Measures of current between 4071 and 2575 sometimes not correct

I use mode of handshake with a PXI-4071 scan list and an SMU-2575.

The DMM is current and the MUX is in mode 1 x 196.

When running the scan list, I have rarely (randomly) get a very small extent to the nA au (when to 4-20 MA). I'll run the scan list again and that the channel will be correct, so it seems not to match a channel.
I tried to increase the time of settling of the DMM and the MUX, but have had no effect.

Any help would be great.

Thank you

Caleb Swieson

After further tests, we determined that it was indeed the devices to measure who pulled out the very low currents. So it wasn't the fault of the hardware. Oops

Tags: NI Products

Similar Questions

  • I can convert pdf to word format adobe acrobat, DC but my version of word is not correct because after conversion, fonts and lines are not correct in the original pdf document.  I am currently using version 6.1 of windows 7 service pack 1 build 7601. Is -

    I can convert pdf to word format adobe acrobat, DC, but my version of word may not be correct because after conversion, fonts and lines are not correct in the original pdf document.  I'm currently using version 6.1 of windows 7 service pack 1 build 7601 Home Premium. Is it possible that I might have to upgrade my windows 7 in order to get good conversions of PDF files in word files?

    No, it won't be linked to your version of Windows. Probably, you wait too long. Conversion cannot be perfect except for the files very easy.

  • Thunderbird does not accept the user name and password, an error that the user name and password are not correct

    Thunderbird esteem username and password are not correct,

    Gmail account?

  • Don't stand less why between Apple and HHGregg can not help me get my I pod touch unlocked granddaughters and I had with the two of them and still cannot get it fixed and I even had a year two extend baterija top just for FaceTime

    CCan can't receive nothing fact tru Apple or HHGregg trying to get my granddaughters I pod touch unlocked and I even had a hold of both of them and he did not a darn bit good even with a warranty of two years so I think it's a shame, you can not nothing done on the side of nothingness and me *.

    Just what is your problem?

    You run into the lock of activation?

    Find my iPhone Activation Lock

    Did you buy it from HH Gregg?

  • created and last_ddl_time are not correct

    4.1beta: the query to retrieve the stats is not correct, as using "rownum = 1" instead of use the object_type

    test case:

    Select * from user_objects where type_objet = 'INDEX' to order of creation;

    Object_name: PK_DEPT

    Created: 31 October 14

    Now, create a table with that name

    CREATE TABLE PK_DEPT (x number);

    Browse the index, see PK_DEPT index, you will see that it was created today, sometimes. It does not reproduce at will (where rownum = 1 is somewhat random)

    Select o.created, o.last_ddl_time, i. (select owner, object_name, created, last_ddl_time sys. Dba_objects where object_name =: OBJECT_NAME and owner =: proprietaire_objet and rownum = 1) o, (select * from sys.) Dba_indexes where owner =: proprietaire_objet and index_name =: OBJECT_NAME) I where o.owner = i.owner and i.index_name = (+) o.object_name (+)


    Must read: and object_type ='INDEX'...

    Fixed for ai2, but you shouldn't tables and indexes the same name

    -kris

  • I have an iPad 2 and one row of keys do not work. I forced a reboot and it has not corrected it. Any ideas?

    I have an iPad 2 and one row of keys just stopped working.  I tried to force a restart and it has not fixed the problem. Any ideas?

    If you rotate the camera in landscape mode, change the key group that will not work, in correspondence to the East of the screen does not not in portrait mode? If so, then it could very well be a hardware error. If the force restart did not work, your next troubleshooting steps would restore backup, restore to factory. Until you if you want to go too far, or all simply make an appointment at the Apple Store nearest to have the material examined.

  • DirectLink between SpeedGrade and first will not work

    Whenever I try to send my first sequence to SpeedGrade via DirectLink, SpeedGrade tells me that either the project was saved in a newer version of first or SpeedGrade and don't open them. I installed the latest versions of SpeedGrade 2014 and 2014 CC first. How can I fix?

    Sounds like one of two things, the most common is that the CC app does not make his facts straight, and one who is NOT the last version-dot. Happened once last year. Others... your programs can be do not see each other properly due to defects of installation or registration.

