Media player playback sonido

Similar Questions

• Windows Media Player playback

  Hello world
  I'm having a problem with my Windows Media Player playback.
  Whenever I try to play an mp3 file or a video file it gives an error that I've shown in the screenshot.
  This error has offered the web assistance. I tried web help, but did not work out.i have also included this screenshot of the Web page.
  So I can't play anything in the Windows media player or VLC player. Something wrong with all the music files.
  My audio and peripheral driver update audio works.
  Please see the screenshots, you will all understand.
  Thank you.

  Guys, I would point out that when I reinstalled the driver the most recent site Web hp the problem persisted.
  But after all, I tried a same driver hd audio that I had in my computer backup software hp laptop hp itself already registered in my system when I bought it.
  When I installed this driver who gave in the backup of the drivers believe me the problem disappeared.
  Change I noticed is that in services (msconfig.exe) start a new option Realtek HD audio manager appeared so it is checked at startup at system startup in the functions of this excessive and good sound way service disappeared.
  This option appeared when I installed the latest driver on the hp site.
  So, really, thank you to all who helped me.
  Thank you.

• Windows Movie Maker, create empty audio files from Audio CD through Media Player playback.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  I am trying to integrate audio CD in Windows Movie Maker by using the Microphone of CD Audio in Windows Movie Maker game and reading the CD with Media Player file. The file is created very well with the small notes on the icon, but reading, there is no sound. I went into control panel - household and made sure that all the sound elements was not checked in as volume controls 'mute' and turned everything up to full. Playback of the audio in the player, once I hit 'record' in WMM and the operation starts. I hit stop when the desired recording is over... but the files play 'empty' back in WMM and Media Player. This procedure has worked well for me in the past, so it's very frustrating that it has suddenly stopped working.

  =================================
  As the Audio Input Source, try the stereo mix.

  Or... it may be worth trying to RIP the CD with .wma as the
  target format, then import the .wma file into Movie Maker.

  Songs of RIP (copy) of a CD on your computer
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/RIP.aspx

  Easy start for Windows Media Player 11 guide
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/EasyStart/mp11guide.aspx

  Windows Media Player 11 tutorial: how your Audio CD ripper
  http://MP3.about.com/od/WindowsMediaPlayer/SS/WMP_ripcd_tut.htm John Inzer - MS - MVP - digital media experience

• Windows Media Player playback speed problem - static...

  I play an MP3 to an audio book on WMP file and when I go on it 2 X normal playback speed, suddenly the sound produces a static noise. The audio is always readable, but static electricity is super annoying.

  Do you know what causes this and how to fix it?

  Thank you very much

  Thanks for the tips... I found actually an ideal solution that completely eliminated the problem...

  I previously converted the audio book in MP3 format, and as I said, I had that static when going above 2 X the playback speed.

  Well, what I did to solve the problem is the following:

  I used RealPlayer (which is a 100% free tool) to convert the MP3 to a Windows Media Audio file. Just click convert to button in RealPlayer and change the settings and press convert...

  AND'RE YOU READY TO GO...

  The audio is excellent... zero static... and now I can listen to the audio book of more than 2 X the normal speed in Windows Media Player and do with it in less time that I would otherwise...

  It's a beautiful thing!

  Wanted to leave instructions because other people have noticed that they have had this problem and I am sure that there will be more who need a solution in the future...

  Cool - let me know if you have any questions for those facing the same question...

• too bright Windows media player playback

  whenever I play a video through windows media player the screen is too bright and video enhancement settings do not respond. Help?

  I suspect it is Ati catalyst, one of the options in there. try to turn everything in the video tab of ATI catalyst off the coast. I hope this works. It worked for me

• Windows Media Player - playback speed issues

  When I open some files .mov with WMP 11, I can't set the playback speed.  Specially when I open the control of development for reading there is no cursor speed control.

  When I open some files .mov with WMP 11, I can't set the playback speed.  Specially when I open the control of development for reading there is no cursor speed control.

  The next section is a section of best for your question:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How can I keep the option of playback in Media Player speed?

  I just got a new computer with Windows 7 and I don't seem to be able to anchor the box in Media Player playback speed, as I used to. I can access under enhancments, but she disappears every time.

  Hello

   
  Did you changes to the parameters of the media player?
   
  Follow these methods mentioned below and check.
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  
   
  Method 2: If the method above does not resolve the problem, you can try to disable Windows Media player and then enable the feature that is as good as the uninstall and put it back. Follow the steps below to do the same.
   
  To enable or disable the Window Media Player, follow these steps:
  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. develop media features , uncheck the box next to the Media Player functionality to remove media player. Click OK and restart the computer.
  c. turn on the player again by selecting the check box next to the feature of Media Player.
   
  Access the link below for more information on the steps above to turn off or on the features of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
   
   
  Refer to this article: Change the speed of playback in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/change-playback-speed-in-Windows-Media-Player

• How can TV 31RL938 - I find installation key for PC-Windows Media Player

  To watch DVD from PC - Windows Media Center (Windows 8) on my TV (31RL938, without fire related to the internet), I have to do an Extender installation with the Media Center on my PC (the TV symbol is on my PC).
  That's why I have to put in an installation key (8 digits), which should be on my TV / Extender by choosing 'Windows Media Center' here.

  But how can I find it?

  Thanks for the help!

  Gerd

  Have you managed that?

  To my knowledge the two devices; your TV and your PC must be connected to the same network: in my case its home WLan.

  I don t use Media Center, but I made the connection with Windows Media Player.
  Using the Media Player I can listen to the video and music to my TV or stereo receiver...

  Microsoft provides the very nice HowTO on how to start with the streaming media:
  [Your media to devices and computers using Windows Media Player playback | http://windows.microsoft.com/en-US/windows7/Stream-your-media-to-devices-and-computers-using-Windows-Media-Player]

  and this one:
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

• My Media Player is running in slow motion, how do I speed it up?

