Media Center plays an ATSC channel very well, but then loses the TV signal when I try to record

This only happens on two channels, others record very well (I pick up 16 live channels).  As mentioned in the title, Médiathèque, them play very well.

Another piece of the info-Media Center did not detect these two channels during the installation.  I had to go to tasks to rescan for channels to be able to play live.

Any help on this?

Thank you

Go to settings-guide-add missing channels. Type in right channel # (like 8.1). Then put in the right frequency for the over-the-air station (35 in my case). You can find this info here (http://www.antennaweb.org/aw/welcome.aspx) if necessary. Now, you will have 2 channels in guide for 8.1 lists. Right-click on the new guide that lists you just create and go change the channel-edit lists. Change the source from the list to the channel that you have problems with. Next pass parameter-signal digital tv signal strength and a Coachman television that did not properly record to remove the Guide channel. This will fix your problem.

Tags: Windows

Similar Questions

  • When I send a picture to Lightroom Develop module, image Navigator shows very well, but not not the image complete.  All I get is a blue background, where the image should be. What is happening with this?  I just installed Lightroom and Photoshop CC on a

    I used Photoshop and Lightroom for years and upgraded to CC about 6 months ago.  I just got a new computer and downloaded Lightroom and Photoshop CC on the new machine.  In Lightroom, when I send a picture to the develop module, all I get is a blue screen, where the image should be.  The navigation signs and develop panels show very well, but the image does not appear on the main screen.  It appears in the browser.  What's up with that?

    Disable the CPU graph use in the performance of the LR preferences tab. Blue box will be gone, Image will show.

  • Windows Mobile Device Center works very well, but then all of a sudden will not get connected mobile, it remains disconnected even if the PC sounds when the phone is attached to the USB.

    Windows Mobile Device Center installed. If I reboot computer everything works fine and he

    might work for 1 hour or 1 day, I can connect and disconnect the phone and it appears every time,.

    but then sudeenly it stops working.

    When I attach the USB of the computer phone rings (because it connects), but then nothing happens

    in Windows Mobile Device Center, the phone remains disconnected in Windows Mobile Device

    Center. It's really enoying!

    Any suggestions on how to debug/fix?

    Work around: someone knows how to restart the Windows Mobile Device Center without rebooting

    computer?

    I already tried to reinstall Windows Mobile Device Center, did not help. Both CD

    comes with the phone and software downloaded from Microsoft.

    I'm really stuck!

    Help, please!

    / Marcus

    It's a Samsung Omnia II GT-I8000

  • Connection Wi - Fi works very well, sometimes, then get the error 12007 farm in unexpected ways.

    works fine sometimes then leaves get error 12007 ?

    Hello

    -Did you change on your computer before the show?

    Follow these steps and check if they help.

    Step 1:

    I suggest you to update your wireless network card drivers and check if that helps.

    How to manage devices in Windows XP

    Step 2:

    Follow these steps and check:

    a. Click Start, click Run, type 'cmd', go to the command prompt and type in: "ipconfig/flushdns".
    (b) and then click OK.
    c. then type ' ipconfig / renew ' and press Ok.
    d. then type "netsh int ip reset resetlog.txt" and click Ok.
    e. restart your system and check.

  • Why Windows seems to work very well, but Windows Media Center not?

    Hello

    Today, I was with my Home Theater PC (HTPC) to record TV. Everything worked well. I wanted to watch a YouTube video when I was recording was completed. When I went on YouTube, there was no audio data.

    I use a HDMI from the HTPC to connect to my Pioneer VSX-50. While watching the TV show, the VSX-50 would show he was getting audio to 5.1 channels as it should. When I go on YouTube, all the sound elements would not pass, no audio signal is sent to the VSX-50.

    So I had a slight problem when it seems that Windows and Windows Media Center try to run the sound completely different from each other. And I went to my "manage Audio Devices" set up so that Windows would go the 5.1 audio channels (I think that until then he was established as stereo?). Once I did, I was able to get a YouTube sound very well. Then I went back to Windows Media Center. Media Center at the start, that's fine, but when I try to watch live TV or any recording, sound glitches (she repeats a second 1 loop repeatedly while video continues to play as if it's good), then he falls all together. After the sound glitch, my VSX-50 shows no audio signal is sent to the receiver, and I can't he come back! It really frustrates me!

