MBP early 2011 camera does not

Hello

I have tried everything mentioned in this thread, like:

  1. kill the process of VCDAssistant (I might have misspelled earlier)
  2. Reset the SMC
  3. Drain/battery AC only use
  4. Create a new user
  5. Perform a clean installation
  6. Use a third-party software

Nothing I've tried looking at the camera. Does anyone have any other suggestions?

Take your MBP for a Genius Bar for some tests...

Mine is end of 2011 and I am happy that I am and control me.

Tags: Notebooks

Similar Questions

  • MBP early 2011 start running slow

    Hello

    I use MBP early 2011, i7 2.2 Ghz, 8 GB RAM, 750 GB HDD (573 GB free). Its pretty slow operation and initialize the time is more than 3 minutes. I ran EtreCheck and the result is the following.

    Several times in a day, MBP stops responding for a few minutes. It was everything beautiful, until it has been upgraded to El Capitan.

    Battery back up also seems to be about 2 hours with WiFi on and charging takes about 8 to 9 hours for a full charge. I use the genuine Apple magsafe adapter.

    Help, please. Thanks in advance.

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-11 20:59:12

    Download https://etrecheck.com EtreCheck

    Time 01:38

    Performance: Excellent

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Problem: The computer is too slow

    Hardware information: ⓘ

    MacBook Pro (15 inch, early 2011)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro8, 2

    1 2.2 GHz Intel Core i7 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1333 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1333 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 51

    Video information: ⓘ

    Intel HD Graphics 3000

    Color LCD 1440 x 900

    AMD Radeon HD 6750M - VRAM: 1024 MB

    System software: ⓘ

    OS X El Capitan 10.11.5 (15F34) - since the start time: about an hour

    Disk information: ⓘ

    TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Untitled (disk1) /: 748,93 go-go (573,38 free)

    Storage of carrots: disk0s2 749.30 GB Online

    MATSHITADVD-R UJ-898)

    USB information: ⓘ

    Computer, Inc. Apple IR receiver.

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Configuration files: ⓘ

    / etc/hosts - number: 2

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Kernel Extensions: ⓘ

    / Library/Application Support/Kaspersky Lab/KAV/Bases/Cache

    [loading] com.kaspersky.kext.kimul.46 (46 - 2016-06-11) [Support]

    [loading] com.kaspersky.kext.mark.1.0.6 (1.0.6 - 2016-06-11) [Support]

    / Library/Extensions

    [loading] com.kaspersky.kext.klif (3.4.0a25 - 2016-06-04) [Support]

    [loading] com.kaspersky.nke (2.1.0 - 2016-06-04) [Support]

    [loading] com.logitech.manager.kernel.driver (5.40.1 - SDK 10.8 - 2016-06-04) [Support]

    Launch system officers: ⓘ

    [loaded] 8 tasks Apple

    [loading] 158 tasks Apple

    [operation] 72 tasks Apple

    Demons of launch system: ⓘ

    [loaded] 47 tasks Apple

    [loading] 162 tasks Apple

    [operation] 81 tasks Apple

    Launch officers: ⓘ

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-12) [Support]

    [operation] com.kaspersky.kav.gui.plist (2016-06-11) [Support]

    [operation] com.logitech.manager.daemon.plist (2015-11-20) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2016-05-12) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.ARMDC.Communicator.plist (2016-04-07) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-04-07) [Support]

    [loading] com.adobe.agsservice.plist (2016-05-12) [Support]

    [loading] com.adobe.fpsaud.plist (2016-05-10) [Support]

    [operation] com.kaspersky.kav.plist (2016-06-11) [Support]

    [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-15) [Support]

    [loading] com.microsoft.autoupdate.helpertool.plist (2016-06-04) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2014-05-09) [Support]

    [loading] com.microsoft.office.licensingV2.helper.plist (2015-08-30) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2016-05-12) [Support]

    Launch User Agents: ⓘ

    [loading] com.adobe.ARM. [...]. plist (2016-05-12) [Support]

    [loading] com.bittorrent.uTorrent.plist (2016-04-07) [Support]

    [loading] com.macpaw.CleanMyMac3.Scheduler.plist (06 / 06/2016) [Support]

    Other applications: ⓘ

    [ongoing] com.etresoft.EtreCheck.171872

    [ongoing] com.Google.Android.mtpagent.73632

    [loading] 417 tasks Apple

    [operation] 175 tasks Apple

    Internet Plug-ins: ⓘ

    AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-12) [Support]

    FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-30) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-19)

    AdobePDFViewerNPAPI: 15.007.20033 - SDK 10.8 (2016-05-12) [Support]

    AdobePDFViewer: 15.007.20033 - SDK 10.8 (2016-05-12) [Support]

    Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-30) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-19)

    SharePointBrowserPlugin: 14.6.2 - SDK 10.6 (2016-04-10) [Support]

    MeetingJoinPlugin: Unknown - SDK 10.2 (2016-04-10) [Support]

    JavaAppletPlugin: Java 8 update 92 build 14 version Check (2016-06-06)

    The internet user Plug-ins: ⓘ

    Folx3Plugin: 5.0 - SDK 10.6 (2016-06-11) [Support]

    The Safari Extensions: ⓘ

    AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-13)

    3rd party preference panes: ⓘ

    Flash Player (2016-05-10) [Support]

    Java (06 / 06/2016) [Support]

    Logi Options Launcher (2016-04-15) [Support]

    Time Machine: ⓘ

    Time Machine not configured!

