may the subscription is not active, what to do?
peut the subscription is not active, what to do?
Tags: Adobe
Similar Questions
-
When I try to open a JPEG file in Adobe Bridge I get the following message: "the original application of the bridge is not active. "Bridge that requires a product calling it launched at least once to activate this feature. What should I do for this problem to be able to open JPEGs in Adobe Bridge?
Open Photoshop first... or any program that you bought that included bridge
-
Cursor disappears when entering, the window is not active.
I have Vista home SP2.
When I type the cursor disappears and the typing stops. The window is not active until I'm clicking on it again. It's as if it times out.
I thought it was just Firefox, but that's all. I watched q. similar, but nothing. It has been since the last update, or just before, then, either, about 3 days.Hi Hobittual,
Follow the instructions below that may help you resolve the issue.
Method 1:
Follow the instructions to start the computer in safe mode.
1 turn on the computer or restart the computer
2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
3. ensure that the safe mode option is selected.
4. press ENTER. The computer then begins to start in safe mode.
Check if you have the same problem in safe mode as well.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2:
Let us perform virus scan online that may help you resolve the issue.
Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.
- Check and remove viruses
- Get rid of junk on your hard disk
- Improve the performance of your PC
Click on the link below for Online Virus scanner.
Check whether the problem is resolved.
You can go to Microsoft Security Essentials protect your computer from malware.
Click on the link below for more information on Microsoft Security Essentials.
http://www.Microsoft.com/security_essentials/
You can also check out the link below.
How to get rid of malware
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
-
Whenever I want to use Camera Raw preferences, I get the message "the original application of the bridge is not active. How can I fix?
Hi yvesd,
What version of the bridge are you using?
- Please close bridge
- Open Photoshop
- Open a picture
- Select the file > Browse in Bridge
Also, make sure that you have compatible versions of Bridge and Photoshop, as if you use Bridge CC, make sure that Photoshop CC (latest) is installed.
Kind regards
Assani
-
Hi guys. can't understand why the effects are not active? IM using the trial muse on PC
Maybe you'll find the answer here:
Why can I not apply effects to the text in CC MUSE?
If not, you must explain specifically what you want to know.
-
The initial application of the bridge is not active
Hello
Suddenly, I encountered a problem with Adobe Bridge, where it is not allowing me to open. CR2 files in Camera Raw. When I right-click on an image in Bridge, an error message appears:
"The initial request of the bridge is not active. Bridge requires a product calling it launched at least once to activate this function. »
Originally, I opened Photoshop CS6, then file > Browse in Bridge. I opened cab to hundreds of times on this computer so I don't understand why he wants me to open to use it. I open a RAW file in Windows Explorer, but when you go back to the bridge, the same error occurs.
Anyone know what is the problem and how to fix it?
Windows 7, Photoshop CS6 64-bit, 7.1 ACR, Bridge CS6 64-bit.
Thank you!
Pygmaeous wrote:
I found an answer that worked for many people and, more importantly, has worked for me in a post on flickr by girl_of_tea - http://www.flickr.com/photos/norkabizi/5159300558/
It is said
App.Box.com/s/kr8t53nudkf14vdweckm
Download the amtlib.dll file in the link above and paste it in C:\Program Files\Adobe\Adobe Bridge CS6 (64-bit) (replace the old one)
It works solutions for me! Thank you!
-
Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop. I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2. Any help is appreciated.
The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?
The connection doctor (window menu) displays errors.
-
* Original title: opening with a tile on the start menu
When I click on a tile (windows8.i) screen just flicks and the program does not open what went wrong and can I fix it?
(Moved to customization and ease of access)
I thought I made the text in a link from my mistake. Here is the page: solve the problems with an app
-
I can't connect to my user profile who is also the administrator. I get a message that the password is incorrect, however I have not changed the password. My 11 year old niece used the pc last (play online games) and I was informed that it was a download/installation, but do not now what it was. I can't download or update any information on the pc that this requires the admin password. I am currently using the guest account, that does not give me access to all programs and the pc is running a little slower than ususal. Your help with this questions is appreciated.
the operating system is Windows Vista Home Basic 32-bit.
Hello
If your niece has changed the password, or you have a corrupted system, this Information Microsoft will help you.
Here are the different circumstances where it can help you.
You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
And as you say that your niece may have downloaded something, that something could have been malicious, that can cause problems with password.
Download, updatre and scan your system with Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
See you soon.
-
Can I replace the memory and not to lose what's on the memory of the former? I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed. I have a backup device. A RAM slot is damaged.
You are confused of RAM and disk space available.
RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.
The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.
FYI, for your iMac, the maximum RAM is only 6 GB.
-
the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop. I am unable to work as the laptop does not work without the activation key.
Hello
You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.
