Media Center Download correct the channels but totally wrong listing of programs.

Similar Questions

• Cannot get remote windows media center to change the channel on Cisco DTA50! Help!

  During the TV signal together towards the top there is no option for "Cisco".  Then I select "Unlisted" and setting up tells me there is nothing that can be done and leave the whole upward. Media Center will learn the remote control IR codes because it does not pick up the DTA remote this process.   I was finally able to get a "tv signal" implemented by choosing comcast, although this isn't my cable tv company, , but still the wmc remote will not change channels on the DTA cisco. The wmc remote works fine and changes channels in the real of windows media center, but because the string must be changed on the real DTA there on some channel I entered on the DTA remote. Since I use record TV WMC, indicates on the guide, it's impossible, unless I can get the DISTANCE WMC, put in place to change the DTA channels!

  I need help!

  I was finally able to set up the remote after tweaking autour with IR receiver. I have even connected infrared diffuser!

• My Windows Media Center Download the latest TV programming guide

  With the help of Win 7 Home Prem SP1 64-bit.

  Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

  I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

  How to fix?

  PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

  Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code

  Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

• My wallpaper appears only in the extended format. I want to display a .jpeg file into the center channel mode. I click on center and save the changes, but he remains in stretch mode...

  My wallpaper appears only in the extended format.  I want to display a .jpeg file into the center channel mode.  I click on center and save the changes, but he remains in stretch mode...

  HP technical support solves the problem for me with a patch: I'm sorry that I don't remember all the steps they walked me through but the patch was SP45575. EXE.   It was working fine.  Good luck

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows Media Center, download Guide Erroe Code 3

  My Media Center does not download the info guide, claims error Code 3

  Hi susanne1,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3 when was the last time it was working fine?

  Check and make sure that the background intelligent transfer service is running on the computer.

  (a) click on start toreduce this includes this image, type services.msc in the Search box type services.msc in the dialog box

  (b) right click on the background intelligent transfer service, and then click Properties.

  Ensure that the service status is started and the type of service is automatic.

  Errors download Media Center and guide the suggested corrections

  http://blogs.msdn.com/b/astebner/Archive/2005/11/08/490466.aspx

  Sometimes, Windows Media Center would not be able to download Guide data. In general, this happens for the following reasons:

  (a) your computer is not connected to the Internet or there is a problem with your Internet settings.

  (b) If your computer connects to the Internet by using a dial-up connection, make sure that the connection is properly configured. For more information about setting up a dial-up connection for use in Windows Media Center, see solving problems with an Internet connection.

  (c) the Guide Server is not available or is temporarily out of service. If the Guide Setup was already complete, Windows Media Center will try to download it again daily.

  (d) the Guide service provider didn't Guide your location information.

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• Win 7 Media center must rebuild the library whenever he starts.

  I have a frustrating problem with Media Center in Windows 7.  He is a dedicated Media PC that is used primarily for music.  Whenever I have run media center and select the music option, remember all the information of the library for each category.  Since it loads in album it takes 5 to 10 min. to get information (albums, works of art, etc.). Then when I go to the Genre, he goes through the same process.  This is repeated whenever I select a new category.

  As long as the PC is on and information process was done once for each category, it works better.  Once the PC is turned off and restarted it must go through this process again.

  I used Media Center in XP for years and once he has sought and collected built the library is easy to use.  When the PC is started again click MC select music and all loads of information in a few seconds.  It seems that MC in win 7 is a step backward, unless there is something I am doing wrong.

  I downloaded the drivers for my sound card. display and motherboard.  All files are stored on the PC.  I had the problem on three separate PCs.  Although two of them, I went back to XP.  Before going back on the third, I want to see if there is something I can do wrong.

  I suggest that you try to reset the media library of WMP. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists. Tim Baets
  http://www.BM-productions.TK

• Netflix on media center crashes with the message 'checking activation of the device.

  Netflix on media center

  Netflix on media center crashes with the message 'checking activation of the device?

  Hello

  Try to disable the security software temporarily to see if that makes a difference.

  Note: Make sure to enable the antivirus on IT to make sure that your computer is protected

  For more information, you can also publish your quries Netflix community forums: http://community.netflix.com/forum or the Greenbutton

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't see Internet TV option in Windows Media Center. I tried mcupdate but in vain.

