May not support itunes on my pc can any body tell me why

a before, but not itunes could not sync to iphone.

Hi Gary,.

What happens when you download iTunes? You receive messages or error codes?

You can view the following Apple support link and try the steps to solve the problem.

Problem installing iTunes or QuickTime for Windows

Tags: Windows

Similar Questions

  • How can I get Nitro PC installed properly, so it does not say that he may not support a file or a codec required that it blocks and other problems.

    How can I get Nitro PC installed properly, so it does not say that he may not support a file or the required codec, which it does in Windows Media Player, everything seems to go through there and Nitro prevents me from opening photos or electronic-mail/transfer their. Also, what are the appropriate programs to run files in the documents library and photos. recently, I lost all my documents, the files are there but now empty. It happened a little while before had spoken, by buying the GoFlex Seagate plug of iYogi I was stupid enough to buy their storys. Now that I told them that I used to pay $ 400 to renew my contract, which has more than a year and a half left in this regard that they were still treat me worse than ever. I even bought a program that is supposed to protect your bank account, but only have a debit card which they protect not only credit cards, it was not even mentioned in the contract or the sales pitch. The Seagate GoFlex is sitting here unplugged after that they could not challenge or whatever it is to recover after at least 4 attempts. Brief this cowboy got scalped, but if I can get the Nitro to block all my stuff I would be off to a good start to correct things. Also, I had a printer that was supposed to be a fax with all sorts of other gadgets they had me plug with a wire and wireless and never had to use the fax once and continue receiving invalid messages when I try to put in place something like snapfish, which seems to be an automatic link to my set of requirements. I'm lost.

    Maybe their support/forums?

    http://support.nitropdf.com/home

  • Windows Installer error - hardwaree to the computer may not support booting to this disk.

    I need to reinstall Windows 7 in preparation for upgrade to Windows 10

    I use the Bootcamp Assistant to install Windows 7 and have the following problem.

    1. I partition my SSD 512 drivce, creation of a score of 91 GB for Windows. The partition is created successfully and the MacBook restarts on the Windows Setup disc.

    2, I select my BootCamp (91GB) partition

    3. I then click on "player (Advanced) Option, and then click format.

    4. I then get the following error:

    "Windows cannot be installed to this disk. This computer's hardware may not support booting to

    This disc. Make sure that the drive controller is enabled in the computer's BIOS menu.

    What can I do to solve this problem, so Windows thinks he can boot from this partition?

    Please disconnect all external storage devices, USB hubs and external devices. Run the following two procedures, then try again to BCA.

    Reset the management system (SCM) controller on your Mac - Apple Support

    How to reset the NVRAM on your Mac - Apple Support

  • RAID 0 for a RAID configuration not "this computer's hardware may not supported booting from this drive.

    I want to install a new HARD drive in a tower of the mine to a friend. It was initially created as a RAID 0 configuration with two 160 GB HDD. The replacement is a single 1 TB of HARD drive. I get the message "this computer's hardware may not supported booting to this disk.» Am I missing an approach from a RAID 0 for a RAID configuration, no?

    Hi RegularPencils,

    I suggest that you check in the basic input/output system (BIOS), if you find an option to disable the RAID. If you find, disable the RAID and try to install Windows vista, check if it helps.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Error message when you try to install Windows Vista on a computer that contains multiple RAW hard disks: "Windows cannot find a system volume that meets its criteria for installation.

    http://support.Microsoft.com/kb/933925

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • This computer's hardware may not support booting to this disk

    I get the error message "this computer's hardware may not support booting to this disk" when you try to install Windows Vista on a Western Digital Scorpio 640 Gb SATA hard drive in my laptop Q320.  The laptop works very well with WD Scorpio 320 GB hard drives.  I formatted the disk in the installation procedure and use Diskpart to create a partition/format etc, but still no luck.  I have only one disk in the machine.  Can someone advise. Thank you

    Are you sure you are using the correct bit size on the disk (32-bit or 64-bit) depending on your computer?  Download and check things with the Vista Upgrade Advisor:http://www.softpedia.com/progDownload/Windows-Vista-Upgrade-Advisor-Download-40277.html (although I suppose that it is is not possible if you have already formatted the drive) and at least check the different devices and installed the software in Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/.

    Here is an article on this specific problem with recommended solutions: http://support.microsoft.com/kb/925481/en-us.  Note that it says may be a problem with the BIOS (the installation or version) - so you should check the settings and then contact the manufacturer of the computer for the updates that you can install.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

    Hello world

    I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
    I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

    I would be very grateful if you could help me

    Hello

    I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

    Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Let us know the results. We will be happy to help you further.

  • Vista Home Premium will not read/recognize/burn HD videos taken with my Canon camcorder HDD21/AVCHD (MTS format). Results in the message stating "Windows Media Player may not supported file type or the codec that the file compressed.

    I have a Vista Home Premium 64-bit, Service Pack 2 Dell.  He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format).  Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed.  I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family.  I'd appreciate any help.  Thank you

    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  • Error, Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk.

    problem with installing win7 on my toshiba satellite c600 system. during the installation of the OP it says that windows cannot install on the drive. in the detailed information, it says"windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. ensure that the drive controller is enabled in the bios menu. the computer', but there is no such thing of controller in my bios menu. IM using usb to install win7 ultimate. Thank you

    I would check with the computer manufacturer to see if there is an updated BIOS updated.

    Thank you

  • WLC can result only is not supported 128 bit WEP on 1120-1200-1240 AP; s WHY not?

