MBA crashes when loading

Hello comrades! My trusty 2011 MBA 13 "served me wonderfully until he started to crash and restart very often (with the message"your computer restarted because of a problem", ==> http://i.stack.imgur.com/0Fpgn.jpg ).

This happens only some time after it is connected to a MagSafe charger - my wife also has an MBA and the same thing happens when I use his charger, so I guess that this is unrelated to the charger. Also, since a few days ago the green light on the adapter is not always light up immediately - I must move a bit until it fits and starts to load effectively.

Someone knows something similar? BTW, my battery seems to be ok according to system information:

Battery information:

Information model:

Serial number: D8620930313DKRNAZ

Manufacturer: SMP

Device name: bq20z451

Pack Lot Code: 0

PCB batch number: 0

Firmware version: 406

Review of material: 000D

Review of cells: 162

Information on this charge:

Charge remaining (mAh): 4486

Fully charged: No.

Loading: No.

Full Charge capacity (mAh): 5257

Health information:

Cycle Count: 255

Condition: Normal

Battery: Yes

Amperage (mA):-3095

Voltage (mV): 7694

Any ideas? It could always be connected to the battery? Or I might have something else (for example the MagSafe connector in the laptop) replace?

Thank you!!!

It seems that the MBA had a kernel panic.  Open a session and post it by these instructions:

https://support.Apple.com/en-us/HT201753

Ciao.

Tags: Notebooks

Similar Questions

  • Satellite L675-11R - crashes when loading the BIOS

    Hello

    My daughter L675 crashes when loading the BIOS.

    Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

    I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

    After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

    I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

    I double checked that the drive & Modules of memory are well inserted.

    Any ideas I can try?

    Thank you

    John

    Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
    I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
    Then try to install the Windows system on this device.

    In addition, you can try to check this HARD disk using a 3rd party software.
    Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
    If some errors would be detected, then a replacement HARD drive would be desirable.

  • Satellite L500-19 x crashes when loading dvd software

    Satellite L500-19 x crashes when loading dvd software. It's photoshop elements 9. Other software by load generally okay, but not always.

    Any ideas?

    Hi shownomercer,

    Have you tried the Photoshop disc in another computer to check if the installation disc is ok or not?

    What exactly happens when the computer crashes? Blue screen?

  • I get the error as adobe Illustrator crashes when loading multiple pages PDF. Please help me. Thanks in advance.

    Hello

    I get the error as adobe Illustrator crashes when loading multiple pages PDF.

    Please help me. Thanks in advance.

    Adobe error.PNG

    Illustrator is limited to 100 work plans. Up to 120 pages will never work.

  • "Scratch disk" was almost full attention. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I t

    "Disk zero" was almost full warning. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I then decided to upgrade to the 2014 version, update. He worked twice and now repeat the same problem, I have lived before update. This only happens when I'am connected under "other user account" as I had been when the accident happened first and not as an administrator. I purged the cache, more space for performance, etc. in Admin mode, I ran permission repair in public services, but when I change the user account, photoshop crashes with seconds loading. Please notify 2.8 GHz Intel Core i7, 8 GB 1600 MHz DDR3

    As you can already read in your crash report - the crash has little to do with Photoshop and everything to do with your Nik/Google SelectiveTool plugin.

    Disable this plugin and contact Nik/Google for an update that fixes bugs in this plugin.

  • Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.

    Adobe Bridge CS3 crashes when loading in my Windows 7 workstation.
    I've recently completely removed, disabled and reinstalled all my Master Collection Adobe Creative Suite CS3 to fix some problems with another application in the suite, and now I'm surprised bridge continues to fail. In my mobile workstation, the same software (bridge) uses to run.

    I tried to run Bridge under several compatibility modes. All have failed.

    Is there any bug to know, that I should be aware of? Any difficulty?

    Is this a common problem?

    Have you tried to reset the preferences?  Hold down the CTRL key and launch Bridge.  You will get a window to reset.

    By accident, it means that the computer has to be reset?  It freezes?  Error messages?

    Not enough information in other words.

  • Firefox crashes when loading websites with videos or watch videos

    I've only known short Firefox slow or crashes when I visit websites with embedded videos. The problem mainly occurs when I try to watch the video, but even just to load the web page. Any video site linked to, that's the problem with Youtube, Vimeo and others. What could be wrong?

    Hi again! It seems that the problem resolved itself... Probably by the new update of Firefox or any update of the oher plugin I made last week. I can watch Youtube videos without problems.

    So, for now... I guess we can call this resolved. But I don't know for sure what caused the problem and what has been resolved.

    Please post answers and be willing to help me.

    Above and outside.