  I can't see Internet TV option in Windows Media Center. I tried mcupdate but in vain.

  http://digitalmediaphile.com/index.php/2011/01/31/how-to-fix-missing-Netflix-and-Internet-TV-on-WMC/

  Does that help?

• Units (Windows 7) media center impossible compleate the next option every time that I "click" or choose it from the menu option within the center of Meduia

  Whenever I "click" or choose it from the options menu in the center of Meduia units (Windows 7) media center impossible compleate the next option.

  Whenever I select the option, "more", all I get is a splashbox that says simply, "" INVALID APPLICATION, cannot start. "" This option is located in the general Menu of the Media Center in the submenu 'tasks' .

  Thank you...

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Media Center plays an ATSC channel very well, but then loses the TV signal when I try to record

  This only happens on two channels, others record very well (I pick up 16 live channels).  As mentioned in the title, Médiathèque, them play very well.

  Another piece of the info-Media Center did not detect these two channels during the installation.  I had to go to tasks to rescan for channels to be able to play live.

  Any help on this?

  Thank you

  Go to settings-guide-add missing channels. Type in right channel # (like 8.1). Then put in the right frequency for the over-the-air station (35 in my case). You can find this info here (http://www.antennaweb.org/aw/welcome.aspx) if necessary. Now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists. Change the source from the list to the channel that you have problems with. Next pass parameter-signal digital tv signal strength and a Coachman television that did not properly record to remove the Guide channel. This will fix your problem.

• Television channels in Media Center double in the guide

  This seems to be a common problem but I and many others don't seem to have a solution.

  I disable duplicate them the layers that do not work but a day or two later, they come back.

  I am in England and I put the post code of the transmitter that I am supposed to receive my tv. I have erased the Max and reread my tuner. Which none cure the problem.

  There should be a code added to the media center, which will focus on the channel list and remove those who do not have any signal. This isn't a real solution as some duplicate channels do not work. So what code that remembers what channels you have disabled?

  What else can I do to fix this? I'm getting really cheesed to disable 50 channels every day.

  Sorry if I have posted in the wrong place, it can't see a Media Center option to publish under.

  Cheers for any help guys

  Edit: My tuner is a nanoStickT2 of pctv. 290th PCTV model

  just saw this and this solution works rather than download a file:

  Duplicate with no signal channels come from adjacent areas. In the guide, do a right-click and disable unwanted channels. Once you have put WMC in place as you like it, you can stop retunes go in the (type regedit in the search box) registry editor and find the entry

  hkey_local_machine\Software\Microsoft\Windows\CurrentVersion\Media Center\Service\BackgroundScanner

  and setting

  Dword PeriodicScanIntervalSeconds = 7FFFFFFF
  Dword PeriodicScanEnabled = 0

  you will need to add a new DWord for the Periodicscanenabled DWord value

• Windows Homer Server Media Center not showing the new files I downloaded

  So I installed WHS2011 and thought that the library would easily work. It seems that the new files I put on the server are not get updated when I try and view them through the Media Center. Also when I serach for libraries on another device, it shows me two homeservers, one who say no files present and the other who has files (but does not update the index!). What is going on? (the file types are the same as the other files that are appearing fine)

  It is a basic installation, the only change I made is to move the directory to a new hard drive and update the WHS settings to point to the serverfolder updated on the new hard drive.

  I checked the settings on the media section of sharing control panel and it's on, I also checked on the dashboard and the media of Stentor is enabled.

  Why are my new files not updated in the index?

  Why two media servers on my other devices?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the forum Server TechNet for better assistance.

  http://social.Microsoft.com/forums/is/whs2011/threads

  Thank you.

• In Windows Media Center, I find the names of file for photos but no pictures. I can find them in "my pictures".

  It seems other files more bleeding in the 'My pictures' folder but the pictures are not appearing in Media Center.  If I go to the start menu and click on 'Images' I'm in the photos, but still, there are many files that do not belong.  If I go directly to the "my pictures" folder everything is fine.  What did I do to cause this?  How can I solve this problem?

  Hello

  Restore to factory conditions would certainly solve the problem - there is no reason you should have to reset the bios to be able to do.

  To consider is to force Windows to re - build the library - getails of the procedure are described in method 1 below.  You must view the files system and records that you were before being able to locate these files.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/media-library-is-corrupted-on-Windows-7/2afcac17-984b-48fe-98FA-451aa5c085e6

  Kind regards

  DP - K