MD3220i lock problem

Hi all

We have a strange problem with the md3220i.

The system is brand new, we opened the packages and the power of the system, but we have something strange with the newspapers. We cannot communicate with the controller. That's what we see in the papers:

How to solve this problem, do you have any ideas?

-=<###>=-
Instantiation of RAM rawfs, peripheral = 0 x 1
RAM DOSFS formatting
Instantiation of RAM rawfs, peripheral = 0 x 1
Formatting... Params volume consulted old 38% trust:
Volume settings: FAT type: FAT32, sectors per cluster 0
0 copies FATS, groups 0, 0 sectors per FAT
Areas reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, (null), serial number 10000 sysId
"Label:" «...» "
Drive with 1024 sectors of 512 bytes will be formatted with:
Volume settings: type FAT: FAT12, sectors per cluster 1
2 copies FAT, clusters of 1010, 3 sectors per FAT
Areas reserved 1, hidden 0, FAT sectors 6
Root dir entries sysId 112, VXDOS12, serial number 10000
"Label:" «...» "
Instantiation of RAM rawfs, peripheral = 0 x 1
Ok.

RTC error: Device real-time clock does not work

Autonomous 13884 symbols added.
Length: 0x13c bytes
Version ver03.0A

Reset, Power-Up Diagnostics - loop 1 1
Processor 3600 DRAM
Data lines 01 Passed
Address lines 02 Passed
NVSRAM 3300
Data lines 01 Passed
4410 Ethernet 1 82574
01 registry read Passed
Address lines 02 registry Passed
6 d 40 Bobcat
02 flash test passed
3700 PLB SRAM
Data lines 01 Passed
Address lines 02 Passed
7000 TO iSCSI BE2 1
01 registry read successful Test
02 registry address lines Test passed
Rows of data from registry 03 test passed
3900 real-time clock
01 RT Clock Tick past
Diagnostic Manager came out normally.

