Similar Questions

• Windows Media Player 12 will play only the first 50 minutes 80 minutes that he engraved on a 80 minute CD

  I burned music CD - Rs using WMP 12. Each CD has a capacity of 80 minutes, but my CD player and WMP will play only about 50 minutes of music. The entire playlist will appear on WMP, but when I choose a song towards the end of the list there is no audio data, even if the clock. CD with less than 48 minutes of music playing throughout the.

  Hi - I suspect that this will be the cd burner (burners on laptops later model do not appear to be a stain on those allows us to get in office more than 10 years computers back) while the disks I burned my laptop play OK in WMP - troubles begin when I read on my Sony CD player. I've seen this on 3 mobile different CD burners - up to about 40 minutes OK - thereafter, useless!

  I suggest to a previous poster that if she was likely to want to burn regularly that she needs to invest in an external USB recorder - she did and now fortunately Burns decent discs again. It is a relatively small investment and depends on your likely usage level.

  Another point that I always do; buy a small pack of CD - RW so that you can test different options (and also to test burn projects) without losing write - once discs. Don't expect results without error on their part: they are not as stable as CD - R, but can save burn a lot of roller coasters!  -Cheers, Ric.

• Satellite P855-307 is not play the latest Blu - ray discs

  The Toshiba Blu - ray disc player is is more grateful or play the Hollywood movie Blu - ray discs.

  The recent Hollywood film set of Blu - ray discs in both my Pioneer HDD-Recorder/Blu-ray player and play on my PS3, it is why blu - ray discs are fine.

  Drive Blu - ray on the satellite p855 works so I can play Blu - ray movies non-Hollywood on my Satellite P855 (e.g. "in the shadow of the Moon") as well.

  This also indicates that the Toshiba Blu - ray disc player software can work, so something else is preventing the operation.

  BIOS 6.80 VICTORY
  Version of Toshiba - 1.05.207 Blu - ray disc player.
  Is Blu - ray zone B and 5 changes remain (never has been changed).

  There is no firmware update on the support site of Toshiba for the BD - ROM Pioneer BDC - TD04S.
  Satellite P855-307 runs the original OS (Win 7 HP 64-bit).

  Read the Readme to Toshiba Blu - ray disc player mentions AACS key renewal, although I don't see any way mentioned anywhere by which's made it.

  Corel WinDVD is of no assistance as a player, as well as the trial version of WinDVD 11 recognizes only Intel HD4000 graphics.

  Trial version of CyberLink PowerDVD can't read Blu - ray Disc movie Hollywood but will play non-Hollywood films such as "In the Shadow of the Moon".

  It seems you have a problem to play only some specific BD discs.

  I m not quite sure that your problem, but from my point of view it may be a problem of firmware of BD player. Unfortunately, Toshiba driver page does not only updates the firmware for the BD drive so will not be able to try a firmware update.

  I put t think there is a problem with the playback software (Toshiba Blu - ray disc player) because it seems that you are already using the last available Toshiba Blu - ray Disc version 1.0.5.207 player. If the software is already up-to-date.

  However, the freeware VLC player software/tools are supported BD disks too and play almost all formats and file standards.
  Recommend you test just to see if the problem still occurs even by using such usefulness of these tools.

• How can I get the speakers to play from the Blue-ray/DVD instead of the TV home theater system?

  My wife and I just bought a Sony Bravia TV and Blue-ray Disc/DVD Home Theatre system. We hung the blue-ray to TV using the HDMI cable and hung stakeholders for the theater House for blue-ray, but the audio single system who will play is TV. I can't get the home theater system speakers to work. How can I make them work?

  Hello Eric,

  Alternatively, you can follow the link below to listen to the sound of television through the speakers of the Home Theater System (HTS).

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1000587

  Make sure that the TV speakers are disabled in the TV menu.

  If my post answered your question, please mark it as an "accepted Solution".

• Helpppp! my flash table will play only the first image

  my flash table will play only the first image

  This is the code

  stop(); 
  var t:Timer=new Timer(100,0);
  t.addEventListener(TimerEvent.TIMER,preloadF);
  t.start();    
  var rdmFrame:Array = ["15","150","420","589","712","807","1135"]; 
  
  stage.addEventListener(MouseEvent.CLICK, fnClick) 
  
  function fnClick(e:MouseEvent):void 
  {          
  trace(rdmFrame[numberRange(0, rdmFrame.length)]); 
  } 
  
  function preloadF(e:TimerEvent)
  {
      if(this.framesLoaded>7)    
      {
          t.stop();        
          t.removeEventListener(TimerEvent.TIMER,preloadF);        
          t=null;         
          this.gotoAndPlay(numberRange(0, rdmFrame.length - 1));     
      } 
  } 
          
  function numberRange(minNum:Number, maxNum:Number):Number 
  {          
          return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum); 
  }
  

  Ned Murphy wrote:

  Back through ALL the suggestions that I offered and use them.

