measurement of input frequency TTL with sheet metal entered on a device USB 6363

Similar Questions

• Synchronization of two inputs frequency meter with several analog inputs

  Hi all

  I'm relatively new to LabVIEW and I'm trying to collect data from multiple sources with calendar sync on the acquisition, but I can't understand. My problem is that I have two inputs frequency meter, an optical tachometer reading one pulse per revolution and a max flow meter machines with a 12000 k coefficient. I can't find a way to synchronize the calendar with my multiple analog inputs. I tried to first get the speedometer to synchronize with the analog inputs following the example linked here. (https://decibel.ni.com/content/docs/DOC-10785) So far every time I run it I get an error on the DAQmx read timeout or an error "several sample clock pulses have been detected" (see image).  It seems if I slow the way to down to say 10 hz and make sampling rate ensure that the tachometer signal is more than 800-1000 rpm (13-17 Hz) before starting the VI then the program will run without error until the ROTATION speed is below this threshold, then the "sample Multiple clock pulses" error occurs.  The code is attached below.

  Does anyone know of a better way to synchronize the entries of frequency of the counter with analog inputs?  I would like to have a VI that can display 0 RPM (and possibly 0 flow as well, but I think I need to understand the timing of a meter before I have add another, because it seems that I can't have two counters to the same task). Any help on this would be greatly appreciated.

  LabVIEW version 13.0

  Chassis cDAQ-9178 with NI 9401 for both counter inputs and NI 9205 for the analog inputs.

  Thank you!

  Richard

  I know the error requires to restart the task at least (this particular error puts the material in a State that cannot be recovered from during execution of the task - I've been down this road before) but I'm surprised that you would have to delete and re-create the task altogether.  And then I had to do this to workaround other questions in the past.  It is awkward and should be considered a bug, if this is indeed the behavior.

  Honestly, regardless of this bug, the way the material dealing with the situation of several sample clock edges makes measures of sampling frequency clocked essentially unusable for purposes of synchronization (in my opinion anyway) If you encounter a more slow than your sample clock rate.  You are supposed to be "synchronization" of the measure, but it really no longer applies if you have to restart the task over and over again (if you must delete it or not).

  Workarounds can get kind of creation (which isn't really a good thing).  For example, you can configure a measure of implicit frequency to keep a buffer of frequencies and use a leader board task (source is the frequency signal, sample clock is the sample clock HAVE) to establish a correlation between the index of your buffer of frequency for singing HAVE sample clock.

  Best regards

• noise in the measurement of the frequency by using a counter

  Hi all

  I use a card 6602 for measurement of the frequency mode "bufferred range with 2 CTR", the signal of interest is a signal TTL of ODA, however, I got a signal as shown attached. It seems that the noise level varies with the level of the signal, y at - it a good way to eliminate this noise? Tried with digital filter, but it does not throw an error 200774. It seems that the source of the selected counter is set to default 'No Filter'. And I think also to use a bandpass filter, but given that the level of the signal changes (~ 300 Hz - ~ 300 kHz), high and low limits are not easy to define.

  Thanks in advance!

  Best,

  L.

  
  

• Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  This is the message I got when my backup stopped and said cannot complete backup. Need answers?
  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  --------------------------------------------------------------------------------

  A name was started with an invalid character. Error during processing of the resources ' file:///E:/WindowsImageBackup/ray-PC/Backup 2011-0...

  Hi lrl1of5,

  (1) do you use Windows Backup and Restore?

  (2) if it works well before?

  (3) remember to make changes?

  It is sufficient to indicate the complete error message you receive.

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2:  Clean boot the computer, then try to backup again

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I get this message: DNS server is not responding. Cannot view XML input using XSL style sheet.

  My problem was caused by using McAfee. The only way I can connect to the internet is if I start my computer in "safe mode". I've since removed McAfee from my computer, but I can't always connect to internet in normal startup mode. When I run a diagnosis, I get the message: "DNS server is not responding" & "cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button. »

  On the recommendation of MS tech support, I already tried

  1. perform a clean boot

  2. reset internet Explorer

  3 typeing these orders in the dark of the screen then restart the computer after you perform these steps

  b. Netsh int tcp reset

  c. Netsh int ipv4 reset

  zero i. (XP) netsh int ip reset

  d. Netsh winsock reset

  e. Netsh winhttp reset proxy

  f. Netsh advfirewall reset

  g. Ipconfig/flushdns

  h. Ipconfig/Release

  i. Ipconfig / renew

  j. Ipconfig/registerdns

  None of these recommendations solved my problem. I don't know if it is an IE or issue windows. Any other suggestions?

  Hello

  Please 1 create a restore point and run the mcafee Development tool. This will of cleaning after uninstalling the software. McAfee is known for questions after the uninstalled. For new AV you can try

  Microsoft Security Essentials http://windows.microsoft.com/en-us/windows/security-essentials-download. (Win08 already has Microsoft Security Essentials in the operating system)

  Tool Development

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Thank you

  Thomas

• Ability to burn a DVD with factory WIN7 Pro 64 from a USB?

  Recently bought a Compaq Elite 8200 SFF, after a few hours of use that I urged to create a WIN7 DVD factory as soon as possible. Had only DVD - RW empty records at the time (not good to burn the file WIN7), so I chose the alternative of the installfile from the factory on a USB and burn the DVD from the USB key later. My 8 GB key was little short KB of space, so I used a key to 32 GB... However, this does not work, the file WIN7 does not appear on the USB key (even if I enable hidden files). Maybe something was wrong, during the copy process because I can not boot from USB with the factory alleged WIN7 version, however, check the USB shows that about 8 GB of space (corresponding roughly to the drive WIN7 factory) is "occupied" by something. I´d like to use the 32 GB key for other purposes. However, the files on the USB factory settings are corrupt, or it is not possible to make a DVD (license problems?) once the default WIN7 was copied on the USB key? Any ideas?

