Media Center will not recognize the internal TV tuner from Sony

Similar Questions

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows 7 Media Center will not download the new guide listings

  Hello

  I am really frustrated. WMC will not download the new guide listings and I tried all the patches that are supposed to be that I found in this forum. I also tried the system restore, which did not fix the problem. Obviously the problem is not affected by the restore program.

  I was able to determine that there is some kind of corruption of the WMC files that Windows 7 can not solve (according to the event log).

  I'm a bit exasperated at the tenacity of this problem. Y at - it a reliable fix or I need to reinstall Windows 7?

  Thank you

  Hello Long777,

  You have the update for Windows Media Center installed?

  Click on the article below:
  KB Article ID: 2284742 -October 2010 Cumulative Update for Windows Media Center in Windows 7

  You may be able to force a manual update. Do an update (weekly) to TV Guide through the menu system.

  If this does not help, you might want to ask your specific question to http://.www.thegreenbutton.com \forums

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center will not recognize TV tuner Digital stations live

  I am trying to display and record all my content from TV on my laptop using my hybrid analog/digital TV tuner card. So far, the WMC recognizes the analog content. But my cable provider provides many channels of ClearQAM I can see on my TV without a decoder, just using the QAM tuner in the TV. My tuner card is supposed to recognize the QAM signals, so I should be able to view all unencrypted content (users) that comes through the coaxial feeder on my portable tuner. But no luck so far. When I set up the TV signal in WMC, the menu only listed setup analog cable my cable box, even though I know that my cable company provides digital content.
  I had actually upgraded my Windows Media Center to include the TV pack (downloaded from Engadget) but even this last version does not recognize digital channels. If I try to change the Program Guide and add them manually, all I get is static when I select the. I am at a loss to know what to do next. Is this a problem that should fix a new TV tuner? I heard good things about the AverMedia card, maybe I should just go that route? Can anyone recommend a new tuner card?

  Hey,.

  See this link:

  http://mymce.WordPress.com/2008/11/01/Vista-Certified-logo-TV-tuner-cards-vs-Vista-MCE-ready-TV-tuner-cards/

  This has all of the compatible TV tuner cards.

  See you soon.

• Media Player or Media Center will not recognize DVDs, but will play CD

  I've had my laptop for about a year now. The media play would play a DVD without problem. Up to what a month ago I noticed that it would take more time and more time for the Media Player play a DVD. I can't have the media to listen to anything except a CD. I noticed a rattling when I inserted the DVD. Now he not only recognise a DVD, but when I insert a DVD, nothing will happen. I tried uninstalling the driver rest nothing is that nothing happens. Do I have to replace the whole player. In Media Center, it lists a DVD as being stored in the library, I the HELP JUST DO NOT KNOW WHAT THE DEVIL IS VA ON?

  ONE WITH A SOLUTION? NEED HELP.

  Hi Roy,

  Welcome to the Microsoft community.

  Apology for a late reply.

  I suggest you TURN the Windows media feature in the list of Windows features in Control Panel. Check the results. Check out the link and follow the steps to do this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-cannot-detect-DVD-error/6246f256-A272-4450-8F3C-344631773cac

  Please let us know the results.

• XP Media Center does not recognize the atsc tuner

  Comes with a mistake to try to at least one device with ntsc tuner.  I have an atsc/qam tuner.

  Operating system		System model
  Windows XP Media Center Edition Service Pack 3 (build 2600) Install language: English (United States) Local system: English (United States)		Dell Dimension E521 Inc. System Service tag: 1K6C6C1 (support for this PC) Chassis serial number: 1K6C6C1 Case type: Desktop
  Processor		Main circuit
  2.00 GHz Dual Core AMD Athlon 64 X 2 hides the central memory of 128 kilobytes 1024 kilobyte secondary memory cache 64-bit ready Multi-core (2 total) Not hyper-thread		Board: Dell Inc. 0CT A03 103 Serial number:... CN708216AQF10C. The bus clock: 1000 MHz BIOS: Dell Inc. 1.1.4 12/09/2006
  Readers		Memory modules
  349.53 GB drive hard usable capacity 292,35 gigabytes of free disk space HL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner] TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner] WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy		3072 MB usable memory installed Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1) Slot machine 'DIMM_3' has 1024 MB (serial number E823981D) Slot machine 'DIMM_2' has 512 MB (serial number F802488F) Slot 'DIMM_1' has 512 MB (serial number F802485E)

  Hello

  1. What is the brand and the model number of your TV tuner card?
  2. is it compatible with Windows XP Media Center? She never worked properly on your computer?

