Media Center and ATI TV Wonder 600 PCI

Similar Questions

• problem with media center and digital map cable ATI

  Installed a tuner with a media center W7 ATI digital cable.  Cable company (Cablevision) active the card and check the signal, all OK.  Several problems. First of all, on channels it tells me that I need to activate windows that has already been done.  In the second place, on channels not premium I only get standard definition not hi-def.  With my old card of clear QAM tuner, I had hi-def on non coded station.  Verify all the information cable card and everything is ok.

  Did you run the digital cable Advisor in Media Center Extras Gallery and
  enable digital cable support?
   
  If this has been done with success and you still have problems:
   
  Where did you get the ATI DCT and he points out what firmware? You can check
  This in the network window.
   
  Saturday, August 28, 2010, 02:33:01 + 0000, Bob 3100 wrote:
   
  > Installed a tuner with a media center W7 ATI digital cable.  Cable company (Cablevision) active the card and check the signal, all OK.  Several problems. First of all, on channels it tells me that I need to activate windows that has already been done.  In the second place, on channels not premium I only get standard definition not hi-def.  With my old card of clear QAM tuner, I had hi-def on non coded station.  Verify all the information cable card and everything is ok.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Unable to sync music using Windows Media Center and Windows Media Player will not open

  Media Center will not sync music!

  I recently opened Media Center and I had no music in the library. I have constantly played music from the library so I didn't know what is happening. When I try installing the library again once it tells me that a necessary component for Windows Media Center is not available. I have not changed or downloaded something different. I went to check if Windows media Player is the multimedia file sharing. The message I get from that is, basically, that something is missing.  Now my Windows Media Player is not even opened. I wonder if my Zune Player (80 GB) has nothing to do with the problem. I charge my player when this has happened, but I do this all the time so I am at a loss. I went to the page "problem reports and Solution." It is the symbol of the Media Center window and says that the problem is caused by Windows. The solution is to update to windows; which I am fully updated. I tried to restore the system to an earlier date, but that doesn't work anymore. I'm at a loss to know what being of any help would be appreciated.

  As a side note video playback, TV and photos also works very well in Media Center.

  Thank you

  Shay

  Thank you, Shay

  Hi Shay,

  You can try the following steps and check the result:

  Step 1: Run the sfc scan to repair system files missing and corrupt.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, visit this link:http://support.microsoft.com/kb/929833

  If the problem persists, try the reconstruction of the library:

  Step 2: Library rebuild Windows media player.

  This problem can also occur if the library is corrupted. Rebuild the library and check if this solves the problem.

  Follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  You can also view the following green button and check if it helps:

  http://thegreenbutton.com/forums/t/38766.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Office, all icons display the logo of Media Center and open in Media Center

  original title: I went on the windows media center site now all my displat the globeand media desktop icons, I can't delete and allof them light up to media library when I click it

  I recently did a system restore to a previous time.i a site in windows media center and I don't know what I did but now all my desktop icons display the globe Centre of Neda and I can't do something because it keeps going mto windows media center

  Hello

  1. what operating system do you use?

  2. you have an error message?

  I suggest you follow the link and check.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

• How to take pictures of windows media center and put them on your xbox to use as background really stuck

  hey im trying to get pictures of the internet ive saved on my laptop on my xbox for new backgrounds I have done before with a usb key, but it doesn't seem to work now. Ive connected my xbox 360 to my windows media center and I can't seem to find how to save the image on my xbox I could really use some help ive been tempting centuries now and his frustraing really thanks ():

  Hi Josie,

   

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

   

  You want to add an image to the background of the Xbox.

  You can refer to the section set an image as the background of Xbox 360 Dashboard site:

  http://support.Microsoft.com/kb/909161

  You could get more support on the support site:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

  For any question related to Windows, feel free to contact us.

• Windows Media Center and Windows media player 11 will not work on my Gateway (Vista) computer

  On my windows media player, I get the following comment after I try to read the dvd:
  Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  On my media center to windows, I get the following comment:
  The dvd can be used by other players, need to change resolution b/c it is too high.

  But Tuesday, I played the DVD without problem and now, I am confused and I need help to understand what is happening.

  Hello texanbelle,

  Thank you for using the Microsoft answers Forum.

  I am including instructions below a scan to help repair the system files related to some components of Windows, including Windows Media Center, and Windows Media Player.

