meeting place for Dell 3845 pro 8 screens stays on when stop and reload.

Similar Questions

• Meeting place for Dell 8 Pro + Windows 10 + No Sound Drivers OK

  Does anyone else have a problem with their coming 8 Pro?  I have upgraded to Windows 10 and everything seemed fine, then a few days ago the sound has stopped working.  The sound icon had a red in the taskbar as if 'X' cut and I couldn't turn on the sound.  The scroll bar does not, even on the physical switches.

  I unloaded the driver and rebooted and it seemed to accept and had no errors in Device Manager (I tried both later and regressed to a previous version of the driver... no luck).  The slider bar has worked and it was reactivated without doubt.  I did a test in the sound setting menu, and he reported that he was unable to play.

  So I did a factory restore Dell Windows 8 and the sound is back.  So good, it was not a hardware problem.  But we have all found their fair will stop working on Windows 10 (worked great for a few months now)?  I don't have my heart set to level my meeting place for 8 to 10 Windows because everything I do on this machine is to surf the web, but I think it will be a possibility.

  This true isn´t at all. I found a workaround. I downloaded the Dell booth 8.1 Windows

  

  then I went to the Device Manager and clicked on both devices under "Audio - video - and Gamecontroller" the names of these two devices are 'Intel ESS Audio Device (WDM) and "IS2 Realtek Audio Codec".

  

  Do right click go to properties and chose to update the drivers

  

  Choose "desktop search".

  Choose "from the list.

  Choose "install device".

  

  

  Now search for Drivers for Win 8.1 in the cabin - you should probably remove it with software like 7zip

  '5830-win8.1-A06-KY92D.CAB\5830\win8.1\x86\chipset\PKVD4_A05-00\Drivers\Audio\ '.

  Here you can find the files INF. choose them, install it and restart your computer. Do the same for devices stand in Manager.

  After that, you can see two drivers if by clicking on choose in the list as in the screen above. Ensure that you have chosen the one of 22.11.2013.

  Now you should make it sound now, from time to time, it is necessary to reinstall the 2013, but it works fine for me now.

  In constance. His important force windows to use this old pilot, only try to install a new and chose that an older version causes windows always using the new driver for windows 10.

• Meeting place for Dell 8 Pro - load / start up

  Hello

  I've read two or three other messages indicating 'place of Dell 8 pro does not start' & the issue by holding button twice.

  I seem to have a different problem here.

  My dell place 8 pro starts not to bright screen, no dell logo, not seeing (orange/white).

  If I put it to charge (using the dell charger), white light is on & then after 5/10 minutes it turns off & then there is no light regardless of how long to load I put it on charging.

  Pls advice, are there centres of dell authorized service in/all about delhi, India?

  Waiting for launch...

  MM

  Hello

  I've read two or three other messages indicating 'place of Dell 8 pro does not start' & the issue by holding button twice.

  I seem to have a different problem here.

  My dell place 8 pro starts not to bright screen, no dell logo, not seeing (orange/white).

  If I put it to charge (using the dell charger), white light is on & then after 5/10 minutes it turns off & then there is no light regardless of how long to load I put it on charging.

  Pls advice, are there centres of dell authorized service in/all about delhi, India?

  Waiting for launch...

  MM

  Hello

  As there is no light from the screen or the Dell Logo at startup, which suggests a hardware problem

  I suggest you contact the Dell Support in India for assistance as to where their Service centers are located,

  http://www.Dell.com/support/contents/in/en/indhs1/article/contact-information/customer-support/customer-support-phone-numbers

  See you soon.

• Meeting place for Dell 5855 Pro 8 its fluctuating level

  The sound from the speaker on my new venue Dell 8 Pro 5855 seems to be up and down randomly. This issue does not affect the built-in loudspeaker, the headphones work fine. I tried to update the drivers, do an image restore factory and various applications, nothing seems to help.

  Is this a firmware issue, or is there something wrong with my speakers?
  It is running Windows Pro 64-bit 10.

  It was definitely a hardware problem. I sent it to Dell and they replaced the motherboard.

• Meeting place for Dell 8 Pro - where is preinstalled Microsoft Office?

  I recently took a tablet of Dell place 8 Pro 64 GB (model 5830). That's great, but it was announced on the box as having Microsoft Office Home Student Edition 2013 pre-installed, but I can't.  All I can find is a tile of start menu to buy Microsoft Office 365.

  How and where can I get the free version of Microsoft Office Home 2013 which was announced?

  Thank you.

