Measurement Studio 8.6 Setup error

Hi, I get an "unknown error" in an attempt to upgrade of measurement Studio 8.5 to 8.6, which causes the installation fails.  I tried to uninstall all products of OR, but this has not helped (error persists).  I use Visual Studio 2008 and 2005 (2005 given that I needed controls ActiveX Studio measures in my projects and I was told it was the only way to do it:  Anyone have any ideas?

So, I still is returned to the registry and removed any mention of National Instruments Measurement Studio or "nidaq.  This seems to have done the trick.  The MStudio and device drivers are install without "unknown error."

Tags: NI Software

Similar Questions

  • Error of measurement Studio 2010 FxCop: location of Assembly reference OR


    Please look at the snapshot attached for more details.  Basically, I have a project of Measurement Studio update, and I'm running FxCop on the compiled dll.  FxCop is looking for an older version of the NI.Common.dll that is referenced by OR. DAQmx.dll.

    Current versions of DLLs OR on the system:

    NationalInstruments.Common.dll -

    NationalInstruments.DAQmx.dll -

    Version of FxCop is looking for referenced by NationalInstruments.DAQmx -

    Any help would be appreciated!

    Thank you!


    Long story short, I advanced and uninstalled everything related to OR through the MsiBlast tool that I found on a different thread.  It turns out that some drivers were looking uninstall .msi files on a network drive that have since been moved to a different location.  Currently waiting for resettlement of Measurement Studio and I hope it will solve all my problems.  So I guess I'll consider cela a closed thread for now.  Thanks for all the help!

  • Measurment Studio 2015 Builder installer not conditioning not DLL Analysis.Professional


    My application uses the package MS Anaylsis I want is not included in the Installer Setup Builder installer. I checked the "OR Measurement Studio Anaylysis .NET language runtime 2015 for .NET 4.5" in the Section of the driver NOR.

    After the execution of the installation on a machine of own generation Win8-64 my application generates a "could not find error Assembly" to "NationalInstruments.Anaylsis.Professional, Version.

    A careful review of all available libraries does not suggest there is a more appropriate library to include in the build. My installation Builder is for a mixed environment, but my request is built as x 64.

    Can anyone suggest a solution?

    Thank you, Frank.

    Hi, Frank

    On your deployed machine, can you check the following directory and take a screenshot?


    It is possible that this happens because your application was built against the version of NationalInstruments.Analysis.Professional, but the version installs the OR Measurement Studio analysis .NET Language Runtime install. If this is the case, you can do two things:

    • (Recommended) Rebuild your application against the Measurement Studio .NET assemblies 2015 versions before you redeploy using the 2015 runtime installation programs.

    • Create an application configuration file that redirects 13.0.45.xxxx to NationalInstruments.Analysis.Professional.

  • WiX Installer Measurement Studio merge modules

    Is there a tutorial somewhere on how to create a WiX Installer for a Measurement Studio application similar to the Base article? I have an application Measurement Studio c# which I am creating a WiX Installer for and I have problems to get the measurement of inside studio merge modules. I get errors ICE30. I'm using WiX 3.0.

    Hi d_sdl,

    Our merge modules should work in WiX, as I have tested this several times. When you say that you have found ICE30, that fails your build? As you probably already know, one of the nice features of WiX is that you can set a flag so that whenever WiX compiles and links your source, it works ICES on them. This allows you to catch problems early in your development process. I guess you do is put the WiX linker fails if ICE warnings/errors are thrown. You can configure WiX for actions based on ICES advice you get. What is important is that you can turn off this setting, but it depends on how you are nvoking WiX (i.e. through NAnt, MSBuild, Votive, etc.). In any case, there are different ways to disable this option. What I would say is to disable the option, or be specific about which ICES to ignore. This decision would be to the you. The key is to understand what actually means ICES and determine if they are legitimate questions.

    ICE30 can indicate a variety of different things, but a common reason corresponds to the entries of the SFN. Some of our merge modules are always generated through Visual Studio deployment projects and VS created RFU very well. Thus, you're left with SFN entries duplicated in the MSM. Long file names are different, but the short file names are the same. WiX does this correctly which is nice, but unfortunately we can't convert some of these modules more MSM because of VS restrictions and limitations, that we found. It would be nice if better RFU created VS.