    The number of "CC2014.x" is not one that we need to see to check that it's the build number. Located on the lower left corner of the "on...» "dialog box. PrPro, "help-> about" and look in the lower left corner. In SpeedGrade, the 'key' (settings), the upper tab icon... 'About'... and you'll probably need to scroll down using the almost invisible slider on the right edge of the box until the version in the lower left corner numbers.

    Currently there are current generations for the main Adobe MAC...

    PrPro: 8.2.0 (65)

    SpeedGrade: 8.2x51

    Legacy: 13.2.0.49

    Hearing: 7.2.0.52

    They don't actually make it easy to make sure "we" on the equivalent versions, doesn't it?

    The difficulty no doubt for the question is to use the instructions found here and Adobe CC Cleaner app...

    https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

    to uninstall & reinstall probably as well the application of CC & SpeedGrade... or PrPro Office... If not the current build.

    If both ARE of the current generation, run the vacuum cleaner and uninstall ALL.

    In both cases, after the cleaner uninstall, reboot & download a new copy of the CC itself, application after installation & signature in use by both download/install fresh copies of the other program. NOTE: you be NOT impatient as... me! I tried once to start another download program while it was not yet completely installed & done... and... for my troubles... could completely wipe everything and reinstall. I do not recommend this...

    Neil

  • convert between utf8 and we8mswin1252 does not work properly

    Hello

    When debugging an application, I wonder about the conversion SQL function. Then do some tests with accents.

    * 1. Test with u * (UTF8 = 0xc3bc = 50108, Win-1252 = 0xFC = 252):
    Select ascii (convert (chr (50108), 'WE8MSWIN1252', 'UTF8')) double;
    Result = 252
    == > Everything is OK. That's what I proposed.

    * 2. Test with a * (UTF8 = 0xc3a4 = 50084, Win-1252 = 0xE4 228 =):
    Select ascii (convert (chr (50084), 'WE8MSWIN1252', 'UTF8')) double;
    Result = 0
    == > What is? I suggested 228?

    I tested two server Oracle (lokal 10.2.0.2 with UTF8 and apex.oracle.com) with the same result.
    Can someone explain this behavior?

    Yes, I can. The problem is to try using ASCII() in a UTF8 database to get a binary code in a string to WE8MSWIN1252. You must understand that the CONVERT function is should not be used for normal operation in the database. The channels it produces are VARCHAR2 and VARCHAR2 should always be in the database character set. If the CONVERSION target character set is not the database character set, the returned string is generally not valid (even if it contains a reasonable sequence of bytes in a character set) and may not be used in other SQL functions. CONVERT is a feature inherited from Oracle6 and must be used for the tasks of repair special only.

    It happens that ASCII('[0xFC]') returns the correct result because 0xFC is not a valid in UTF8 code and happens to be interpreted "as-is" of the current implementation of ASCII, while ASCII('[0xE4']') does not return anything because the database recognizes the 0xE4 as the first byte of a UTF-8 of 3 bytes code and returns 0 failing to have the two remaining bytes. That's generally what docs call 'undefined results.

    The path is valid only for watching the result of the CONVERSION would be to use the DUMP function.

    -Sergiusz

  • UPS (uninterrupted power supply) service currently stopped message and battery is not charging on dell inspiron e1505.

    battery said zero percent. had no problems with the battery before this and no sign of get low. He held the privilege for approx. 4-6 hours use and if it is not used.

    Hi teresamcleod,
     
    As it is a hardware related issue, your best bet of contact would be the manufacturer to solve this problem.
  • Switching between Br and Lr; Why not Lr 'Refresh' the files imported?

    Maybe I'm looking for something that is not possible; After a few days of research on the internet and asking to Lr - pro I still not answering my question, so now I'm a fall here... hope someone can help me :

    As a bridge-addict, I'm learning to work in Lightroom, as I discovered that Lr is very useful to treat a large number of photo's in no time.

    But once an addict, always an addict, then I start my Bridge workflow > full screen I inspect all the photo and classify those I want to develop with a star.

    Then, I go to Lr and import the card with photo, including non-classified.

