MBPr 2013 - is this visual glitch a hardware problem?

Similar Questions

• We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please, help us to solve

  We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please help us solve this problem.

  Most likely, you will need to contact Adobe to reset your license.

  Contact the customer service

• ProBook 450 - second series of recovery media, blue screens windows 7 (win 8 okay, not the hardware problem)

  I had a new HP probook 450 G1.

  Immediately, I swapped the 750 GB for one SSD drive and tried to install Windows 7 from the recovery media. The operation has failed. Contact HP support, they sent new media.

  I used new media. Windows 7 operating system installed. As soon as I install the drivers, the PC goes in a loop of the blue screen.

  I can install the chipset drivers and wifi. Don't know what the other driver is causing the blue screen. I can also install from the windows media 8, so this isn't a hardware problem - wife hates just windows 8.

  Basically, please either give me a few troubleshooting steps or I'll go back to the PC. I'm NOT insterested in a manual process long to determine which driver is the problem and the recovery download media manually the drivers one... should work.

  After you have reinstalled the original 750 GB hard drive with the replacement media, I managed to an attempt to "recover". So, I decided to sit and try, by the process of elimination, all drivers.

  It turns out that the technology Intel Rapid Storage Technology driver was causing the problem. When I installed everything BUT that, the laptop works very well. Notice that I use a fairly new SSD Crucial of M500. It is quite possible there are other people out there see it. You really need to install the driver of rapid storage technology, it is fast enough - not not even 100% sure what good to give the driver.

  So I gave myself wrong guidance by the initial recovery of defective media. The second group of work recovery media, but the version of the driver intel 12.7.3.1001 does NOT work with the Crucial M500. I checked the Intel site for driver downloads, and it was not clear that they have a newer driver appropriate right now. Maybe someone else can tell?

• My computer keeps freezing online. Does not work why. It is not a hardware problem.

  My computer keeps freezing, when I'm online. It happens randomly when tube to navigate or go on you. This isn't a hardware problem (new processor etc) I ran the event viewer and stumbled on this... Product details: Windows operating system ID: 615 Source: Security Version: 5.0 component: security event log symbolic name: SE_AUDITID_IPSEC_POLICY_CHANGED Message: IPSec policy agent changed: %1 PolicySource: %2 %3

  Can anyone help?

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · The computer is connected to the network or the field?

  · You use internet explore to browse the internet?

  · If so, what is the version of the same thing?

  I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Support for Win 08/07/10 HID digitizer in 2013 to THIS

  My company manufactures panels touch OCAP using Atmel T series controllers.  One of our customers want to use our touch screen with Embedded Compact 2013.  THIS 2013 includes direct support to interface same USB HID digitizer that is taken in charge during the victory 08/07/10?  In other words, the customer can simply connect touchscreen compatible Win 7 in CE 2013 and it will work (assuming that the HID drivers are loaded)?  If not, is there an available I2C driver that supports Atmel T series?

  TonyG

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error message: since Windows was first activated on this computer, the computer hardware has changed significantly.

  original title: reactivation

  I just got this message: since Windows was first activated on this computer, the computer hardware has changed significantly.  Because of these changes, Windows must be re-activated in 2 days.  You want to reactivate Windows?  No hardware changes have been for a few years.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• The top of the invisible selected page size page in illustrator, what setting? This makes it very difficult to work. Is this a glitch/bug?

  The top of the invisible selected page size page in illustrator, what setting? This makes it very difficult to work. Is this a glitch/bug?

  It's a glitch/bug. Disable the GPU performance in preferences.

• Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  the imaging device is not on the list of the Device Manager... so I could not uninstall and reinstall the driver for the webcam.

  Help, please.

  Thank you.

  Hi NIKSY2K2,

  Please try to reinstall the Webcam Companion software by using the button help rebuild drivers for the camera.

  Nick-

• Diagnostic tool hardware problems on Satellite has detected memory

  Diagnostic tool memory detected in my laptop hardware problems. Now I don't know what part of the hardware's fault.

