MCU4500 series and Polycom HDX broadband bandwidth interop

Similar Questions

• Replacement screen series and dv8 HDX

  If one went to e - bay there are all sorts of 18.4-inch screens that fit on these models. These screen are screens of brand such as Samsung, Toshiba etc. The downside is that the screens are held in place with acrylic adhesive tape double-sided, which I'm having a very hard time finding. Most of what is est.8 millimeters thick, which is a bit too thick.

  It should probably be around.5 mm.

  I found this product, but there is next to no information on it to the thickness is.

  http://CGI.eBay.com/Scotch-3M-heavy-duty-clear-mounting-tape-4010-1-Pack-/180608206139?PT=LH_Default...

  The original stuff that was in those laptops was gray, but clear would work. Someone even suggested to use a woven carpet adhesive, but I fear that it tends to crawl.

  All the suggestions here would be greatly appreciated.

  Thank you

  Problem solved, after several hours/days of searching I found this from these people:

  http://www.tapekits.com/ProductDetail.asp_Q_catID_E_102_A_subCatID_E_119_A_productID_E_194

  They ship to Canada, and the US and I could buy a small amount. The smallest amount was 72 yards to about $ 80.00 everywhere else.

  .5 mm thickness, and after carefully measuring, it should be perfect.

  The stuff is incredibly strong, as it is intended to replace the screws and rivets.

• Static severe Audio connection endpoint Polycom HDX series

  Greetings,

  I'm looking for ideas on the question.

  We experience severe (and immedate, connecting) levels of static audio when Cisco (SX20 or C40) endpoint connects to a Polycom HDX endpoint.  Cisco endpoints are running TC7.2.1.  This doesn't happen when you connect between Cisco endpoint to an endpoint of Polycom VSX.

  If HDX endpoint connects to a Cisco endpoint, in addition, there is no problem.  This only happens during a call from Cisco to HDX endpoint.  All connections are made via H.323 SIP not.

  All units are stored on the same device of control VCS.  VCS rolls X8.5.1 and shows no errors or questions.

  Any thoughts would be appreciated.

  Thank you

  -TM

  This is a bug in TC7.2.1

  See here

  CSCuq94402

  CSCur78783

  Symptom
  Get a white noise for audio and not video

  Condition
  Use TC7.2.1 and Polycom with software version 3.0.5 and call using H323 with active encryption.

  Workaround
  Disable encryption, call using SIP, downgrade from TC7.1 or earlier version of Polycom or wait for TC7.3.0 and xConfiguration H323 1 encryption KeySize value profile: Max1024bit

  We have disabled encryption until TC7.3.3 is released.

  7.2.1 is originally models C20 revive the call

  7.1.4 has vulnerability shellshock

• Cisco MCU 5320 and Polycom vsx

  Hello!

  I have the problem with these devices. Content does not work properly. MCU push content to the same protocol with video endpoint vsx h.261. If the quality of the content are very poor. Is - this intraoperative problem or a software problem?  any other point endpoint it works very well.

  Hello

  You have basic Mode activate on your Polycom endpoint?

  Try to do either disable or enable basic Mode in your devices of Polycom, just to see if you get different behavior. You can find the slot configuration system > admin settings > network > call preferably.

  In addition, the date of issue for MCU version 4.4 indicates some interoperability issues with Polycom HDX endpoints when using content with H261 Protocol, do not know if this limitation also applies to the VSX series.

  In addition, I suggest you check the documentation for Polycom to check if the VSX endpoints are able to share content using protocols H263 or H264 instead of H261, also check if there is some version or configuration required to enable it.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Cannot start a video call with the polycom HDX 8000, SX20

  Hey,.

  I'm in big trouble, I sx20 cisco but it cannot call for polycom HDX 8000, when I'm composition video call only he it automatically connects audio call.

  Kindly help its very urgent.

  Thank you

  The reason behind the audio call could only be polycom HDX endpoint is defined on the base line or the basic mode respectively.
  The only resolutiom can be off the base line or the basic on the polycom endpoint mode to activate the H263 and H264 video Protocols.

  Hope this can help solve this problem.

  Envoy
  Cisco support technique Android app

• Cisco-AIR-SAP3702I-A-K9, max and the degradation of bandwidth users?

  Hello

  Sorry if somone is asked this question before, but I was unable to find the answer or by mail.

  So here's the intro:

  Symthom:

  I installed and config with a 1240 AP G base still running the office to provide wireless connectivy, but users complain its slow.

