Media player will be no longer rip CDs to the library or read after the reinstallation of the Vista operating system

I don't know if it is the version 11 of media player or not (I guess it's but I forgot how to check) all that was on DVD Vista Ultimate 64-bit Dell reinstallation I did yesterday.

When I insert a CD in the Player tab extract, it will try to start but then stops and gives the error message in the column State of Rip. I try to read the CD and will play the first track, but then the rest of them came up with error messages.

I tried the Microsoft Fix - It tool, but he did not find the problem.
I made sure I had the latest drivers/firmware for my CD/DVD drive via hardware tech support Dell
I tried to download the updates of the multimedia player by microsoft, but the stand-alone installer says "the update does not apply to your system"

Any help in diagnosing this problem is sincerely appreciated!
Thank you
Jeff

OK I now reformat the C drive and did a clean install of the vista 64 bit SP1 disc and download updates from windows update... see if that would help solve this problem

Tags: Windows

Similar Questions

  • my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

    my Media Player shows no music, or rip music of the inserted disc. What can solve this problem

    Hey Lucky,

    You can try the steps in the follwoign and check if it helps.

    Method 1:

    You can try to rebuild the media player library, and then try to extract again

    This problem can occur if the media library is corrupt. Rebuild the library and check if this solves the problem.

    Follow these steps:

    a. exit Windows Media Player.

    b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

    c. Select all files in the folder and then click on Delete on the file menu.

    Note: You don't have to remove the folders that are in this folder.

    d. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. exit Windows Media Player.

    b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

    c. Select the Media Player folder, and then click on Delete on the file menu.

    d. restart Windows Media Player.

    Method 2:

    You can also try to change rip settings and check.

    For more information, you can consult the following article:

    Change settings for ripping

  • My Media Player will not play my ripped cd just says can't find the files, but I can play the song if I find in my music via windows Explorer folder

    It just happened the only Album that the fact that I have other albums by the same artist, who do not have this problem when I go to click on the songs to play it says it can't find the file, it also doesn't let me remove them from the library? need help ASAP

    Hello
    This problem may occur if Windows Media Player is corrupted.
    Try the following and see if it helps.
    Method 1:

    Run the troubleshooter in Windows Media Player and check if that helps.

    Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter



    Method 2:

    Try to clear the database of Windows Media Player. To do this, follow these steps:

    a. Click Start, click Run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
    b. Select all files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.
    c. restart Windows Media Player.
    Note Windows Media Player automatically rebuilds the database.
    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
    a. exit Windows Media Player.
    b. If you run Windows 7, click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.
    c. Select the Media Player folder, and then click on Delete on the file menu.
    d. restart Windows Media Player.
    Note: Windows Media Player automatically rebuilds the database

    Method 3:
    Try to uninstall and reinstall Windows Media player from Windows features and check if it helps.

    Enable or disable Windows features: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

    Hope the information is useful.

  • __i have the vista operating system, do we Media Player I have and where can I find this info cannot access online stores

    woulld want to download streaming radio

    Hello

    ·         What happens when you try to access the store online?

    Windows Vista comes with Windows Media Player version 11 pre installed. To check the version, you can

    (a) open Windows Media Player

    (b) click theHelp tab at the top left of the screen.

    (c) in theHelp list, click Windows Media Player, and that should open a window of information, including the version of windows media player.

    You can not download Streaming radio on your computer. You can use Windows sound recorder to record the radio or use for third-party applications.

    http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player Version 12 new problem rip CDs: no album info.

    I use Windows Media Player 12 on Windows 7 Home Premium OS V..  I was rip CDs to this computer for years without any significant problems and have hundreds of CD in MP3 format in my library of music.  When I recently tried to rip a new batch of CD, the albums were coming all up as 'Unknown' album & artist, "track 1, track 2,... and follow n for the titles of the songs."  After the investigation period, a pop up window would come saying "Windows Media Player cannot download information on the media for this CD... "What has happened to WMP and how to fix it?

    HI - the first necessary check is if nothing has changed after a recent update for the media player (you may remember being asked to set your preferences) view of library in WMP go to 'organize' - 'options' and check that internet access is authorized and in the privacy, the "online display media information" tab is checked. If these settings are correct, then we will study more deeply... Thank you - r.

  • Windows Media Player won't let me rip a CD, the error message indicates that they cannot find the file

    Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014.  Rich.T

    Hi Rich!

    This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html

    See you soon
    Julia

  • Windows media player will not sync with my device rises the error in the status of the synchronization

    I ripped a cd to my windows media player - I then entered in the sync tab and dragged the album I had just torn off sync - it comes then a full synchronization, please click here for details when I click this, it displays error - I clicked on the Red 'x' and read the following it is not possible to get the certificate to the device. Contact the device manufacturer for a firmware update or other measures to address this problem. My camera is a Sony Walkman - I have previously synced

    Hello

    Thanks for posting the question to Microsoft Community.

    Let us try the following and see if that helps:

    Method 1: To resolve the problem, try to disconnect and reset.

    See your device manual for specific instructions on performing this procedure.

    Method 2: Check on the Sony Web site for any solution on this, also try to update the drivers for the Sony Walkman device firmware.

    For more information: Understanding sync errors and warnings:

    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-sync-errors-and-warnings

    Note: The article above also applies to Windows 7.

    Windows Media Player sync: frequently asked questions:

    http://Windows.Microsoft.com/is-is/Windows7/Windows-Media-Player-sync-frequently-asked-questions

    Hope this information helps. Response to help you further.

  • Windows media player will not install due to incompatibility of the language.