    Top of page process CPU: ⓘ

    5% WindowServer

    1% fontd

    1% kernel_task

    1% AddressBookSourceSync

    1% kav

    Top of the process of memory: ⓘ

    762 MB kernel_task

    KAV 221 MB

    WindowServer 98 MB

    90 MB mds_stores

    Soagent 82 MB

    Information about virtual memory: ⓘ

    3.59 GB of free RAM

    4.41 GB used RAM (2.15 GB being cached)

    Used Swap 0 B

    Diagnostic information: ⓘ

    June 11, 2016, 19:43:41 ~/Library/Logs/DiagnosticReports/firefox_2016-06-11-194341_[redacted].crash

    org.mozilla.Firefox - /Applications/Firefox.app/Contents/MacOS/firefox

    11 June 2016, 19:05:01 test - passed

    June 10, 2016, 09:19:02 /Library/Logs/DiagnosticReports/firefox_2016-06-10-091902_[redacted].cpu_resour ce.diag [details]

    Uninstall Kaspersky and CleanMyMac according to their own instructions. Any improvement?

  • Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus

    Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem

    You see a black screen or a closed lens

    If you see a closed lens or a black screen when you open the camera app, try the following steps:

    1. Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
    2. Force the application to close, then open the camera again.
    3. Restart your device, and then open the camera again.
    4. If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.

    Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  • Click camera does not

    Hi all

    I have a 6s model 64 GB iPhone.  For some reason, the click of the camera does not work when you take a normal picture.  If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.

    I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.

    Any ideas on how to fix or is this a known bug?

    Thank you

    Paul

    Hello, you can try to do a hard rest before to backup your data.

  • After the replacement of my iPhone screen 6, front facing camera does not work.

    After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?

    If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.

  • Camileo S10 camera does not remember the setting of the image stabilizer

    Hello reader Forum,.

    Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
    I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

    Greetzz... Ben

    Hello

    This could be possible.
    I remember that the focus does not work if the stabilization has been activated
    So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

    Welcome them

  • Re: Satellite L300 - camera does not work after upgrade to Win7

    As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

    There is no exclamation point in the system.

    Satellite L300 (PSLB8E)

    Hello

    What happens when you start the webcam app?
    All programs-> Toshiba-> webcam

    Did you install other 3rd software part as for example the Skype that could access the webcam?

    Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
    Start Skype for example, check the settings in Skype webcam chose correctly.

    It would be really interesting to know if the other software would be able to use the webcam.

    By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
    Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

  • Web Cam does not work on my Satellite Pro C850-10 t

    Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

    What should I do?
    Thanks in advance :D

    Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
    Webcam is entered correctly in the Device Manager?

  • I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

    I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

    Hello mpm068,

    Thank you for using communities of Apple Support.

    Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

    1. Choose the Apple menu > shut down.

    2. After your Mac stops, wait 10 seconds, then press the power button.

    3. As soon as you hear the startup tone, hold down the SHIFT key.

      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    To exit safe mode, restart your Mac, but no press during the startup.

    OS X El Capitan: start in safe mode

    Take care.

  • camera does not turn on

    I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

    The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

    Note: The charging light turns off, charging is completed.

    If the camera does not turn ON even when the load is in progress, the service is required.

    You can initiate the service from the link below:

    https://eService.Sony.com/

    You can also contact our telephone support or Chat to try additional troubleshooting procedures.

    http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

    Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

    If my post answered your question, please mark it as "acceptable Solution".

  • Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

    I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
    I checked the drivers and they work, I have 10 Diretcx and it works.

    When I open the camera program, it works well.
    I put the camera program is not at initial start-up of laptop.
    I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

    Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    Hello

    > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
    You should check if the webcam has been chosen correctly in Skype video settings.

    If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

  • Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

    Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

    And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

    Can someone suggest me the right version of the bootcamp software please?

    Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

  • Camera does not work on my Satellite C50 - B

    C50 - B PSCMLA-02F00S satellite

    I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.

    I want a video contact in Facebook, my family and the camera does not work.

    Can someone please!

    Hi Alicia

    Are you using the original operating system preinstalled that you got with your machine?
    I assume it must be Win8.1, right?

    What happen when you try to use photo app?

  • Satellite L500 - Web Cam does not work

    Hello.

    My book built into the camera, and that camera thos not inicialize,

    I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

    Is there a way to fix it?

    Thank you.

    The question is: is cam material recognized and detected by the system or not?
    You can see in the Device Manager?

  • Camera does not

    My camera does not... tried all the possibilities... my OS is Windows 10. attached.pls help screen capture

    HII, thanks for your response.

    The problem was solved when I have the software device driver upadted.

    Concerning

Maybe you are looking for