Current date: 15/01/14 time: 01:43:59

Send Change Service Interface rate or baud
15/01/14-09: 00:05 (NCDB): NOTE: set the Powerup State
15/01/14-09: 00:05 (NCDB): Normal sequence SOD, the 0 on controller
15/01/14-09: 00:05 (NCDB): NOTE: turn on seeing failure summary tray
15/01/14-09: 00:06 (NCDB): NOTE: installed protocols:<>
PS: RDMA ISER IPOIB >
15/01/14-09: 00:06 (NCDB): NOTE: the required protocols:<>
UNK >
15/01/14-09: 00:06 (NCDB): NOTE: loading of the flash file: iSCSI
15/01/14-09: 00:08 (NCDB): NOTE: DSM: current revision 7
15/01/14-09: 00:08 (NCDB): NOTE: SYMBOL: SYMbolAPI registered.
15/01/14-09: 00:08 (NCDB): NOTE: the total size of the Patriotic Army Rwandan RCBBitmapManager = 1778384896
15/01/14-09: 00:09 (NCDB): NOTE: in iscsiIOQLIscsiInitDq. iscsiIoFstrBase = x 0
1
15/01/14-09: 00:09 (NCDB): NOTE: loading of the flash file: MTLSEBET1G
Disabled the COMPLETE TRACE *.
15/01/14-09: 00:09 (NCDB): WARN: MTLSE: before size special mtl_create_pool:IO: 0 x
140
15/01/14-09: 00:09 (NCDB): NOTE: init: IOC: 0, PLVersion: 11-03-075-00
15/01/14-09: 00:10 (NCDB): WARN: MLM: failed to create m_MelNvsramLock
15/01/14-09: 00:10 (NCDB): WARN: MLM: failed to create m_MelEventListLock
15/01/14-09: 00:10 (NCDB): NOTE: CrushMemoryPoolMgr: platform and memory (CPU M
emSize: 2048), adjusted allocation size to 65536 for CStripes
15/01/14-09: 00:12 (NCDB): SOD: instantiation Phase complete
15/01/14-09: 00:11 (IOSched): NOTE: SAS Expander added: expDevHandle:x 11 enclHan
DLE:x 2 numPhys:37 port: 2 ioc:0 channel: 0 numEntries:22
15/01/14-09: 00:11 (NCDB): WARN: sodLockdownCheck: sodSequence update: CtlrLock
down
15/01/14-09: 00:11 (NCDB): caution: any attempt to open the inter communication controller
communication channels 0-0
15/01/14-09: 00:11 (NCDB): NOTE: LockMgr role is master
15/01/14-09: 00:12 (tSasExpChk): NOTE: Local Expander Firmware Version: 00.00.80
.10
15/01/14-09: 00:18 (tSasDiscCom): NOTE: SAS: full time of Initial discovery: 36
seconds since the last power on / reset, 10 seconds since the instantiated sas
15/01/14-09: 00:18 (NCDB): NOTE: baseName WWN 000290 b 1-1c1190ee (valid ==> SigMat
ch)
15/01/14-09: 00:18 (NCDB): NOTE: spmEarlyData: no data available
15/01/14-09: 00:18 (NCDB): NOTE: 2 Ut ServerEngines BladeEngine Firmware update
m v2.901.242.0
Copyright 2009 ServerEngines Corpo
15/01/14-09: 00:18 (NCDB): NOTE:
15/01/14-09: 00:18 (NCDB): NOTE: found card BE 0 x 0 to 2.0 bar1-base 0xf0200000
bar2-base 0xf0220000 dev 0x384292c
15/01/14-09: 00:18 (NCDB): NOTE: flash_rbver = 2.0.3.768
15/01/14-09: 00:18 (NCDB): NOTE: flash_armfwver = 2.901.319.0
15/01/14-09: 00:20 (NCDB): NOTE: ufi_rbver = 2.0.3.768
15/01/14-09: 00:20 (NCDB): NOTE: ufi_armfwver = 2.901.319.0
15/01/14-09: 00:20 (NCDB): NOTE: Flash on BladeEngine at 02:00 corresponds to UFI
BE2T1G
15/01/14-09: 00:20 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: 0 ins
tId 0
15/01/14-09: 00:20 (NCDB): NOTE: irq_ptr:0xd78850
15/01/14-09: 00:20 (NCDB): NOTE: BcmId [4] PCI [2.0.4]
15/01/14-09: 00:20 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:20 (NCDB): NOTE: IO BAR0 base 0xf0380000
15/01/14-09: 00:20 (NCDB): NOTE: BAR1 MEM base 0xf03a0000
15/01/14-09: 00:20 (NCDB): NOTE: BAR2 MEM base 0xf03c0000
15/01/14-09: 00:20 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x526fbc0 target bcmid:0 init bcmid: 4 rc 0, phba:0 x 5270020
15/01/14-09: 00:20 (NCDB): NOTE: target: irq_ptr:0x0xd780b0, func:0 0, bcmId:0 0 x x

15/01/14-09: 00:20 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId BDF 2.0 0
.0
15/01/14-09: 00:20 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:20 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd780b0, phba:0
x383fca0, func:0 x 0
15/01/14-09: 00:20 (NCDB): NOTE: BcmId [0] PCI [2.0.0]
15/01/14-09: 00:20 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:20 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:20 (NCDB): NOTE: BAR1 MEM base 0xf0200000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: BAR2 MEM base 0xf0220000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: BAR4 MEM base 0xf0240000 size 1
15/01/14-09: 00:20 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:21 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47392fe00 size 167
77216 (ConIO-size 16777216) recorded for the pre-post on port 0 data buffers
15/01/14-09: 00:21 (NCDB): WARN: MTLSE: default link on the interface-local address
1 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 41
15/01/14-09: 00:21 (NCDB): WARN: MTLSE: default link on the interface-local address
5 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 41
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: default link on the interface-local address
6 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 41
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 0 rc
0
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 0 rc 0
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: 1 ins
tId 1
15/01/14-09: 00:22 (NCDB): NOTE: irq_ptr:0xd78668
15/01/14-09: 00:22 (NCDB): NOTE: BcmId [3] PCI [2.0.5]
15/01/14-09: 00:22 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:22 (NCDB): NOTE: IO BAR0 base 0xf03e0000
15/01/14-09: 00:22 (NCDB): NOTE: BAR1 MEM base 0xf0400000
15/01/14-09: 00:22 (NCDB): NOTE: BAR2 MEM base 0xf0420000
15/01/14-09: 00:22 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x5d3a280 target bcmid:1 init bcmid: 3 rc 0, phba:0x5d40060
15/01/14-09: 00:22 (NCDB): NOTE: target: irq_ptr:0x0xd77ec8, func:0 x 1, bcmId:0 x 1

