MCU migrate Server TP

Similar Questions

• Migrate server DHCP static leases

  Hello

  We currently use an old Mac Pro as a DHCP server, use the latest version of server of El Capitan. Now, we want to copy all the static DHCP leases we have implemented (approximately 120 static leases), so that we can put them on another Mac mini, this time takes up half of the leases for a different subnet.

  I know that the DHCP leases, temporary positions, are saved in a file that you can delete to erase the leases, but I have not found where static leases are saved. I know that you can change in the Directory Manager application, but I need to export them somehow, so that we can easily migrate. A Time Machine backup is not an option.

  Thanks in advance!

  See you soon

  Apple's DHCP server configuration file is /etc/bootpd.plist

  The file you're looking for is/etc/bootptab , but it is also possible to set static IP cards in Open Directory itself in the computerssection. If a card is defined in/etc/bootptab it takes precedence over the setting in the Open Directory.

  You can perform the following operations in Terminal.app to get more information

  Man bootpd

  bootptab man

  The file that contains the list of active leases is/var/db/dhcpd_leases

  It's a little ironic that Apple uses the name dhcpd_leases dhcpd is a different program from the competing DHCP server to the bootpd use of Apple program. Bootpd Apple is highly personalized on the original version of the open source to add for example the NetBoot support.

• Migration server VCentre

  I have a virtual Center Server and Update Manager installed on a physical server to Win2k3. This server gives clerical errors frequent if I want to install VC and Update Manager on different hardware. I'm fine with the installation, but what I / a backup copy of the old server so when I connect to the VC client I see my host ESX Datacentre and associated VM listed. If I understand correctly, when you install the VC server from scratch on another server, there is no data centres or host listed when you run the client. So, I just want to know where that data takes place so it can be copied back.

  Also, I want to patch the old server backup repository and restore it on the new server. What is the best way to achieve this, copy files etc or some kind of backup on the old server method?

  Execution of ESX3.5 4 and VC 3 updates

  Any help would be appreciated!

  don't forget to award points by scoring responses like 'correct' or 'useful '.

• Migration server VM to a larger disk on the same host

  All,

  I need to move one of my virtual server from its current partition to a larger partition on the same server. I would like to know how can I do for this. also, once the server is moved, I will be able to increase the comments Server physical disk space? Your suggestion is highly appreciated.

  Thank you

  Emmett

  If I understand correctly what you want to do:

  -Stop your VM

  -Shut down your virtual machine

  -Move the folder of your virtual computer to another location

  S ' register or open again your VM

  Good bye

  Riccardo Riva

  VCP, RHCE, FCNSA

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '. Thank you!

• problems of migration between 4.0 and 4.1 and vpshere different server platforms

  I'm having a problem with my migration between vsphere 4.0 and 4.1.  to complicate matters, we are also migrating server chassis.   The migration of chassis is made for FT.  We discovered when planning for FT consultants, we used initially to configure the cluster FT, specified servers and chipsets that were not capable of FT.  They were Intel Xeon 53xx series.  I use the PowerEdge 2950 servers, those with the xeon 53xx was Gen2 and I am replacing them with PE 2950 Gen3 with proc Xeon 5430

  The problem, I'm running is now that I put in place a PE 2950 Gen3 in the cluster, I cannot vmotion for her.   Whenever I do, I get the following error:

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of host: 0000:0000:0000:1000:0010:0000:0001

  required: x 000: x 0 0x0x:00: 0xx0:xx10:xx1x:xxxx:xx01

  Inconsistency detected for these features:

  * SSE4.1

  If possible, use a cluster with Enhanced Vmotion compatibility (EVC) enable: see article of the 1003212.  In the absence of EVC, see 1993.

  the thing is that I can't seem to activate CVS as options I selected do not include processors that I have in my servers.  all processor options don't list any of my processors.

  I tried seting the mask CPUID 1 VM and migration, which worked, but is completely unrealistic, because I have to stop every VM to do and some systems that need to migrate are essential.  I tried setting the mask corresponding CPUID at the host level and who does not at all.  I must have missed something simple or fell on a rather massive bug!

  help please!

  Then I suggest VCA as this will take care of him for you.