  • Hearing crashes when loading the automatic click Remover

    I just encountered a problem where Adobe Audition CC 2014 (fully updated) will crash when you try to open the plugin "automatic click Remover. One interesting thing to note is that if I have no Favorites saved using the automatic click Remover, it will terminate the process that the plugin is running without problems. It's only when you try to enter the plugin to adjust settings that it will immediately crash the program before it can load it manually. I use my favorites not bad, so I don't know if this problem came due to a recent update, or if it was hidden a long time ago, but I never found it until now.

    I'll probably try to reinstall the hearing soon but thought I should post about it here first. Any help would be appreciated.

    Well a few plugins more has started to plant too, so I re-installed and everything seems to work now.

  • Java games crashing when loading on Satellite Pro C660D

    So I have the Toshiba Satellite Pro C660D for Christmas. The first thing I did as a teenager was to examine the specifications to see if she would be able to reasonably run the games.

    Care was fine for me. So I installed a few games, Minecraft installed first, which crashed. I then install Farming Simulator to see if it was just Minecraft, farming Simulator crashed.

    I tried to install the latest drivers from the Web site intel however, Setup seems just close when the installation is about to begin.

    I am really very disappointed because my old Dell inspiron 1525 which has been literally if collapse will run these games very well.

    If anyone can help it would be much appreciated.

    Thanks in advance,
    Connor

    Chalky Hello,

    You're not alone, my son has saved his Christmas money to buy a Satellite C660-21Z. I checked on the minecraft site by putting in the specifications of the machine and it should work just fine. When we try, it crashes when connecting.

    This seems to just be a Toshiba _problem games_ java running, and there is already stuff of minecraft in this regard support forum. I started in Bartpe XP and got, it works using _it is not a hardware problem, _ but the satellite comes with win7 and I don't want to go down.

    I tried to put java day and according to the minecraft forum, the problem is that the Satellite comes with the ATI driver that needs to be removed. That would be wise because it works with a Bartpe bootable disk, but not with the Toshiba software package. I'm afraid to support Toshiba seem very reluctant to help, because you have probably already found. >>

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63212

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63124

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64845&TSTART=0

    As minecraft works ok off a bartpe cd, I would say that there must be a problem of Toshiba running and it works ok on other laptops, and also other Java games seems to fail on the C660, I guess that there is a conflict of drivers with java. I'm sorry, but nobody else seems to be able to get a c660 longer works.

    I bought mine from Amazon that I noticed that many of those "renovated", may be returned and exchanged because they do not have Java?
    I'm giving my son until January and then request a refund if we cannot make it work.

    Sorry I can't help more and please let me know if you get a solution because otherwise it seems a nice laptop.

  • Satellite L775-119 crashes when loading

    I had my L775-119 Satellite in 2011. Recently, I noticed that it will crash when I am in charge when started in Windows, especially when video plays online, when I unplug the charger, the fan slows down and act normal.

    I think that Windows may need wiping and re - install, its seems to do it when I'm trying to do too much multitasking, one had the same problem or can offer advice please?

    Thanks David

    I m confused about your message.
    When the laptop stick? Only when the AC adapter is connected or also when running on battery?

    Since this is not clear to me if it's a software or a hardware related issue, I recommend you test the laptop using factory settings. I mean that you should retrieve the laptop to factory state using the recovery disk.

    Run a few tests and post comments.

  • App crash when loading very large images in Spark Image component

    Hello world

    A client of ours should display very large jpgs (about 8000 x 5000 px), which are the object of a scroll and zoom using touch gestures.

    To my surprise, even, the performance to do this using a scroller is pretty cool

    BUT unfortunately the application sometimes freezes when loading the image. (about 15% of chance to do)

    Debugger does give no info at all, simply closes debugging.

    Does anyone have an idea what could be causing this or how to avoid this?

    PS tested on several machines and different Versions of Tablet, including 2.1.0.1032

    Thx a lot.

    Tim.

    Sorry it took me a long time to respond, but I had other issues to be addressed in the first place

    Use the Profiler showed a leak memory in the skin of the viewer of the image.

    It is a memory problem.

    I must put BimapImage null source value before destroying the display manually, even if I had no other reference to it.

    A little strange, but this solved my problem.

    He could reappear obviously using a single image much bigger, but I guess that it must accept some limits on a mobile device somehow.

  • AE CC 2015.3 crashes when loading

    I get the following error report when loading AE CC 2015.3. This error occurs if run as Admin or not.