    When I activate the wep 128 bit on the WLC I get the message

    "Size of the 128-bit WEP key is not supported on the AP 1130,1200 models and 1240"

    Why these models (the models I use!) do not support 128-bit wep? is it possible to make them support. ?? they are supported in STANDALONE mode?

    Beware with wep and key length:

    a. 40-bit key + 24 bit iv = 64-bit Wep

    b 104 bits key + 24 bit iv in the Group 128-bit Wep

    c. 128-bit 24-bit iv plus 156 bit Wep

    Aironet, you can select option a and b and it's a little confusing because they say 40 and 128 in options where 40 reference the key and 128 references in total. Believe me count hexadecimal numbers and you will see where cisco said 128 he would to be 108.

    ex:

    VLAN 20 3 size 128 bit 7 741F07447BA1D4382450CB68F37A key transmit encryption keys

    http://www.CSE.WUSTL.edu/~Jain/cse574-06/FTP/wireless_security/Fig14.gif"/ >"

    Airespace, you can select option a and b and it's a less confusing because they say 40 and 104 in the options if 40 and 108 refers to the key.

  • When you try to install Windows 7, download "this computer's hardware may not supported booting from this drive.

    I have a LG laptop I want to install Windows 7 on my try to choose a hard drive it says hardware on this computer, but it may not support booting to this disk. Ensure that the drive controller is enabled in the computer's BIOS menu. Please tell me the solution of this problem.

    See the following topics:

    http://support.Microsoft.com/kb/925481

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Click on drive Options

    Select the disc/s click on Delete

    Click new

    Click on apply

    Click OK

    Click Format, and then click next to proceed with the installation

  • Cannot open the document. You may not have permission or the document can be opened already.

    Whenever I try to open a document on our Mac server I get this error message: "cannot open the document. You may not have permission or the document can be opened already. "After that, I click Ok and then am able to open it. What is interesting is that immediately after the first time I try to open the file and get the error message that I noticed a .idlk (file locking) gets created even if she could not open. After that, I open it. Then, once I close it, the lock file goes.

    Someone knows something about this problem? For this particular user permissions are read/write on the file and all documents.

    Yosemite 10.10.3

    InDesign CC 2014

    Well, the problem has been resolved. It ends up being ESET antivirus v.4.xx for

    company. After I disabled it temporarily everything worked normally. So created

    exclusions for the shared network resources that they are working for.

  • Error "could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

    How do I solve this problem

    "Could not open the file" *. " INDD. Adobe InDesign may not support the file format, a plug-in that supports the file format is maybe missing or the file may be open in another application."

    It turns out that a Windows computer has been infected by a virus that worked its way to the server. We zapped the virus and restore the backup files.

  • trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea?

    trying to high grade from vista to 7 and my coputure goes out 3/4 of the way in the installation. I start it and say my computer may not be to the highest ranking of any idea? I got a microsoft tec tring to understand with a bit of luck again!

    Hello

    in this case, contact the HP support

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

    or HP Support forums

    http://h30434.www3.HP.com/

    or repost in the correct forum for windows 7 that I have already advised you to do

  • Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

    Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please

    Hi Mallik7, please try the following steps, you must succeed to solve the problem.

    To connect a client to vCenter directly to the ESX host error-free work.

    Files/etc/vmware/config the ESX host contain the lines:

    ------------------------------------

    authd.soapServer = 'TRUE '.

    prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

    Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

    ------------------------------------

    This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:

    1 make a backup of this file from the path - / etc/vmware/config, by running the following command:

    CP/etc/vmware/config/var/tmp /.

    2. edit/etc/vmware/config so that there is a return transport after the line:

    prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

    While he reads the following:

    ---------------------------------------------

    authd.soapServer = 'TRUE '.

    prefvmx.consolidateDeleteNFSLocks = 'TRUE '.

    Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.

    Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.

    ---------------------------------------------

    3. restart the management agent spend.

    Note: Make sure that you are not in your environment name resolution problems.

  • Can you please tell me why my subscription of the CC is spent $ 31,79 per month to $49.99 per month? I was not told that there is an increase.

    Can you please tell me why my subscription of the CC is spent $ 31,79 per month to $49.99 per month? I was not told that there is an increase.

    You SHOULD have received an email reminding you that your launch price would go up to regular price at the end of your first year

Maybe you are looking for

  • Use the WLAN on my Satellite U500 - 1-8 - PSU9ME canoe

    Hi.I reinstall my win7 on this laptop and now I can't go to the internet with my wirles adapter(built-in) and I can't find the drivers on the internet Help?

  • Error 0XFFFB388E

    Hello I have a problem with my chassi PXI-1045. The configuration is the following: PC--> PCIE - 8361--> PXI - 836--> PXI-1045 I'm going on the software MAX, right-click on "chassis (unidentified)", identified as and PXI-1-45. Then, I got the followi

  • Digital i/o with clock sensor line sharing

    Hello I'm trying to contact several sensors relative humidity using LV 8.6 and a USB-6009. The sensors are Sensirion SHT71. They communicate with 2 lines, a bidirectional data line and a line of the SCK. With the code sent on this forum http://forums

  • My dvd player won't record

    Original title: dvd player My dvd player will not record. I know I'm doing something wrong. I've had a stoke in a year and a half ago. I'm sorry but I don't know what to do. Last week I couldn't remember how to print. Thank you for all that you do. C

  • painting adjust the brightness and contrast

    Where and how can I adjust brightness and contrast in a photo?  Recently installed windows 7. Directions say paint is open, then open the photo, and then click settings. I HAVE NO OPTION TO CLICK ON SETTINGS, can NOT FIND TOOL BAR AS SHOWN IN THE INS