  Whenever I start my laptop after shoutting it down for some time, it appears failed early and repair takes place and start using the system restore that will come back at some point.

  Is that what this has to do anything with overheating?
  Please help me immediately

  > Diagnostic memory tool detected hardware problems in my laptop. Now I don't know what part of the hardware's fault.

  I would assume memory one or two failures of modules.
  I recommend you to check them both.

  Remove a module and try to use the laptop with a connected module.
  Then another module test. Make it as different memory locations.

  If two modules are corrupt, then you will need to replace both.

• Wireless - hardware problem?

  Hello world

  I have a laptop HP V3018CL. I have a wireless issue. I can not connect what either. But here's the weird part, I can't find my int Device Manager listed wireless card. I can't find in the Network Neighborhood properties. And the WiFi (in front of the laptop is sold red / (Orange)?) I'm not good with colors) (it was blue)

  I tried to re-install the drivers but without success. Can someone help me with this? What it means if the led is orange/red solid. And why can't find my device in the Device Manager? Thank you

  Sam.

  Message edited by SamNeddy on 02/11/2009 13:17

  Yesterday, I was chatting with HP support.
  
  It was the most frustrating conversation of my life. I told them exactly what I had done, the syptoms, everything and then the guy goes, we go just to install drivers. Even if I told them, it's a hardware problem, the orange light, the device, the update of the firmware Manager. All this fell on deaf years. It seemed that the guy knew nothing of the software support and read just via a script. arrrrggghhhhhhh! IT IS THE LAST TIME THAT I WILL EVEN INVEST IN A CV!
  
  so I just buy an adapter wifi for 30 dollars and call it a day!

• Satellite A200 reporting screens not correctable hardware problem blue

  My model Satellite A200 PSAFCA-01H00J is blue screening and reporting of a non correctable hardware problem. I disconnected all devices, including the mouse.

  All tests of memory and the device driver may report any problems. I unplugged and reinsert the two memory chips.

  There has been no hardware or changes to software other than Windows to auto update.

  This machine runs on Vista SP1. I dug the following message: Root cause found Bugcheck 124 unknown parameters 0x0, 0x95f7c3f0, 0xb2000040, 0 x 800. MSDN Info for this can be found at
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557321.

  Anyone know where I should look for this hardware problem?

  If you remove the second module of RAM is still blue screen?

  I saw 0 x 00000124 on a similar laptop and it was a problem of CPU.

• Analog multichannel peculiar read problem with PCI-6014 - hardware problem

  Hi all

  I see some very special behaviors with a 6014 when I do a multi-channel analog playback.  I am revamping of existing code to a customer, which implies the passing of the traditional DAQ in the DAQmx.  Traditional DAQ does not use a system based on the tasks, my client was in the process of reading clocked by the software for only one channel at a time, depending on what signal was of interest to both.  (application is a series of tests on a control PCB who will interface with some hardware, checking the answers and tensions and others)

  When I rewrote the application using DAQmx, I created a single task that contains all of the analog inputs of the map (AI0:15).  When I am interested in a particular signal, I indexed the channel since the reading chart data.  The strings that contain the actual data are 0, 1, 3, 4, 5, 6, 7, 13, 14 and 15.  All channels are NRSE.

  One of the signals of interest lights AI7.

  When I connect the AI7 signal with an oscilloscope, I read 2.5V - which is exactly what I expect to see.

  When I read AI7 using MAX, I read 2.5V.

  When I read AI7 by itself using a single channel DAQmx reading (i.e. 1 Samp 1Chan or 1Chan N Samp), I read 2.5V.

  When I read AI7 simultaneously with all the channels that have a greater number of channel (i.e. AI8-15), I read 2.5V.

  When I read AI7 simultaneously with any channel that carries a lower channel number (i.e. AI0-6), I read 2.34V.

  ?????

  For example, if I read AI0:15, I read 2.34V on AI7.  If I read AI0:7, I read 2.34V.  If I read AI7:15, I read 2.5V.  If I read AI7:10, I read 2.5V.  If I read AI6:7, I read 2.34V.  And so on.  Any combination of playback channel which includes results AI0 AI1, AI2, AI3, AI4, AI5 or AI6 during a misreading on AI7.

