MD101LL/A + 2SSD + 16 GB of ram with the hiccups

Similar Questions

• Can I use PC400 RAM with the Tecra A4 (Pentrium 750)

  Can I use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.

  Thank you

  I put t know if you can use but AFAIK Toshiba recommends using these modules on the Tecra A4:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here are the modules of single channel 166 MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM.

• Libretto U100: Creating an SD ram with the Boot Toshiba utility bootable

  I am trying to create an SD card bootable ram using "TOSHIBA SD Memory Boot Utility".

  I don't have a floppy drive, so I use image img/vfd files created on another computer.
  In both cases, I get a window that says "TSDBOOT it comes to format not supported ', so that is not supported, my file img/vfd or my SD card RAM?

  I tried with card SD 8 MB and 256 MB, formatted both using "TOSHIBA SD Memory Card Format".

  NB: Before you start to use Partition Magic on the disk and install Linux, I would like to have a rescue disk (using the SD card instead of the WinXp boot rescue disk).

  Hello

  I force are a large part of the experience, but I presume this vfd/img file is not supported. As you know the latest are shipped without a floppy drive, and you can use the SD card to update the BIOS or even to save the password.

  Please check the advanced search on this forum and you will find a few interesting discussions on the same topic.

• I have 8 GB of Ram in the 1st slot DIMM... can I add another in 2nd slot?

  I ordered a HP Evny 310xt 700 with windows 8.1

  I opted to have 8ram in a Dimm location instead of 4ram in two slots...

  I had hoped to get another 8ram module into slot 2 when my pc gets... so I'll have 16 RAM, but I have a hard time to know where I can get the original parts of HP. I haven't tried th parts store to HP no chance. I don't want to throw the 8ram far which is delivered with the machine and two others... I want to keep the 8ram that comes with it... and add a unique 8ram.

  "The part number for my module memory 8 GB is part number 698651-154"

  do I have to use the exact same part of the manufacturer?

  Thank you very much in advance

  Hello

  Yes, you can add 1 piece of 8 GB to the second slot to make 16 GB as shown:

  http://support.HP.com/us-en/document/c04344813

  You can use the other RAM with the SAME characteristics but using the same RAM is much better in terms of peace of mind. HP RAM may be slightly more expensive.

  Kind regards.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• Compatibility RAM with Satellite M70 354

  Hello

  I have the laptop model Toshiba Satellite M70-354 with Samsun 2 * 512 MB RAM DDR2 * pre-installed.
  There is the description on RAM - * DDR PC2 4200 *.

  I want to up-grade/replace my RAM to 2 GB.
  I brought again * 2 GB of RAM of the Transcend.
  Disription written the i.e. - * DDR2 667 *.

  I want to know that i * s this RAM is compatible * with my laptop?

  Can someone provide me with support on the same?

  Thank you

  Chirag

  Machine tender specifications for this old compatible RAM modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  If you want to use max supported 2 GB I recommend to use 2 x 1 GB (PA3411U-1M1G).
  These modules are tested and 100% compatible.

• C55-A-1MW satellite does not start with the new RAM inserted

  Hey.

  I hope to find someone who can help me... I bought ram memories and tried 4 different memories in my C55 A 1MW Satellite. But each card RAM I have insert makes the computer cannot start... It lights just to stop again.

  Is there a compatibility issue or anything like that? I used 2 different aData Ram extensions cars, 1 1 and 4 GB 2 GB. the 4 GB card was 1333 mhz and was 2 GB 1600 mhz card. and I tried 2 corsair 4 GB 1600 mhz different cards.

  Is this something that makes only able to expand RAM with Toshibas own memories or is the second cardslot for broken RAM memory?

  As I see you use RAM modules with different specifications. Your problem is certainly of RAM compatibility and you must use the RAM modules with the same specifications.
  According to specification of laptop there are 4 slots of memory and laptop can handle up to 32 GB of RAM.

  The compatible RAM modules are:
  4 GB DDR3L-1600-PA5104U-1M4G
  8 GB DDR3L-1600-PA5104U-1M8G

  Of course, you can use modules from other manufacturers, but please do not use some cheap products. I can recommend the use of Kingston memory modules.

