Me locked out of my user group, the Aministrator leaves me not in

Similar Questions

• Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found.

  While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  ........ Content of the lead in double...

  I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.

  Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.

  RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.

  I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.

  I tried then access these locked directories showing locked and have encountered the error

  C:\Users\ (X) 'X' is not accessible, access is denied.

  I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.

  AND yet once I met the other mistake

  Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.

  So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment...  :-)

  Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.

  Hi Barry,.

  Sorry for the late reply.

  The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.

  How to repair or reinstall Internet Explorer in Windows

  https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0

  Keep us informed on the issue.

• locked out of my error of the portable computer, your PC is in offline mode. Please sign in with the last password used on this PC"

  OT: locked out of my laptop.

  Hello, I have an Asus with Windows 8, and last night my friend locked me out of my laptop by pressing on enter far too often. Now I can not connect on my laptop. Whenever I get my password it says "your PC is offline.". Please sign in with the last password used on this PC"and I really need to get inside because I have a great duty that I have to finish and return. I really need help.

  Hello Tiana,

  Thanks for posting your query in Microsoft Community Forum.

  Of course, I understand the feeling of being locked out of computer especially when you have something important lined up.

  In this scenario, you perform Refresh if you have Windows 8 DVD with you.

  How to refresh, reset or restore your PC

  Warning: Apps that you have installed Web sites and DVD will be removed. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  In case you don't have a disc, you can contact Asus that can help reset the computer to factory settings.

  Contact us - Asus

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• How to merge "Public Documents" and "My Documents"? The user in the 'Documents' files do not appear in 'My Documents', but are in "Public Documents".

  Win7 HP SP1

  These files appear in 'Documents', but do not appear in 'My Documents'

  They appear in "Public Documents".

  How can I merge the records of theses and never save in "Public Documents".

  Most is the user created, some files are program files.

  I have a profile of the 'public' on my computer when I connect, but I never use it, unless the office staff has a lot of programs open and I want to watch a movie

  or something I can change user to ease up on the use of the RAM.  Not sure if it is effective.

  examples of FLE: crashdump (empty)?, funny, auction sales of goodwill, agreements of music songs,.

  NativeFus_Log (empty)? , Tango (1The, a download of a messaging application), telescope, Youcam (program)

  There is also a 'my images' and 'Public Pictures', not sure why.

  Thank you!

  Right-click in the document library, click Properties.  Choose here, whether you want the public location to not use (or you can even remove it completely).  You can also choose which location is used as the default save location.

• I myself locked out administrator (don't remember the exact user name)

  while trying to prevent problems, I have created a.  I'm now working with access only, when I go to "change user", it is more shows me the icons and the names of other users and I don't remember the exact name of the user for a full access account.  Help!

  Hi karmagoodwin,

  (1) this only happens to you when you switch the user?

  (2) what happens when you restart the computer, try to log in?

  Method 1: In addition, you can consult the steps mentioned in below link below which deals with a similar question.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Method 2: See the link below for more information on the use of fast user switching.

  How to use the Windows XP Fast User Switching feature

  http://support.Microsoft.com/kb/279765

• Locked out as a user and administrator but others ok

  Vista Home Basic. Service user profile service has no logon. User profile cannot be loaded

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

   

   

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• VMware Atlanta user group the agenda?

  I see the agenda of the time, but to be able to rationalize the cutting of a whole day out I need more information about what actually happens to be presented and discussed. "Cisco and VMware" does not cut. I sent an email requesting more information, but got no response.

  Is there anyone out there reading this who can give me more information or at least put me in touch with the right people?

  Cisco will discuss their Unified Computing Platform and their VMware optimizations.  This will be a 90 minute presentation.

  Intel will also improve the efficiency of data centers.

  If you have any other questions, please let me know.

  Best regards... Bruce

• ICloud is useful for a basic user of the computer that does not fully understand what ICloud all done?

  I was wondering if I can download it? I don't know if he does something in the background that makes life easier for me that I don't know yet? I knew someone had a message in mozilla support they have had problems with it. I had some of these same issues when I had to ICloud refreshing PRIOR to firefox. What do you think? Thank you!

  iCloud is not a mozilla (the organization that makes Firefox) produced, and mozilla has no control over it. This will not affect firefox somehow. This pagecontains information on what iCloud only. If you have further questions about iCloud, you should ask on the apple support forum. Thank you!

• Add the user to the users group in the Users.ini file using c#

  Hello

  Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.