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• 5320 MCU software update 3.1 TS

  We currently have 5320 MCU running version 4.5 (1.45). I see that Cisco offers code TelePresence MCU server:

  http://www.Cisco.com/c/en/us/support/conferencing/Telepresence-MCU-5320/model.html#releasenotes ~ rdtab1

  Looking at the release notes is not very clear if when running 3.1 GST in MCU we will lose the ability to "Téléprésence MCU" in CUCM to use this 5320 MCU for Ad - hoc conferences.

  I know that GST 3.1 does not offer this possibility, but if you look at the file name for the MCU is cisco_ts_3.1_1.98_for_mcu_5300.zip (32,04 MB) vs GST 3.1 cisco_ts8700_3.1_1.98.zip (26,24 MB)

  Thank you

  If you upgrade your 5320 MCU with the telepresence server migration software, it will transform the MCU in a server of telepresence for all functions and features will be a telepresence server and not a MCU.  See the Software of TS running on MCU 5300 Series installation guide on how to convert your MCU to a telepresence server, if you are interested.

  Here are two good discussions comparing platforms MCU and telepresence server, one of them specifically on migration from one to the other.

  What-difference-between-MCU-Cisco-Telepresence-Server

  Why-Replace-MSE-8510-MCU-44-Telepresence-Server-31

  The cisco_ts_3.1_1.98_for_mcu_5300 software is for a series of 5300 MCU migrating to a server of telepresence.  The cisco_ts8700_3.1_1.98 software is specifically for the hardware already running a TP server software, such as the various servers of telepresence models listed here, this includes MCUs migrated to the server TP as the 5300 MCU to MCU MSE 8510 series software.

• SBS2011 Server 2012

  I've been looking for a SBS 2011 Standard on the migration Server 2012 Standard document and not having not much of chance.

  Is anyone aware of any restriction/warnings to know.

  I guess the SBS server will check hourly so are has the FSMO roles - and is not - stop moving roles FSMO would be the last step. However, added a current standard server 2012 in the field as a secondary school for AD/DNS etc - is that this will cause problems - such as the closure of 28 days rule?

  The main reason we want to have the new 2012 standard servers in the field is to start migration from other servers such as web services, etc. off before moving to the Exchange and the sides AD things.

  Any help is very appreciated.

  Hello

  SBS Server is not supported in these forums. I suggest that you ask your question in the forums from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads .

  Thank you.  :)

• Can I move datadrives from a Windows 2003 server to a windows 2008 R2 enterprise server? Both servers are edge power Dell T610

  We are migrating Server 2003 to 2008 R2, Enterprise Edition.  I have the OS loaded and ready. However, the Server 2003 has almost a 1 TB of data, that I just wanted to know if I can get the readers in the new server and everything would be ok. If readers present themselves as foreign, it can be fixed, but I'm worried how 2008 will see readers.

  Thanks in advance.

  Jeff L.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to check the number of servers, a unique summer migrated database?

  Is it possible to check the information of the previous server where the database has been migrated.

  Ajay Vijayan wrote:

  The binaries have been transferred from the old server and grid has been installed in the new ASM migration server.

  Alert log is purged according to police.

  Ajay

  1. logically, it can not be followed from the point of view of database. Since when we migrated to new server we can just copy the data files and take the help of rman and migrate (hope you are aware)

  2. If we are not reset all the newspapers during the process, if we do it due to a problem we knew that the level of incarnation (date/time)

  3 database does not take care of these information

  4. perhaps there is an alternative, you can get it from 'DBA_HIST_DATABASE_INSTANCE '.

  that keeps INSTANCE_NAME and HOST_NAME... .When you database runs from host A for 6 months and then you moved to server 'B '.

  5 to start and next stop he will track this new server (provided during migration if you have made a rebound at this time, then you can have alteast moving day)

  6. IF you are looking for server then in the course of the interview you can bounce while patching so separate hostname is able to follow

  -Note - rest depends on the number of records that he takes for his life

  It may be useful

  -Pavan Kumar N

• Migration of ADI to Web ADI for EBS R11.5.10.2

  Hello community!

  It's my first time here in the MOC, I'll wait for you can help me.

  We strive to migrate to Web ADI ADI. Currently, we are in an analysis and test initial stage, so we have to show the feasibility of a migration.

  As a first step, our goal is to go and live with integrity between Web ADI and Integrator GL & f models.