15/01/14-09: 00:22 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId 1 BDF 2.0
.1
15/01/14-09: 00:22 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:22 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77ec8, phba:0
x38403b0, func:0 x 1
15/01/14-09: 00:22 (NCDB): NOTE: BcmId [1] PCI [2.0.1]
15/01/14-09: 00:22 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:22 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:22 (NCDB): NOTE: BAR1 MEM base 0xf0260000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: BAR2 MEM base 0xf0280000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: BAR4 MEM base 0xf02a0000 size 1
15/01/14-09: 00:22 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:23 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47492fe00 size 167
77216 (ConIO-size 16777216) recorded for the pre-post on port 1 data buffers
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
2 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
7 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: default link on the interface-local address
8 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 42
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 1 rc
0
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 1 rc 0
15/01/14-09: 00:23 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: ins 2
tId 2
15/01/14-09: 00:23 (NCDB): NOTE: irq_ptr:0xd78480
15/01/14-09: 00:23 (NCDB): NOTE: BcmId [2] PCI [2.0.6]
15/01/14-09: 00:23 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:23 (NCDB): NOTE: IO BAR0 base 0xf0440000
15/01/14-09: 00:23 (NCDB): NOTE: BAR1 MEM base 0xf0460000
15/01/14-09: 00:23 (NCDB): NOTE: BAR2 MEM base 0xf0480000
15/01/14-09: 00:24 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x8d1bb00 target bcmid:2 init bcmid: 2 rc 0, phba:0x8d1e060
15/01/14-09: 00:24 (NCDB): NOTE: target: irq_ptr:0x0xd77ce0, func:0 x 2, bcmId:0 x 2

15/01/14-09: 00:24 (NCDB): NOTE: VendorID, DeviceId 0x19a2 210 bcmId 0 x 2 BDF 2.0
.2
15/01/14-09: 00:24 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:24 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77ce0, phba:0
x3840ac0, func:0 x 2
15/01/14-09: 00:24 (NCDB): NOTE: BcmId [2] PCI [2.0.2]
15/01/14-09: 00:24 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:24 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:24 (NCDB): NOTE: BAR1 MEM base 0xf02c0000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: BAR2 MEM base 0xf02e0000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: BAR4 MEM base 0xf0300000 size 1
15/01/14-09: 00:24 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:25 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47592fe00 size 167
77216 (ConIO-size 16777216) registered for the data pre-post on port 2 buffers
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
3 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
9 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: default link on the interface-local address
10 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 43
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 2 rc
0
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 2 rc 0
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: start: lowLevelInit target bcmId: ins 3
tId 3
15/01/14-09: 00:25 (NCDB): NOTE: irq_ptr:0xd78298
15/01/14-09: 00:25 (NCDB): NOTE: BcmId [1] PCI [2.0.7]
15/01/14-09: 00:25 (NCDB): NOTE: DFR 0 x 0212 VendId 0x19a2
15/01/14-09: 00:25 (NCDB): NOTE: IO BAR0 base 0xf04a0000
15/01/14-09: 00:25 (NCDB): NOTE: BAR1 MEM base 0xf04c0000
15/01/14-09: 00:25 (NCDB): NOTE: BAR2 MEM base 0xf04e0000
15/01/14-09: 00:25 (NCDB): WARN: MTLSE: fact: with the initialization of the initiator: mt
Lint: 0x8e829a0 target bcmid:3 init bcmid: 1 rc 0, phba:0x8e86060
15/01/14-09: 00:25 (NCDB): NOTE: target: irq_ptr:0x0xd77af8, func:0 x 3 bcmId:0 x 3