  Repair Windows Vista Media Center files

  You can use the following steps to repair files that are part of Windows Vista Media Center:

  1. click on the Start menu, choose all programs, then Accessories, then right-click on the item to the command prompt and select run as administrator

  2. click on continue to allow it to open a prompt with administrator privileges

  3. run this command in the cmd prompt: sfc/scannow

  4. the cmd prompt should list text stating "start system analysis. This process will take time. »

  5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions

  6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct

  7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors

  8. after fixing errors that are found, try to use Windows Vista Media Center again.

  Fix Windows Vista Media Center registry entries

  Unfortunately, there is no easy way to fix key/registry values that are installed by Windows Vista, as there are files.  If you want to try to repair the registry values/keys that are part of Windows Vista Media Center, you will need to re-run the installer of Windows Vista operating system and repair the operating system.

  Try this and tell us if it helps with your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Connection between Windows media center and Xbox is lost when you try to watch movies

  I start watching movies via the windows media center and after a few minutes it turns off and it says that the connection between my pc and the xbox has been lost, I have previously watched movies like this with no problems and have not changed the settings of any sort help it would be appreciated

  Hi samperry,

  What is you receive the exact error message?

  Method 1: You can follow the steps mentioned in the article below
  What happens if the connection to the Windows Media Center computer is lost?

  Method 2:  You can see the steps outlined in the article below, which deals with a similar question

  Error: Session Terminated (when connecting a console Xbox 360 to a computer running Windows Media Center)
  http://support.Microsoft.com/kb/911123

• Media Center and WMP 12 does not not my MP3 files, two strange errors

  Hi all

  I am running Windows 7-64 bit. I have set up my Media Center and the folder where are all my songs. Then, I used the Media Center Extender to connect to my xbox. I went on the xbox and liked my music through my sound system.

  Now, when I try to listen to my music on my computer Media Center or WMP 12, I get the following errors:

  Media Center: the file you are trying to play (insert file path) is either corrupted missing or in a place that is currently not available

  WMP12: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  I can play my music on my PC with the help of another player as my Rhapsody Player. It seems to me that Media Center and WMP 12 does not like to play my .mp3

  I'm leaning towards a problem with a codec, but how you updated codecs on WMP 12 and Media Center?

  Or everyone does not think that there is another type of problem?

  Good people. I figured this out, and I hope this will help some of you. I have his next card: Creative Labs Audigy 2 ZS

  I went to control panel > Sound > playback > speakers

  I went to the Advanced Settings tab and unchecked Audio enhancements allow

  WMP12 restarted, a popup told me that there was an error with a plugin and disabled the plugin, and soon I was dancing on top of my desk.

  I found the information at the bottom of this thread:
  http://social.technet.Microsoft.com/forums/en/w7itpromedia/thread/584e73b8-7a4b-4E39-b2cc-51bbda1875a9

• Media center and ipod - (quick time player)

  Hello. Media Center works fine, until I installed ipod and player quick time which is part of the itunes put in place.

  Now DVD will play is no longer in the media library. I just get a blank black screen. I tried to change settings in quick time player and entered my types of file, computer, tools, folderoptions to see QT's striking anything, it shouldn't, but no joy at all.

  DVD will play when the laptop turn on but nothing plays when it is started. ???

  Hello

  Can watch you DVDs using preinstalled InterVideo WinDVD player?

  It's very strange question. I can t believe that installation of Real player has a certain influence on WMCE.

  If you want to check previous status again try to use the System Restore tool.

• Qosmio F10: Configuration of Media Center and color

  Hi @ all

  I need to configure color and other settings such as brightness, black and white tones and so on to the windows media center of my qosmio f10.

  Media Center tells me to look for the buttons on my computer. I tried to use each button of my laptop and remote control, but I couldn't change any setting.

  did someone knows with the buttons, I can do these settings?

  Hello

  Try again with the color of the graphics card settings (I think this device is NVIDIA one). Go into the display properties > advanced > GeForce FX tab. You will find color correction settings.

  Good bye

• XC-605 and ATI RADEON HD 3450 PCIe x 16 DMS - 59 S-VIDEO 256 MB low pr

  Hey people,

  I recently bought a XC605 and tried to install a PCIe ATI RADEON HD 3450 graphics card. Unfortunately it does not work. I already read a few items here in the forum, but they do not solve my problem. The card works fine in other machines. I also tried the card with a different (higher) power in the XC605, the problem remains the same.