  Our version of the EBS product is R11.5.10.2. Our operating system is Windows 7 with IE 8 and we are using MS Office 2013 32bits.

  So far, we know that there is a patch to apply due to the compatibility between EBS R11.5.10.2 and MS Office 2013 32 bit (I read the Doc ID 1077728.1() [7 ORS 11i (Patch 11i.ATG_PF.)] (H.Delta.7) users must apply Patch 18402183 following its readme]

  We need to know if a person made this before migration (from ADI to Web ADI R11.5.10.2) and what issues/patches you have.

  Please help us!

  Mauro

  Please consult the following documents (including those under the REFERENCES section).

  What customers have to migrate Server Adi WebADI and Report Manager? (Doc ID 458589.1)

  Installation, configuration, and troubleshooting Web ADI (Web Applications Desktop Integrator) (Doc ID 417692.1)

  Thank you

  Hussein

• ESX 4.0 to ESX 4.1 - migration

  Guys,

  I have ESX 4.0 and Vcenter 4.0 in my environment. VC server is windows server 2003 64-bit and oracle database. I have to migrate all my hosts ESX 4.1 and I think that I have to migrate VC also to 4.1.

  So my question is how can I migrate Server VC 4.0 Server VC 4.1. After that I have each of my guests migrate from 4.0 to 4.1 using of pre and upgrade.

  Please help me if I am wrong in my plan. I have to migrate, but never did before. Thank you

  Migration paths are documented in http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  For vCenter, you can make simple upgrade: install the new vCenter, use existing DB connection and there will be an upgrade.

  Then switch VUM to 4.1 and use it to upgrade the hosts.

  André

• Purge schedule on the TMS/TMSXE

  TMS is 14.3.0

  TMSXE is 3.1.2

  We gave up on the recording of our telepresence on the CUCM, we work to keep away them from the CUCM and their inclusion in the VCS - C (see here). But when you remove the CUCM non-registrant endpoints off the TMS and add it as registered endpoint C - VCS, TMS causing problems on all scheduled meetings.

  After the now the rebinding VCS - C saved telepresence endpoints for room calendar changes in the TMSXE, it

  1. Add the 'new' (actually modified) end for the calendar of meetings
  2. maintains endpoint (previously saved CUCM) former listed as a "shadow" unknown endpoint
  3. clear the multipoint resource MCU/TP server allocated meeting
  4. send an email to the host of the meeting, saying: "information your administrator is migrating to a new system of conferencing reservations." During the migration, your conference was made. Cautions due to limited resources of routing, automatic routing could not be set up for your conference. A participant dial-in/out external added to the call is not connected. To ensure that the Conference will connect and the delivery of resources are available, contact your administrator to videoconferencing. Road is not valid.

  But all meetings are internal, and there are many resources available on the telepresence Server

  I wonder if there is a way to solve this problem and what we should do. Is there a way to purge all the TMS meetings so that the TMSXE re - synchronize all the information meeting of the TMSXE.

  Hello

  There is unfortunately no history of migration in TMS between a CUCM-centric and a deployment centered on VCS. If you make a change like that, you essentially need to manually update all future bookings.

  Kind regards

  Kjetil

• Strange timing errors, python process taking CPU

  I have 5 Server freshly moved on top of Yosemite.

  I migrated Server 3 to 4 and now 5.  My sites all done.  My e-mail service is very good.

  I've never used the calendar service, and used to spam my system with Dingo errors log in Server 4.   I thought it would be fine in the Server 5 because 5 fixed issues for many in the nets here.

  Not for me.  So I tried to turn it on.   I get this error in the calendar error log:

  2016-02-14 22:45:25-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  2016-02-14 22:46:20-0600 [---] open journal.

  2016-02-14 22:46:20-0600 [---] ControlSocket go from ' / var/run/caldavd/caldavd.sock'

  2016-02-14 22:46:22-0600 [-] [txdav.base.datastore.subpostgres #error] unable to connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 22:46:23-0600 [-] [txdav.base.datastore.subpostgres #critical] cannot start or connect to the postgres: md5 password authentication failed

  2016-02-14 22:46:23-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  Is it possible that I can delete calendar and let app Server make it fresh?  I will lose no data because I've never used.