    Any ideas?
    -Andrew

    Hi André,.

    Visit this link, it worked for me.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  • Win7 Ultimate Media Center Edition. Two channels ATSC displays only when I hit 'Record', otherwise 'channel not found', full strength 5 bar

    In the Seattle area, when I tune the channel 7.1 and 7.2 in the settings of signal strength, I still see 5 bars. It's the local affiliate CBS, KIRO.

    I have a HVR2250 dual tuner PCIe Hauppauge tuner card which has worked flawlessly for about a year. The drivers are current, 8851 dated June 2013. He also runs the current WinTV7 version 2. 8A. I do not use the Hauppauge app generally and it's not usually loaded with the exception of the tests. There is no shows at the request of record with WinTV7, although I could test records programmed successfully using this application.

    When I adjust the Guide, or by browsing the channels, MCE says no signal received 7.1 and 7.2.

    When I adjust everything first to one of them in the 10-15 seconds avant-erreur MCE 'no signal', if I reached the record, the channel is immediately blocked, including digital video and audio Dolby, and the program starts recording. I can stop recording, and as long as I don't change away from this channel, it remains fully functional with clear reception.

    I'm on a hill and have the correct line of the broadcasting antenna site about 12 miles away. I can also have this channel without problem on WinTV7 app by Hauppage, and setting my Samsung tuner screen, indicate both maximum resistance.

    The biggest problem is that the series on the logging sometimes channel show "available channel", and does not record successfully. If I manually start recording, it works every time.

    Is there any settings I can adjust to decrease the sensitivity required in MCE?

    Hi Scott,.

    According to the above mentioned the question on the Media Center, I have some suggestions for you so that you can go ahead and try see if this can help you.

    Method 1:

    Try the steps as indicated by "Cliffskier", who responded on 24 September 2012 in this thread:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Centre-unable-to-to-watch-live-TV-but-can/3f093264-A811-4106-81d6-75e6434c1aad?page=2

    Method 2:

    Try us to update or download the list of guide for the media center. While we ensure that we have the list of guide updates and channels. After completing the above step, then try to search for and implemented.
    http://Windows.Microsoft.com/en-us/Windows7/use-the-guide-in-Windows-Media-Center

    For more information:
    http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center
    http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions
    http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

    Hope this solves the problem. If the problem persists, you can write back to us information and we will be happy to help you further.
    Thank you.

  • DVD autorun.exe opens main html.menu very well, but when click on hyperlink in the menu it opens the new tab, but does not play a video, but the video html works directely

    Autorun.exe DVD opens with main menu.html. then when I click 1. HTML which is ment to start (from the main menu.html) only to open a white page only and plays not the file using src = flvplayer.swf player flash video. (it works on all other browsers) fine. Installed the flash plugin but still does not not in Fire fox. But when I navigate to the root of the cd and click 1. HTML it opens and plays very well, but do does not form the main menu.html. any help would be grat

    Thank you

    In your main.html:

    • What is the URL in the address bar?
    • What is the URL of the link?
  • Windows Media Center plays soundtrac film but not the video.

    My Windows XP Media Center plays the soundtrac of movies but not the video.

    The display shows the similar factals when music is played.

    Latest WMC has been installed

    Any ideas?

    Hello

    1. do you know the file type you are trying to play?

    2. this happens with all DVDs you play?

    3. do you get an error message?

    Step 1: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.

    Codecs: Frequently asked questions

    Step 2: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.

    Install Windows updates

    Step 3: Adjust graphics hardware acceleration. To do this, follow these steps:

    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

    b. click on advanced settings.

    c. click the Troubleshooting tab, and then click on change settings.

    d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).

    e. click OK, and then click Restart now.

    I hope this helps!