    Attached is a zip file that contains two projects that are:

    • C# project that produces the binary file that the Setup program will install
    • Project of WiX that creates the MSI file

    First, be sure to build the c# project. I tested the MSI that result, and it works very well on a target system.

    Note If you want to load the wix project, you must have the final version of Votive on your system.

    Best regards

  • Measurement Studio 2015 lack of reference to Assembly for "NumericControlCommands."

    I just migrated my project Studio 2012 measurement to Measurement Studio 2015 and udpated VS2013 references.  I get the following error in my XAML

    Type reference cannot find the named type ' {} NumericControlCommands'.

    It turns out that it was an indirect exception related to a few of my files that I still need to change "NumericControlCommands" to "ControlCommands".  The project seems to work fine now.

    Thank you

  • License with Measurement Studio and Visual Basic 2008 Express problem


    I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008.

    I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized."}

    Does anyone have an idea?

    Thanks in advance!


    Here is the full error message:

    System.TypeInitializationException wurde nicht Festival.
    Message = "Der Typeninitialisierer as 'NationalInstruments.Analysis.Dsp.Transforms' hat eine exception caused."
    Source = "NationalInstruments.Analysis.Professional"
    TypeName = "NationalInstruments.Analysis.Dsp.Transforms"
    BEI NationalInstruments.Analysis.Dsp.Transforms.RealFft (Double [] realData)
    EIB LDS. LDS_Form1.ButtonFFT_Click (Object sender, EventArgs e) D:\devel\LDS\pc\LDS\LDS\LDS_Form1.vb:Zeile 1700.
    bei System.Windows.Forms.Control.OnClick (EventArgs e)
    bei System.Windows.Forms.Button.OnClick (EventArgs e)
    bei System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
    EIB System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
    EIB System.Windows.Forms.Control.WndProc (Message & m)
    bei System.Windows.Forms.ButtonBase.WndProc (Message & m)
    bei System.Windows.Forms.Button.WndProc (Message & m)
    EIB System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
    EIB System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
    bei System.Windows.Forms.NativeWindow.DebuggableCallback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
    bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
    bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
    bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
    EIB System.Windows.Forms.Application.Run (ApplicationContext context)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel)
    BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (String [] command-line)
    EIB LDS. My.MyApplication.Main (String [] Args) in 17d14f5c-a337-4978-8281 - 53493378c1071.vb:Zeile 81.
    bei System.AppDomain._nExecuteAssembly (Assembly, String [] args)
    bei System.AppDomain.nExecuteAssembly (Assembly, String [] args)
    bei System.Runtime.Hosting.ManifestRunner.Run (Boolean checkAptModel)
    bei System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly)
    bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext, String [] activationCustomData)
    bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext)
    EIB System.Activator.CreateInstance (ActivationContext activationContext)
    BEI Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone)
    bei System.Threading.ThreadHelper.ThreadStart_Context (Object state)
    bei System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
    bei System.Threading.ThreadHelper.ThreadStart)
    InnerException: System.ComponentModel.LicenseException
    Message = "NationalInstruments.Restricted.AnalysisLicenser is unlicensed."
    Source = "NationalInstruments.Common"
    AT NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)
    BEI NationalInstruments.Restricted.LicenseBase.a (String Type A_0, A_1, A_2 object)
    BEI NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)
    AT NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)
    BEI NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)
    bei System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, Object instance, Boolean allowExceptions, license, licenseKey, String & license)
    bei System.ComponentModel.LicenseManager.ValidateInternal (Type type, Object instance, Boolean allowExceptions, license & license)
    bei System.ComponentModel.LicenseManager.Validate (Type type, object instance)
    EIB NationalInstruments.Restricted.AnalysisLicenser... ctor()
    EIB NationalInstruments.Analysis.Dsp.Transforms... cctor()

    Hi Andreas,

    It is scheduled for any Visual Studio Express edition, because these editions do not allow 3rd party integration. So, you will need to perform some additional steps to get a license to work properly.  Refer to the Measurement Studio for Visual Studio Express Editions support KB (in particular, paragraph 2 pointing you to our help).