  Method 1.
  First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.

  Method 2.
  Also, check out the methods listed in the articles below and check.
  You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/891108

  Update 1 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/873369

  I hope this helps.

• Media center does not recognize the unencrypted HD channels

  I'm trying to record live TV of TV that gets its strings by simply using the power (without decoder) coaxial cable. When I set up WMC, choosing the selection of regular (analog) cable packages it offers, I get all my channels except 5 or 6 unencrypted HD channels that offers my firmware. What are the channels that appear on my TV as fractional as channels 116.2, 117.2, etc.. I really want to record these HD channels. Is it possible to add them manually to the WMC?

  Hello MtnGoat,

  Thank you for visiting the Microsoft Answers site.

  You can check that the card TV tuner and model is a compatible TV tuner of QAM.

  In addition, you can check if you are able to view the unencrypted channels when the cable is connected directly to the TV.

  Here is a useful link which includes information on taken TV signals supported by Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  For further assistance, you can also post the question to the following Microsoft Web http://thegreenbutton.com/ Windows Media Center Community site.

  I hope this information is useful.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why vista Media Center does not recognize my card tuner Hauppauge 1850

  I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

  Hello

  I suggest that you install the latest driver and software from the Web site below and check if it works:

  http://www.Hauppauge.com/site/support/support_hvr1800.html

  Try to contact the hardware manufacturer for assistance.

  Hope this helps,

• Recovery media creator does not recognize the USB 32 GB on Satellite L750?

  I hope that there is someone here who can help you:

  My computer is a computer L750 x 64 based Satellite and the problem is that the sound disappears after a few seconds, when I hear the music from Youtube.

  I read in the preinstalled usermanual can I restore the computer pressing F8 when the computer starts, but it does not work.

  The continuous computer just on Windows 7.
  Now I want to restore the computer to the factory standard and will therefore use the Recovery Media Creator but it does not work.

  I want to save data on a 32 GB USB key, but it will not recognize the stick.
  I know that 32 GB is without error, because I can easily store / retrieve data either with FAT and NTFS systems.

  What I am doing wrong and is there anyone who has a good idea, so I can spend?
  best regards Erik

  Even if your USB is working correctly outside of the recovery media creator, this does not mean that it should be handled properly by this tool.

  I had problems creating recovery DVDs even though I was able to burn video files on the same disk.
  As far as I know you must take at least 16GB USB flash memory stick
  Usually, this should work.

  But I m wondering why you are not able to use HARD drive recovery option. Have you changed anything on the HARD drive?

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Fuze 4 GB will not recognize the change of information tracking

  Right then, I had some problems with my Fuze MP3 player. When I download the new music on the device, the ID3 tags all come out the way they are supposed to. However, if I remove the music that is on the drive and replace it with the same tracks with ID3s update, it will not recognize the change of title, album, or artist, if the song file will be updated. I know because I had problems with the songs with the same name or accidentally given songs the name of another song, which resulted in incorrectly labeled music.

  I tried to format the drive, I tried to remove the music manually in the file system, I tried to change the USB mode and delete the file that I said holds the ID3 data, and I tried all the possible permutations of disconnection and let the Player recognizes the changes. This includes the removal of all the music in the player, disconnection of the latter, confirming that there is no music on the system, to change the USB mode, deleting the file with the ID3 information, turning the rear USB mode, reconnect, put my music on the device, and the problems have not been resolved.

  It is likely, it is just to be fickety, and there is something I'm don't is not right, but it's the second "rocket" I've owned - I love the model and went up to return a Fuze + in favour of the former model - and one has never had this problem. I'm willing to try anything within reason to solve the problem, so I hope someone can point me in the right direction.

  In fact, the problem was not as expected at all. I think it turns the problem is Windows Media Player, which I only use to sync my music on my MP3 player, had a library with outdated information. So after the Player update multimedia, I refreshed my library recordings and everything worked as you wish. I just to make sure that if I make changes to existing songs in my library.

  Thanks for all the help, guys, guess it was on my end.

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• Try to burn a CD. The system will not recognize the blank disc or let me burn__

  Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

  Hello

  Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

  If no joy:

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile