tablet desktop.

  I have a pc slimline hp3600f with Windows Vista Home Premium OS.

  Is it possible to be able to transfer these pictures?

  Thank you all,.

  pconte2012

  You should try the ASUS VIP forums for your ASUS product queries.

• WMP does not recognize the 3 different portable devices

  I have a new PC Win 7 with WMP. My PC DID recognize 3 different portable devices, when I connect (an iphone a plane mp3 iriver and Sandisk fuze mp3 player.) But WMP does not recognize everything, even if the PC is. I've tried different USB ports on the PC, makes no difference, other than that, all works fine USB ports. And I didn't look at using WMP, which does not seem to realize that this problem can exist, no info at all.

  How to make WMP to recognize so I can sync? And BTW, I'd like to go back to WMP in Vista, I'm bored of advanced tag editor.

  Thank you.

  When you write that the PC recognizes your devices, you got the popup that says that each device has its driver installed and it was ready for use or that you just want to say that you get another indication that the device is connected?

  What WMP version you have (click Help > about Windows Media Player; if you do not see the menu file/View/Play/tools/help, right-click at the top of WMP)?

  In general:

  • The iPhone requires iTunes to synchronize.
  • The mp3 player iRiver must have its firmware updated, which is perhaps not so easy to do (see the device in Device Manager or my computer?) --> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/iriver-ifp890-mp3-cannot-find-driver/c28c30e1-3c9b-4446-b50a-cd884b3cd73e
  • The Sansa Fuze + player MP3 (if that's what you have) requires Windows Media Player 10 or newer.  See also http://kb.sandisk.com/app/answers/detail/a_id/42/session/L3NpZC8qc2g3eHFQag%3D%3D/sno/0 it is apparently quite sensitive to USB cables other than that which was supplied with the product.

• What should I do if my computer does not recognize that there is a device connected media player?

  I have a toshiba laptop and everytime I try to plug in my iPod to download music, Media Player does not recognize that the device is there, to that effect, I can't sync the music on my iPod.

  Hello

  Thanks for posting your question in the Microsoft Community.

  Is it recognized in Windows Explorer?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter to check if it detects anything:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.

• MY HDMI computer does not recognize my TV as audio device

  I have a Samsung (un32f5500ag) TV as monitor, I use with HDMI but I am using speakers separated because my computer does not recognize my TV as a valid speaker, I tried the configuration, I tried to update the drivers, checked outputs from the TV, but when I go to Audio devices, it is not here, I have checked my audio Nvidia also its ok. I don't know what to do, I need my computer to recognize my TV, it only recognizes my TV digital media devices, I need to be the audio device also, could someone help me?

  Hello Adrex,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of incorrect device or audio settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check. Please follow these steps:

  a. click Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'hardware and devices'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Sometimes, we need to manually set the TV to the HDMI connection input. We will have to disable improvements audio speaker. Please follow these steps:

  a. press Windows + X keys , and then click Control Panel.
  b. click hardware and sound , then sound.
  c. on the playback tab, click speakers , and then Properties.
  d. click the enhancements tab, and then click "disable all enhancements" checkbox.
  e. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Hello. I've got 4 Lightroom installed from a dowload bought in June 2013. I've updated my Pc for Windows 10 and now it does not recognize Lr 4. Can anyone help please

  I've got 4 Lightroom installed from a download purchased in June 2013. I've updated my Pc Windows 10 and now it open habit. Any help please

  Then it should work, please go ahead and uninstall and reinstall the application.

• Satellite L750 does not recognize an external microphone

  My laptop does not recognize any external audio input device plugged into the mic port.

  I have a Satellite L750 running Windows 7 with the Conexant HD Audio Smart.

  I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal mic.

  When I go into the sound properties, under the recording tab, it is only the internal mic. There is no option for an external mic.

  I tried updating the driver for sound card, remove the card driver sound and re - install, check all the properties under sound properties, but there is no option for the external microphone.

  I tried Googling the problem but nobody seems to have a viable solution.