    Best regards

  • Measurement Studio 2015 Installer creator vs WIX

    What is the reasoning behind the development of the new measurement feature Studio Installer?  I have never had any problem using Wix for mixed deployment c#, C++ that use Measurement Studio products.  It just seems like an odd sense to send the development resources, opossed say, improve support WPF?  Or documentation of the product and samples for WPF?

    Mark DeArman

    Hi, Mark

    The reasons that we have dedicated development resources by creating a builder application to install for Measurement Studio are:
    1. Once Visual Studio has diminished in favour of their native installation project, the number of support requests involving the deployment of Measurement Studio has increased considerably.
    2. Apart from the Setup project, the only other method of deployment which Measurement Studio is fully supported is Windows Installer XML (WiX), which was not well received by customers. Almighty, WiX has a steep learning curve, even to accomplish a simple deployment.
    3 measurement Studio does not support InstallShield, among other popular solutions to WiX for the deployment.
    4. the supported deployment methods, no guide customers what drivers OR and components attached to their application to ensure good run time behavior.

    Builder installer helps to solve these problems and has already received positive feedback from many customers.

    Please let us know if you have any other questions about the Builder installer; We would be happy to help you!

    Thank you

  • problem reading DAQmx using Measurement Studio 2010 (even with examples OR)

    Hi all

    I'm reading the voltage using a map of NOR-DAQ-6211 with Measurement Studio 2010 SP1 V9.1.0.204. using Visual Basic .net 2010.
    When I create the task of data acquisition with the measurement studio Wizard, (Assistant DAQ) everything works fine. However, when I try to create my own task player in looking over the "ContAcqVoltageSamples_IntClk" everything I read is a value in the range of Vmin to Vmax (or to Vmin Vmax) and then she stays there no matter if I change my diet. Vmin and Vmax does not yet match my values of voltage. (It acts like that on my application and example of OR) I guess I missed a few initial settings. The config of AIChannel in two projects (manual task and Augo-Gen) use AIChannelConfig.RSE (I tried other options, but no luck).

    The only wiered thing is that when I open examples of projects, VS does not recognize the object references of NOR. Workspace names DAQmx. When I check the references, it shows that it does not find the reference to NI.Common. To make it work/compilation, removed from the solution and I again added. (I don't think this is related, as it seems that there are available tensions but not read correctly).

    The other thing is that my input voltage is 3 or 0 volt. When you use the manual DAQtask, when I toggle the voltage, the values displayed change momentarily the order of 0.001 Volts and then go back to their previous values of Vmax and Vmin.

    Is there more information I can provide?

    Help, please
    Thank you

    Yay! I just solved my problem,

    From the first moment I knew there was something fishy about this AITerminalConfig thingy! I made two errors:

    1. in the code example Configuration AI is encoded: CType (-1, AITerminalConfiguration) that caused the code example does not work for all channels to HAVE it

    2 - also, I have in my code, I had put this config to the correct value, but I was checking ai0 all the time while the signal was on another I. I was under the impression that since the example does not work for all my channels, then probably my code does not work as well.

    If after changing the line in the example for the correct terminal configuration settings, he began working for the AI number I was looking for too much and I found that my code worked for my AI # correctly from the beginning. I wasn't just to see it!

  • Measurement Studio 2015 under VS2012 c# IntelliSense does not

    I upgraqded my MS2013 MS2015 and now intellisense on MS all controls is no longer works. For all other controls language intellisense works normally. When I open an existing project using MS control (Gauage, plots, etc.) all the properties of control NOR and methods are of red color. When I press period after an instance control no properties or methods appear. Exisitng with methods and properties valid projects still compile without error.

    Hi Frank334,

    I tried to recreate what you see by creating a project using measures Studio 2013 for Visual Studio 2012 that mimics the code in your screenshot, installation of measurement Studio for Visual Studio 2012 2015 and again opening the project. Here's what I see:

    Everything seems to work. Can you walk us through the process you used to update to Measurement Studio 2015? Have you tried anything to refresh the IntelliSense information for your project? I found this article of stack overflow that can help:

  • Problems with ASP Master Page for examples of measurement Studio Web Form

    I loaded Measurement Studio Web form examples (ASP projects) in VS 2008. Running within VS proceeded without problems. Then I built and published on IIS 7 for ASP pages

    wwwroot / vb , for example.