15/01/14-09: 00:25 (NCDB): NOTE: VendorID, DeviceId 0x19a2 0 x 210 bcmId 3 BDF 2.0
.3
15/01/14-09: 00:25 (NCDB): NOTE: target: VKI_INT_CONNECT success: status: 0x0
15/01/14-09: 00:25 (NCDB): ERROR: target: SRI registered: irq_ptr:0xd77af8, phba:0
x38411d0, func:0 x 3
15/01/14-09: 00:25 (NCDB): NOTE: BcmId [3] PCI [2.0.3]
15/01/14-09: 00:25 (NCDB): NOTE: DFR 0 x 0210 VendId 0x19a2
15/01/14-09: 00:25 (NCDB): NOTE: BAR0 e/s of basic size 0x00000000 0
15/01/14-09: 00:25 (NCDB): NOTE: BAR1 MEM base 0xf0320000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: BAR2 MEM base 0xf0340000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: BAR4 MEM base 0xf0360000 size 1
15/01/14-09: 00:25 (NCDB): NOTE: MPU_EP_SEMAPHORE 0x0000c000
Driver Build Date: Oct 25 2012, time: 15:03:42
ServerEngines iSCSI Target driver loaded
iSCSI Firmware Version: 2.901.319.0
iSCSI Driver Version: 2.901.242.0
Found BladeEngine2 in Gen2 x 8 PCIe slot
15/01/14-09: 00:26 (NCDB): NOTE: region memory of Rwandan Patriotic Army: start 0x47692fe00 size 167
77216 (ConIO-size 16777216) registered for the data pre-post on port 3 buffers
15/01/14-09: 00:26 (NCDB): WARN: MTLSE: default link on the interface-local address
4 is fe80:0000:0000:0000:92 1 b: 1cff:fe37:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: default link on the interface-local address
11 is fe80:0000:0000:0000:90 1:1 c 03 b: e837:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: default link on the interface-local address
12 is fe80:0000:0000:0000:90 1:1 c 07 b: d037:7 b 44
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: fact: with the initialization of the target: 3 rc
0
15/01/14-09: 00:27 (NCDB): WARN: MTLSE: fact: lowLevelInit bcmId: 3 rc 0
15/01/14-09: 00:27 (NCDB): SOD: pre to complete initialization Phase
15/01/14-09: 00:39 (NCDB): WARN: CmgrLockdownException: OF CORRUPTION of the DBM DATABASE
COPYRIGHTS - LOCKDOWN Type = 6
15/01/14-09: 00:39 (NCDB): NOTE: ACS: necessary Acs on Alt: no, StateCode: 6, Reas
onCode = 12
15/01/14-09: 00:39 (NCDB): NOTE: ACS: icon alternate ping failed:-2, RESP.:
0
AcsCommunicator::getInstance() indeterminate Mode, using DOMI
15/01/14-09: 00:39 (NCDB): WARN: ACS: altValidateStagedFirmware(): Domi outstanding
taken on: IconSendInfeasibleException error
15/01/14-09: 00:40 (NCDB): SOD: initialization of synchronization of the Code Phase complete
you
15/01/14-09: 00:39 (NCDB): WARN: case - CORRUPTED DB Lockdown. VPN did not update
of Sstor.
15/01/14-09: 00:40 (NCDB): SOD: initialization Phase complete
==============================================
Title: Disk Array Controller
Copyright 2008 - 2012 NetApp, Inc.. All rights reserved.

Name: RC
Version: 07.84.44.60
Date: 25/10/2012
Time: 14:41:57 CDT
Models: 2660
Manager: devmgr.v1084api04.Manager
==============================================

15/01/14-09: 00:39 (NCDB): NOTE: available symbol
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: * WARNING!
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: * this controller is locked because of the detec
Ted *.
15/01/14-09: 00:39 (NCDB): WARN: * bribery in the primary database.
**
15/01/14-09: 00:39 (NCDB): WARN: * in order to avoid any loss of configuration.
the *.
15/01/14-09: 00:39 (NCDB): WARN: * backup database must be restored.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
**
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:39 (NCDB): WARN: *.
***********
15/01/14-09: 00:40 (NCDB): SOD: sodComplete complete Notification
15/01/14-09: 00:40 (NCDB): sodMain CtlrLockdown sequence complete, elapsed time
= 35 seconds
15/01/14-09: 00:40 (NCDB): full sodMain
15/01/14-09: 00:39 (NCDB): WARN: sequence of lockdown SOD full - suspension...

