MCB2300 and PID

Similar Questions

• CVI 2013 SP2 and PID toolkit

  Just a question on the website documentation of OR:

  The announcement of the ICB 2013 SP2 mentions that the PID toolkit is now included...

  Looking for a CVI toolkit, the download page OR mentions a toolset PID 2.1, which, however, is supposed to work with Windows Vista/XP 32-bit/2000 only.

  So before you download and install I would like to know if it will work with Windows 7 and / or 64-bit?

  Thank you!

  Hi Wolfgang,.

  I have updated the download web page to reflect the operating systems on which the PID toolkit has been tested. PID Toolkit 2.1 (32-bit) is supported on Windows 7 32-bit and 64-bit OSs.

  Thanks for that bring to our attention!

• 5701na stream 7: Stream 7 Kionix sensors and automatic rotation

  Hello
  I have two tablets of 5701na 7 stream, that were running Windows 8.1.  I did a clean install of Windows 10 on both.  "E/s of sensor devices" section in Device Manager shows the device of the accelerometer is installed and functional.  "Sensors" section shows the 'Kionix Fusion of sensors' device, but this device is marked with an exclamation point, and indicates the status of the device that the "device could not start, error 10". "
  
  I tried the original commercial version of Windows 10 Pro N and the latest Version 1511.  I also tried the Windows 8.1 and Windows 10 drivers on HP website.  I tried various downloads of individual drivers (inf25 and inf24) and install the devices manually as legacy material.  Even when the devices appear to install correctly, 'Sensor of Fusion Kionix' device stop with error 10, usually in a few minutes.  And I tried all the combinations on the two tablets, just in case it was defective.  The two tablets were turning correctly when running Windows 8.1.
  
  Everything works as expected, including modes of Tablet and desktop computer and the Windows button that switches between the display of tasks and the office.  But in Control Panel-> display and in "all the settings-> devices-> display" settings there is no list drop-down or turn on or off for auto-rotation.
  
  I installed and re-installed the OS at least a dozen times, trying different driver combinations in different orders, but the sensor Fusion won't stay not just active.  Has anyone else had the same problem?  Windows 10 is better suited to the Tablet, and I'd be disappointed to return to Windows 8. 1.
  
  Thank you.

  Turns out be the version "n" to win 10.  The "n" version not supported the pilot of Kionix, while the "n" version is apparently not.  As far as I can make out, the "n" version does not install the required driver update framework.  The driver seems to run through all the options, but it is not actually install the driver correctly.  With a version "n" not to win 10, driver installation takes about 10 seconds, the part of driver framework seems not to be triggered and the package successfully installed / active detection devices.  If you plan to install Win 10 Pro, remember to insert EI.cfg and PID.txt files in your USB image, substitute the Win 8.1 home activation key which is burned in the BIOS.

• Yes... another question Win10x64 and iTunes (anyone listening...?)

  Googling... youtubing... reading the forums... Yes, actually it.  Even talked to some of our Windows 10 software engineers today to see if they might know... a few suggestions but nothing in Device Manager is hit so... here we go again from the top.

  ITunes sees the iPod but can not know what it is.  It does not list properly.

  A ran the diagnostics for connectivity, and it presents the problem

  Microsoft Windows 10.0 x 64 Home Premium Edition (Build 9200)

  Dell Inc., XPS 8900

  iTunes 12.3.2.35

  QuickTime is not available

  FairPlay 2.9.13

  Apple Application Support 4.1.2

  iPod Updater library 12.0

  Apple Mobile Device 9.1.0.6

  Apple Mobile Device Driver not found.

  Hello 3.1.0.1 (333.18)

  Gracenote SDK 3.06.1.3084

  Gracenote MusicID 3.06.1.3084

  Gracenote submit 3.06.1.3084

  Gracenote DSP 3.06.1.3084

  Connectivity device tests *.

  iPodService 12.3.2.35 (x 64) is running.

  iTunesHelper is not currently running.

  Service Apple Mobile Device Service 3.3.0.0 is running.

  No controller Serial Bus universal found.