  The problem is that if the system starts with the new installed card, I don't get no video on any location VGA. I already checked the BIOS twice, but there is no switch, which could solve the problem.

  Any help is appreciated.

  See you soon,.

  Cink

  I just fixed the problem. An update of the bios was necessary.

  See you soon,.

  Cink

• Vista Media Center and my Xbox 360 extender connection

  Hi I have a problem connecting my xbox 360 and my windows vista media center. Everytime I try I get the message saying that it can't find the range extender and suggests that it is one of the following three things

  (1) the Extender is turned on and connected to the network

  It's on and it appears as an icon of the xbox 360 in my network on the vista machine and can connect to the internet, so I guess the network very well.

  (2) that the code is correct

  It's that I checked it about 30 or twice now.

  (3) UPnP does not work properly

  I guess that's the problem but cannot figure out how to solve. I have a BT Homehub router. I've implemented through active UPnp. I even tried to disable the firewall completely on it and on vista, it made no difference to the port forwarding doesn't seem to be the answer.

  Help please it is one of the main reasons I got an xbox 360 and vista

  Paul.

  Paul Bradbury,

  There are always a few things that do not exist to try, so we can solve your problem. Below you will find a link on your specific issue. There are about four troubleshooting methods that you can try. Please let us know if it worked for you, and if so what method has solved your problem.

  http://support.Microsoft.com/default.aspx/KB/932159

  Let us know if you additional questions or concerns.

  Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Only get a white screen with Windows Media Center and Windows Media Player

  My Center & Windows Media Player do not work. Only, I get a blank screen. I would like to reinstall, but I don't want to reinstall all Windows Vista Home Premium. How can I reinstall the only Media Center?

  Hello, Rob Davis,.

  Please check Application, system logs and Event Viewer Security for possible errors for the time that you tried to connect to Windows Media Center. Go to the computer and right click. Select manage. Then select Event Viewer, and then click Windows logs. In addition to this, you can check the newspapers of Media Center under the Application and Services logs. See if you have errors on Media Center.

  Then, update your most current video driver. If you have an OEM computer, go to the site such as Dell or Acer, etc. Download the latest for your computer, such as the graphics drivers or video drivers.

  Please answer back with an update and let us know if it helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Media Center and a PS3

  Hi, I'm looking to set up my PlayStation 3 so it can be used with my computer screen, since I don't have the budget to afford a big HDTV.

  I have the required monitor and is HDCP compatible, the only problem that I face now is the sound. Many guides suggest I use a RCA adapter, but I don't know if that I need.

  I have a HP Media Center m8120n PC. I've taken audio Note Although the front of the PC and the back of it, RCA. Can I avoid having an adapter like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16812200418and simply plug the standard PS3 RCA cables to the red and white audio jacks on my PC?

  If no clarification is necessary, I will be happy to. Thanks in advance.

  Yes, it would work, but as it was mentioned above... There are 2 to 3 seconds of latency... which means if you were playing a game of first person... Imagine playing online and have a second 2-3 behind trying to shoot someone... you'd be dead for 2 seconds until you know that you have been...

  This is how it will be.

  Bill

  and not quite as long time employed as SS above

• Windows 7, Windows Media Center and the library of music/photos/videos folders

  I like the 'Libraries' feature in Windows 7.

  You know the one - one which includes "Public Images" and "My pictures" and what I want in a single 'Photos' folder in Explorer.

  However, it looks like Windows Media Center is tired directly according to the definitions in the library of my user id.

  If I remove 'My pictures' library of Windows Media Center, or even from my XBox 350 Media Center Extender in the living room.  It removes a library of images for my UserID on the PC.

  It's embarrassing. Because, in general, I want only the media center to search for media in public folders. But when records navigation using windows Explorer that I want to see too well 'My' and 'Public' files aggregated in libraries as usual.

  To sum up: how to configure Media Center to analyze only the public folders without changing the definitions of on my PC library to contain only public folders?

  If this can be done - can I at least do so the Extender sees only public folders and not mine, once it is configured? (I figured out how to do this, but it's a pain - add a new user name to the computer - configure the Extender by using that user - and then the extender will see not all documents under MY personal login at least.)

  Any suggestions?

  Hello

  I am sorry to say that there are no options to make the changes you need. Scans of Media Center places appears, at this point, is by design.

  Kind regards.