If you have the serial cable or reset password cable as the manuals refer to it, you can remove the lock status. I know that this command works, but only if you are able to enter commands in the CLI by the serial port. If she will accept the orders, you will see a-> when you press on enter. The clear locking control is lemClearLockdown I believe. It can be so lemClearlockdown.

These controllers go in many States of lockdown too easy if you ask me... I fight 10 + MD32XX units right now. Although I can't enter commands in the CLI, it enters just text and does not recognize it as any kind of order. I hope that you are not as lost as mine, I've got one under warranty, so I'm about to call Dell technical support. I'll post an update when I'm done crying.

Good luck

Tags: Dell Tech

Similar Questions

  • Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

    Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

    Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

    http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

    Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

  • Lenevo Z580 key lock problem

    I bought reliance Kolkata Z580 August 4. I am
    really very satisfied with my purchase even after the purchase of
    authorized dealer. We've checked the machine, the best way possible and
    a machine at home. At home when we started typing a single key
    'W' is completely forthcoming when you press the right side of the key. I went
    the shop of Reliance and show them the problem they redirect me to the
    Lenevo Service Center and they r saying that you have not checked
    properly at the time of the sale. I went to the Service centre and departure
    They said the 14th day of purchase, that it is not under
    warranty. You have to pay or appeal in Bangalore to approve the total amount
    replacement of keyboard. After a few words with the receptionist, engineer
    verified correctly and told me it is not broken. The key to the inner
    locking is faulty. They took my details with the snapshot of
    the key and told me if Bangalore will be approved them they will replace
    the full keyboard. My complaint is why should I pay Rs 43000 /-for a
    faulty laptop. I will not replace the keyboard. I want the total
    Replacement laptop. I won't take this defective product.

    I'm asking them to do what is necessary for the replacement of the defective product.

    Waiting for your prompt action and response.

    He was replaced by Lenevo without any chareges

  • Screen locking problems model?

    I have a setup of reason as my lock screen for my phone and 2 out of the 3 times that I try unlock it, it does not work. I try to drag the ground, but he thinks that I lifted my finger and the lines are red, as when guess you the wrong pattern, and the lines can get crazy, the point shooting randomly on the lock screen, making very tempremental. When this happens I just click the lock button to close the display off, and then try again. Even after I do that, it still does not work and the lock screen will become crazy... Any help/tips? I can load a video if that helps...

    I have this problem with my phone in the morning. I think it is do to the fact that I have my AC make my really cold room. If I leave the room for a few minutes, that I have no problem. It only happens when it has been in a cold room.

  • Screen lock problem

    I have a 64 GB iPhone and last week, I updated to iOS iOS 8.xx 9.1. After the update, my phone slow sometimes and the screen has not moved even I scrolled across. The problem is, when you locked your phone with touch support, screen, it should be showed black white screen and locked instantly, but with my phone, sometimes when I blocked my phone, it shows the black white screen and then the background appear for a while and then the locked phone. Could someone help with this problem? Is this a bug or something?

    Could just be a bad copy of the iOS software. Save it to iTunes or iCloud, plug it into iTunes, restore as a NEW and test again. If the problem is resolved, then restore your backup, if the question comes up, the iOS and the phone is very good, it's probably something corrupt in your backup. But most of the time, a restore will solve your problem

  • Muliple USRP RIO 2943R, synchronization and phase-locking problem

    I use 8 USRP RIO 2943Rs transmission of signal and receving (4 for Tx) and 4 for Rx I'm using the "signal-based" method for synchronization of all devices. And I did it. I tested the system the result is very interesting:
    1. when I put the sampling rate of less than 40MS/s IQ, I can obversve very good phase locked Tx and Rx signals (I use a sine wave CW for tests), please refer to video joint (locked 40MSs)
    2. BUT, when I put the IQ more than 60 MS/s sampling rate, I'll lose phase lock. Please refer to unlocked 60MSs. My goal is to run the system at 120MS/s
    I have doubt as to if the problem comes from two sides:
    a. the sync methed isn't fair
    b. OR, should I increase the clock that operates the loop 'In Streaming radio engine' in the FPGA VI. as shown in the following image.

