Mcc usb 1208FS for labview 10.0 connection problems

Similar Questions

• I have a HP Pavilion Elite m9280f PC, I replaced the case for a larger, having connection problems

  I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom

  Tomahawk, welcome to the forum.

  This is the page for Specifications of the motherboard of the computer.  You should be able to enlarge the diagram of the motherboard to locate most of the connections.  The only place you may have a problem is with the power button connector.  Some cases are not compatible with HP moterboards.

  Please let us know if this solved your problem or not.

• 1208fs for labview 10 usb connection problems

  Hello
  I'm relatively new to Labview and just improved labview 10. I used 6.1 before and had no problems using my mcc Board of 1208fs USB to run experiences before. I tried to connect even to labview 10 on my new computer, and the only thing that will connect to the instacal is. Ive plugged throu instacal, but is not visible in the list of I/O that selects the channel to use. Any help would be appreciated.

  Thank you!
  Andrew

  By the way, my os is windows xp

  Andrew,

  MCC daq devices have a different set of drivers for LabVIEW 8.2.1 LV versions and newer.  See http://www.mccdaq.com/daq-software/universal-library-extensions-lv.aspx this is ULx.

  I have one of the devices USB-1208 and discovered very recently this issue when I wanted to use it in a LV 8.5 application I wrote.  The new driver is actually nicer and DAQmx drivers a little resembles the way you use them.  While the former pilots of the Universal Library for older versions of LabVIEW looked like using traditional DAQ hardware drivers of OR.

• NOR-DAQmx 9.2.2 for 6251 USB works for labview 8.2?

  Driver download OR-DAQmx 9.2.2 USB 6251 work for labview 8.2?

  Thanks in advance

  NOR-DAQmx 9.1.1 was the last version to officially support LabVIEW 8.2

  NIquist: I'm a student as to why this KB seems to have disappeared in the air.  I can see inside, but not outside.  I'll update the post you linked when I tell me what's wrong.

• Video Jabber for TelePresence, VCS-E connection problem

  Hello

  I recently configured control VCS, VCS Expressway and TMS. Two VCS servers are software X7.2 and TMS is on 14.1.1 commissioning is configured between the VCS control and TMS, everything works OK internally and users can log in their Jabber client of telepresence video.

  When you try to connect via the highway-VCS I get the following question: "connection refused by the server. Try to connect again later"

  Area authentication is configured like this:

  VCS-Highway

  Sub-area by default: do not check the credentials

  Area Sefault: Do not check the credentials

  Crossing area: Do not check the credentials

  VCS-control

  Default subfield: treat as authenticated

  Area by default: credentials check

  Subarea: Credentials Check {area which movi users register to regex function}

  Crossing area: Do not check the credentials

  Search the rules between the two VCS game [email protected] / * / OK.

  The only port of the restrictions in place here are between the VCS control and VCS Expressway, outgoing ports open to the highway of the SANCTION.

  It seems to me that there is a connection problem, as opposed to an authentication problem. also, do I need to configure a SIP domain local VCS-Highway even if I try to proxy, registration to the VCS control.

  Would be appreciated if someone can verify my authentication area also...

  Thank you

  Simon,

  to do this, you re normally the area on VCS - C as "check credentials.

  If you want to proxy of VCS VCS-C-E records, you should not add the SIP domain name to the VCS-E.

  "Rejected by the login server" sounds weird in this case, however, could you share what you use for this deployment, the SIP domain name so that we can verify that your DNS SRV records are fine?

  -Andreas

• Management Pack for vCloud Director (vROps) connection problem / authentication adapter?

  Hello

  I'm trying to configure the Management Pack for vCloud Director (Cloud Management Marketplace |) Solution Exchange) and I seem to be having trouble with the simplest thing. I have the Solution installed and configured for most, but for some reason usually reach out and join the vCD server, or have a kind of authentication problems. When I test the map with appropriate powers (local and LDAP in vCD), I get the error:

  Cannot establish a connection on the target system. Logon failed! using Host = < FQDN > User = < adminuser > @System

  The adapter puts the @System after him, or is this something so simple, that I'm more thinking than he. I'd be happy to post any kind of newspapers if needed, let me know what you need.

  Thanks a ton!

  You HAVE to put @system, as it should work with or without. the base public REST API URL is assigned within vCloud Director? See the manual page, installation 28...

  Have you checked for ports Firewall open between the machine virtual analytical and vCloud Director host?

• What type of support for labview usb protocols?

  Hello guys I want to connect a device to your pc via a usb port and I want to use labview to analyze the data.

  But first of all, I would like to know what usb protocols support for labview.

  USB, USB CDC and other TMC?

  I ve read labview recognizes a raw device to the usb, but what is? Is it VI to read and send data, or I have to do? If these VI exists, they do the handshake? flow control?

  Thank you.

  Please read the chips and have a look at the USB specification (it is linked to in the nuggets).

  TMC, CDC, MAss Storage are all built on the basic USB protocols.

  LabVIEW has no built-in support for one of these classes of devices except Test and measurement.

  Shane

• Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

  I have connected a retina 12 '' Macbook to a Thunderbolt display via two adapters, and no video is coming through.