  Please can someone help me get the laptop to recognize an external mic.

  > I want to record using external mixer. I am connect the output of the bureau in the 3.5 mm microphone port, but it seems that it is still just using the internal microphone

  Start a test: take an external microphone, connect it to the laptop and use a Windows 7 Audio Recorder utility (can be found in all programs-> Accessories) to record an audio sample.

  Is this possible?

  I think that the microphone that appears in the control-> audio-> recording tab panel is the external microphone jack.
  You can also click right in the recording tab and must mark the options: show disconnected devices and devices to see the disabled.

  By the way: find an old thread you created here on the similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69099
  I advise to use only a single thread to continue the discussions.

• LabView does not recognize my NXT.

  LabView does not recognize my NXT. The small orange window in the lower part
  left corner shows "NXT target not specified." I powered down and back up
  (block the NXT and computer) again after connecting my USB at NXT. The computer is the little jingle when I connect or disconnect both ends of the USB cable.  I have
  tried scanning via Tools/NXT terminal. Pushing scan causes simply one
  image quick to appear and disappear; no 'name', 'connection type' or 'State' appears. They are empty. The help section says that it is 'straightforwrd' and it makes me feel
  LabView will automatically recognize the NXT block that is connected, but this isn't the case. Is there a standard procedure to ensure
  connection-aware in the NXT block by the LabVIEW program? How can I 'specify' my 'target' as it says in the small orange window? (My
  laptop using XP and I tend to use Mozilla firefox...) Thank you!

  Measurement and Automation Explorer (MAX) is another software that we provide. You should have on your computer since you have LabVIEW. If you who open and expand my network, and then expand devices and interfaces, a device USB shows in there? If not, then MAX does not recognize the device, and if this is the case you will not be able to use the device in LabVIEW. If the device is not recognized, make sure that you have the module and the driver for this product.

  Once the unit displays in MAX, you will be able to use in LabVIEW. The module is located here.

  David has.

• HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges

  My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.

  When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902

  The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.

  I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.

  I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?

  Hey @Leathert,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.

  I hope you get your sorted question and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• OfficeJet 4500 - g510g: Installer does not recognize my printer (officejet 4500)

  I don't have the disc if I dl has the HP driver. I am at the end of the process and the installer says that it does not recognize my machine.

  Any help?

  Hello

  The software for your printer is available through Apple Software update, and there is no installer available on HP.com. thjat means that use you a bad driver or a one that is not intended for Yosemite.

  Remove incompatible software using Uninstall HP under Applications > Hewlett-Packard, then follow these steos to install the printer on your Mac:

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G510/3919445/model/3919446

  Kind regards

  Shlomi

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Protector Suite QL does not recognize my old fingers

  Hello users,.

  I have a problem with the Suite of Toshiba QL protective tool. I hope someone can help me. I don't know what I can do to solve this problem.

  I have indexed an important file of me with this tool (Protector Suite QL; with my fingers).
  Unfortunately I did not set a password for the reserve.

  At first my laptop does not recognize my old fingers (I registered 2).
  So I have the idea of removing all the fingers to fix this and decode my key file.

  Now I have the big problem:
  It is not just distort recorded.
  When I try to register my new distort, the laptop want the old fingers of compensation and by activating the fingers again.
  My problem is that it is not just any old fingers because it is not registered. (It was all deleted there)

  I can't put a new skew.
  I don't have a reserve password to decode my file with a password.

  I am powerless, what can I do decode my major key file?

  Can someone give me some advice please?
  I would be very grateful.

  Thank you in advance.

  Kind regards
  Marco

  Hello

  To be honest I don t use Protector Suite and I don t decrypt my files but I know you wouldn't be able to decrypt the encrypted file if your fingerprints have been deleted and you didn't set a password.

  I checked this page upek to find a solution but unfortunately I didn't find a few tips:
  http://www.UPEK.com/solutions/psql/default.asp

  But you can check it out too. Maybe you would be more successful

  Good luck