  Hello:

  Unless your specific PC came with a bunch of software such as MS Office 2010 that you paid for a license and other software, all you really need is to be able to reinstall windows 7 on a new hard drive or your existing, correct?

  All drivers and most of the software except for CD and DVD burning programs are on the support page and driver Elite SFF 8200.

  So, all this...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can then get a portable hard drive and after installing all of your programs and drivers, etc., you can use the windows backup tool 7 and create a system image that you store on your portable hard drive. You can update this image any time you want and if you need to reinstall the operating system for a reason, you plug your storage device USB with the backup to this topic image, you use the W7 DVD do you, boot from it, select Repair in the lower left corner of the Setup screen , select restore backup, that it points to your image on the device of portable storage and you go.

  Worst case scenario, is that you will always have your installation of W7 plain DVD you did, which will install on any size of HARD, including an SSD drive.

  You can test that the DVD you made work by starting her and just do not proceed with the installation.

  BTW, you can install up to 32 GB of memory in your PC.

  Paul

• Password - when I turn the computer into a big red box with the words "Enter your password" appears

  When I turn on the computer a big red box with the words "enter your password" arrives, we cannot go into the user explains, I forgot the password. We can't still press Delete to enter in the configuration because it is in the Enter password screen and can't live without her.

  If anyone can help in this matter.

  Kind regards

  Dennis

  Hello

  Contact the manufacturer of the computer to this topic as it seems to be a BIOS password forgotten

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• Problem with HP CDDVDWTS-L633NSATA cd rom Device Driver

  I have a laptop HP G61-631NR my operating system is Windows 7 64 bit and there is a yellow triangle with an exclamation by my pc device icon indicates he needs in the event of problem and after bad shot the message I get is in the subject line.

  It of usually a known software conflict and is going through the Board of Directors will all computer makers due to a problem with several media burning / ripping applications being installed on your system.

  You can run this file, go online to the Microsoft site for a patch or fix it manually by following the instructions below:

  Manually remove the registry entries

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Computer laptop Compaq PresarioCQ40 using Windows 7 32 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section.

  My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  Hello

  Perform the steps in the link and check.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Hope this information helps.

• Adobe Stock to deal with my computer as a Mobile device.

  Adobe Stock doesn't let me download the pictures on my computer, as I downloaded before.  It maintains deal with my computer as a mobile device and not allowing me options that are available to them.

  Hello Jonathan.

  The engineering team has released a fix for this problem. The site of Adobe Stock seen chrome was wrong identify laptop computers of the user as mobile devices and only allowing the user to upload photos. If please try again and let us know if you have any questions. Thank you for your patience.

  EBQ

• Measurement of high frequency with the NI 9411

  Hello

  I would like to measure the frequency of a TTL signal with the 9411 OR in a cDAQ-9178 chassis.  1.6 at 48 kHz frequency range.

  With examples of Labview digital frequency meter, it is not picking up on the signal.  Any advice?

  Anna

  Hello!

  After talking to an applications engineer of NOR, I realized that the input signal must be less than 5 v.  In particular, the bass is between 0 - 0.8V and the top is between 2 - 5V.

  Once I have limited input to this range, the module of frequency meter picks up on the signal very well.

  Thank you

  Anna

• Synchronization of the inputs and outputs with different sampling frequencies

  I'm relatively new to LabView. I have a NOR-myDAQ, and I am trying to accomplish the following:

  Square wave output 10 kHz, duty cycle 50%.

  Input sampling frequency of 200 kHz, synchronized with the output that I get 20 analog input samples by square wave, and I know what samples align with the high and low output of my square wave.

  So far, I used a counter to create the square wave of 10 kHz, display on a digital output line. I tried to pull the document according to (http://www.ni.com/white-paper/4322/en), but I'm not sure how sample at a different rate than my clock pulse. It seems that this example is intended rather to taste one entry by analog clock pulse. There may be a way to create a faster clock (200 kHz) in the software and use that to synchronize the analog input collection as well as a slower 10 kHz output generation square wave?

  I eventually have to use the analog inputs to obtain data and an analog output to write the data channel, so I need the impetus of the square wave at the exit on a digital PIN.

  How could anyone do this in LabView?

  Hi Eric,.

  All subsystems (, AO, CTR) derive from the STC3 clocks so they don't drift, but in order to align your sample clock HAVE with pulse train that you generate on the counter, you'll want to trigger a task out of the other. I would like to start by a few examples taken from the example Finder > Input and Output material > DAQmx. You can trigger GOT off the train of impulses, start by Gen digital Pulse Train-keep -you probably already use a VI like this to generate 10 k pulse train. AI, start with an example like Acq Cont & chart voltage-Ext Clk - Dig Start.vi-you'll want to use the internal clock so just remove the control of the "Source of the clock" and it uses the internal clock. From there, simply set the "Source of the command" either be the PFI line generates the meter, or ' //Ctr0InternalOutput '-assuming that you are using the counter 0. You'll want to make sure that the start of the task HAVE faced the task of counter I is ready to trigger off the first impulse. They should be aligned at this point.

  For debugging, you can use DAQmx export Signal to export the sample clock - you can then brought the train line and the PFI pulse to make sure that they are aligned.

  Hope this helps,

  Andrew S