MAX

Hello, I want to simulate sampling using 8051 and max1284. the program has 0 errors, but then / s no signal on pin DOUT of MAX1284. PLEASE HELP ME! Thank you

$MOD51; This includes 8051 definitions to the assembler in metalink

; Insert your code here.
NOP
NOP
NOP
CLR P1.6
CLR P1.5
;  SETB P1.7
LOOP1:; MOV C, P1.7
; JNC LOOP1
; SETB P1.6
MOV R7, #04 H
CLR HAS
SETB P1.6
NOP
CLR P1.6
NOP
SETB P1.6
NOP
CLR P1.6
NOP
SETB P1.6
NOP
CLR P1.6
LOOP2: SETB P1.6
               
MOV C, P1.7
CLR P1.6
RLC HAS
DJNZ R7, LOOP2
; RLC HAS
MOV B, HAS
MOV R7, 08 H
CLR HAS
LOOP3: SETB P1.6
       
MOV C, P1.7
RLC HAS
CLR P1.6
DJNZ R7, LOOP3
SETB P1.5
MOV 8 P.M., HAS
MOV 21 H, B
RET
END

Hello

The MAX1284 is a single component of page layout. Only components with a blue and black outline can be simulated. Components with green contours cannot.

Hope that answers your question.

Tags: NI Software

Similar Questions

  • MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

    I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB.

    Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through the headphone jack and use a USB for lightning to recharge my iPhone.

    I upgraded to macOS Sierra the day he is released and had no problems until this morning. I unplugged my external screen and speakers and used my laptop for about 15 minutes, the battery, and then returned to my office and plugged my Thunderbolt, rear speakers display in and my CPU shot at 100% and never came back down. My Mac is essentially useless because kernel_task is eating all my CPU and to prevent another asks to enter the CPU.

    I have since audited equipment - everything was fine, reset the NVRAM and I tried to erase IOPlatformPluginFamily.kext .plist files but I couldn't on my Mac (trying to follow this guide, started in Safe Mode and everything then went to try and find the file and my Mac just does not have it). When my external screen is plugged if I'm doing anything CPU intensive (videophone, opening of Chrome, etc.) then my kernel_task gets mad again, and the only way to move is to unplug my screen. Connect my iPhone to charge the tips also my kernel_task as well. I followed my internal temperatures, and nothing was out of the ordinary, to cold currently at about 140 °.

    At this point, it seems that any time that puts something on the charging system and increase the temperature internal internal components of my Mac kernel_task maxes my CPU, which brings my Mac to its knees.

    Any ideas how to fix? Is this just a major bug in 10.12?

    Hi, Trent L.

    Try this - problems with macOS Sierra? This fix can help you.

    He got rid of all my macOS strangeness of the Sierra.

    Hope this helps,

    -BrainSel

  • Time series: finding max and min for each month

    Hello world. I'm working on a datasheet that has collected the data points for all day for the past 15 years.

    A column stores the date and column B contains a numeric value.

    I want to do the following:

    Create a new table (call it table #2) that:

    (1) is now a time series on a monthly basis (column A contains "year month"). This is why the table contains a header and 15 * 12 = 60 rows of data

    (2) B Col contains the Max value of this month.

    (3) C Col contains the value this month min

    Table #2 should be calculated automatically because I need to find these values for several series. Any ideas?

    Here is a way that I came up with

    In the table above, your original data is in columns B and C.

    I've added three additional columns (A, D and E):

    D2 = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

    It's shorthand dethrone select D2, and type (or copy and paste it here) the formula:

    = Year (B2) & NUMTOBASE (MONTH (B2), 10, 2)

    E2 = IF (D1≠D2, 0, E1 + 1).

    Select copy of D2 to E2,

    Select cells D2 at the end of column E, block

    A2 = D2 & NUMTOBASE (E2, 10, 2)

    Select A2, copy

    Select A2 at the end of the A2 column, paste

    now create a second table summary as shown:

    For 'Summary Table 2016:

    the first four lines are the lines of header

    There are 35 total lines

    Enter the year in cell B1

    A5 = −4 LINE)

    B5 = SIERREUR (VLOOKUP ($B$ 1 & NUMTOBASE(B$4,10,2) & NUMTOBASE($A5,10,2), data: $A:$ C, 3, 0), "")

    Select cell B5, copy

    Select cells B5 at the end of row 5, dough

    Select A5 thru M5, copy

    Select cell A5 at the end of the M column, paste

    B2 = MIN (B)

    B3 = MAX (B)

    Select the cells B2 to B2, copy

    Select the cells B2 through M3, dough

    now duplicate the table and change the year to 2015 for the next year.