• Satellite L20: what DVD-DL is compatible with the DVD - RAM UJ-8415

  Hello

  could someone please tell me * who DVD Double-layer are compatible with the carpet * a DVD - RAM UJ-8415 * (of * Toshiba Satellite L20-112 *, * model No.) PSL2XE 00M00GGR *)?  :| According to the specification, this carpet * a DVD-RAM supports the DL technology, although in reality, it is not as simple as that. It does not burn even all DVD of 'single layer '. I've already spent a lot hell of money just trying to find the right DVD DL to be used on the machine, but unfortunately without success.

  I'd appreciate any help or advice on this subject!

  Regarding most amiable of the Germany.

  :)

  Hello

  I use a very simple freeware application called DiscInfo http://discinfo.rpc1.org/ of
  to get information about the compatible CD/DVD and disc capacity.

  Is it not all CDs & DVDs are compatible with each player. Usually, the Toshiba manual provides a list of compatible CD and DVD.
  The mediums referred to in the user manual should work for sure.

  Just FYI; found this read/write properties maximum speed:

  _ * Reading * _
  24 x Max CD-ROM
  DVD - ROM 8 x Max

  * _Write_ *.
  CD - R 24 x Max
  CD - RW 4 x Max
  DVD - R 8 x Max
  DVD - R (Double Layer) 2 x Max
  DVD - RW 4 x Max
  DVD + R 8 x Max
  DVD + R (Double Layer) 2.4 x Max
  DVD + RW 4 x Max
  DVD - RAM 5 x Max

• I'm looking to move from Windows/Apple/logic and Cubase Cubase. My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM. This computer will be powerful enough to run the current logic without any pr

  I'm looking to move from Windows/Apple/Logic Pro X and Cubase Cubase.

  My questions have to do with the current (2014) Mac mini, specifically the i5 $999 2.8 GHz with 8 GB of RAM.

  This computer will be powerful enough to run Logic Pro X DAW and Cubase 8 courses without any problem?

  I would say yes, but I post here too:

  Logic Pro

• I have a Macbook Pro mid 2012 edition, i7 and 8 GB (2 x 4 GB) of RAM DDR3 (1600 MHz). Can I add any RAM with this config?

  I want to upgrade my RAM 16 GB (2x8GB) and also to change the hard drive (750 GB) to a 250 GB SSD. I was going through the forum and people have posted that they have improved their RAM with no problems. I visited the local electronics market and is the knowledge that they have a Kingston 8 GB DDR3 1600 MHz RAM. I just want to know if it is safe to add that RAM for my MBP or not? One of my friends told me that the MBP requires a different sort of RAM so I am confused. In addition, I was intending to buy a single 8 GB and set up my MBP with 12 GB (8 + 4) RAM and then replace the other 4 GB with an 8 GB to make eventually 16GB. Will there be a problem with this approach? Also can I add any SSD fits laptops from my system? I found an SSD 240 GB (uv300) Kingston. Please suggest if I can add that.

  You can fit a maximum of 16 GB, if you choose compatible Ram.

• Satellite L30 10Y does not start with the new RAM modules

  Hello
  regged just with this forum I have a problem to upgrade memory.

  I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.

  I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.

  I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.

  You see 896 MB, because the rest is reserved for VRAM for graphics card.

  Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.

  What speed and timings is your original RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  What speed and timings is your new RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  You can display this information using a utility called CPU - Z
  http://www.CPUID.com/cpuz.php

• 16 GB of RAM with a work for the MacBook Pro mid 2012 13 "i5 location?

  Hey,.

  one of my two RAM slots no longer works. I always wanted to update my 16 GB RAM. I know that my MacBook Pro can have 16 GB of RAM with 2x8GB - RAM modules. But is it possible to have 16 GB of RAM with a slit (1x16GB) ?

  Call OWC (macsales.com) and Crucial to ask, but the kits which they tested for 16 GB is 2x8GB.

• What RAM modules are compatible with the Satellite A100-590?

  Hello

  I plan to upgrade the memory of my A100-590. At present, there are 2 x 512 Mo of RAM DDR2-533 Samsung inside. The motherboard supports PC2-4200 and PC2-5300.

  If I want to put 2 x 1024 MB DDR2-667. Now, my question is, RAM from other manufacturers such as Corsair, Kingston etc is also compatible with the jury?
  Thanks in advance for your answers!

  GMC

  they * SHOULD * be compatible with this machine, but I won´t dare to say they really are.

  Then it s even better to use the original modules because you can be sure that they are 1000% compatible with your laptop.

  Welcome them