    I have windows XP sp3 and when I tried to update my Windows Media Player (WMP), I first installed the wrong language. So I downloaded the English version which indicated to me, due to a mismatch of language, uninstall current WMP to procceed. so I used the utility to Add and Remove program but WMP is to love not the case, so I check in Add / Remove windows components and Windows Media Player. After a reboot, I tried to install WMP and he always says the same thing. What should I do?

    It's OK now. I had to reinstall Windows XP because I got a serious driver problem that is not related to the problem. Also, I just had to be very careful it have the right Installer. Thanks anyway.

  • Windows Media Player will not play WMV files

    Windows Media Player will not play WMV files, I get the following error:

    "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

    Evaluating is not a problem

    Other file formats work well

    Any reflection on a fix, I have already searched the web for a fix, it appears, this is a common question, but nobody has a solution that works

    Hello

    Method 1:

    FIX: Windows Media Player 11 cannot play WMV files that contain multiple video streams

    http://support.Microsoft.com/kb/947403

    Method 2:

    I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow the method 1To disable audio improvements.

    a. Open Sound by clicking on the Start button, and then clicking Control Panel.

    (b) in the search box, type sound, and then click sound.

    c. on the playback tab, click speakers and then click Properties.

    d. click the enhancements tab, and then select Disable all enhancements checkbox.

    Method 3:

    I suggest to create a new user account and check if you're able to play the files. Click on the link below to create a new user account

    Create a user account

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Thanks and regards.

  • DVD Player reads discs since the installation of explore 9 on vista operating system

    My laptop dvd player will not play discs from installation to explore 9 on the vista operating system.  The light showing a disc in the drive, the disc drive is in the Control Panel, but the disc cannot be read. He asks me to insert a readable disc.   I've restored my system, still does not.

    Someone knows how to fix this?

    Hello

    Give this link a glance and follow the steps listed by SpiritX MS MVP. http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-cddvd-drive-doesn

    I hope this helps!

  • My Windows Media Player will not rip burn or play or read any CD.

    My windows media player will not rip burn or play or read any CD.

    He will play only the files that have been ripped off.

    What gives? Help

    original title: Media Player

    Hi d. douglas,.
    Try these troubleshooting steps:
    Solve problems in Windows Media Player
    b Eddie

  • Windows Media Player will no longer play videos WVM from my local computer.

    Windows Media Player will no longer play videos WVM from my local computer. It just hangs and the circle keeps going around and around. I "ve waited nine minutes and the video never played WVM. I don't get the error messages.

    Consider this case closed, please.

  • my Media Player will not rip CD; error code c00d10d2

    Media Player will not rip CD. error code c00d10d2

    Hi kenny blair

     

    You can check if the methods provided for a similar problem in the below link passes the problem-

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/unable-to-rip-music-using-Windows-Media-Player-11/8d8ccf1b-6959-4844-8aa3-3aac7d9efa1a

     

    I hope this helps.

  • Windows Media Player will play is no longer my local computer .wmv videos.

    Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

    Windows Media Player will play is no longer my local computer .wmv videos. There is no error message. The circle just keeps going around and around and after as long as 9 minutes, the video still has not played.

    =================================
    If it is a recent issue... it may be worth trying to do
    a restore of the system at a time before everything started.

    Windows Vista - system restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Using Windows 7 or Vista System Restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows updates will not be installed. Windows media player will not play. Latest updates failed, error notice: 800703EE, 800b0100, 80070026. AVG says security "update server failed" help!

    Help! Last year, Internet Explore kept closing (Data Execution Prevention) so I switched to Firefox, which is great, but since then Windows media Player will not work. Moved this year on the campus of the University and since then (using the University proxy server) install windows updates is no longer. It's a new laptop me issued by the University last year, is come pre-programmed with Vista and Office, Media Direct and other programs, most of which I didn't use.  Technical support here at uni cant/wont help... can you?

    Trudy,
    Try the following and let us know the results.
    Run these tools:

    System File Checker

    The system update tool

    Take note of the results of the System File Checker.  Then after you run the two, run Windows Update.

    You are able to update of AVG?
    Any other antivirus (i.e. Norton, McAfee, etc.) has already been installed on this computer?
    When you say 'Nothing' that you tried to install?
    If you disable AVG and then run Windows Update you get a different outcome\error?

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Why I can't make video call after upgrade the latest version?

    It's really makes me confused. I can't do for the Visio with my friends after update the latest version of Skype. I use PC / laptop here. In fact, I have a cam here. Give me a solution, if I can do for the Visio again as usuall with my friends Thanks

  • Live Webcam stream QR reader

    Hello I'm working on a live webcam QR reader so I'm doing this... but I don't know why it is not stream contineously?

  • acquisition of data do not appear on the measure e/s

    I have instaled just my DAQ6009 and my labview and data acquisition do not appear on the I/O measure on labview function palette. It used to work when has been instaled on my old computer. The daq6009 appears at tree-MAX. Did someone knows what can h

  • Tracing of data from CSV file to XY Chart

    Hi all I need to read data from a worksheet (*.) CSV) and then to trace in LabVIEW. The file contains three values Time, Date, temperature value For example, here are the Logs. 16:46:59,31/01/14,+018.2C16:47:59,31/01/14,+018.2C16:48:59,31/01/14,+018.

  • SLR/DSLR EOS lens compatibility

    I have several goals that were used with model Canon EOS 750 photo 35mm film SLRs. These lenses will work with all current Canon EOS DSLR models (or models of digital SLR cameras is no longer produced, but I might be able to buy used)? Thank you.