  No FireWire (IEEE 1394) host controller found.

  Curious about the no controller found USB... dunno if that designated endpoint or the root.

  So I'll and load the driver by hand in C:\Program Files\Common Apple Mobile Device Support\Drivers where lives usaapl64.

  The VID and PID are o5ac/1266 and look in the driver configuration file, of course that is listed so... this driver supports the device

  So I'll and and update the driver for the ipod and navigate to the location of the driver above

  And I get an error indicating that the file does not have a compatible driver for the device.  Really... its in the list.

  The real problem seems that iTunes is not find USB controllers.  Though even the iPod is not connected, it MUST list the controllers.  But this isn't, is so logical that it does not find the iPod.  This is proved by running the same test on my win7 box, and of course it lists the USB controllers

  When to reinstall iTunes, right-click on the downloaded Setup and use run as administrator.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How can I connect PC to the PID block when there is no block to HAVE?

  Hi, I've just started using NOR-FBUS (NI USB-8486 with Configurator OR 4.1)

  for my device configuration, there is only block AO, tuberculosis, RB and PID.

  Question 1.

  Can I manually set SP in the Configurator? If so, can you please tell me how?

  Questino 2.

  I tried to follow the tutorial in the manual, but I did not block of I... so how can I

  wire of my SP to the PID block?

  Much appreciated,

  Thank you

  Hello

  Have Weiwei VALUE should follow the change in TB after adjustment. But you couldn't change it manually.

  Here, I've prepared a PPT on how to create a PID loop.

  FOR INFO.

  Good luck.

• Regulator PID that VI is not expected

  I am writing a multichannel PI controller using the PID vi (in the PID toolkit). All channels have the same point of setpoint, output range and PID adjustment of the values. In the help file for the vi of PID, he says:

  "The array instance DBL this polymorphic VI can be used in PID control applications multiple loops." In this case, the primary input array length will determine the length of the output array. Other paintings of entry need not necessarily to have the same length as the main entrance Bay. Other paintings of entry will be resized by this function for the same length as the table of primary entry as follows:

  • If the input array is longer than the main entry, the input array is truncated to the length of the entrance Bay. In the table of additional values are not used.
  • If the input array is shorter than the main entrance Bay, the last value of the input array will be repeated until the size matches that of the Bay entrance.

  In this way an input value that should be used for each calculation output didn't need to be specified in the array passed into this function repeatedly. Instead, the table can consist of a single value that will be used for each calculation output. »

  > I take this to mean that I don't have to laboriously repeat the same data for each channel; That is to say. I can wire a table 14 poles "process variable" entry of PID.vi but only for example number 1 on the set temperature etc. In practice, however, this does not work. See attached vi (NB this is not yet complete, so you can't run it!) and note the broken wires!

  Dave

  Hello

  The reason he has a cut wire is on some entries have that one value wherever the array type needs a picture on all inputs, even if the table has only one item! You can see in the code, I went back that everything I've done is but a building block to convert table effectively the type of a single variable in a table with only one type of data. I also had to change analog writing for multichannel and change the data type of the shift register, I presume this would be necessary.

  Kind regards

• setting pid, please check my vi

  Hello

  I tried to adjust the PID for the motor speed control...

  I tried the pid and pid adjustment auto...

  However, I can not set the parameters correctly... the system is responding well at all...

  If I get open loop frequency for the system.

  Auto-Tuning does not work, unless I manually do the noise factor to be close to zero... the wizard auto calculates the factor of noise to be ard 8 or 9...

  I tried also to increase the amplitude of the relays 1 to 2.

  IAM reading the data of speed by rotary encoders, connected to the BNC-2120 meter entry.

  the system runs very oscillating as soon as I apply proportional gain... does not respond well to control built-in or derived... and goes unstable...

  However when I faked the system, I have a pid for kp gains academic model 1, 0.001 Ti and Td 0.

  which model is used in vi and vi pid auto pid?

  is this academic model or other?

  Pls check that my vi attached to see if theres nothing wrong with the vi himself?