    I would like to ask experts in the forum to discuss the solution of this problem.
    More information about my system setting:


  • UMI lock problem

    I have a configuration that is moved from one place to the other and I can't make it work more.

    Setup is a controller PCI-7330, an UMI-7772, a pilot for the series P7000 on axis 1 (currently not connected) and a pilot custom on axis 2.

    The issue seems to be with the intelock, since this LED on the UMI-7772 turn so the axis DISABLE the LED will remain lit.

    When I test the controller, it passes the test, when I initialize it I get an OK message and the "stop" box is not checked in the settings of my controller. I tried a few connect/disconnect the controller throttle cable and sides UMI, but the lock light is ON. I also tried with my emergency position switch and disconnect the connector global stop.

    Any idea or suggestion on what might be the problem?

    Thank you

    Ben

    Ben,

    the interlock LED should indicate that the tension of the bus host (+ 5 V) is not present. Typically, this means that the PC is not enabled. In your case, this seems to indicate a hardware problem with either the 7330, the 7772 or cable.

    Please check for pins twisted and if you connect the cable correctly. Indeed the cable pins high densities motion are robust enough, but with a decent amount of force, it is possible to plug the cable into the connector on the reverse.

    If this is not the cause of your problem, you should try to follow signal V + 5 of the connector on the Board until the end of the cable. If you do not find the source of the problem, please try to switch the different components of the system, but of course, this is possible, if you have the same type spare components.

    If nothing works, you should contact your local branch of NOR. Maybe they can lend you a Board, a cable and a UMI, so you might find the broken component.

    Kind regards

    Jochen Klier

    National Instruments

  • Connection num lock problem

    Here's my problem:

    I am running Windows XP on triple boot with Ubuntu and Backtrack. Caps lock Num Windows turns on whenever I start. Lock num on my computer is physically damaged (even if this is not the reason why turn on num lock), which means that I can not connect.

    I use Ubuntu right now. Since Ubuntu has the ability to open and modify Windows .exe, I open regedt32.exe and modified HKEY_CURRENT_USER\Control Panel\Keyboard "InitialKeyboardIndicators" = "1".
    I also modified HKEY_USERS, yet my registry did not have a "Control Panel" button, so I created myself: HKEY_USERS\. Default\Control Panel\Keyboard "InitialKeyboardIndicators" = "1".

    I also tried another method that was to create a file called "numlock.vbs" and write the following:

    Set WshShell = CreateObject ("WScript.Shell")
    WshShell.SendKeys "{NUMLOCK}".

    And paste the file in All Users\Menu Démarrer\Programmes\Démarrage. Nothing has worked so far.

    In accordance with the following article, the values only legal "InitialKeyboardIndicators" is 0 (off) or 2 (market).

    "How to activate the key NUMLOCK for logon screen?"
      <>http://support.Microsoft.com/kb/154529 >

    "NUMLOCK causes problems of connection with laptops.
      <>http://support.Microsoft.com/kb/170903 >

    HTH,
    JW

  • Compaq Presario SR5249 SD drive locked problem

    When you insert an SD card, everything works fine except that it says the card is locked. It is not locked and even try to change it in the properties it remains locked.

    However, the card reads corrcetly and is unlocked in a HP printer.

    He worked initially in the Compaq but seems to have had a changed framework spomehow.

    Everyone knows the problem please?

    Thank you for what he confirms my thoughts about a reconstruction.

    I think I'll live with it and use the reader on the printer.

  • Windows screen lock problem

    Hello

    I have the problem of Windows screen lock on my PC.

    Usually, when you exit the log of the PC, it locks automatically the screen and you must type the single password to log in, but I need to type user name and password each time.

    other people have tried on my PC, but username remained and only password type, it goes to only my account.

    Even if I deleted my profile and it created again, happens again.

    Please give me some advice.