  Note: I went to check the PC users and a simple website with some pictures or even to test the connection speed, it is so slow

  Action:

  I changed the AP with a new AIR-SAP3702I-A-K9, just basically, I copied and pasted the config by applying appropriate measures, like changing the fastethernet gigaethernet, etc..

  It has improved a little, but I followed the PA and there are 3 SSID. each SSID was like around 6 users, for a total of 18 users.

  Results:

  Sound still give the same results, he suddenly became so slow but sometimes its execution by the customer well, but relatively slow always.

  ******************************************************************************************************************************************************

  Additional information and troubleshooting of the measures taken:

  We have 100 Mbit/s, so its quite a lot of bandwidth and we use even to an all-time high of the day around 35Mbps. I went to test my PC local, changed to vlan and use the same vlan as the SSID to establish a speed test and I got about 98 MB/s and ping results is 2ms.

  So that tells me that it is not the internet connection I have download file size of 2 GB in a couple of minutes cable using the same subnet, but in the wireless, it says it will take 2 hours to download a file of 200 MB in size.

  I know that it is a shared, but I need more information that I'm not an expert in configuration or give a good explanation as to why the wireless is so slow.

  I'm always conflicted with my classmates because they say that it is the access point, and that I should try only on PC wireless on the AP and check the results of the bandwidth.

  They say I should get 100 Mbps

  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

  Help in the following:

  Who can tell me what is the maximum number of clients by this type of device (3700 AP series) or recommended?

  Can what kind of measures I take to reduce this problem?

  Who can tell me what is the bandwidth usage max for this AP?

  They are correct, as if the AP with a connected users, should get the same huge amount of bandwidth or would be less?

  Is it true that if a user is streaming and others want to suft normally, it will reduce the bandwidth?

  What is the bandwidth max an AP can use or by customer taking into account that we have 100 Mbps?

  Location: it's just a simple room with the inside AP, nothing special.

  I've included the AP basic config. Any additional info, please let me know,

  Here is the test that I made using the local wired in the same subnet as the SSID and I get good bandwidth.

  

  Thank you very much!

  Hi Alex,

  1. first of all, a rule, you can use 25 users in a single (). If there is a normal traffic such as e-mail...).

  First troubleshooting:

  you use wpa version 1 for all SSID. You must use WPA version 2 to get 802.11n rates (Higher).

  So I'm changing your configuration, please check.

  Concerning

  Remember messages useful rates

• Problem of update of the directory between TMS & Polycom (HDX, VSX)

  Hello

  We have deployed MSDS and other cisco devices in a business.

  The company already has several devices of Polycom (HDX (3.0.5), VSX (8.5.3)) and we connected those to TMS (14.3.1) for the Organization of directories.

  Everything looks very well, we were able to see the directories of TMS on Polycome devices

  However, the question comes out when we update the directory.

  Any change of MSDS, these devices of ploycom updated their own changes meaning TMS and devices of polycom is interoperability.

  But when it comes to avian (GDS) directory, we find no changes to this directory, even its own changes.

  And these changes are correctly updated for Cisco devices.

  For example,.

  We have 1 HDX, 1VSX, 1 SX20 and MSDS.

  We changed the names of these three system with TMS.

  You could see the name changed in the information system on all devices category. (Even devices polycom names have been changed in this category)

  But if I go to GDS (Global Directory) in Polycome devices, there is no change. It comes even as before. (Even the name change itself)

  I want to ask:

  (1) why this has happened?

  (2) what can I do to fix this?

  Reference the following default:

  CSCuj42053

• HP Pavilion DM3 1100: HP DM3 1100 hybrid series and Windows 10 compatibility chart

  Hello!

  I am running W7HP x 64 on my DM3 of Pavilion with hybrid graphic system (Mobile Intel 4 series) and GeForce G105M. I'm worried because I'm not sure that the hybrid function works - which means that it will pass graphics cards according to the source of power and power management.

  Can anyone confirm that the hybrid function works or is there any other app/trick/hack that I can use? I need discrete and integrated graphics to work when I'm connected to working with graphics applications (editing photo or 3D modeling light).

  1 million thanks!

  Scratch higher response! I did the job! I downloaded driver win 7, began the installation so that the files were extracted to the SWSETUP folder, leave the installation to finish in normal mode (no compatibility mode). At this point, there is no difference. Then I restarted my laptop and opened Device Manager and updated the driver manually selecting the inf file in the subfolder SWSETUP. I then did a bit of fiddling around with deactivation and activation of integrated graphics card Intel and all of a sudden, the LED TV light on and there was the desk! Although the resolution was not standard full HD, but something more small to 1680 x 1050. Disconnect and reconnect the HDMI Cable causes the actions required, which means that the laptop screen turns on and turns off properly.