    You can duplicate this table as necessary to summarize a year

  • power max

    Hello

    No one knows what is the max power by:

    1. a core of mac pro 8 (early 2008) when working at full capacity? That is to say all 4 disks + gf 8000 gt graphics card

    2. Ditto for iMac 21.5 inch clocked at 1.6 Ghz dual core i5, intel graphics hd 6000

    3 and 2.8 Ghz quad core intel i5, iris intel graphics pro 6200

    I need to buy a UPS and need to have this info. Surprisingly enough support tech didn't have this info.

    Thank you

    A standard from the factory Mac Pro (or other model) would have a use power max figure that could be given, but as soon as the user make a change for example, adding a hard drive additional or larger, this figure will change.

    It doesn't help much, but here's the official specs for your model of Mac Pro

    Electrical and environmental requirements

    • ENERGY STAR configurations suffisantes6
    • Voltage: 100-120 v AC or 200-240 VAC (input voltage range)
    • Frequency: 50 Hz to 60 Hz single-phase
    • Current: Maximum of 12A (range low voltage) or 6a (range high voltage)

    For what its worth that classic Mac Pro models have a 980 watt power meaning that is the absolute maximum, he can deliver if fully loaded.

    If you want specific numbers depending on your configuration and use then the best option is to get a socket which allows to measure actual usage. Some examples of such devices.

    https://www.Amazon.com/P3-international-P4460-electricity-monitor/DP/B000RGF29Q/

    http://www.Belkin.com/us/F7C029-Belkin/p/P-F7C029/

  • Export of difference JPG high or Max JPG?

    I noticed, as others before me, that quality JPG exported files are much smaller than the MAX quality JPG files exported. Can someone explain the differences? I did some tests and to the naked eye (mine) images do not look so different on the screen (retina). But MAX exports are often almost twice as HIGH exports.

    What is happening with this?

    Obviously, the difference will be apparent at higher magnifications.

    All that is good enough for your export venture, but maintain the original file at its original resolution. You never know what you might need in the future quality.

  • How to find a mini/MAXI according to specific criteria

    I need to find the low/over highest number in a given list, but according to a variable. For example:

    How removed many/most cars sold to someone in the role of sales? Just the number here.

    * Bonus: in a separate cell, generate the name of the sales person that has the most sold cars.

    MacBook Pro 15 retina

    El Capitan

    3.6.2 numbers

    Thanks for the help.

    Maybe it will work for you:

    Make sure that the first line is a header

    Add additional columns as illustrated titled "sales", "Finance" and "Manager".

    D2 = IF ($B2 = D$ 1, $C2, "")

    It's shorthand dethrone select cell D2 and type (or copy and paste it here) the formula:

    = IF($B2=D$1,$C2, "")

    Select cell D2, copy

    Select cells D2 the F6, paste

    now created the table of Stats as shown, with the first row, a header row

    B2 = if (counta (a2) > 0, MAX (OFFSET (table 3: $D$ 1, 0, MATCH ($A2, table $1 3::D: F$ 1.0) −1, LINES (table 3::D), 1)), "")

    C2 = if (counta (a2), OFFSET (table 3: $A$ 1, MATCH (B2, OFFSET (table 3: $D$ 1, 0, MATCH ($A2, table $1 3::D: F$ 1.0) −1, LINES (table 3::D), 1), 0) −1, 0), "")

    Select the cells B2 C2, copy

    Select the cells B2 at the end of the C column, paste

  • Images are the scale is no longer with (img {max-width: 100% ;}) css from the 34.0.5 in firefox update, it still works fine in IE and chrome.})

    My site was working fine up until firefox updated 34.0.5. Now the images will not scale to fit the box more. I use flexbox so that the site is changing to adapt to the size of the browser. In css, I set img {max-width: 100% ;} and this would make the jpg file size automatically to fit the area they were in, but no more than Mozilla really screwed up this with updated 34.0.5.} My site still works fine with IE and Chrome, but 70% of my web traffic using firefox so I would really like this to work in firefox.
    Any help is greatly appreciated!

    I work by setting a special parameter in CSS for the images that I needed to scale and then I have it referenced by SPAN for each img in HTML, not quite how I wanted it to work since now images filling the box even with monitors really big format, which means that they could now be blurred on a 4 k monitor but firefox left me no choice. Looks like I have going to aid in future chrome like firefox really shit the bed on this 34.0.5 updated

  • Problems with the new Macbook pro 15' maxed out

    Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

    Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

    Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

    I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

    The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

    I would like to continue using it for a while.

    You can try to reset the SMC http://support.apple.com/kb/ht3964

  • I have version 29.0.1 and frequently the top right three boxes (min, max, quit) are missing. How should I do?

    Since the installation of version 29, I had this problem where the three boxes are missing. It happens sometimes that I start FireFox. I can right-click in the min, max or closing of FireFox and area. I never had the problem before. I have an i7 processor and on Windows 7.