  Kind regards

  ruser

  Hi all

  Thanks for all the suggestions, I tried filtering... and internal dt feddback process is fast and therefore does not take much time... more than a few secobnds...

  I finally found the reason... the system is closed loop unstable in forward States and power feedback... Well it stabilizes, but after about 65 seconds which is once too large for the process to cling...

  Thanks a lot again...

  Kind regards

  ruser.

• I bought a Dell GX280 recycled / refurbished without a XP Pro CD and that you need to install IIS 5.1 and all of the other network extras fax etc. for managing my sites.

  The title could not manage my full question so this box just opened. I don't know how what I have already written will be seen when it's posted so I'll re - write some of the information. I have a XP Pro CD to a reputable recycler. I downloaded and tried to install the necessary files for IIS 5.1 as well as any other programs of the add-on requiring the OS to XP Pro CD. The XP SP3 ISO nor the XP SP3 exe have been completed contains all the necessary files so that I can intall manually add-ons. Several records were "broken" but still under consideration, did not contain files I painstakingly wrote down hand. After the cancellation of all the missing files, the installation program demanded the XP Pro CD ROM, and then he cancelled the installation after 3 attempts, over and over again! I need the XP Pro CD ROM! How can I get a? I have all the product keys and PIDs as well as the WGA validation validation active x.

  Please help me, I spent 4 days around the clock, install updates and the definations of viruses etc. on a slow dial-up access provider and don't want to be considered after putting so much work into this machine. Without the Add-ons, this machine is not better than my Dell XP Home edition!

  Please see: How to request a backup Dell drive

• When I try and get the Microsoft Messaging support, he asks me a 20 digit number. When I enter this number, he told me that he is not registered in the country I've selected.

  I have Dell XPS M1330 with windows vista home premium. When I try to get the support of e-mail on the microsoft support site, he asked 20-digit PID number, when I entered that number, it says this PID is not saved in the chosen country, I m from India, I chose India-English. I also tried in the United States, United Kingdom, but whenever he says the same thing. I can't support for the supplied windows pre-loaded with my laptop. I ve the product key and PID number. Pls guide me to do this, my windows is enabled.

  original title: Support of Windows problem

  Reference Dell are responsible for their OEM of Windows versions. Microsoft supports the commercial versions of Windows. I'm not familiar with the details of the software support arrangements, but it is the basis that applies.

  What is the problem?

• Download SN even with collector and CSV file

  Dear,

  What happens if I download the same SN device with the collector and then download again in the portal, but with different data

  Mahmoud,

  In your inventory, a physical device is identified by a combination of SN and PID.  If you do an upload later CSPC or CSV import of the SN/PID, but with different attributes, entry into the SNTC portal should reflect the latest attributes for this device.

  Bobby

• CC2014 and PHP files Dreamweaver renders do not correctly in the browser

  My old computer is Windows 7 with XAMPP 1.8.3. I now have the new computer with Windows 8.1 and I installed XAMPP 5.6.3.

  Everything worked perfectly on my old computer set up (and still makes). I did the local Web site of tests with virtual hosts set up for my multiple sites. It was fine.

  To the best of my knowledge, in the implementation of my new computer, I followed the same XAMPP set up and make the same changes to virtual hosting (1) file hosts (Windows/System32/Drivers/etc/host); (2) httpd.conf (xampp/apache/httpd.conf); and (3) httpd - vhosts.conf (xampp/apache/conf/extra/httpd-vhosts.conf).

  On the new computer Windows 8.1, XAMPP works very well. Apache runs on Port 80 443 and PID 1924 / MySQL running on Port 3306 and 2100 PID.

  I don't get the error messages. My "site1" and my "site2" servernames (etc.) pull up the correct Web sites...

  BUT - the website does not display well at all. It seems that it does not render the php "include" that I have in my php Web pages. The sites look good online so that there may be something wrong with the files on my laptop. (They are the same files php of my old computer Web site.) An example of a Web site is: "www.dm-webcreation.com"... It is in line, but appear badly on my new server local computer test.

  This new version of the XAMPP uses a different configuration?

  Live Preview without problem works... but when I view in a browser, it does not correctly.

