Media Center Video card not detected error

Similar Questions

• E9150T - Windows 7 Media Center - IR hardware not detected

  Hello.  I finished the upgrade from Vista to Windows 7 earlier today.

  While the upgrade went OK, Media Center can't access hardware IR for a reason any.

  I always get the IR hardware not detected error message.

  I do not anything with the prior agreement of material or after the upgrade.

  I'm running on an E9150T and I think IR's eHome Infrared Receiver via USB.

  Any help is appreciated as I did not find anything Googling for the last two hours.

  PDXPat

  Problem seems to be resolved.  Do not know which of the following has solved, but I made the following two tasks:

  1. connect a second infrared device on the second port of the IR Blaster.  Previously, it was empty.  Alone, this does not solve the problem.

  2. the system to reboot.

  3 went through a detailed set / Media Center, and simple configuration.

  Alto!  The IR Blaster seems to work now...

  PDXPat

• Windows Media Center TV tuner not detected

  My current operating system is Windows Vista Home Premium Service Pack 2
  (I installed SP2 from microsoft.com)
  I have the Version of the Windows Media Center - Windows Vista 6.0.6002.18030 software (vistasp2_gdr.090429 - 2357).  I'm trying to watch TV on my laptop.  I have Windows Media Center and am confused about the version because I saw this - if the version number is 6.0.6001.18000, you are NOT running Windows Media Center TV Pack.  You are running the version of Windows Media Center, which is included in Windows Vista or in Windows Vista SP1.
   
  As you can see my version (numbers) are alittle different on the end, also the info in parentheses (vistasp2_gdr.090429 - 2357) I don't know what that means.  When I tried to configure the tv signal in Windows Media Center, I was told: the TV signal cannot be configured because no tv tuner hardware was detected. So, how can I find out if there is an internal tv tuner installed and everything is not detected?  My laptop is new - 3 weeks, and I think that all the drivers are current.   While they inspected the help windows vista hardware compatibility list for 64-bit vista tv tuners, I was flooded for more information that I knew what to do with.  I'm obviously not a computer genius and will never be.  I'm open to suggestions.  I just need to know what I have to do to be able to watch TV on my laptop.  Any help will be appreciated! Thank you.

  Hello

  Thanks for choosing Windows Vista Forums.

  I recommend you contact the manufacturer of your computer to check for the presence of a TV tuner.

  All Vista computers are delivered with the same version of Windows Media Center.

  Here is a link below for compatibility with Windows Vista Hardware.  Please let us know status.

  http://windowshelp.Microsoft.com/Windows/en-us/help/d7ef383d-3342-4C8B-b1ce-5ca64891bc381033.mspx

  How to use Windows Media Center on a Windows Vista-based computer to watch, pause and record live TV

  http://support.Microsoft.com/kb/942375

  Solve problems with watching TV on your computer

  http://windowshelp.Microsoft.com/Windows/en-us/help/d4dce2d3-0388-43b1-8880-7d6823d0eb9f1033.mspx

  Please have a read of the article below:

  Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".

  http://support.Microsoft.com/kb/934531

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".

  http://support.Microsoft.com/kb/929453

  If you experience problems with your TV tuner card, I suggest you go to the Web site of the manufacturer for the software updates and technical support.
  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center IR hardware not detected

  Hi, I'm stuck at the 'IR Hardward not detected"when you try to set up the TV.

  I am in Australia and have a wireless component gets my digital signal in another room.  www.cocoonsystems.com.au I run a Haupaggue (spelling?) TV tuner.  The TV tuner may display the signal from my cocoon via its product called WinTV.  It is consulted on the Composite connection.  (PC is a new computer from Dell with Vista desktop loaded)

  So, when I go to configure Media Center to see the signal as I do the following:
  1. set up TV signals
  2. Australia region
  3. choose antenna
  4. Select digital terrestrial
  5. Select Yes (for the view through a decoder, because the other option does not find my signal)
  6. He found the photo and playback of the sound by means of Composite 1, so I select it
  7 IR hardware not detected.

  Media Center doesn't let me step by-pass 7 if I don't have an infrared connection.  I have no need of my PC to change the channel because I use the remote control digital TV to change the channel through the Cocoon system.

  Is there a way someone knows I can work around that this troublesome matter of IR hardware not detected?  I can only assume if I had my video camera connected through the Composite connection I would have the same problem too, because that was not a remote control.

  What can I do?

  Balibooblue,
  Thank you for visiting the Microsoft Answers community forum.