  During this time, my server otherwise happy is stuck using 9% CPU for several treatments Python and postgres continue taking up 100% CPU when I look up there.   How can I go back factory calendar?

  The caldavd_setup.log is trivial and seems that everything worked until the end.

  14 February 19:53:50 [CalendarServerCommonSetup] successful Serveradmin

  14 February 19:53:50 [CalendarServerCommonSetup] call fix-permissions

  14 February 19:53:50 [CalendarServerCommonSetup] calling calendarserver_upgrade - postprocess

  14 February 19:54:01 [CalendarServerCommonSetup] out of calendarserver_upgrade: 2016-02-14 19:53:53-0600 Converting augments.xml

  2016-02-14 19:53:53-0600 root ACL:

  2016-02-14 19:53:53-0600 Nav ACL:

  Created the directory: / var/run/caldavd_requests

  2016-02-14 19:53:58-0600 cannot connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 19:53:59-0600 may not start or connect to the postgres: md5 password authentication failed

  Failed to start the service.

  14 February 19:54:01 [CalendarServerCommonSetup] send to serveradmin: calendar: command = exportPushCertificates

  14 February 19:54:01 [CalendarServerCommonSetup] output: calendar: exported = 'Yes '.

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.agent

  14 February 19:54:01 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.relocate

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.archive

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] run: / bin/launchctl start org.calendarserver.agent

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/Library/CalendarServer/Setup/Calen darServerLogRotationConf

  14 February 19:54:02 [CalendarServerCommonSetup] Service has not been activated previously

  14 February 19:54:02 [CalendarServerCommonSetup] out successfully

• Help! Necessary to allow the call in our system, we may not know

  Here's the context:

  I am a tech who was hired to take over for a guy making stuff IVC for virtually his entire career.  He left things in a bit of a mess (no one was allowed to touch "his" equipment, so no one here can help with patterns as they are all used for Polycom and never touched the things T berg I for my Department).

  I'm just getting started in the field of the specific CFI and think I no longer understood.  I'm pretty much familiar with outside edge 95 MXP and 6000 s that we have here, and I crawled around in GK and the BC we have and I am confident that things work well and I know that most of what is what and how it works.  A week after I started, Codian MCU 4210 we had died (there is no configuration file not registered nowhere and there are no impressions by - the settings tab), so I rebuilt using the Codian help website.  Our current facility is some 95 MXP, 6,000 s, a GK Tandberg, Tandberg BC, a TMS and a Codian MCU 4510 Server (we have upgraded after the 4210 died).

  The problem I have is that our MCU can yell to the other participants in many other places, but for some reason that I can't seem to call for a conference that I put in place.  My predecessor had put the things down and would not allow upcoming calls.  Only outside.

  In any case, I would like to know if anyone has any advice on what I should look for to which release.  There is no sense for me to have locked down it tight.  It makes more sense for a party that disconnects to be able to try to reconnect on their own instead of my technicians trying to recall.

  Anyway, any help/pointers would be great.  Let me know the info you will need.

  Thank you

  Luke

  Yes, that seems correct.

  Depending on your network media traffic configuration will change also.

  Before the media could have endpoint to endpoint, with vcs-e and h460.18/19

  you will have the vcs e hairpin.

  We have style Codian MCU running on a public ips connected to vcs - are and it works fine.

  But you must have media ports will also be open to the public internet.

  It should always be possible to use your gk (at least if its on the newest software WinCC and vcs to build an area,)

  but then, you're part of the show of your old

  But I have not tried that for a long time if I'm not sure how that works with the current vcs release.

  Please remember useful frequency responses and identify useful or correct answers.

• Operations Manager vCenter don't watch do not work load Matrix on 1 of the 3 ESXi servers

  Hello

  
  I need help troubleshooting.  This last weekend, we have improved our main router of L3, which caused a tizzy with networks (duhh!)   After the task was completed, operations Manager (5.7.1) stopped making account CPU on one of the three hosts ESXi (5.1.0, 799733).  vSphere sees all data (CPU, Mem, network) of the ESX host and DRS works.  I have logs of the hosts on the migration server.  So, how do Ops Manager report correctly for this server?

  

  Thank you

  Brian...

  See #1 in my recommendation... vSphere could bring their stats, but you should check vCenter to see if vCenter is bringing.