  Here is what I use:

  1 USB - C for HDMI: (Apple USB - C to HDMI adapter)

  2 HDMI to Thunderbolt (Monoprice adapter)

  Any ideas what's happening? The Thunderbolt display is without a doubt, since power is to come via USB when I plug my phone directly on the back of the monitor. The Apple adapter works because I could try to connect directly to a LG monitor with HDMI ports.

  The present model 2015 MacBook 12 inch Retina does not support the Apple Thunderbolt display

  what I read.  The other models Apple Cinema can work if they are used with correct adapters

  as other brands. Some adapters support the audio, while others do. Note there is

  limits for the specifications of display supported; This can limit their usefulness if it is not better configured.

  Special adapters and cables can allow to configure some display options for use with the MacBook.

  The graphical support through MacBook, MacBook Air, MacBook Pro varies with the specifications.

  The absence of a Thunderbolt port, use of adapters to provide only what it can bear MacBook 12 plug-in software component.

  and the mini-display port cannot connect or transfer at frequencies Thunderbolt usage views. The

  cure should be taken as built-in support for this; If the adapters could carry signals. A new model

  could understand such an improvement; but there is nothing of this specification in the Apple Store again.

  • Use 4K views and Ultra HD TVs with your Mac - Apple Support

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  • Get help with graphical problems on external displays connected to your Mac - Apple Support

  Good luck & happy computing!

• Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and IMAQ Cheers acquisition image vision module

  Hi, can someone give me some ideas on what type/brand of usb cameras are not suitable for labview? I need to use with labview and image acquisition IMAQCheers vision module

  Hi, I use a 1.4MP USB camera with LabView. The brand is ID - a German company.

• create the pwm with mcc usb signal 2408

  Hi all

  I want to generate a square wave of PWM adjustable frequency and factor market out of my usb usb MCC 2408-2ao module.

  I know thatI could use while loop with a sequence of plate inside to put on and off of a digital output on an ongoing basis and by changing the duration the sequence of flat images and the time between one and another iteration of the while loop I can vary heavy duty and often... but it seems a little tedious to do.

  Is there an automatic way to generate a PWM signal to measure and send it to the output of the USB module in Labview?

  Thanks for all your help!

  
  

• Transfer of files of arduino for Labview

  Hey.

  I do my b.a. in Labview using an Arduino 2560. The arduino controls a temperature probe, with 16 pixels.
  I made the connection with the microcontroller of the sensor, using I2C - bus. Arduino MI send via USB as a package of 16 bytes, that contains the temperature measurement.
  I have a problem with how I should read the transfer of files in Labview string text to table.

  I downloaded the Labview interface for arduino and have connection with Labview and arduino.

  I have searched the Labview interface for arduino modules but can't seam to find a drive bytes.

  The end result would be a graph of intensity which show temperature mearsurement.

  https://decibel.NI.com/content/groups/LabVIEW-interface-for-Arduino

• How to access any USB device in LabVIEW?

  I have Labview 8.5.It has a few blocks to directly control the port series, but I don't see ANYTHING to let me control devices connected to the USB ports. When you use the functions VISA the USB port is not available in the control of VISA Resource Name list. I have a device with a USB port. I would like to transfer data to and from the device via USB using LabVIEW.Does anyone has any suggestions for how I can access the USB port in a way that will allow LabVIEW communicate directly with the device connected to the USB port?

  Hello

  Looking on the USB communication with labview?

  You must first configure your VISA to recognize the USB

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  Here is a starting point...

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. I now want to import photos from my iPhone, but nothing works. Can someone, please?

  MacBook Air, OS X El Capitan (10.11.1)

  Honestly, this entire thread is a repost of this , I pressed "do not open pictures for this device" for when my iPhone connected. Now, I can't seem to find a way to import photos from that device because my phone is not displayed. Can anyone help?

  Still no answer...

  Have you tried the following:

  • Launch Photos manually once you connect your iPhone to the Mac.
  • Enter the ⌥⌘S tomato (command-option-S) key combination the sidebar visible.
  • Click on the camera in the sidebar when it appears.

  Your iPhone shows in iTunes or in the Image Capture?

  If iPhone doesn't appear at all, make sure it is properly loaded and unlocked, disconnecting, take a new photo, then reconnect it.

  • Start iTunes and confirm that you agree with the mac, the prompt on the iPhone.
  • Try a different USB port.
  • Try to force reboot the iPhone.

• Satellite Pro A100 with Modem USB internet connection problems

  Hi all

  I'm looking for some help with a problem. I am struggling to solve. I have a Satellite Pro A100 and sometimes use it with a speedtouch 330 what ASDL USB connected modem, but whenever I use this at some point that I seem to lose connectivity, the Explorer does not display the pages and other applications stop working, even if I do not seem physically the connection loose. It is often the only to get back on the net to restart and start over.

  The modem doesn't seem to be the problem as it works very well with my desktop and the laptop works very well when it is connected through wireless and idea and solution would be greatly appreciated.

  Sean the Bear

  Maybe you should take a look here in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31982&TSTART=0

  There is a user who uses the same modem SpeedTouch 330 USB on laptop with Vista OS.

  You will need to install compatible drivers on the site of modem manufacturer.