    Opening with the Internet Explorer browser, the home page is OK: localhost / vb. However, all of the examples under come with the following error:

    The file ' / vb/Annotations/Examples.master' does not exist (being one of the subpages Annotations)

    I looked in several discussions on the Web and found no logical explanation why this is happening

    Finally, I understood NOR appearing Web controls do not on a remote browser.

    The cause is IE, and I am currently using version 7.

    With Google Chrome, for example, everything works OK. Other Web, including Telerik control providers, are complaining about visibility of IE 'spoil' controls.

    Change some property settings for a Web control can solve the problem with IE

  • Measurement Studio 2010 with Visual c# Express 2010

    I don't know if this is supported, however, I get this error when you try to install the Measurement Studio 2010 Visual Studio integration.

    2 error: Cannot perform action Measurement Studio Visual Studio 2010 integration configuration.

    I can select the VS c# Express items in my screenshot. But they do not appear in my Inbox tool for me to use...

    Can some help me please? I'm new to all this...

    Visual Studio Express Editions of Microsoft Visual Studio do not support the Measurement Studio integrated tools. Controls support Measurement Studio for Visual Studio Express Editions KB.

  • Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

    Google Chrome Installer failed to cache downloaded Setup error: 0 x 80070002

    I'm trying to reinstall Google Chrome on my Windows 7 Home Premium Service Pack 1 computer laptop.  I uninstalled google Chrome and tried to reinstall it on my Windows 7 laptop.  I can download the installation file or install dynamically without having to download the file.  The installer of Google Chrome runs, but at the end of the operation, I receive the error message 'unable to cache the installation program downloaded. "Error: 0 x 80070002.  I tried to install Chrome with IE9 and Firefox 10.0.3

    PC: Dell Studio 1557
    Processor: Intel Core i7
    RAM: 4 GB
    System type: 64-bit operating system


    1. are you able to install any other program normally?

    2. don't you make changes to the computer before the show?

    Please follow the steps below.

    Method 1:

    Run the Microsoft Fixit from the link below.

    Solve problems with programs that cannot be installed or uninstalled

    Method 2:

    Put the computer to boot and then try to install Google chrome.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    NOTE: after the troubleshooting steps, please return the computer to start as usual (see step 7 link mentioned above)

    Method 3:

    Follow the instructions in the link below.

    I suggest also please contact the support team of Google for assistance.

  • ConfigFree on Satellite A100-413 Setup error

    Helle everyone,

    I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

    So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
    It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

    Now if I whas fix included in configfree (or confree)
    So thinking, I downloaded the zip and run the insite facility there.

    The result is an error "the installation image is not correct.

    All knows how to get this Setup working of our get this program I whas talk on my computer?
    Excuse me for my bad English

    You talk about the Toshiba Configfree application.
    I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
    You can find it on the page of the Toshiba driver A100 section.
    But there are 3 different satellite A100, so be sure that you have chosen the right way.
    After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

  • Siemens simatic wincc SCADA and LabView/Measurement Studio

    Hi all

    I am currently working on the design of wireless data acquisition system using materials. Input signals captured by wirelessDAQ NOR will appear eventually in WinCC from Siemens SCADA system.

    Is there a way to make this configuration? I thought to is to develop software for the acquisition of data using LabView/Measurement Studio and link code to WinCC via Visual Basic (for example via DAQmx). Thanks for all your comments.

    Hi kid_26,

    I'm sorry.

    It is the only option.

    If you press the cost, write a VB6 to call DAQmx is an option.

    Sincerely, Kate

  • Measurement Studio for visual studio 2008 8.1.2

    Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.


    If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

    In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

    If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

    Also, you should be able to create a box Tools tab and add controls.

    If you try to do something else, could you give more details on exactly the type of project you want to create?

    David Rohacek

    National Instruments

Maybe you are looking for