  I just checked my box again.  It came in a transparent plastic bag, approximately 5 "square.  The Interior is a brochure with instructions in some 50 languages.  The cover of the booklet has the key activation/product on the outside label.  I saw this label first, and tried to enter the label bar code which is glued to the outside of the package.  It's probably why I had a problem.

  Is the part that I forgot when I answered you, there was also a paper in the called package, Dell Software Installation Guide.

  He is told to go to office.com/getoffice or click here for Office 2013, where 'Click here' as a link points in an image of a window (which I assume you would see if you clicked on the desktop on the splash screen).

  The link to be click on says "already purchased a different version of Office?

  That link above are (?) figure: "I already bought Office 2010", 'Go to the Office purchases online' and "Try office free for a limited time".

  Hope that you do not lose this small label/certificate with the activation code, but as I said, he finally just asked my Microsoft account number.

• Meeting place for Dell 8 Pro - where are the double arrows directed for sizing columns or windows with a mouse

  None of the applications show double arrows cabbages (<|> or <->) when you place the cursor on a bulkhead to adjust the width of columns or on an edge of window/corner to resize the window.  It occurs throughout the Tablet, files, Excel Explorer, Media Player, etc...  Dell support was useless, that they said to talk about Microsoft who said pay $99 or the book of sand.  Does anyone have a solution?

  When you connect an external mouse, they come back?

  Just guessing, but they exist on 8.1 Pro laptop using the built-in pointing device AND screen touch my Desktop Pro 8.1 AND the V8P when using the mouse, but absent on the desktop AND the V8P when using touch. Limitation of the touch driver?

  This will probably keep me tonight.

• Meeting place for Dell 8 Pro 5855 - delete the recovery partition?

  I just bought a place 8 Pro 5855. I did a recovery USB disk. I was wondering if there is a way to remove the recovery partition so that I can retrieve this internal storage space. I could try something like EaseUS or MiniTool, but I was wondering if there was another way that I wasn't aware of. Is there a reason why I should not delete the recovery partition? Thank you!

  This is how I did it:

  1. run Diskpart (from Run or CMD prompt), don't worry he'll ask the elevation to Admin

  2. type: select disk 0 (main SSD)

  3. type: list of partition (to see the available partitions)

  4. type: select the partition 6 (my recovery partition, yours may be different)

  5. type: delete partition replacement (deletes the partition 6)

  6. type: select partition 5 (my Windows, to the area to recover partition deleted)

  7. type: extend (retrieves the space)

  8. type: exit

  It worked for me on the DV8P 5830.

• Meeting place for Dell 8 Pro - retain charge / turn on?

  I got this tablet 7 months ago. I barely used it. I went to turn it on after in plugging it up to charge and nothing.

  The screen is black. Load cookies are the only things that actually work.

  He'll turn for an orange to white. And he's going to act like he is in charge, but once I have the disconnect, the entire Tablet is dead.

  He has been in charge for DAYS and no luck.

  I'm very aggravated by the present.

  I hope someone can give me a help?

  I tried now pressed the power button several times repeated other positions, and that did not help.

  Thank you-

  Hi James,

  I'm sorry to know that your question has not been resolved.

  If you do not get the OEM logo, then it might be a hardware problem.

  I suggest you to contact Dell for assistance.

  To contact Dell technical support, see the link below:

  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Hope this helps, let us know if you need more assistance.

• Meeting place for Dell 11 Pro 7130 power button / stop does not work

  I just bought this camera and can not get the power button to turn on the screen and off as suggested by the manual should be possible.  If I press and hold the power button then it made a stop hard and if I held down when turned off it will vibrate for a second and then turn on, but a short press does nothing when Windows is running.

  Tried short diagnostics and no problems found. Updated the BIOS to the A13, the drivers updated to the latest versions of all available installers, updated firmware screen scanner and camera. I saw a post from early 2014 with the same question where someone suggested to put it off to quick start, but that has not changed anything either. All Windows updates have been applied.

  How can I get the power button to work?

  If after trying a few things more that I decided to give at the moment and made a sweet sleep on the desktop shortcut, so I had a quick way to get at least the screen turns off. The command to execute is: rundll32.exe powrprof.dll, SetSuspendState 0,1,0

  This seems to be more than Hibernate because it should boot from the bios whenever it turns on (although the arguments given him say no to the hibernation), but it was better than nothing.

  I tested it worked a few times then rebooted the system. When I did this he decided to install updates which he said yet that all were waiting. When he started upward the power button now works.  I don't know what has changed or if the execution of the order makes a difference, but at least it works now.