    Thank you

    Use the following steps at your own risk

    http://www.SevenForums.com/tutorials/61650-log-user-name-password.html

  • The maximum overflow of BDB locking problem

    Hello

    I have a single threaded application that updates my Berkeley DB in a single transaction. My operations stand as below:

    DB_OPEN()

    START_TXN()

    DO_DB_OPERATIONS()

    COMMIT_TXN()

    CLOSE_DB()

    Inside this single thread of control, it can be very large number of updates to db (there may be 5 million or even several updates).

    I had the set_lk_max_lockers value in high enough DB_CONFIG. But some times, the application has been affected by error "no more locks available".

    To remedy this, I put these values in high enough DB_CONFIG. Now my DB_CONFIG values are as follows:

    set_lk_max_locks 15000000

    set_lk_max_lockers 15000000

    set_lk_max_objects 15000000

    But with this new problem is size of my of the __db * files is huge (on the order of 8 to 10 GB).

    Now in this version I have no intention to do my multi threaded application. The application will have only one thread of control of BDB.

    Then I have an option to set default set_lk_max_locks values and to open the db in exclusive locking mode using the function set_lk_exclusive()?

    Kindly help me to understand meanings will be setting my problems of maximum value of locks and the size of the file resulting __db? *

    Kind regards
    ~ K ashish.


    Hi Ashish,

    The DB-> set_lk_exclusive function is a new function introduced in db - 5.3, and you can see the guide to upgrade to http://docs.oracle.com/cd/E17076_03/html/installation/upgrade_11gr2_53_excl.html

    Thus, it is not available in db - 5.1.

    If your program has only a single thread of control (multi-threads and not multiprocess) access to BDB, you can even disable the lock by not providing DB_INIT_LOCK when creating the environment, since the DB_INIT_LOCK is not bound to occur with DB_INIT_TXN.

    Deactivation of the lock and light txn can give you the assurance of atomicity and durability. And you must not make sure than no simultaneous access to ensure consistency and isolation.

    Another way is to restructure your program avoid doing many updates in a transaction and distributes updates of multiple operations and starts next after the previous commits. But it depends on your program logic, so we can give more detailed suggestions on how to divide the operations without more detailed information.

    Kind regards

    -Winter

  • Locking problems

    Hello

    How do we find lock conflicts happing in programs competing application, wherever it raises problem, one can share any docs metalink to find conflicts of locking which spends in the forms or applications simultaneous

    Hello

    Refer to the following documents:

    Note: 200590.1 - bde_session_locks.sql - locks for given the ID of Session (8.1 to 9.2)
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=200590.1

    Note: 169630.1 - bde_session.sql - expensive SQL and use of resources for the Session ID given
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=169630.1

    Note: 214088.1 - the Scripts of Directors Oracle Applications system
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=214088.1

    Note: 108185,1 - Oracle Application Object Library scriptsSQL
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=108185.1

    Kind regards
    Hussein

  • macOS Sierra caps lock problem

    I have put 2 languages in my macbook air mid-2013. After having the upgrade to Mac OS Sierra, my macbook air cannot change text or uppercase nor lowercase. When I click on a shift key, the input language get changed between them rather than change the uppercase or lowercase characters. Please help solve this problem, thanks a lot.

    Check system prefs / / keyboard shortcuts to see what has been set for the modification of input sources.

  • Lock problem, P10-792 and intel 2200BG wireless

    My 792 P10 is not equipped with Wireless Lan Mini-PCI card and it doen't have the on / off wireless switch, but it is possible to add a mini-pci wireless card.

    I installed the Intel 2200BG mini-pci wireless card. The drivers are installed in windows and linux correcltly.

    When I am using Intel wireless tool to set up my wireless card, I get the error message:
    Locking wireless must be turned off and the same error under linux when I am loading the module appropriate.

    I tryied to disable wirelless lock using Fn + F8 and all the other function keys, but nothing happened.

    How can I unlock Wireless Lan?
    Thank you.

    Hello

    Can you please check the status of the card wireless in Device Manager? The card enabled or disabled? Please check in the properties of the map under the device using wireless if there is use of the status of this device.

  • Clock screen locking problems

    My lock screen clock is not update indicates 6 no h no mater what time it is and show that it is killing when it is actually Tuesday.

    Have you, or do you have all the apps like widgetlocker installed?

    Thank you

    J

Maybe you are looking for