  • Windows 7 Media Center plays audio from VOB, no video. However, the VOB files play fine in Windows Media Player 7. What gives?

    I have VOB files in a VIDEO_TS folder.  Windows 7 Media Center will generate a thumbnail for them, but when I play them I'm audio but not video.  However, when I play in Windows Media Player will play without any problem.  Can someone help me solve this problem?

    Hello Pinkled,

    Just got out how we can get video of .vob files play correctly:

    It's pretty simple, just add the folder to the library of MOVIES instead of VIDEOS. It is true that videos, just listen to the audio, but no video appears during playback.
    Once you add to the movie library, W7 Media Center it will read "like a DVD" then you will also be able to navigate through menus.

    Hope that works for you also.

    Kind regards

    Miguel.

  • My wrt400n worked very well, but since those days, as the internet continues to drop.

    My wrt400n worked very well, but since those days, as the internet continues to drop. My modem is all good and up and running. Its router just guard fall internet. SO I reset the router and thn it works. Pls suggest a soltuion. Its very frustrating and fiddles with the work.

    THX in advance

    How about if you change the settings of the router wireless. Change the width of the channel at 20 Mhz and select 9 as the standard channel under the 2.4 Ghz settings. For 2.4 GHz wireless security settings, you must set the security settings wireless personal WPA2 and AES as the encryption. BTW, you have problems in your laptop only, or with computers portable mutiple because if you don't have a laptop then you must try to update drivers wireless card from your cell phone.

  • Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

    after update to XP media center units Vista remote control

    Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

    Hi Nicolas,

    I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

    For more information, you can check the link below,

    http://www.PackardBell.com/index.html

  • Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

    It's VERY odd and very annoying!

    I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

    So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

    However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

    He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

    I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

    She continues to keep trying to connect then repeatedly fails.

    If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

    I can't really understand what is happening here... any help would be appreciated.

    Hello

    Refer the article that could help you solve this problem.
    http://support.Microsoft.com/kb/932163

  • I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?

    I have a model of the Apple TV A1625 and a Logitech bluetooth kb k811.  It works very well, but how do I use to turn the Apple TV?  Which button or buttons use?

    Is not possible. You'll need to use the Apple TV remote to turn it off.

  • I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

    I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

    You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

    You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

    Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

    Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

  • HP 4620: HP 4620 scans very well, but could not save the analysis in a file

    The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

    Hey @motikama,

    Welcome to the Forums of HP Support!

    I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Uninstall all software associated with the printer to your computer.
    2. Restart your PC.
    3. Download and install the latest drivers by clicking on this link.

    Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

Maybe you are looking for

  • Downloading from the Internet - unknown Publisher error message

    HelloI have problems when I download from the internet, I get an unknown Publisher saying the error message windows, my internet pages show also error on the page, a part of the page is missing or it's full of garbage. This happens only for the last

  • Emails from Facebook cause my Outlook Express to freeze

    I use Outlook Express v6.  When I received a notification e-mail from Facebook, Outlook Express hangs and I have to close the program.  Sometimes I have to close it in the Task Manager, because the output will not work.

  • PIX TTL values decreasing

    This of course sounds abnormal. External interface of ping PIX, $ ping 195.x.x.x PING 195.x.x.x (195.x.x.x): 56 bytes 64 bytes from 195.x.x.x: icmp_seq = 0 ttl = 246 time = 7,393 ms However, if I ping a box in the DMZ, things seem a little weird. $ p

  • How tweak you to adjust noise reduction in lightroom for mobile?

    Currently, it provides only low/medium/high, but a minimum of 25 is VERY aggressive. I find that I rarely need anything beyond 10 to 25 or the images gets too much "trouble". Why not just provide the same volume as in the desktop version (like almost

  • Update ESXi 5.1 to 5.5 - should I use ISO custom?

    HelloWe use the DELL and HP servers running vSphere.When we are improving to 5.1 to 5.5 ESXi ESXi, can we download the ISO from VMware image and use the Update Manager to upgrade OR it is advisable to download the ISO image customized DELL and HP to