  The only way I know to bypass the need for a hardware device to IR during the installation of Media Center to watch TV is to use a "virtual" infrared device  There is one called "Vista MCE IR Blaster" is a file that you download from the Internet that simulates an infrared device.  You will need to do a search for it.  Or you can buy the hardware Media Center application relatively cheaply online, on the USD $20.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  Let us know if this information was useful or if you need additional assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP, video card not detected

  I have an old HP Pavilion with an integrated GPU. I installed XP and was able to install a missing audio driver. However, the system is still missing the SM Bus controller.  I installed the software of my new GPU on a disc and I changed the default on the BIOS to the PCI-E. I have physically installed a Radeon HD 5450 GPU, but the system does not detect. Can you help me?

  HP Pavilion 061 EV935AA-ABX a1420.fi

  Mother-Amethyst-M version 1.0 card

  North Bridge: ATI Xpress 200

  South Bridge: ATI SB 400

  CPU: AMD Sempron 3200 + socket 939, 3 Ghz

  2 GB installed memory

  Hi fabiolivorno,

  Welcome to the Microsoft community. According to the description of the problem, your video card is not getting detected.

  It looks like a hardware problem, I suggest you contact HP support for better support. You can also contact the local Tech store for that matter.

  Missing SM Bus controller problem, it appears that if the chipset drivers are slow to be installed. I suggest to find the chipset on the CD drivers and install them.

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows media center ir hardware not detected units

  Hi all

  It's my whole first time attempt to install a tv tuner and set up and I have difficulties. I try configuring a hauppauge hvr 1850 in windows media center on windows 7 64 bit. My TV provider is directv and windows media center detects my decoder when it searches for tv signals. It does not detect my tv tunter as well, but he says no signal and I have to configure manually. After you manually configure my tv tuner, I get another message saying "ir hardware not found." I tried a lot of workarounds and none of them does not seem to work, I have a windows media center certified remote provided with my tv tuner and I can control everything in windows media center, but it stops said ir hardware not detected. I need help serious because I am running out of options. Does anyone use directv on this particular tv tuner?

  Have you downloaded Windows Media Center remote control receiver/blaster configuration utility?

  Go through the procedure step by step, as described in the following article: -.

  Windows Media Center double Tuner and decoder Setup

  (in your case STB single)

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• ASUS VS247H 23.6 "LED LCD, is detected by the generic devices such as 'PNP monitor' Manager My video card is detected correctly. Win 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers

  This monitor works fine but is detected by the generic as 'PNP monitor' Device Manager. My video card is detected correctly. I am running Windows 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers. I checked the Asus support and they do not have a monitor driver.

  Any comments would be appreciated.

  Roger,

  I'm glad to hear that.

  Just to let you know, it is often the case with the monitors.

  They will be the "default"setting, but still have the correct driver.

  Happy computing,

  B Eddie

• Windows 8 Media Center video & music files on my laptop has been corrupt.

  Windows 8 Media Center video & music on my laptop has been corrupted. Play the video but without any noise.

  All the audio controls are set to maximum volume I discover on the sound settings of Realtek video & its drive of the laptop. The following message shows on the properties of Audio Realtek High definition that thedevice working properly«»

  Please someone help to specific steps to follow to fix my media library without spending money.

  I am a retiree and would really appreciate help online to fix my media library.

  Thanks for the help, Chris

  Hello

  Thanks for posting your query to the Microsoft forum.

  I appreciate your efforts to try to solve the problem and I will definitely help you with this.

  You have sounds in Windows?

  I understand that you have tried all the troubleshooting steps, to repair Windows Media player, you can follow the methods below:

  Method 1: Run Windows media player convenience store settings and check.

  a. press the windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select display all on the upper left corner.

  d. run Windows media player settings troubleshooter.

  Method 2: Uninstall and reinstall Windows media player.

  I suggest trying the deactivation and activation windows media player by following the steps below and check if it solves the problem.

  1. press Windows key + R to open the run command.

  2 type appwiz.cpl , and then press enter to open programs and features.

  3. click on "turn on or off windows features".

  4. uncheck the 'multimedia' and click ok.
  5. restart the computer when you are prompted.

  6. repeat step 1-3 and check the "multimedia functions".

  7. click on Ok.

  I suggest also refer to the link below for more information on the types of media files that supports Windows Media Player.