  My Media Player is running in slow motion, how do I speed it up?

  See here: http://windows.microsoft.com/en-sg/windows/change-media-player-playback-speed#1TC=windows-7

• Problems with fluctuating volume of Windows Media Player

  After that I transferred MP3/WAV files to my old laptop which has Vista... for my new laptop which has Windows 7, my windows media player then started acting crazy during playback of music files.  The volume goes up and down, and during parties strong songs, it goes almost silent... with a few songs, it becomes just as hard very quickly and then just cut all together.  I tried tools audio fix from microsoft, and they were unable to help him.  Basically, it sounds like when you listen to music, and you would simply continue to cupping your ears again and again, as you can imagine is really annoying while you try to listen to music

  Try the following steps, presented by another poster, JoeyNice:

  6 steps that have helped me with this problem:

  (After looking at a few ideas from there I went and did my own investigation and arrested next steps the boring windows media player playback sound fluctuations)

  (1.) start the media player and go into menu improvements in media player andreset all default media player improvements and disable all improvements and equalizer, etc...

  (2.) do right click the speaker volume icon (located in the lower right corner of windows in the area of programs/notification bar) then andclick 'sounds' in the right click menu (or if "speaker" icon is not in the notification bar go to control panel and click on 'sounds')

  (3.) in the sounds of communications click menu tab and select 'status quo '.
  
  4.) , while on the sounds tab menu click play, and then click speakers allowing you to then click on properties
  
  5.) in the sounds-> speakers menu properties go to improvements and select 'Disable all sound effects'

  6.) while in the sounds-> speakers menu properties go to the Advanced tab and "restore default settings" , then click on apply and then OK and then apply and ok again and the sound menu

  These steps allowed me to be able to go to windows media player and listen to music with no fluctations (and you can now be able to turn on the equalizer again if you want to make adjustments, but if this causes the fluctuation back just turn Equalizer back off.) I could turn it back on after you follow the steps above with no fluctuation)

  Let us know if this suggestion helps with your problem of fluctuating volume.

  Sincerely,

  Marilyn

• Problem with Windows Media Player Audio sync DivX playback in full screen

  Hello

  I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

  I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

  Thanks in advance

  Jim

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

  While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

  in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

  BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

• ActiveX: Open a separate window of Windows Media Player 9 and control playback

  Hey all,.

  I'm trying to open a video in WMP4 automatically in Labview and control. There is an existing ActiveX container, but it remains on the front panel. I can control its playback, but can not pause and resume.

  I can also open the video in a window outside of LabView through Labview WMP9, but I was not able to control. Simply run it and then watch until it ends. It is the preferred operation, I need to understand.

  LabView version: 8.6

  ActiveX application: Windows Media Player 4

  OS: Windows XP

  My questions are:

  (a) how to pause and resume a video file, if you use the ActiveX with LabView container ensures

  (b) how could I access an instance outside WMP open through LabView playback controls (because I want to automate reading based on acquired signals)

  Note that the ActiveX refnum is WMP4 while the version on XP is WMP9.

  Thanks in advance for your help,

  Hasan

  I had trouble with your application. I don't know if it's
  my version of LabVIEW or something else. He will not play for me.

  I would like to direct you to the following thread:

  Windows Media Player ActiveX plays do not image, but the stand alone WMP application. Why?

  If all goes well
  This will help enough to do what you want. I was not able to get
  whether at work, but it seems that it is much discussed on the
  forums. Everyone has tried to do the same thing as you?

• Media Player error: IWindows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  I copied a dvd on a USB from a friend, I can see from memory stick, but when I tried to copy it to my computer and read it, it says that iwindows Media Player can't read the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. Can someone help me please?

  Thank you

  =========================================================
  Best bet would be to download and install the free software
  VLC media player... it should play the video without the
  you need to change the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.6 - win64.exe)

• Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  * Original title: wrong Region

  Windows Media Player will not play CD - advise

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

  Note I am eager to play a CD and it is recognizing a DVD?

  can anyone help

  Hello

  1. what version of Windows is installed on the computer?

  2. what version of Windows Media Player is installed on the computer?

  3. what region is your currently defined DVD player on?

  4. are you able to play other DVDs?

   

  Please follow the provided steps and update us with the results.

  Note: All the steps apply to Windows 7

  Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

  a. Click Start, click computer.
  b. right click on the DVD drive, and then click Properties.
  c. click on the Hardware tab, click the properties button and modify the DVD of the region.

   

  Method 2: Uninstall the DVD player and check.

  a. Click Start, type devmgmt.msc and press to enter.

  b. develop DVD players, right click on the sub element and click on uninstall.

  c. restart the computer and check the result.

  Once you restart the computer, the DVD driver will be loaded automatically.

  d. try to play the DVD and check the result.

   

  You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Let us know if it helps!

• settings in media player 11 work any playback speed

  I can't adjust the speed during playback of CD it is not even a slider that appears. I ran the automatic editing, still no luck

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you are unable to adjust the speed during playback of CD I will be happy to help you.

  1. what happens with all CD and all the files that you play?

  2. did you of recent changes to the computer?

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  

  Method 1: You can try the following steps and check if it helps.

  a. open Windows Media Player and select a song to play.

  b. Select now playing.

  c. right-click in the now playing window , and then select improvements.

  d. Select play speeds.

  
  

  Method 2: Refer to the following article.

  Change playback speed in Windows Media Player http://windows.microsoft.com/en-MY/windows-vista/Change-playback-speed-in-Windows-Media-Player
  Note: This article also applies to Windows XP.

  If you have additional problems, please reply to this post and we will be happy to help you further.