medical usb device

Similar Questions

• Why not my Macbook Pro to manage over 3 USB devices?

  To make music, I need 3 usb devices. However, my macbook has only 2 usb ports. I thought that using a hub usb can help, but every time I plug 3 devices (one on macbook and usb hub with two usb devices), one of the devices does not work.

  For example, I have an audio interface, a mouse and a keyboard. When all three are connected, the midi keyboard does not work (is not recognized). When I unplug the mouse, the keyboard is recognized.

  There is no work around for this? It would be a problem with my usb hub?

  The devices have their own supply or is the hub, a powered hub? If it's a powered hub connecting all three devices inside.

• C870-14 t and Win7 - undetected webcam - USB device unknown satellite

  Hello

  Since then, the webcam on my wife's cell phone is no longer in effect.

  I checked the Device Manager and I have a unknown USB device. so I downloaded the drivers on the Toshiba site.
  After installation, the web cam HD made its appearance in the Imaging section.
  When I run the software Toshiba "application web camera" she lights the camera then the blackout.

  I check back up Device Manager, USB unknown device is in the list and "HD Caméra" disappear...

  Of course, I would avoid the reinstallation

  It is not easy to say what the problem is here especially if the cam is detected by the system, again and again. It seems that the system can detect the device connected, but it is confusing to me why preinstalled driver works correctly.

  At first try please enter the BIOS settings and check if there is option for webcam. If yes do not forget it is activated correctly.
  Try to please repeat the action with the installation of the driver just to see if the same thing will happen again.
  In the case where this webcam is properly recognized again try to test it with another application like Skype webcam. The same thing happens again?

• Satellite Pro m USB devices connection problems

  Hello visitors and insiders.

  can someone help me, please? - or are the causes of the problems of programmed BIOS is not perfect?

  I put on the USB Ports (I tried all 3 Ports) after correct installation of the most recent drivers for devices and the BIOS and chipset.
  I tried MAGIX encoder by USB and PINNACLE for USB encoder - both signal-request-problems and the two could not shut down the system after connecting with USB and close with her current for USB device.

  I tried this on different WinXP installiations (multiboot) - but on all systems even.

  The same reaction has been, as I have connected a special CUSHION cooler for laptop with additional USB Ports.
  The CUSHION cooled - but the USB Ports do not work for all devices (devices I am familiar with the)
  Ports of origin of the laptop, has failed to TRIM, too). (worked directly devices: mouse, webcam, keyboard, drive hard usb)

  What should do? .. If anyone know Somethin ' help... I will be very happy.

  Thank you very much!!! (Sorry for my English is not perfect)

  Ben

  Is what model of laptop exactly?

  Have you installed Windows yourself? Or it was preinstalled?

  Looks like it's a software problem, bad drivers USB can at fault.

  You are able to back up your data and run recovery?

• Portege A100 PPA10A - update the BIOS to boot from a USB device

  Hello

  I have an old Portege A100, model: PPA10A-0002LP, but I can't seem to find this model on any Web site of Toshiba, closest I've seen is the "PPA10A - 0002 L'.

  I am wanting to know if there is a BIOS update that will allow me to boot from a USB device.

  The question I have is that I need to reinstall Windows, but the CD ROm cannot read disks.
  This network PXE boot, but I'm new to this sort of thing and have absolutely no idea what to do here.

  Any help would be great,

  Thank you

  Hello

  Portege A100 seems to be developed solely for the Australian market.
  As you say it is a model number Portege A100 PPA10A - 0002L listed on the Australian page of Toshiba Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A
  So in my opinion, the BIOS should work too.

  Anyway, I doubt that the BIOS update will add boot options.

  Usually the BIOS supports booting from CD/DVD drive, drive HARD, LAN and USB FDD.
  It should be possible to boot from a boot disk using a USB FDD drive.
  I doubt you'd be able to boot from USB WEIRD since this Portege A100 supports an internal CD/DVD drive.

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.

• Toshiba 40L7363DG doesn't play subtitles on videos from USB device

  Hello
  My TV does not read the subtitles on videos from USB device.
  Anyone knows how to market, or does it 40L7363DG Smart TV Toshiba supports subtitles of USB device?

  Hello

  I ve checked s manuals for your laptop and the 70 page is clearly describes how it works. Check it out please.

• Satellite M60: USB devices do not work

  Hello...
  I have a Satellite M60 and all USB devices with microphone (webcam, VoIP phone) do not work.