  HA! I'm sucha dooofus!  Yes it works! YAY!

  Stop();

  var t:Timer = new Timer (100.0);

  t.addEventListener (TimerEvent.TIMER, preloadF);

  t.Start ();

  var rdmFrame:Array = [15,150,420,589,712,807,1135];

  function preloadF(e:TimerEvent)

  {

  if(this.framesLoaded>7)

  {

  t.Stop ();

  t.removeEventListener (TimerEvent.TIMER, preloadF);

  t = null;

  this.gotoAndPlay (rdmFrame [numberRange (0, rdmFrame.length)]);

  }

  }

  function numberRange(minNum:Number,_maxNum:Number):Number

  {

  return (Math.floor (Math.random () * maxNum));

  }

• Deleted files still show in Media Player and not all songs transfer

  original title: Media Player not working not properly.

  A couple of weeks ago, I deleted several music files, but that they always show in Media Player. If I try to play them it says file has been changed or moved. Also when I try to transfer an album for my mp3 a song or 2 will not transfer. It shows, but that does not sinc.

  Any ideas on how I can fix this? I have Windows 7 Home Premium.

  Thank you Vicki

  Hi Rachel,

  Thanks for your help.

  I tried it & it didn't work but I was checking other messages on media players & I found this.

  Uninstall the Media Player

  Step 1

  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. browse the features of media (develop) and uncheck the brand in the face of Windows Media Player.
  4 restart the computer

  Step 2

  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. browse the features of media (develop) and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  I've tried it & it worked. Initially, there was no change so I've let it go & 10 min later that everything was back to normal. It must have reset the media player. I wish I could find this post once again to thank :)

• Qosmio X 500 does not read some Blu - Ray

  Hello
  I just bought the last James Cameron Avatar in Blu - Ray collector's edition.
  When I enter the DVD inside and try to read it with WinDVD BD for Toshiba, I get a RED SCREEN that show:
  -----
  WARNING
  An update must be performed to your Blu - Ray player to play this disc.
  Please check wth your Blu - Ray provider and follow the instructions to update your Blu - Ray system.
  -----

  Problem: There is no update of the Blu - Ray Toshiba update list.
  I tried to update the
  -Bios
  -DVD player
  With currently the most recent version of today, but even so, the Blue Ray cannot be read on the Toshiba Qosmio X 500.

  Thanks for the help.

  Thanks for the comments

• I burned a dvd (memorex dvd + r) with music in the background. He will not play on my blue-ray player or dvd player, why?

  I burned a memorex dvd + r w/music & need to know how to make it play on my home dvd system... any help... Please, it's a mother's day gift.

  Maybe your reading material does not support DVD + R.  See its documentation.

• How can I fix my dvd player so it will play the DVD

  I ordered a new DVD player on amazon, he came straight from China. Now it will not read the dvd. and there is no region tab change the region in the dvd drive properties.

  Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region.

  Hello

  Check with the support of creating DVDs, their online documentation and drivers.
  Troubleshooting and ask questions in the forums about known problems. Don check
  for Windows 10 compatibility.

  Click with the right button on the Start button CD/DVD Player - Device Manager - double click
  the player - driver tab - click on Uninstall - then OK - reboot the computer for
  reload the driver. If no help go back and try to update driver, and then click OK.

  More troubleshooting.

  1. control - troubleshooting - hardware and audio Panel - configuration of a device.

  See if this resolution of the problems of aid.

  2 Panel - Device Manager - DVD-CD drivers - right click on the disk -
  Driver tab - uninstall the drive - and then restart the computer

  3 see if this helps:

  FIX: DVD drive not detected in Windows 8/10
  http://www.intowindows.com/fix-DVD-drive-not-detected-in-Windows-8/

  =====================

  If necessary we will test the CD/DVD player to see if it works at all:

  Try this to see if the drive is viable at all (you will need to make of these on)
  another computer since your willingness not to not start - XP, Vista, 7, 8/8.1 or 10
  (or even under Linux is not serious). You can also try to start with
  another drive in Windows - any OS but do not use it to try to repairs
  unless it's absolutely the same version of Windows on your system - just
  start to see if the drive works. You can even make a boot Windows 10 DVD
  disk by running the creation of Windows Media tool (on any computer)-

  Tool for creating Windows Media (make 32 or 64 the two same disk as the operating system
  the version you are using.
  http://www.Microsoft.com/en-us/software-download/Windows10

  / Settings (BIOS/CMOS) often F2 then watch the display as launch you - set
  the order of boot on CD/DVD first. Don't forget to when.