  All channels read because they are supposed to, no matter what channel is included in the job.  AI7 is the only one that illustrates this behavior.

  I wrote code for the acquisition of data for 10 years now and I have never seen anything like this before. The behavior is consistent.  I am sure that it is a hardware problem with the Special Commission that I use.  That's the advice of my customer, I don't know when they bought it, but I think they have had for years.  I doubt that ever, it has been calibrated.

  I guess it's more I'm curious than anything else - what on earth would cause this behavior?

  I'll tell my client to replace the card, if really I just asked my own knowledge.

  
  

• Hardware problem potential keyboard T410

  Hi all

  Since yesterday I was faced with a problem with my T410, which is potentially due to

  a problem of material with the keyboard.

  A few specific keys don't work anymore. These seem to be the key to turning the power on, the Fn key.

  the Alt Gr key and the ThinkVantage button.

  I guess it's a hardware keyboard problem, since I can't use the Power On button for

  start the laptop. Fortunately, it is possible using the marketing of the fingerprint reader.

  When the laptop is running (using Windows 7) everything works fine, except the cited

  buttons. I can't access any functions of the keys (e.g., the reading light) Fn or Alt-Gr symbols (eg.

  the symbol that is on my keyboard press 2 @) or power down with the power button.

  I tried various easy fixes:

  * By ensuring all drivers are up-to-date

  * Remove and replace the keyboard

  * Static discharge procedure (unplug all power, 10 presses and holding of 30 sec of power button / stop)

  Check the Bios settings

  * Replace the battery

  * ...

  Unfortunately, it has not changed the situation.

  I wonder if the simultaneous malfunction of these specific buttons pointing to a certain

  hardware problem. I hope a replacement of the keyboard can solve this problem, but it could be a

  problem with the motherboard.

  Advice would be welcome.

  Thank you

  HD

  It's hard to say, it could be the motherboard (more unlikely). But more likely it is the keyboard that plays up. The keyboard is least expensive to test for specific problems that you mentioned in the T410, so it's the most cost-effective test for fault case.

• I have a Server R2 windows 2012 automatically switches out of his own for several times and it doesn't look like a hardware problem.

  I have a windows server R2 2012 which automatically switches out of his own for several times and it doesn't look like a hardware problem. and I have this problem every day.please tell me what is the reason

  Original title: r2 windows server 2012

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• W700 touchscreen works do not (hardware problem)

  My Tablet seems fine, but I can't use the touch screen. The first time it happened it was December 18, and has happened for windows session. It seemed to be a stroke of luck.  Then I thought it was drivers or something.  I actually did a "System Restore" to 15.  When he returned to the top it worked.  But then it happened again... after waking up the next day.  Nothing to do with updates.  Now it doesn't work at all.

  Then it dawned on me to check my Android build on the same computer.  I also have an Android-AI as well as Windows boot - 8.1.  Of course Android also does not recognize the touchscreen.  In point 8.1 of Windows, in Control Panel configuration-system it says "no net or enter key is available for this view.  So this prompted me to stop fiddling with the drivers and updates since the site of Acer, Microsoft or Intel.  It must be a hardware problem.

  I am not under warranty:

  So I jumped the open machine.  I disconnected the battery for the whole night.  In order to get that I need to unplug the screen.  I fiddled with other things in there.  I was hoping that my violin would be reset some static or something that could be causing the problem.

  In any case... I need to replace? Or what could be the cause of the problem... Or I'm just watered... Doom just buy another device?  Just use it with bluetooth or wired usb things stuff?

  Normally, if there is a problem with the hardware with the touch screen it is the cable between the scanner and the motherboard. They come sometimes loose, causing the digitizer to no longer be recognized. If you have verified that carefully, and that the cable is not cracks or breaks, so it's going to be a draw upward, or the digitizer or the motherboard. Probably it would be cheaper to replace the digitizer to test, but you take the risk that it is the motherboard instead...