  Types of files supported by Windows Media Player

  If you do not have Windows sound, please visit the link below:

  Method 3: Follow the steps in the link given below

  No sound in Windows

  Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• Windows Media Center visualizations will not work

  My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
  When I listen to music and want to see my office shows that the program is still underway
  I thought it has something to do with the visualizations I instaled on Windows Media player
  (like ribbons and Upcube)
  I tried to remove them, they either come back or he will constantly ask me to go to it

  my system is portable

  • Windows Vista Edition home premium
    • Intel core 2 DUO

    32-bit operating system
    2.00 GB

  I missed a CD command before the directory (since corrected) so orders would be as follows:

  CD C:\program files\windows media player\visualizations\
  
  DIR

  You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

  regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

  repeat if necessary.

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• NETWORK card not detected after installing ESXi 4.1?

  Hi all

  I installed the ESXi Server 4.1 on a single server with the following configurations,

  CPU = Intel (R) CPU Xeon X 3430 @ 2.40 GHz

  Memory = 16GB

  NIC = Intel 82574 L Gigabit Network connection-2 no

  After that ESXi installation a NIC card not detected. But two cards network is the same configuration. Due to this problem, I can not configure grouping of NETWORK cards. Please suggest me. Thanks in advance.

  Hello!

  On the screenshot that you are using a motherboard Intel S3420GP. Just a NETWORK card is 82574L, the other on board is a 82578DM, which is not supported. So you will need additional network cards.

  See you soon,.

  Martin

• "IR hardware not detected" error when you try to configure the TV signal in Windows XP Media Center 2005 with Service Pack 3

  I have an HP dv6000t. He came with Yuan EC680 ExpressCard analog TV
  Tuner. When I upgraded to Vista, the IR receiver seemed to be detected,
  but after downgrading to XP MCE 2005. XP MCE 2005 was the ORIGINAL OS
  on the system (bought in November 2006). I've updated the drivers for the TWO
  the tuner card AND who do not HAVE the nVidia GeForce Go 7400 video card
  address this problem. Any suggestion on how to solve this problem would be greatly
  appreciated. What HP had try me, including Sofpaq fixes are not
  address my problem. It does not give the error "IR hardware not detected".
  overnight, it correctly detects the signal from my digital cable box.
  The main problem could partly be the we FINALLY converted to digital television
  signal and I always try to use the analog tuner ExpressCard? Once again
  any help is greatly appreciated.

  I found this fix on another site.  We're supposed to plug the IR cable to the TV box at the back of the first port on the remote sensor Windows Media (the ' antenna' of the Windows Media Center remote control) and then to put the tip of the probe of the IR cable to the cable TV box distance near the sensor on the cable box (it can be seen by a light in the glass) and then complete the configuration of the channels in Windows Media.  The problem is, it does not work unless there is also something connected to Port 2 of the medial distance sensor Windows as well (a head set will do).  With the sensor box IR cable company cable plugged into the first port in the back of the remote Windows Media sensor and headphones plugged into Port 2 of the remote sensor, Windows Media, and the end of the probe of the sensor cable box IR cable near the cable box remote sensor box, Window Media channel setup "found" the cable of the IR sensor and allow me to complete the installation.  I could not bind the Windows Media remote sensor with the remote for the cable box, but said that I managed.  I use the remote cable box to change channels and have box IR cable connected on the decoder cable TV and put the cable box IR receiver cable on top of my desk.

• Media Center video error Qosmio G20

  Hi, I am unable to watch TV via Media Center. In the first when asking to watch live TV, I get ERROR VIDEO coming in the display window. I also get an error message stating: not found Tuner, the tuner is defective or not installed. Make sure that the tuner hardware and a valid tuner hardware driver is installed. I'm under V5.1.2715.2941 of MCE 2005 update rollup 2. As far as I know tuner and driver are installed and OK. Would appreciate any help you can offer. Thank you very much

  Post edited by: [email protected]_UK

  Hello

  I put t know if you have the video error or decoder, but please check this document http://support.toshiba-tro.de/kb0/TSB59015P0006R01.htm

  Maybe this will help.

  Good bye

• Revo RL70 Media Center Tuner card detection problem

  Brand new RL70, Win7, AVerMedia A373 minicards Dual DVB - T seems to be installed correctly, indicated in the device with the latest drivers Manager. When you configure the TV Signal in Media Center, no signal TV or channels are. Manual setting indicates tuners exist, but no TV signal. Detecting TV signals takes more than an hour, as channel scan.

  Am using the existing TV equipment (antenna, cable, etc.) which is proven to work.  Any ideas?

  As I was at a loss, and a solution was not forthcoming, in desperation a tried upgrading to Windows 8.  Success!

  I assume that the installation of Windows 8 and Windows Media Center has replaced an original image from Windows "corrupt."

  So not really a solution, but problem solved.  Only problem is now the remote does not work with widows 8!  I see another thread on this point, so a common problem.