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: AfterFX.exe

    Application version: 13.8.0.144

    Application timestamp: 57512541

    Fault Module name: cilkrts20.dll

    Fault Module Version: 2.0.4184.0

    Timestamp of Module error: 53684797

    Exception code: c0000005

    Exception offset: 000000000000c6f7

    OS version: 6.1.7601.2.1.0.768.3

    Locale ID: 1033

    Information additional 1:1277

    More information 2: 127757f4d1f3dfd83ff64ad60a507e54

    Additional information 3: b28c

    Additional information 4: b28c60d059a0b38ead93c9d9c8477cd5

    I ran the repair for Microsoft redistributable 2015 (both x 86 & x 64), but that does not alleviate the problem. I could solve the problem by deleting files of preferences that have been imported from the previous version of the AE. This forced AE to use default preferences, and I managed to load the program. I was then able to restore all preferences exactly as they were for the 2015.2 version and still had no problem. Not sure why the automatic import of these settings could cause a problem.

    I noticed that after updating the driver Nvidia to the last version that I was no longer able to set enable GPU tested for CUDA acceleration in the Previews of the AE preferences page. A message indicates that the card was not recognized. I had to go back to a previous version of the Nvidia driver in order to use the GPU again.

  • SurCode ac3 encoder crashes when loading first Pro CC 2015

    This also happens with media encoder.

    First Pro CC 2015 and media endcoder crash on loading the program, which makes them unusable both...

    Remove this file might help, but I don't know which is nessesery

    file:///applications/Adobe%20Premiere%20PRO%20CC%202015/Adobe%20Premiere%20PRO%20CC%202015.app/Contents/plug-ins/SurCodeAC3Encode.bundle/

  • Dreamweaver crashes when loading SFTP

    Hello

    My DW CS6 crashes whenever I try to download files in BC via SFTP. It doesn't to any FTP connection, I think it has to do with BC-SFTP-connec. When the computer reboots, he worked several times, but soon I stop working for a few minutes, next download fails. I'm up-to-date with my updates (CC).

    Problem becomes even worse in recent weeks, as the interval, after which, I can't download more shortens. First of all, I could idle for about 10 to 20 minutes, now DW hangs after a delay of 3 to 5 min. sometimes after a reboot, his work not at all.

    I need urgent help, in this case, as all my clients are in BC. !

    Best regards, Dennis

    Hello

    the guys kind of Adobe seem to have solved the problem with the connection to BC, great, thanks for that.

    The problem with my DW to crash when you try to connect to BC seems to be caused by the use of a Qnap NAS who I saved my files. When you use the access path to the NAS in DW site definitions, it crashes from time to time. As soon as I changed the path to a local directory on the hard drive of my computer, the error occurs no more.

    Dennis

  • FF29.0 crashes when loading loading with tab groups, very well without tab groups. WHY?

    I have approximately 16-18 groups of tabs (at least, I did it in FF28.0). When the update FF29.0, FF crashed EVERY time when trying to load. Finally, I did a fresh reinstall of FF29.0. After you have reinstalled my 18 modules, I ran the Session Manager and loaded a session from before I had updated to 29,0. He had all my groups of tabs! WOW, it load. Well, it loaded only ONCE. He never asked again. Crashes every time. I saved sessionstore.bak and sessonstore.js at different times. I copied an of before the crashes and FF29.0 works very well. It does everything just not with all of my tab groups. Crashes every time during loading. If it does not work with my registered tab groups, I'll be forced to return to FF28.0. Would not progress.

    I SOLVED THE PROBLEM!
    Turns out to be the the traffic light (BTL) Bitdefender module. Well, any.
    BTL verifies each NEW site against a master list of 'bad' sites. Does ONCE for each NEW site, you're going to. apparently, it holds a register that there is no need to double-check sites, he already deleted. I have about 160 Web sites registered in 16 groups of tabs. In Firefox 28.0, these sites have been deforested when I visited them. When I try to move to 29,0 FF, BTL tent now re - CHECK all 160 sites! What happens while FF 29,0 installs and has just overwhelm the program installation or my computer to make the installation crashes! During installation, I noticed my CPU monitor 4 cores would be twittering about 30-40% along the CPU usage when all of a sudden all 4 cores would hit 100%. This will continue until the installation would break (after about 10-15 seconds).
    So, I finally tried a relocation that would lose all my Add-ons, but keep my tabs, bookmarks and tab groups. With NO Add-ons installed, 29.0 FF was fine and all my tabs and groups of tabs were still there. The first add-on I installed was BTL. She appeared to open a new tab telling me that the site Web of EACH tab (all 160) was OK. So, he opened more than 160 tabs to say that every site tabs was clean! It took a while. (But not as long as it took to close!) So, after the closure of all 160 tabs, I restart 29,0 FF and NOT of PROBLEMS! Opens right and I still have access to all of my tab groups. After 3 hours, I managed to install all the ons Add-21 I had before. YES!
    The short answer, I suppose, is simply uninstall BTL FF 28.0 to 29,0 pre-upgrade. Then install BTL and wait until it finishes its controls to close all tabs. Hope this helps someone.

Maybe you are looking for