  If someone could help with some suggestions, I would be grateful.

  Hello

  What do you mean by "not working"? The operating system recognizes external USB devices?
  Have you installed the drivers of these external USB devices?
  I also have a webcam and I had to install the drivers provided to use the device.

• Satellite L500-1XL - rejecting playing a USB device and music jump

  Hi all

  Has anyone else had problems above? Even for other laptop models?

  So today it keeps rejecting the USB devices, but has accepted two just now - but rejecting the rest. I rebooted several times and no use. Reading music continues to jump, it sounds terrible and the laptop is sitting still, being not moved. I can't update the driver of DVD player even following the instructions perfectly - he insists
  It is not the right model, when I checked in the Device Manager...

  Any ideas? Thank you!

  Hey,.

  What operating system is installed now?

  Maybe you need to update the chipset and the audio driver. The two you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Check this box!

• Equium P200-1ED is capable of powering connected on USB devices?

  (1) possibly associated with my previous question - what is someone able to confirm if the Toshiba Equium P200-1ED is able to power external devices connected via its USB ports?

  (2) all 6 USB ports can supply simultaneously 6 external USB devices?

  What's wrong?

  Please notify.

  I assume you ask again for advice related to this issue:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=115026#115026

  To my knowledge, all USB ports supports the USB standard and provides 500mA.
  But sometimes a USB device requires more than 500 my and then you will have to use an external power supply for the USB device.

  Sometimes it s advisable to use a USB hub that supports clean power.

  (2) can all be used 6 USB ports to power simultaneously 6 external USB devices?
  As I said, the external USB devices possibly some 3rd would need more like 500mA and in this case, you must use an external power supply to USB devices.

  Good bye

• Equium P200-1ED is able to power external USB devices connected on it?

  (1) is anyone able to confirm if the Toshiba Equium P200-1ED is capable of powering an external USB device connected to it via one of its 6 USB ports?

  (2) what is the maximum power that the Toshiba Equium P200-1ED can provide only one USB port?

  (3) can the Toshiba Equium P200-1ED providing the power referred to in Question (2) above to each of its 6 USB ports?

  Please don t after several markets on the same subject.
  After you recommend first one:

  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=115025#115025

• Satellite Pro L10: USB device not recognized

  Hi all
  need help on this one. Any USB device connected to one of the USB Ports on the laptop comes with a "unrecognized USB device. One of the USB devices to the computer failed error message". Running WXP SP2 and all updates.

  Any ideas how to get around this?

  Concerning

  Hello

  How devices connect and what devices are connected to the USB ports?
  However, try this:

  Unplug ALL USB device.
  Open the Device Manager.
  View, show hidden devices.
  Uninstall all devices under USB controllers.
  Uninstall all devices in storage Volumes. Say no to all reboot prompts until you are finished. In addition, if a storage Volume doesn't uninstall, ignore her and move on to the next.
  If you have a yellow? with unknown devices, uninstall all of the entries there as well.

  When finished, reboot TWICE.
  Reconnect the USB devices and see if they are properly recognized.

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Tecra A11 - 11: BSOD when plugging in USB devices

  Help. We have several laptop Tecra A11 - 11 to different schools * ALL * with the same problems.

  When the laptop is up and running if a USB device is plugged into one of the USB ports the laptop flashes a very quick BSOD and dies. What is more remarkable with interactive whiteboard USB connection. If that is connected when the laptop is turned on the swift BSOD happens 9 out of 10 times.

  Laptops are downgraded to XP Pro using the Toshiba DVD downgrade. They run on a Server 2003 domain.

  I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request. No difference. I was told last week she was refitted and I would soon hear. I called today a week later and wsa said she had not yet been raised.

  We bought these thinking they were large laptops with a lot of future proofing not much good if they are not fit for purpose. Children are missing out on an education smoothly through these problems that Toshiba do not treat.

  In addition to this when a non admin user screen resolution of trhe grave at 800 x 600. With the help of a utility shortcut Toshiba Zoom view (Fn + SPACEBAR) you can switch this back as an interim solution, but it is still pending as a flaw.

  Any help is greatly appreciated. Many teachers and many children you will be grateful too.

  Hello

  It's a little difficult to say what are the causes of BSOD.

  > I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request.

  Have you tried a utility chipset?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Find your model and install