  I hope it'll work with my desktop LCD screen to... :/ Will report!

• VISA series and the time elapsed in a timeout

  Hi people,

  Still new to LabView, please bear with me...

  I have a VI that is sitting and wait a certain string of characters arrive on the port series, but I need a timeout that is not based on the VISA expiration time.

  I expect a bunch of text via the serial port for ~ 45 seconds, then my input string will compare the matched string and move to the next VI.

  In case of no matching strings, the serial port can continue to send data serially, or may be inactive (no-determinisitic because this test is to see if a computer system started successfully). But once the VI starts, I should have 60 seconds to find the match, or set the bool 'selection' to fail.

  I tried to put my loop of time inside the main loop, outside, with or without SRs, and now I am at a loss. I looked at the VI has highlighted and the serial activity is active the timer has expired for 60 seconds.

  Please take a look at the joint and thanks for taking a peek at this post.

  I'm not entirely sure I understand what you are trying to accomplish. However, here are my thoughts:

  1. You have attached the VI waits 60 seconds before checking the serial port for waiting bytes ONCE then read bytes if available and leave immediately. It's because you have while the loop around the elapsed time and it should run completely before moving on to the serial communication loop.
  2. I assume that you have configured the port series and characters of endpoint set, etc. in a main vi
  3. Please try the VI updated seal and let us know if this helps

  Thank you

  Charles Chickering

• Adding the Polycom HDX to the TMS system

  How can I add a Polycom HDX system in TMS to manage?  What, if any configuration on the Polycom system must be made, or in the TMS?  Can't seem to find any documentation about it.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/interoperability/Cisco_TMS_Product_Support.PDF

• 800 series and VPN

  Hi all

  I have searched high and low for answering this question and came from far away confused.

  Should I DMVPN in order to use a VPN endpoint behind a perfomring NAT router?

  ISP---> Internet router---> 800

  In addition, if the answer is no, then can al of the 800 series and soho routers support this?

  I appreciate really all help with that.

  I'm glad to hear that.

  If you have any other questions, let us know

  Please evaluate the useful messages.

  Federico.

• Back on the cisco ASA 5500 series and PIX 500 series

  Hello

  I fund a site www http://www.searchsecurity.de/themenkanaele/plattformsicherheit/schwachstellenmanagement/allgemein/articles/106752/ (only in German). I have read that it is possible to make a denial of service on cisco PIX 500 series and series 5500 ASA, when the TTL value is enabled.

  How can I check that? or solve the problem?

  I thank you,

  Mary

  What version of the code you run the Pix or ASA. Refer to the "Products affected" section for more information on versions and the products concerned. This should point you in the right direction.

  Also, listed in the URL is bypasses and fixed Versions that you may want to check.

  Kind regards

  Arul

• Question on the hose and subarea total available bandwidth

  Hello

  I know that the pipe is restricting bandwidth under a link, for example if a have a pipe = 768kb of subzone1 to the subarea failing.

  and I have the piping of the subarea 2 = 512 KB and I have available under subzone2 = 384kb totalbandwidth first call for 384kb and I want to make a second call? is it possible or not? What bandwidth is to take the exam?

  I need clarify this concept,.

  Thank you

  Carlos

  Hello

  In this case, the limitations will be considered, but minus the value will raise the effect indeed. To take your example:

  SubZone2 (total bandwidth: 384)

  ||

  ||

  || Hose to DefaulSZ Sub2 (total bandwidth: 512)

  ||

  ||

  DefaultSubZone

  When you make a call to 384 kbit/s from SubZone2 to DefaultSZ, VCS will deduct the bandwidth in SubZone2 384 and 384 of the bandwidth in the pipe. So you have only 128 available in available in the SubZone2 pipe and 0. Therefore, when you make the second call of the subzone2, VCS refuses the call and it even will not consider the banwidth available in the pipe, because the appeal has not reached even the hose, once he has yet come out of default subfield.

  I hope this helps.

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• I just my series and it says it is invalid? (Adobe Standard DC)

  I just my series and it says it is invalid? (Adobe Standard DC)

  Error "serial number is not valid for this product". Creative Suite

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  http://helpx.Adobe.com/x-productkb/global/find-serial-number.html