  The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.

  We have seen that we are able to add the user to the list of user help file

  engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said

  RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)

  If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property

  engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  This causes an exception of object reference when we run the application.

  Please advise on how to proceed.

  Thank you

  Arun-

  The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.

• How to restrict access to certain pages of a user group

  I want to restrict access to certain pages in my application to a set of users only. How can I achieve this.

  use the authorization scheme for permission to the users group"

  See also follows her

  Schema authorization using the APEX authentication scheme

  security - authorization roles and user in Oracle Apex? -Stack overflow

  How to create the schema for permission for the users group.

  Leave.

• HP g7-1320dx - on the numeric keypad does not work and the Num Lock will beep when you press

  Today, I noticed that my keypad does not work. The keys / *-+ and 'Enter' works, but the actual number will not.

  When I press NUM LOCK, it only beeps and turns the light active or not. And the keys / *-+ and 'Enter' won't work, any more than the actual digital keys.

  The regular keyboard numbers and keys all work, it is a simple matter of numeric keypad.

  Any ideas?

  So I thought that my own problem.

  "I went to the "Ease of access" >"mouse settings"> "paved digital use to move the mouse on the screen" and it has disabled."

  I hope it helps someone else in the future!

• Printers under the original user have the printer properties grayed out for new users, even if they are members of the Administrators group

  Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.
  The domain users group is added to the local Administrators group.
  Printers are installed under the first domain user.  These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.
  All right.
  Users in the second domain is connected to the computer.  They are part of the local Administrators group, because they are part of the domain users group.
  They're going to look at the properties of the printer and almost everything is grayed out.
  Why?  Because they are part of the local Administrators group, they should not have full access?
  I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group.  Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?
  Thanks in advance for your help.

  Hi Gsaunders,

  If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• Computer locked out, says incorrect password, has not changed the password.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: computer locked out, says incorrect password, haven't changed the password.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  These things don't happen by themselves. Once you're in the system, do a thorough analysis of the malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Group Lock VPN 3000 binding users to their group

  I only use a 3015 VPN with VPN Client 3.5.1 using IPSEC. Cisco ACS 3.0 is the radius, all users of the authentication server. If I use a group on the client, I can log in using a different username to groups.

  It is interesting then you get the other privileges of groups for this user as you would expect.

  If I select group Lock on core group settings is not any effect.

  I want to restrict the access of clients to the users group in its own configured.

  I use an external authentication to the Radius ACS server for groups.

  Thanks for any help you can give.

  Mark

  Hi Mark,

  You can follow the example of configuration to:

  http://www.Cisco.com/warp/public/471/altigagroup.html

  Thank you

  Jean Marc

• AlreadyLockedException: Cannot lock the file, another user holds the lock

  I created the client application to web service using Jdeveloper 11.1.1.7 and deployed on weblogic 10.3.6 on cluster consists of 3 servers. The task of the application is to extract the data from the DB and push application external server permanently. Everything seems fine and works applications. The problem is with some message logs on all three servers.

  I see the following stack of servers:

  oracle.jbo.AlreadyLockedException: Houston-26030: unable to lock the file, another user owns the lock. [[

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1105)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:567)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8589)

  at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:6237)

  at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6756)

  at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6943)

  at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3301)

  at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3106)

  at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2108)

  at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2389)

  ........

  It is clearly stated that another process locks the record while the current process tries to lock the record even. Yet once obvious to say that the same application is deployed on three different servers (i.e. on the cluster) and each application tries to do the same task at the same time in each of the three servers with cluster.

  Question: It is healthy to ignore this error? or I have to solve out?

  I also checked this blog (Andrejus Baranovskis Blog: optimistic and pessimistic locking in Oracle ADF BC) he explains the difference between locking type available in the application model (optimistic and pessimistic). Will I change the lock mode in the request form for the client application that is mentioned to be optimistic rather than pessimistic? This will solve the problem? Is it OK to do with the behavior of the application who explained.

  I thought about this a bit more and would not use temporary tables. Because the ADF does not guarantee that a session database is still used by the same am it will be difficult to control.

  You can use a column in the table itself to write, for example, the name server that will manage the data before doing the real work.

  Our you will find further information in the table that allows you to balance the work using this in a query. Sample would be a column id that allows you to select only the tires where the modulo 3 id is equal to 0, 1, or 2. In this way, it would be pointless to write something on the table before proposing the line as each server would see only the lines it is supposed to work.

  Timo