  Or ry boot from a Linux boot disk.

  If the player does not start to these then there no or there is other equipment
  problems that affect it. However, even it doesn't start that does not mean there is
  other functions not possible some hardware problems affect the reader.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  System Rescue CD
  http://SysRescCd.org/Main_Page

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  Check the wiring of course that nothing is not loose.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer dell laptop will play only dvd video, but no audio CD... I have Vista Basic

  When I try to open the audio cd by going to the E: drive... it makes me want to burn the disc and prepare this blank disc, enter the title of the disc.  Here's the new music not blank CD? I tried several windows FixIt for Media Player, drivers cd / disk drive. He is used to automatically start playback drive with media player each time I would enter a cd?

  Hello

  1 are there any changes or updates made on the computer?

  2. What is the full and exact error message?

  3 are you facing this problem with a particular audio disk or other drives too?

  4. are you able to open the same audio disc in another computer?

  Method 1:

  I suggest to see the link and try to run the fix - it.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  I also suggest you to see the link and check if that helps.

  Play an audio or video file

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file

  Let us know if it helps.

• My new laptop will not play download wma files it says that he will play only wav or mpe - suggestions?

  I bought a Samsung Galaxy Mini recenly and can not download music files, I think it's because it does not recognize the .wma files, but my laptop does not download my cd to WMA - of the suggestions...

  Hello

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/us/support/

• tapping on a track from the album will play only one continually

  Tapping on a track of the album reads that a continally

  You have certainly repeat turns. From the Manual:

  Play music

  Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  • Press on to move to the next song.
  • Press on to return at the beginning of the song.
  • Double click to play the previous song in an album or a playlist.

  

  Skip to any point in a song. Drag the playback slider. Decrease the speed of friction by sliding your finger to the bottom of the screen.

  Share music. Press on , then choose a sharing option.

  Shuffle. Press on to play your songs in a random order.

  Repeat. Press on to repeat an album or a playlist. Double click to repeat one piece.

  More. Press on for additional options.

  If still problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  Unsync/delete all the music and Resync

  To remove all music go to settings > general > use > storage > storage management > music > tap Edit in the top-right, then press the sign less than all music

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• Windows Media Player does not all videos from my camcorder.

  Have used Windows Media Player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  original title: windows media player

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code.

  Or try VLC player, it's a free video player that supports videos from sony.

  Or you can convert the video sony video wmv, and then you can use windows media player to play.

• Video clips will play only for a second before stopping in Movie Maker

  I am experienced with Movie Maker, but now when I try to set up a series of video clips, the video only play for one second (literally) before coming to rest. I tried several video formats without success. I am currently on updates and have never had this problem before. WMV files are choppy and slow and sometimes stop, too.

  Hi NessaWest,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  I suggest that you disable audio and video filters in Windows movie maker and check if it helps.

  Video and audio filters are programs that are installed on your computer that help interpret video files so that they will display and play correctly. Windows Movie Maker uses when you import a video and audio, extract your project on the table of storyboard / timeline, and when you publish a movie.

  (a) open Windows movie maker

  (b) click on Toolsand then click Options.

  (c) click on the compatibility tab.

  (d) do one of the following:

  ·        To turn off a filter, clear the check box next to the name of the video filter.

  ·        To activate a filter, select the check box next to the name of the video filter.

  ·        To restore the default list, click restore all defaults.

  When you restore the default settings, the list and the filters settings are given to the last known good setting.

  Video filters in Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Vista Media Center recognizes not all Postal Code / Zip to download a TV guide from__

  We tried to download a TV for our Media Center guide. When we enter the postcodes happens only with "no list available available for your region or the region." We have installed all the updates available and even tried the example of postal code, but it just says: the above every time.

  Hello

  Here are solutions to some common problems you might encounter when downloading information Guide in Windows Media Center. See the methods listed in the articles below and check.

  Troubleshoot Guide downloading problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  Set up the Guide listings for use in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.