    The boxes are not visible (i.e., they show a ToolTip if you hover and work if the click in this area) or whatever should not happen at all?

    You can check the problems caused by a corrupt localstore.rdf file.

    You can check for problems with preferences.

    Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • Network.http.Max - connections by-server not found in 27 FF

    Tried searching Network.http.Max - connections-per-server in the subject: config. This has been deleted?

    See:

  • HTML5 enter a model number and attributes of the Min/Max

    Hello, I was wondering if anyone knows if Firefox will never in support of < Input type = "number" min = "1" max = "99" >.

    28 Firefox will have this, see "browser compatibility":

  • clear the cookies and Max automatically

    On my desktop PC which is hoooked to my TV, I have an option to automatically delete cookies and Max closing FF, but on this laptop that option disappeared. I installed FF only a few months back, while it is on my desk for years. This option is now extirpated from new versions?

    This is what is displayed under the protection of personal information:

    http://oi42.Tinypic.com/oksn13.jpg

    When you choose "Remember history never" then Firefox puts your entire session in private browsing mode. That does not permanently keep cookies between sessions, but I'm not sure the cache. (Logically, that must not be kept either.)

    If you want to choose what to save, change the dropdown to "never remember history" to "Use the custom settings for history" and uncheck "always use private browsing mode. Then, you can manage your shutdown options individually.

  • Firefox maxing out connection to 173.194.28.48 on its own

    I tried to understand what uses a lot of data over the last two months. He had a little used while we were out today. Summer look at resource monitor a little and I saw just Firefox start maxing out the connection to the Google IP 173.194.28.48 steadily just sitting there with a tab open. Did anyone know what Addon or the function would be to communicate with that IP?

    He seems not to have been NoScript, use caps for removing.

  • Max RAM for Mac mini?

    Mac mini (end of 2012), El Capitan 10.11.4

    When it was disclosed that apple sheet says that 16 GB is the max that can be installed. For some models of these peak numbers are simply what was then available for purchase.

    What is the practical maximum that can be installed with the memory modules larger capacity of today to live and will be used in OS X?

    On the Mac, 16 GB.

    (142519)

  • Maxing out CPU with Google Image search, some other sites

    When I try to use Google Image search or load items of SBNation, the Firefox maxes CPU usage site and it stops responding during 10 seconds before it has loaded everything. It is a new problem that has arisen in recent weeks.

    I tried to disable all addons and plugins, deleting the cookies, clear cache, downgraded version beta at 23 and none seem to make no difference.

    Hello

    Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

    You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Then perform the following steps:

    • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
    • In the Firefox options window, click the Advanced tab, and then select 'General '.
    • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
    • Now restart Firefox and see if the problems persist.

    In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

    This solve your problems? Please report to us!

    Thank you.

  • 4M0T/1/40000003: gas exhaust-6407 fan max speed

    Hi, my Mac Mini 2012 (i7 2.3) it starts to make a noise. Ran some tests and the fan seems to run to 6500rmp. Whenever I power, the fan starts at max speed. After 10 or 15 minutes of use, the fan calms down.

    Any ideas how can I solve this problem?

    Thank you in advance!

    This "4M0T/1/40000003: gas exhaust-6407" indicates a hardware problem with the fan motor.

    Maybe a bad electrical connection with the connection with the logic board or maybe the fan needs to be replaced.

    -Make an appointment at an Apple store Genius Bar. Diagnostics are free

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

Maybe you are looking for

  • FVS318N connection problem

    I wonder if anyone who met the situation where a FVS318N rejects all connection attempts despite usernames and passwords entered are correct. Whenever I try to connect, I get the following error: Provided username is not part of the Administrator/com

  • Web application of timesheet before the user log on to the domain network

    We have Windows 2003 server where active directory is installed and used as a domain controller, we also have another server where our web timesheet application developed in .net is installed. What we would like to do is before any user logs on his c

  • Printer/scanner Epson TX110 cannot install the printer driver

    Control Panel - Add/Remove programs. Details of the printer is displayed. Control Panel - printer and faxes - no icon printer not suggesting no driver in place. Reinstall using CD product a step only, that is, agree to the terms. Conversations with E

  • McAfee error code when I don't have Mcafee?

    I tried to download and install ZoneAlarm.  I get a msg that TMP has stopped working.  "GLB4D55. TMP '.  then windows looking for a solution and tells me that I must go to McAfee and discover why ceased.  I don't have McAfee.Anyone know why this is h

  • G6 1201tx laptop computer screen cable

    Hi, I need to know its price in India. I don't know problem, it's in his cable. It's pink screen projection. I am connected with external monitor and it works normally. The name of my laptop is HP Pavilion G6-1201tx... I don't really know if the vide