• Meeting place for Dell 8 Pro

  I have what I think, a newspaper really stupid in the name.  I could never think of him.  I tried to find out if I can change but have not found a way.

  My only thought is to create a new account on the table and remove the account "stupid name."

  Someone at - it another idea or advice?

  

  Is that what you meant? http://Windows.Microsoft.com/en-us/Windows-8/change-Microsoft-account-name

• Meeting place for DELL Pro 8 - option missing sleep after updated

  I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode.  SLEEP option is completely missing the Tablet remains on constantly even when not used.

  The updates that I applied are

  Pilot series Intel Atom Z3000

  Running reliable engine Driver Intel

  5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband

  I've found a workaround.

  I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager.  This would indicate that the problem is with the driver 5570 Wireless.  I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.

  I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.

  In the end, I updated the Windows operating system files and installed A03.  Could not get A04 or A05 works not at all.

  It is clear that these updates have not been tested on the site of Dell Pro 8.  I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.

  The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly.  In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.

  The iPad is a fantastic table.

• meeting place for Dell pro screen flashing on make or receive a call

  Hello

  My place of dell pro screen start flashing once the call is established. Sometimes, the screen remains black as if swithced off. This happens all in making a call or once I answer a phone call. The touch screen is disabled for the duration of the call. Once the Group at the other end disconnects screen becomes active again. I called dell support and they advised to reset to the factory settings. Tried, but the problem still persists.

  Please tell us what needs to be done.

  Thank you...

  Hello

  Had the same issue, but took off the protective film that came with the phone and resolved immediately.

  The default phone has a battery mode that disables the display when it in next to you ear and an appeal is in economics.

  Seems the protective skin band prevents the phone to detect when its next to your ear

• Meeting place for Dell Pro 11

  I was installing updates for place of the 11 meetings and I have installed security tools Dell who was in my update folder when I did an automatic scan of the place 11. I can connect is no longer my place, any ideas how I can return to my system to remove security tools? Any help would be appreciated, thanks, Paul.

  Hello Paul,

  I spoke with tech support and they have a resolution which should you up and running quickly. Please contact support and let me know if you hit roadblocks.

  RGS

  Jimmy

• Meeting place for Dell Pro 11 (5130) unexpected shutdown due to agitation

  Dear Dell,

  I just bought a Dell 11 (5130) with full update (new version) from Dell and Microsoft. However, I still get this problem of the unpleasure:

  No.1 : The Tablet run perfectly if it is on the table, on the case of orders (I do not have any keyboard dock)... However, just bring it or shake it, the shelf stops suddenly.

  Sometimes, I can't turn it back on the shelf (press power button / stop and not start upward). I use alternating current, the tablet on and the battery is being charged (90%). Then, break the alternating current, the Tablet stops suddenly. To activate the battery, I need to reopen the battery.

  ---> I think this question because of the (physical) connection between the battery and the tablet.

  No.2 : The shelf stop the charge when the battery reaches 91%. However. in Dell Power Manager it show battery #1 à 91 %, excellent health, battert battery setting: Standard.

  What this means: after 2 months using, I lost 9% battery and never again get 100%?

  ----------

  I live in the Viet Nam, I send my tablet to Viet Nam from Dell to get repair?

  Thanks a lot to study my case

  Your batery is set to recharge to 90%.

  Go into the bios it you can change it to 100%.

• Meeting place for Dell 8 3840 Applications keep crashing

  HI I had place Dell 8 3840 (new model) but I have a problem of application will crash everytime when I used.

  Specifically the Google Chrome browser, I just can't browse any Web site using the chrome browser. some site I opened there keeps crashing all the time. Several times I reset the Tablet, erase browsing data everything. But the problem could not be solved.

  Please help if you know how to solve the browser crashing the question on the meeting place 8 3840.

  Thank you

  I will never buy a new Dell product - firstly, technical support said that there is not only the amount of RAM (sharp) left after loading the OS, which means that if you have several tabs open in a browser, it will run out of memory. I found this point until after the use of the Tablet more than 30 days (49 to be exact) and when I tried to return, they said thanks for your efforts trying to solve this problem, but now that you're beyond the window of 30 days return, too bad - we can send you to the technical support. I tried to climb and they said the same thing - they don't care my or your company, or what is right.

  I / we never will only buy Dell products-our Organization eng and sales will go with someone else who is more concerned about the customer satisfaction.