    Once the work is finished, I went back to the bridge and selected again (the new selection had a different purpose, so I filed with a different number of stars).

    Back to Lr, I wanted to "Refresh" the imported card, so I could filter on the new classified photo.

    And here's my problem: this is not possible.

    I'm bored of mode 'Refresh '.

    Synchronization performed my first selection cancelled.

    Am I in train/wanting something that Adobe has not yet invented?

    There is no automatic refresh of the kind you're talking about in Lightroom.

    You can cause manually the update happen by using the menu command Lightroom metadata-> read metadata files

    Tips: the idea of doing some things/metadata in Bridge and some things/organization of metadata in Lightroom is a bad idea, because of the issue that you saw... programs don't talk to each other, except by a manual step in Lightroom, and if you forget to do this, all of a sudden you have two different sets of metadata for the concerned photos. If you use Lightroom, then use Lightroom for ALL (Yes, JUST like 100%) management tasks and photo metadata.

  • HP mini 110-1125NR: enter the current password: happens and I do not know.

    Password check failed

    Fatal error... System stopped

    CNU937DGK4

    Hello

    Enter e9lofxthsv (3rd character is a lowercase L)

    Kind regards

    DP - K

  • Vista SP2 does not install, error code 800f0900 and KB947366 does not correct.

    I tried everything above, and nothing works, please help.

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Time indicated on incoming and outgoing emails not correct with real time sent or received

    Time that appears on all my incoming emails indicating when they were sent and the time on my outgoing e-mail is incorrect and does not take account of real time.

    How can I fix it?

    The time displayed is applied by the email server - be it MSN, Yahoo!, GMail, or somewhere else.  If it is showing the wrong time zone for you, then you should check the settings of your account on the server and if he knows what time zone you are in. - B-
    http://www.officeforlawyers.com
    Author: Guide to counsel for Microsoft Outlook

  • Special Chr (189) characters and characterset is NOT correctly displayed on the page

    I have a 1/2 special character, stored in the database (Select chr (189) Anom double ;))
    I read (using the PL/SQL) special characters from a text file and insert into one table.

    Select dline from MyTable (I see the 1/2 in the table).

    Problem is I can't get the 1/2 for display on a web page. On the contrary, it appears as "A"?

    How can I get special characters (IE > 127) is displayed correctly on the web page?

    I'm using classic ASP.
    I put
    < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 ">"

    I tried to do a convert (I tried in many ways, this is just 1 example)

    mySql = "dline Select convert (dline,'WE8ISO8859P15 ','WE8MSWIN1252 ') from myTable"


    My version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - production
    PL/SQL Release 10.2.0.4.0 - Production
    "CORE 10.2.0.4.0 Production."
    AMT for 32-bit Windows: release 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production

    My game:
    -WE8MSWIN1252 NLS_CHARACTERSET
    -NLS_NCHAR_CHARACTERSET AL16UTF16


    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS.,.
    WE8MSWIN1252 NLS_CHARACTERSET
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI. SSXFF AM
    NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
    NLS_DUAL_CURRENCY $
    BINARY NLS_COMP
    NLS_LENGTH_SEMANTICS BYTES
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_NCHAR_CONV_EXCP FAKE
    NLS_RDBMS_VERSION 10.2.0.4.0

    TIA
    Steve42

    Published by: Steve42 on May 13, 2013 15:19

    Hello Steve,.

    This is the forum for the tool {forum: id = 260}.
    Please mark this question as answered, while others know that they can ignore it. Then validate again in {forum: id = 75}.

    Concerning
    Marcus

  • OCD and footers do not correctly generate in print output

    I use RH8. Until yesterday, was able to generate output .doc fine. We usually run a macro to clean the OCD and footers. Yesterday I had to update an older help created in RH4W file. I made my changes, closed RH4W and returned to work in RH8. My .chms generate very well. This is my file .doc on paper which translates as no creation of OCD or footer.

    Here's what looks like one of the footers and the table of contents. If anyone can offer any suggestions (I am at a loss - even removed the ssl and started from scratch), I would be grateful.

    toc.jpg

    footer.jpg

    The problem is in your Word settings, not RoboHelp. It seems that you have configured to display Word field codes.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

Maybe you are looking for