  Can someone help me with this?

  Hey thanks for the help.

  I Uncomment the "LoadModule" that you referenced. He then started work in Chrome...

  But... not in Internet Explorer...

  Accidentally, I discovered a setting in Internet Explorer, which was not aware of... under "Compatibility view settings" - I unchecked the box "display Intranet Sites in Compatibility View '... I had no idea there was such a framework (I wasn't aware that look at one of my sites them was referred to as a 'intranet sites'). Once I unchecked, IE started working perfectly...

  Once again, thank you for your help!

  David

• Find my host PID of virtual machines VMware Server 2.0

  Hello!

  With VMware Server 1.x, it was easy for me to find which machine used what PID. I just had to connect to the web interface of VMware Server and voila I could see my names of virtual machines and their respective PIDs.

  Now with VMware Server 2 I can't find anywhere them in the web console of VMware!

  Instead I use Process Explorer (and market - I find that PID is related to computer)...

  Anyone has any idea where I can get this info quickly in VMware software/console/whatever?

  Thanx.

  Sorry, I was showing you the contents first to design you what you actually wanted.

  Try the attached vbs script that isolates the configuration file .vmx and PID for you.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• 5701na stream 7: Stream 7 & sp72220 Kionix G-Sensor Driver to

  Hello
  I've exhausted forums and the web looking for a method to activate the feature of merger of Kionix sensors on my two stream 7 tablets.  Everything works very well with 'Win 8.1 with Bing', but the sensors will not successfully install under Win 10.  I unpacked the SP72220 package and then unpacked the Installer "setup.exe", which contains the drivers/inf / files/reg entries etc. from batch.  But try as I can, the Fusion of sensors Kionix device does not start, instead, it reports an error 10 and remains disabled.  You name it, and I tried it.  I have re-installed the OS several times, and I've tried the drivers Win 8.1 as well as pilots Win 10.  I even downloaded several versions of Kionix and the Internet, always with the same result.  I also tried DoubleDriver similar to backup the drivers provided by a Win 8.1 install, then restore to a Win 10 install, but then again, the appliance will not start.  I really don't like win 8.1, but if the sensors does not start, then I might well have to go back to the operating system that is installed at the factory.

  Has anyone seen elsewhere this behavior, and if yes, do they have a solution?  Personally, I think it's something to do with exe or batch files in the package.  It took me a while to understand the parameters in batch files, but I think Miss me something with dpinst.exe, wudfupdate, mkdevnode, etc.  I'm really at the end of my patience with that, but the tablet will be pretty unusable if the screen does not turn.  I fear not install the drivers and the mods reg from the command line, if anyone can help with order of preference.  It's going to be something that the installer is missing.

  Thank you.

  It turns out that it was both "n" to win 10.  Any framework as the Kionix driver needed, simply was not available in the version "n".  The driver is installed around the silence, albeit with a prompt, box, but it finished within 10 seconds.  Previously, the box opens and you would see the framework for updated driver that passes through all the options, but not install anything.  So I'm done with Win 10 Pro 1511 February 2016, the MSDN ISO.  The only other annoyance was 8.1 Home Win activation key burned in the BIOS, which caused the Win 10 install to assume it was an upgrade of the home.  I created files EI.cfg and PID.txt and thrown on the specified USB port \Sources folder Pro with the VL activation key and everything has worked.  Thanks for the comments.

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• LabVIEW 7.1 executable on win7 64-bit

  Hello world

  I am currently working on a project using LabView and a PIC 18F2550. I am not the initiator of the project, I simply to continue the work already done. I had a problem, when I connect my camera using the PHOTO on my new 64 bit PC, it seems that the .exe file do not recognize my device, but windows doesn't. The pilots are microchip, so I guess they must be good!

  I don't know where is the problem, plus it works on my old windows XP 32 bit perfectly. Maybe because it's labview 7.1? On a 64-bit operating system? If I upgrade to a newer version, it will be good? If you do not, thing, it's a problem of my program? The VID and PID seems good and it works on another computer...

  Thanks for your help!