Or take a picture of it and expand it on the screen.
______________________________________________________________
Also that, read also:
You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.
They should do this for a fee, if they still have available to them.
_____________________________________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
____________________________________________________________
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.
See you soon.
-
I have a windows Vista Home Basic in my pc, so I can't update it cause when I click search for updates, it says windows cannot check the updates because the service is not running
Hi joselizama,
- Did you the latest changes on the computer?
- What is the full error message that you receive?
- You have security software installed on the computer?
- When was the last time it was working fine?
Method 1
I suggest that you restart all services related to Windows update and check later if you can install the updates of Windows on the computer.
To restart services required by Windows Update
You must be logged on as administrator to perform these steps.
- Open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
- Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the Services window, double-click in the Background Intelligent Transfer Service.
- Under the tab general , under Startup type, click Manual, and then click apply.
- Click the connection tab and make sure that the service is enabled in every hardware profile listed.
- Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the Services window, double-click Windows event log.
- Under the tab general , next to Startup type, make sure that Automatic is selected.
- Next to Service status, check whether the service is started. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the Services window, double-click the Windows Update service.
- Under the tab general , next to Startup type, make sure that Automatic is selected.
- Next to Service status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the Services window, double-click software licensing.
- Under the tab general , next to Startup type, make sure that Automatic is selected.
- Next to Service status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Close the Services window and try to install Windows updates again.
Method 2
If the previous step fails then I would suggest that reset you the default Windows Update components and later try to install updates.
How to reset the Windows Update components?
-
Hi, my laptop had rose appear on my screen do not know what it is and if it is normal that in laptop? Thank you, Nicole
Hello
If this continues, contact technical support to your system manufacturer and check their forums (if any) for known issues.
Try a system restore before it happened. You can use the SafeMode if necessary - several times
as you start, press F8.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
-----------------------------------------------------------------------------If no joy you can once again tap F8 as you boot and select last good Configuration know.
----------------------------------------------------------------------------
And need to update your video drivers:
Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
Sites of the manufacturer of the device.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Scan of the computer is not activated after reboot
I have an Officejet 7500 a wireless connected to my network. A Windows XP system installed the management software. I have activated the service computer scan and it works very well. However, the XP system shuts down every night and when it is restarted the computer scanning function is NOT active.
Is it possible to activate computer scan automatically when the XP system starts? It's a pain in the neck having to open the management console and activate it manually every day.
Thank you.
Hello
Have you installed the latest version of the software from the website or used the original software?
The eralier indeed requested software to allow scanning to computer restarting the PC, the latest version of the software allow however to paramantly.
If you have the original software (can be identified by its black background) uninstall by clicking programs > HP > Officejet 7500 a > Uninstall.
Then download and install the latest version of the software below:
Shlomi
-
Accidentally changed the password, do not know what it changed
I changed my Windows 7 password. I entered the existing password, and without thinking, press ENTER. He told me that my password has been changed. I have not now what it was changed to. I don't have that 1 the admin account... I know, bad choice. Is it possible to find my password?
Is it possible to find my password?
No, it does not exist, but you can do:
- Set your BIOS so that it uses the DVD drive as its primary boot device.
- Start the computer with your Windows 7 repair CD.
- Press a key when prompted to boot from the DVD.
- Select 'PC Repair' in the menu.
- Select 'Repair' when prompted.
- When you are prompted, select System Restore.
- Configure Windows to a point before you changed the password.
- Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
Maybe you are looking for
-
Updated Snow Leopard to Yosemite now (may 2016)
-After years of use of Snow Leopard on my iMac 27 "10.6.8, I've upgraded directly to El Capitan. -No problem to do so. -When you use El Capitan, I encountered several problems (unsupported software and hardware). -J' therefore decided to install Yose
-
How to get back Firefox 5 Firefox 4
I just upgraded to Firefox 5 and found that it does not support the Google toolbar, I need. Until Firefox 5 supports this toolbar, I want to go back to the previous version of Firefox. How can I do this?
-
Kernel panic / frequent rebooting
Hello people,My Macbook Pro (mid 2010) restarts with what I understand is often called a (error below report) kernel panic. When I say often, I hear it could be once a day or 10 times a day. Is no longer under warranty. All the advice is appreciated
-
Question of ES1-711 P1UV pilot
Good evening everyone. I have an Acer ES1-711 P1UV that I recently formatted the disc for. I'm currently trying reinstaling the drivers. The Device Manager shows the unknown device error. I sought the material under properties ID and found this... AC
-
HP Photosmart Plus B209a-m black cartridge will not print
My HP photosmart Plus 209 a, m stopped printing black ink. I've had less than a year, and it worked perfectly until last night, when all of a sudden it stopped printing black ink... All other colors work very well. I took all the actions proposed by